Indicators of

Similar Questions

• indicators red green and yellow are grey, I have accidentally uninstalled something in the "login items", but don't know what or how to replace. Thank you!

  indicators red green and yellow are grey, I have accidentally uninstalled something in the "login items", but don't know what or how to replace. Thank you!

  You have probably changed the OS X. go theme color in Preferences-> general systemand pass ' appearance: " "Blue ".

• When I go to the Yahoo stock charts my table settings and technical indicators are not saved. Is it possible to keep these settings, perhaps by saving cookies?

  When you open the stock charts of Yahoo, is there a way to allow Firefox to remember the changes I make when viewing stock charts, including the parameters of the chart and technical indicators? In the view of the chart Explorer comes as I left it on previous visits while Firefox deletes all changes and I have to get them whenever I revisit. In Explorer, I believe that these changes are stored in the form of cookies, but in Firefox I can't seem to find a way to resolve the problem. I got Firefox to delete cookies when leaving.

  Firefox Orange button > Options > Options

  • Privacy > history
    • Choose > history

  To learn more

  • https://support.Mozilla.org/en-us/KB/enable-and-disable-cookies-website-preferences

• Is this a bug or I use bad indicators in userChrome.css

  I wish I had my auto-hide bookmarks bar until I move my mouse on the location. I found a code earlier to do it, but I've never really tried so far with FF4. When I put the code and move the bookmarks bar in the Panel of the obligation to hide, it works fine until I open a new window or exit / restart of the browser.

  #PersonalToolbar {display: none;}
  #navigator-toolbox:hover > #PersonalToolbar {display: -moz-box;}
  

  Auto-hide to the hover works very well with the box, but the bookmarks bar is completely empty. No arrow, just empty space. Whenever I commented the line in userChrome.css, the buttons reappear. When I move the bookmarks bar and then reactivate the line and restarting, the buttons are fine when I move them in back and forth until the next exit.

  I tried this on three machines (all Windows 7, 32-bit and 64-bit), and the behavior is the same. I also tried to disable all the modules and extensions without change in the results.

  Is this a bug or I have the wrong indicators used (-moz - box)? Thanks for all the ideas/help provided.

  So bad, I don't think it works.

  ---

  I think that display: - moz - box is correct.

  What happens if you try to change a style different, such as the height attribute?

  /* Bookmarks Toolbar */
  #PersonalToolbar {height: 1px;}
  #navigator-toolbox:hover > #PersonalToolbar {height: 26px;}
  

• After the upgrade to firefox 4 he eliminated the norton toolbar, and when I go on a site indicators let me know if the site is secure are gone.

  before I did the upgrade to firefox 4 it used to be indicators such as green points with hooks or gray points with an exclamation mark let me know if the site is secure. the norton toolbar has been replaced by a yahoo toolbar and the secure site of identity has disappeared. thought I was doing myself a favor of the upgrade, but now I'm not sure. should have left well enough alone and kept what I had.

  Symantec needs update their Firefox Add-ons to make them compatible with Firefox 4. They indicated that, for Norton 360, they plan to release a update of Norton 360 to support Firefox 4 in early may - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web & docurl = 20100720113635EN & ln = en_US

  I don't know about the time scale for the updates for other Norton products. Waiting for the update by Symantec, if you want to use Norton modules, you will need to downgrade to Firefox 3.6.

  Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

  Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

  I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

  For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

• Satellite L750, stopping and flashing orange indicators

  Hello
  Sometimes my l750 stop automatically (like if I removed the AC adapter) and power light and battery indicator two begin visualized in amber but still white Indicator DC IN and that while the battery is not connected to my pc
  I saw this case once when the battery is connected and the AC adapter also, the same indicators blink and DC IN still white but the system still works and the pc doesn't stop. and when I shut down the operating system, only power light continues to blink at the slow pace.

  Note: since a long time, I have a problem in the AC adapter cable, and I have to plug it in a way for the cable won't move or try not to touch or move the cable do not cut the power source. I think it is jailbroken at some point within the cable.

  Thank you

  Looks like a hardware problem, maybe mainboard or cable DC.
  An FSL can fix.

• Satellite L50 - B - 1 M 9 - indicators not lighted

  Hey guys,.
  Unfortunately, my first post is a small problem.
  I bought a brand new Satellite L50 - B - 1 M 9, everything works well except my indicators for Wi - fi and battery. I am talking about the small LED lamps on the front right-hand side of the laptop. I use Win8 64 bit and so much worse if wi - fi is on / off battery uses DC or not these two indicators remain lit all the time.

  Can you help me with this one?

  Greetings from Varna in Bulgaria!

  Hello

  This strange s that the two indicators should operate as follows.
  WiFi/BT indicator should amber lights when the BT or WLan is enabled.

  DC IN / battery indicator shows the condition on the DC-IN and charge the battery. White color indicates that the battery is fully charged, so that feeding properly.
  The LED would change to amber if the battery is partially charged or it s not charged.

  Anyway, if there is no feature of LED sign, I guess there must be a problem with the hardware of LED. I think it would be a good idea to check the unit by the authorized service provider.

