Indication of virtual copy developing Module

Similar Questions

• Bought a stand-alone copy of LR in 10/2013.  Received a message that the development module is disabled.

  I upgraded from LR 4 LR5, buying an stand alone version of Lightroom 10/2014 (less than three months ago) for my PC.  According to Adobe's HELP, I downloaded a second copy of the software on a new Mac in preparation for the switching of computers and discontinued using the original version of the PC.  I had to hire a consultant to assist in the transfer of pictures due to the absence of specific instructions from Adobe on a PC to Mac transition, but in early December, the transition has been accomplished and LR (now 5.7) worked for about two weeks.  Shortly after the development module has been disabled by a message that I needed to renew my membership to reactivate the develop Module!  I've never had a membership... I bought the stand-alone version of the software and want to use it rather than the version of the subscription.

  Added to all of my problems with the transition, is that we have welcomed guests for the holidays and I couldn't show them one of my recent photos by the development being disabled module.   (My guess is that Adobe is not going to compensate me for this inconvenience!)

  AFAIK, it's nothing that I did on myself.  Adobe allows the download of two copies of the LR software I have not exceeded which, I called Adobe Help specifically to ask how to accomplish the transition from Mac PC and and told to download the LR for the Mac software.

  So, how to re-enable the module development without paying extra money for a subscription?

  But to answer your question directly, you have installed installation creative cloud of Lightroom that requires different licenses. You must uninstall, then download from the stand-alone Web site.

  Updates

• How to create a virtual copy without copying the settings?

  Hello world

  Sometimes I will edit a photo and later decide I want to create a virtual copy and take a different approach. The problem I'm having is that when I do, the virtual copy inherits all the adjustments that I brought to the previous copy and I can't compare my new adjustments against the original photo, not adjusted.

  I know I can remove the adjustments on the virtual copy by pressing "Reset" in the develop module, but when I then make some adjustments and do a side-by-side comparison, it compares the adjusted version that the virtual copy has been done since.

  I hope this makes sense. Does anyone have a solution?

  Thank you!

  Did a little more research and it looks like the clichés probably better serve my needs that VC in this case.

  Lightroom questions: Snapshots vs virtual Copies - Lightroom Killer Tips

• Keeping the steps of dev for virtual copy

  Hello

  I made a lot of progress on some images, and I forgot to create virtual copies before they develop. I now have to have back the original version, imported and want to keep the current version developed as a virtual copy. I tried the following: copy all the parameters of development, to go back in history, to create a virtual copy and apply settings at the virtual copy. Basically, it works one I return the version original one the current version, developed as a virtual copy.

  However, the virtual copy doesn't show the steps of history to get there. Is there a way to have the virtual copy shows the steps exactly as it would if I did all the developents in him in the first place?

  Thank you

  McL

  Library module > Photo > set as master copy

• Problem with the virtual copy exports - JPEG vs DNG

  Hi all - just a quick question - I have a set of photos developed in LIghtroom that include several virtual copies of which I now want to export to in the form of final versions on my hard drive. All virtual copies are B & w versions of the masters (post-processing work also differs slightly on the top of the b & w preset).

  I need a patch of JPEG and DNG files.
  Export to JPEG files seems to work without a hitch and all the pictures come out like in Lightroom.
  Exporting DNG however come with a question - all virtual copies come out as images themselves IE. not virtual copies, but they are more b & w as they are supposed to be, but go out like color.

  Color version masters come out well. Exports of virtual copy have different look (as expected) and the file size slightly different (also planned?) suggesting this only thing missing for me is the parameter b & w.

  I have tried everything to fix this problem with no use - export the virtual copies separately etc. As already said - JPEG works, but DNG does not...

  Someone at - he experienced this and if so any suggestions on how to fix...?

  Thks a lot!

  V

  DNG files are 'RAW' files - they cannot be changed.

  You can export only B & W versions as (pixel database files) as JPG or TIFF

  You can export copies of a DNG, but they are still RAW.

  You can embed data in a DNG file (containing similar to XML with the NAVE sidecar files and raw CR2 files), but editing will be visible in software that can interpret the raw data (like Lightroom or ACR)

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• In CC, the develop module will not respond.

  I just removed Lightroom 5.1 and went Lightroom CC.  However, the development module will not be resonpond. At the suggestion of someone, I went into preferences and tried to disable the GPU, it too would not respond.

