Inferred entity instance IDs following the release

Similar Questions

• Specify a Limitation for the inferred entity Instances

  Hello
  
  Under the section 'rules that infer relationships and entities write' in the user's Guide, it is the
  Notes /Limitations
  
  (1) combining manually created instances with alleged instances is not allowed.
  (2) combining deducted from instances of entity with time values is not supported.
  (3) only one attribute of the entity instance can be deducted under the rule of the entity. For example, the type of benefit ("unemployment allowance") can be defined, but the amount of the benefit must be paid via a separate rule.
  (4) instances of entity deducted does not contain the attributes of base level.
  (5) a relationship that is involved in an inferred entity instance rule is considered to be an inferred relationship. This means that a rule of inferred relationship cannot be used to prove the same relationship used in a rule of inferred entity instance.
  
  Number 4 is a little more detail?
  
  Thank you

  I guess you know the difference between a basic attribute and an inferred attribute, so I did not explain that here.

  Point 4 simply means that all of the attributes that sit within the suspected entity instance must themselves be deducted, that is not the basic attributes.

  An example of what you can't do is infer an entity instance in the creation and then ask questions on this instance during execution.

  See you soon,.
  Jasmine

• Returns the value of the entity instance inferred relationship in determinations of SOAP

  Hey,.

  I had an original thread open that indicates the problem I tried to solve (as several Conclusion based on input values ). My rules database now behaves as expected and I can test it in the debugger, as expected, only now I can't identify it the actual return values, I wanted by using web service determinations.

  
  

  I get a whole bunch of entity instances inferred from a relationship deemed identical to the situation/screen shot at the bottom of the page "investigate an alleged relationship" on the Oracle policy automation Cloud Service Guide to the user, but in my SOAP response I get that bodies with chopped IDs. I want the real value of identification of the entity.

  
  

  for example, now get this:

  
  

  <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:i18n="http://www.w3.org/2005/09/ws-i18n" xmlns:typ="http://oracle.com/determinations/server/11.0/rulebase/assess/types">
     <SOAP-ENV:Header>
        <i18n:international>
           <i18n:locale>en_GB</i18n:locale>
           <i18n:tz>GMT-0500</i18n:tz>
        </i18n:international>
     </SOAP-ENV:Header>
     <SOAP-ENV:Body>
        <typ:assess-response>
           <typ:global-instance>
              <typ:attribute id="course_code" type="text">
                 <typ:text-val>AHPY</typ:text-val>
              </typ:attribute>
              <typ:entity id="the_supplementary_documents" inferred="true">
                 <typ:instance id="0x608c2dc220e15d8c"></typ:instance>
                 <typ:instance id="0x5b7e2d02e8780325"></typ:instance>
              </typ:entity>
              <typ:entity id="the_informational_documents" inferred="true">
                 <typ:instance id="0x19387621439a43c7"></typ:instance>
              </typ:entity>
           </typ:global-instance>
        </typ:assess-response>
     </SOAP-ENV:Body>
  </SOAP-ENV:Envelope>
  
  

  
  

  But I want something like below and I'm having a lot of trouble to figure out how to actually. Also is there anyone defines the meaning of the errors, you get the OPA? I tried to change my modules and I had a few mistakes of OPA-EXXXXX, but apart from the description you get in OPM, I can't find anywhere that gives more details on these and explains what they average and how to fix it.

  
  

  <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:i18n="http://www.w3.org/2005/09/ws-i18n" xmlns:typ="http://oracle.com/determinations/server/11.0/rulebase/assess/types">
     <SOAP-ENV:Header>
        <i18n:international>
           <i18n:locale>en_GB</i18n:locale>
           <i18n:tz>GMT-0500</i18n:tz>
        </i18n:international>
     </SOAP-ENV:Header>
     <SOAP-ENV:Body>
        <typ:assess-response>
           <typ:global-instance>
              <typ:attribute id="course_code" type="text">
                 <typ:text-val>AHPY</typ:text-val>
              </typ:attribute>
              <typ:entity id="the_supplementary_documents" inferred="true">
                 <typ:instance id="http://mydomain.com/mydocument.pdf">
                 </typ:instance>
                 <typ:instance id="http://mydomain.com/mydocument.pdf"></typ:instance>
              </typ:entity>
              <typ:entity id="the_informational_documents" inferred="true">
                 <typ:instance id="http://mydomain.com/mydocument.pdf"></typ:instance>
              </typ:entity>
           </typ:global-instance>
        </typ:assess-response>
     </SOAP-ENV:Body>
  </SOAP-ENV:Envelope>
  
  

  
  

  
  

  I managed to get this to work by referring to this thread: deducted entity instance IDs following the release

  I had tried something similar but not quite the same thing. In the end, my application looked something like this:

  
     
     
        
           
             
            
              
            
            
              
            
         
           
           
              