• The indicators are not lighting on Satellite series

  The light is yellow, the others do not work. The laptop turns on, runs on battery, everything, but the indicators do not work. What can be the problem?

  Hello

  just a quick question: is your laptop work properly. (Except that the indicator thing)? If Yes, you have two options:

  1. you can accept.
  2. you can try another adapter (if available)
  3. you can try it without the battery inserted. Just remove it.
  2. you can send your machine to a service partner chartered for a checkup of material (if you need a link to find the service partner near, it's here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT)

  Otherwise I have no suggestions for you since I really Don t know what is wrong with your machine, but I guess something with your powersystem is not OK.

  Welcome them

• Dashboard of the LabVIEW data recover indicators of the poll

  Hello

  I have attached my entire project, including the error messages that I receive. I have my labview VI to put in place to have 3 different screws. My entries, my global entries and my "side". I created my web server and all the controls and indicators that I linked. However, when I try and run the dashboard of data project, all my indicators have error signals indicating that he "could not connect to the server. I have no idea what I'm doing wrong. Any ideas?

  The reason why this does not work, it's that your web service code is not quite structured reason. When you call a web method in LabVIEW it does is run the VI related to this method. In your case you have mapped to the URL http://host:8080/FINALCOAST/COAST.vi SIDE, and then you have a poller to web service linked to this URL. When you run your dashboard the poller accesses this URL, which causes the web server of LabVIEW run COAST.vi. If you look at COAST.vi, however, you will notice that what he does is run a loop that runs until the stop button is pressed. Is not supposed for a web method. He has no one to press the stop button. In fact, there is no user interface for anyone to interact with at all. This means that COAST.vi will work forever. Finally, data dashboard gave up and closes the connection because it should not take long for the web server that responds.

  So what is the correct way? It depends on what you're trying to do. In your case, it seems that you take just a bunch of inputs, do some calculcations and producing a bunch of outputs. You could do that in a VI with the method of a web that has just a bunch a bunch of outputs and inputs. In this case, you use just a web service calling (button) connected to one of the methods. Because this method has two inputs and outputs, you will get two entry and exit of Terminal ornaments around the button that you can use to connect to your commands (entered) and indicators (outputs). When you press the button it brings together the current values of the controls and those on the server to use as inputs to call your VI sends, and then he retrieves the results from the server and puts them in your indicators. In my example attached (see the file updated the dashboard) I show you how to do this. Note that I also modified the code of VI to create a Subvi for calculation of Basic code, and it is this VI which is used for the web service. This VI has no loop in him, so he just runs once with data values and returns the results.

  If you want to rather than having a continuous process that is continually measures your system in real time you need another way to access this data from a web service. It seems that that's what you were trying to do here, even if you use data in real time. Suppose that you were, however. In this case, you were a little close, but we need to make some changes. First of all, the running process doesn't have to be part of your web service. It may be, but it's a little more complicated. Instead of this, your process running (COAST.vi) can be just a regular VI running in LabVIEW. You just open and press run as usual. However, you want to only change VI to share its data with other processes. You have tried to do by using globals. Globals allow you to share data between the screws running in the same process, but web services actually run in a process completely separate (in the web server), so you'll need something else. A drop-in substitute would be shared network Variables. You'll see that in annex changed code I replaced your globals with shared variables. Then in your web service if you just use the same shared variables. Network shared Variables allow you to share data between processes (even on machines on the network) so that you can easily access the same data to both your VI running and your web service screw I modified your COAST.vi for this (and he calls the same Subvi from the calculation of the kernel).

  In this case, you could do just a single method "inputs" and only one "exits" method, but it might be better to break up to the less distinct modes which include the strongly bound values just to make things a little neater. It can be tedious to deal with a large number of terminals.

  Alternatively, once you use shared variables you has actually connect your controls and indicators on the dashboard of data directly to these shared variables. This has the disadvantage of requiring more ports to be open through your firewall (and you can not use security as you can do with web services), but for the use of internal network, it is easier to implement. To do this, just run your VI as before, and then as soon as it runs you can select each control or indicator in the dashboard of data, press the small button below, choose 'Shared Variables' and look for your variables on your machine. In this case, each control is directly bound to the variable, and so there is no need of a button. Changes that you make in the dashboard data are immediately placed on the server through the variable sared, and your VI (which is still running until you press stop) will see the new value, update the outputs and then repel these new values to the dashboard of data via other shared variables.

  I did not create a dashboard for the last two approaches, but if you may not know what I'm talking about, then I can create examples for those as well. The screw and the project must be configured to work in any case, if the only difference is in the configuration of the dashboard.

• Using aliases for the indicators, controls, procedures and calculated channels

  Hello

  I noticed that aliases do not appear in the workspace for the controls and indicators and procedures system Explorer and see calculated. Is there a way for them to appear? I need to use aliases because I like my definition of the system to control several test systems (which have different CAN report names). Otherwise my system definition would break every time I go to another CAN the database. I thought that the inability to address limited to the configurable alias controls add on, but it seems that VeriStand natively cannot address the areas I would like to also well done right click. Any recommendations would be welcome.

  Thank you.