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical CPUs: 4

  Processor speed: 3.3 GHz

  Built-in memory: 11671,2 MB

  Real memory for Lightroom: 11671,2 MB

  Real memory used by Lightroom: MB 716,9 (6.1%)

  Virtual memory used by Lightroom: 871,7 MB

  Memory cache size: 178.1 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2, AVX

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1080, 2) 1680 x 1050

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  AMD Radeon HD 7660D

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13399 context 15.200.1062.1004 the base profile

  Renderer: AMD Radeon HD 7660D

  LanguageVersion: 4.40

  Try to disable the GPU outside of Lightroom:

  Close to Lightroom. With Windows Explorer, navigate to C:\Users\ [username]\AppData\Roaming\Adobe\Lightroom\Preferences

  Open the Lightroom 6 Preferences.agprefs file in a text editor such as Notepad.

  Very close to the end of the file, there is a line that says useAutoBahn = true,- change that to useAutoBahn = false,

  Save and close the file. Now, try to start Lightroom.

  

• My performance of the Lightroom Develop Module does not work correctly.

  My performance of Lightroom is not great.  After you have installed the appropriate NVIDIA, GeForce card GTX 970 graph with 4 Gig of Ram, Windows 10 (latest version) with 32 Gig RAM and the latest version of Lightroom CC (2015.3), I am always facing update slow in the develop module image.  The software does not remember the excerpts that I created (1:1).  Whenever I click on a photo of the flows, the share of the image of being clear-> blur-> to clear, which take about 15-20 seconds.  This happens even though I have already generated previews 1:1 for all images in the catalog.  I need help to set the settings so that I can have a good experience with lightroom.

  I tried to follow some recommendations:

  1. leave a 160 Gig camera Raw Cache framework

  2. install an SSD for the start and placed the catalog Lighttroom and Cache folder under the default Images directory, under the my account profile

  3. has created a new catalog that is less than a few LIVE in size

  Posted below is my System Info.   Is there anything else I can do to make this work?  It's very frustrating!

  ---------------  SYSTEM INFO ------------------------------------

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.5 GHz

  Built-in memory: 32717,7 MB

  Real memory for Lightroom: 32717,7 MB

  Real memory used by Lightroom: 925,4 Mo (2.8%)

  Virtual memory used by Lightroom: 1086,4 MB

  Memory cache size: 0.0 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2, AVX, AVX2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1200

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  GeForce GTX PCIe/970/SSE2

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 359.00

  Rendering engine: GeForce GTX PCIe/970/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\Johnny\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\Johnny\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) home canon Plugin

  (2) Facebook

  (3) Flickr

  (4) HDR Efex Pro 2

  (5) attachment Plugin Leica

  (6) home Plugin Nikon

  (7) perfect B & & W 9

  (8) perfect effects 9

  (9) perfect improve 9

  (10) perfect photo Suite 9

  (11) perfect Portrait 9

  (12) resize perfect 9

  Config.LUA flags: None

  Map #1: Seller: 10de

  Feature: 13 c 2

  Subsystem: 29783842

  Revision: a1

  Video memory: 4008

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  I uninstalled Lightroom CC.  renamed the Lightroom to my profile folder, rebooted the PC.  Reinstalled lightroom CC, choose to create a new lightroom catalog, any of a local session of my C:\ Image folder.  The behavior is the same.  Lightroom does not remember previews and continuous 'loading' and make turn the wheel little whenever I click on an image of the band.  It's crazy...

  You're clicking on between images in the Strip to develop? The develop module does NOT use 1:1 previews. Those that are used only in the library. Develop, Lightroom must load the raw file and return each time, this isn't a good solution to quickly go through images to work to develop. It should take a few seconds to fully make a new raw image loaded it depending on the size of your images are. If you want to speed up switching to develop image there are solutions. One is a raw cache big camera, that you already use and secondly to disable acceleration of graphics card, which, if enabled, slows down the initial loading. Finally, you must ensure that you are the 2015.3 or the 2015.1.1, and that you do not have 2015.2. Version 2 had several bugs that could slow this process terribly.

  15-20 seconds is extremely long for this process of loading in my experience. I can't get it to be slow on a much less powerful system than if the files are > 500 MB high resolution stitched tiff files. Not with RAW files (I pull a 24 Megapixel). If they are raw files, something is wrong. You have turned off the facial recognition?

• LR download RAW folder backup against opening a file in the develop module? Can I use the same folder?

  IM thoroughly; is confused.

  Starting from a camera card, I import RAW images or "copy as DNG" in LR.

  I create an original backup for security reasons.

  Then, what's next?

  I go back and 'Add' of these original files in LR, see them in the develop module?

  How to create a file of edited images?

  Thanks for your help!

  DNG files and the record, in that they must be visible in the library module and module development. If they are the last images you imported you want to see in the section "previous import." You would work on DNG files. The backup of the original raw files is for archival purposes in case you lose your DNG files at some point in the future and need to replace.

• Why is Lightroom 6 crashing develop module after 2-3 actions?

  This issue just started 2 days ago, I updated Lightroom and updated my Intuos Pro driver, catalogs has changed and nothing is fixing the issue. The reason why I have forget my wacom tablet is it seems not to recognize LR is open and after that literally 2 to 3 actions to develop module just crashes if I close LR. By coincidence, it was 2 days ago, I was pompted to update my graphics driver, surely not the guilty do you think?

  I'm on a pc and my system info is as follows...

  Can anyone help? Generally, these things get bang in the middle of the wedding season, sigh...

  Lightroom version: 6.1 [1025654]

  License: Perpetual

  Operating system: Windows 7 Enterprise edition

  Version: 6.1 [7601]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 2.6 GHz

  Built-in memory: 12279,1 MB

  Real memory for Lightroom: 12279,1 MB

  Real memory used by Lightroom: 1041,7 MB (8.4%)

  Virtual memory used by Lightroom: 1036,1 MB

  Memory cache size: 377,2 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1680 x 1050, 2) 1920 x 1080

  Entry types: Multitouch: no, built-in touch: no, built-in pen: Yes, touch external: no, external pen: Yes, keyboard: No.

  Graphic processor News:

  AMD Radeon R7 200 series

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13397 context 15.200.1046.0 the base profile

  Renderer: AMD Radeon R7 200 series

  LanguageVersion: 4.40

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: E:\2015\Weddings\Hayley & Neil\hayley lightroom\hayley lightroom.lrcat

  Settings folder: C:\Users\Phil\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) attachment Plugin Leica

  (6) home Plugin Nikon

  Config.LUA flags: None

  Map #1: Seller: 1002

  Feature: 6613

  Subsystem: 22b 01458

  Revision: 0

  Video memory: 2028

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: LR5x102

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  You can find the location of your preference file in this document: file preference and other files. Lightroom 5

  Then, you open this file with any text editor, and make the changes indicated.

• Cannot access the Lightroom Develop module more

  My copy of long-standing, personal to Lightroom, I cannot use the Module to develop more.  Now, I get the message: "develop module is disabled.  If please restart Lightroom and connect to the creative cloud. ' Why?  I do not know.  I've never subscribed to the creative cloud.

  The biggest problem is that there is no way to access the creative cloud even if I restart Lightroom.  No CC box does rise.

  I just want to be able to reuse my Lightroom program.

  Help!

  SW

  Hey Stan,

  Please refer to the threads below where the issue has been addressed:

  Lightroom 5.5 'develop module is disabled. Please renew your membership to reactivate the develop module.

  Lightroom Develop module is disabled. Please renew your membership to enable the develop module.

  Lightroom 5.5 'Module Development disabled, please renew your membership '.

  Kind regards

  Sheena

• Image not appearing is not in the develop Module

  I've seen a number of discussions on this, but unfortunately the proposed solutions do not work.

  When I access the image in the develop module it will show initially, but a setting I'll do the image not displayed (they do in the browser preview in the upper left corner), generally the image then disappears. After that, when I select the image it leaves a white screen where the image should display.

  When the question first, I checked and the GPU acceleration could not be turned on due to an error. I went and updated my driver, but unfortunately I have an AMD Radeon 7670 graphics card and I discovered the hard way Lightroom CC is not compatible with this graphics card and the latest driver so when I accessed to develop module lightroom instantly if is crushed, regardless of whether or not the graphics acceleration was lit.

  • AMD Radeon HD 5xxx series 8xxx graphics card run versions 14.501.1003 & 14.502.1014 driver

  I was able to go back to the older version of the driver, 13.152.0.0, Lightroom will run without crashing, but still have the original problem, I can't use the develop module.

  Any suggestions? At this point, I'm tempted to restore the previous version of Lightroom, but I'm hoping to avoid that, as I have ingested, the tag and assessed to nearly 2500 pictures and would really prefer to keep this work.