  You are right that you cannot use alias in a file system definition for mapping purposes. It is an area that we hope to improve in the future. The initial design of alias was to serve as a public interface for the workspace, profiles of stimulus and so on. However, it is certainly a use case valid to be used as an interface in a system definition.

  A possible solution would be to create a set of user channels that play the public role of your interface in your system definition. Always use your user channels in all procedures, calculated channels and so on. Map your CAN channels on these channels to the user. Whenever you update YOUR database, you must remap the new CAN channels to the appropriate user channel. You can also automate this activity by importing a file delimited by tabs on the mappings page. The one drawback here is that your target will take a little more time to deal with these mappings.

• best way to control a large number of controls and indicators

  IM building a façade with 46 orders and lights, all of type boolean.

  the logic is control > send order series > receive > indicator set. I consider part of my façade (with 2 sets of control and indicator) and my block diagram.

  I have to be able to control programmatically and through the front panel individually the status and indicators, or all at once (for example to reset the both). This should be done from the tab they are and another.

  thought property nodes but still I would have 46 + 46 of them. same for local variables.

  y at - there I way to refer to a control/indicator by its label (string) and change its value?

  wouldn't be easier just to create two Boolean tables which maintain their Boolean value?

  Please advise me on what options I have. I'm new to labview.

  Thanks in advance.

  
  

• Use the indicator binary enum in the public Service but allow several indicators

  Hello

  I have a few clusters that contain enums where the user can select a value among many others. However, sometimes these enumerations are binary indicators and I want the user to be able to select more than one indicator at the same time, which will then be DSB. What I usually do is to have a table with the data type as enum, and I simply OR all the elements in the array.

  I was wondering if anyone has a better suggestion how to do that?

  Thank you

  M

  Use a listbox control, and then leave several items to select.  It returns an array containing the indexes of all selected items.  You can use it to find the values of mean to you every element of another table.  Or if the order of the elements in the array is just right, you can make a 2 ^ math function table and add the resulting table.

  

• A way to group controls and indicators on the Front Panel and that they can be made Visible or not as a group?

  I would like to combine several orders and LEDs on the front panel in a group in a way that allows me to do the whole group Visible or not.

  I tried to use a Cluster, but it has a side effect that all elements must be inside the controls or indicators, but not mixed.

  Is there any graphic element, like a panel that can contain other controls and indicators on the inside and make them Visible or not as a group regardless of whether they are commands or the LEDs?

  Good suggestions on how to do this?

  Thank you.

  The tab control is still not my favorite, appearance but it's a way fast and effective to show and hide groups of controls and indicators.

• Make controls/indicators in all the tabs display updated even if not visible?

  I have a Labview VI simple enough that I need to run in a loop of 10 ms. Currently, I can't get it runs at 17 m, there a RS422 with send and receive a message each 10 m I have a lot of troubleshooting indicators on a Debug tab. I wonder if these indicators are updated even if they are not on the currently displayed tab. If so, changing the property node 'visible' to all of these indicators will speed up execution?

  Thank you

  Well, there are other things, like putting your reading of the RS-422 in another loop or passed the data read in the transformation of producer/consumer .  Without seeing the actual code, it is difficult to give advice more.

• update of the cluster indicators

  Hi, I put a bunch of indicators in a cluster. Is it possible to update these indicators without going through another group of the same type with controls that are associated with indicators?

  Thank you.

  You can simply create a room of your cluster of the indicator and use it as a prototype for entry. See attached vi

• Control of data using multiple thermocouples via indicators and the waveform in real-time

  I apologize in advance for this question is probably a bit simple but I'm all new to labview and the forum and could use some advice. I have a CompaqDAQ with two 9213 16 modules of track and I'm trying to read in 30 thermocouples in a waveform, but also display 30 indicators so I can mark each indicator with the thermocouple for real-time tracking. Each thermocouple corresponds to a specific location and it is essential that the interface has an accurate indication or a label for each of them. I wonder if there is an easy way to do this in addition to split the signal and have 30 thermometers on my diagram? Perhaps a table any? If I use a table to create 30 thermometers, the DAQ assistant automatically sorts the thermocouples according to ascending numerical order. For example, would be the indicators of first and second on my interface automatically assigned to channels a0 and a1 of the first module, or should I do it manually? Even for the waveform?  Thank you very much!

  PS - Do not know if this message had need of more details, but let me know if more information is needed, and I'll give you!

  I see that you use the DAQ Assistant to create your task.  Now I understand why you may have about labelling.  It is easy of the seller NOR spiel booting...  But in any case, you already have a task to the MAX instead of use the DAQ Assistant?  The interface is similar and there may be a step or two, but your end application will be more effective and you will have more options with your data and properties.  For example, I tried to update the names of physical channel in the DAQ Assistant installation program, that it let you do, but it propagates that change forward to waveform chart legend.  Also, I don't know any property for this dynamic data type node, although I never use it either.  I suggest the setting up of your task and channels, Max if you'd give it a go.

  Since I thought I didn't really takes you all the way with you help, I wrote another one.  It uses a cluster, even if it's a bit barbaric.  I thought that there was a more eloquent way to do by changing labels, but I could not it works as I had expected.