  Version of Lightroom: CC 2015.1 [1025654]

  License: Creative Cloud

  Operating system: Windows 8.1 home edition Premium

  Version: 6.3 [9600]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.3 GHz

  Built-in memory: 16322,1 MB

  Real memory for Lightroom: 16322,1 MB

  Real memory used by Lightroom: 948,9 MB (5,8%)

  Virtual memory used by Lightroom: 928,0 MB

  Memory cache size: 59.2 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2, AVX

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 2560 x 1440

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: Yes, keyboard: No.

  Graphic processor News:

  Check the supported OpenGL: failed

  Vendor: ATI Technologies Inc.

  Version: 3.3.12422 context 13.152.0.0 the base profile

  Renderer: AMD Radeon HD 7670

  LanguageVersion: 4.30

  GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS (real = 32, minimum = 48)

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: K:\FILES_0001\lightroom_catalogs\lightroom_catalogs_0002_150709\lrcat_all_0003_130613_lr5 \lrcat_all_0003_130613_lr5-2.lrcat

  Settings folder: C:\Users\Sean\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) HDR Efex Pro 2

  (6) jf PicasaWeb

  (7) attachment Plugin Leica

  (8) export of LRT

  (9) attachment Plugin Nikon

  (10) perfect B & & W 9

  (11) perfect effects 9

  (12) strengthening the perfect 9

  (13) perfect photo Suite 9

  (14) perfect Portrait 9

  (15) resize perfect 9

  (16) PhotoShelter

  Config.LUA flags: None

  Map #1: Seller: 1002

  Feature: 675b

  Subsystem: 6888103c

  Revision: 0

  Video memory: 1003

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Out of DP AMD (AMD High Definition Audio Device)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  Looks like a problem of ICC profile.

  try to set your monitor to sRGB, or re - launch your calibration software (IE; XRite Colormunki)

• Develop Module Question

  I am a new user of LR.  I have an iMac, OS 10,10,4 and CC PS and LR CC versions.  I really like quick settings that can be made in the develop module.  When these adjustments are transferred to the original photo or the do, they are transferred.  I make the adjustments in LR and then look at the image in the Finder and nothing has changed with the original and there is no copy of the original...  When I opened the photos in PS, it's like start over with the adjustments.  What I'm doing or not doing correctly?

  Thank you.

  This is the concept of LR - not destructive.

  Your originals stay intact. To view the results with an external program, you need to export, where your changes are "cooked."

  Read here: using Adobe Photoshop Lightroom | Export photos from Lightroom

  And here's how to get to PS from LR to edit and return to LR... https://helpx.Adobe.com/Lightroom/help/editing-Photoshop-or-Photoshop-elements.html

• "Develop module is disabled" after free trial even if I bought the upgrade LR5

  I bought the LR5 upgrade to upgrade from LR3.

  I tried the iCloud 30 day trial of the LR5 to be sure it worked with my raw D750 files which it did very well.

  Now the test expired but my copy of the LR5 says that I must "renew my membership to reactivate the development module.

  Since I "Own" LR5 should not ask for a renewed subscription.

  Suggestions?

  eugenef33876021 wrote:

  Suggestions?

  Look at the links on the right under 'MORE LIKE THIS', and/or the forrum for error of research.

• Develop Module - Invisible jump and misregistered Brush tool.  Skip the previews.

  Lightoom worked great for me since the time of the beta.

  But now in the develop Module:

  The brush and tool spot does not, the watch cursor only when I get to the area of the image.

  When I leave the area of the Panel (to enter the area of the image) the cursor jumps and moves diagonally about an inch.

  The brush and tool spot 'paintings' in a different place when the cursor is

  Glimpses of grid charge/jump to their new fom harvest their old.

  Help, please!  Thank you!

  SYSTEM:

  Lightroom version: 3.5 [775451]

  Version: 10.7 [2]

  Application architecture: x 64

  Number of physical processors: 8

  Processor speed: 2.0 GHz

  Built-in memory: 8192,0 MB

  Real memory for Lightroom: 8192,0 MB

  Real memory used by Lightroom: 558,3 MB (6.8%)

  Virtual memory used by Lightroom: 2663,8 MB

  Size of the memory cache: 387,4 MB

  Exhibition: 1) 1920 x 1200

  I use a mouse.

  Apparently, Apple broke it and they have to fix.

  http://feedback.Photoshop.com/photoshop_family/topics/brushes_not_working_on_2011_macbook _ air