              AHPY
     
            
        
     
  
  

• Creating entity Instances

  Hello
  I am writing a custom code to create instances of entity. The code is given below:
  
  * InterviewEntityInstance iei is arg1.getScreenData () .createInstance ("the_children", "children", (byte) 0);.
  iei.setValue ("children_name", "Fox");
  arg1.getScreenData () .addInstance (IEI); *
  
  However, when I place this plugin and run it it gives me following error:
  *
  one: 242)
  ... more than 22
  Caused by: com.oracle.determinations.interview.engine.exceptions.InterviewEngine
  Exception: Entity Instance already exists in the model: the_children [the children]
  at com.oracle.determinations.interview.engine.data.model.InterviewUserDa
  ta.addInstance(InterviewUserData.java:87)
  at templates.handleEvent(templates.java:45)
  ... more than 27 *.
  
  So I maybe although the instance be already there so I tried to get this instance using getEntityInstance()
  But then, he said that there is not the entity instance in the model... the_children [the children]
  
  I don't get this strange behavior. Experts that you comment on this? Does anyone have an idea about creating entity instances using java...?
  
  Thank you

  Calling createInstance automatically adds the entity instance created in the InterviewUserData, so by doing this then addInstance() you are trying to add the same instance of the entity twice and therefore the error message...

  If you try to create a new instance of the entity, you need to set the InstanceStatus = 1 not 0. You should also make sure that you provide the entity instance name is unique and if you use 10.2 +, the parent of the entity instance instance is set correctly.

  I suggest that take you a look at the API document for these methods for more information.

• count the entity instances

  Hello
  I want to count the entity instances. OPA provides the same InstanceCount() function. However, only works if the entity instance screen is submitted. I want to make it work any any point. Any idea?

  To control a flow on a summary screen, simply create a Boolean visibility attribute:

  the flow is enabled if
     InstanceCount(the thingamies) > 0
  

  Then, set the attribute for visibility on the flow on the summary screen "the flow is activated" with a default state of persons with disabilities (or hidden). Then, it will be hidden when the number of instances is unknown.

• MG3100 scanner - can control digital rights on the release of pdf to allow comments?

  MG3100 scanner - can control digital rights on the release of pdf to allow comments?

  Hi fassettj,

  Allowing comments on PDFs created with your PIXMA MG3100 is not supported by using the software provided with your printer.  For these features, it is recommended that the recommended more complete PDF creation is used, such as Adobe Acrobat.  For more information, please use the following link:

  http://www.Adobe.com/products/acrobatstandard.html

• Dell Photo AIO Printer 962 does not. Follow the instructions in the configuration utility.

  Driver is there but does not connect. I can print alignment but not test. I tried all the suggestions, I found, but still won't work; even uninstalled and reinstalled with the CD. Follow the instructions in the configuration utility. I saw other people with the same problem. can't the difficulty of mine. It also tells the boot trying to remove the abnormal length. Xc0000005 code exception)

  Hi Ohdiane1057,

  Note: a patch is released for Dell AIO Printer 962 Photo, I suggest visit this community link provided below and try to install the patch and see if the problem is resolved.

  http://en.community.Dell.com/support-forums/peripherals/f/3528/t/19046379.aspx

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• After the release of sleep I get a message saying: "your computer is currently locked" after 30 seconds.

  original title: disorders to restart the PC after the mode "Eve"

  I have a laptop with Windows Vista Home Premium installed. I feel in pretty serious trouble when I try to turn on the PC again after putting in mode 'sleep' (or after it is disabled due to low battery). The sequence of events following the bifurcation is as follows:

  1. I turn the PC back on.
  2. a message appears on the screen after about 30 seconds saying 'your computer is currently locked' and there nothing else do.
  3. impossible to do anything else, I force close to the PC.
  4. I turn it back on and start the PC in "safe" as mode indicated in the display.
  5. when the process is complete, I complete the secure mode by turning off the PC.
  6. I turn the PC back on. It asks me to enter the password, and the rest comes on as it should.

  So I can go back to normal after this 6-step process is completed, which is quite annoying and refused to Office 2007 as scary because even this process did not work last week that my PC has become impossible to connect to the wireless network at home, at work, etc and I was able to use my PC again only after a system recovery which was a nice surprise for me.

  Any help would be much appreciated.
  Kind regards
  Bekaroglu Bulend

  Dear James,

  Thank you for that comprehensive answer. I apologize for my answer, that I was busy with other things and forgot this issue for now. First of all, 1Utilisez mode"still works and that's how I'm going to return to normal operation again. It does not eliminate the problem, however. I have not yet tried the methods mentioned by you. However, I did something else as follows:
  1. I removed the password from my account (I am the administrator)
  2. I left my laptop to turn off because of low battery
  3. I restarted the laptop

  And I managed to find a normal operation. I intend to use my laptop without password, I don't want to face the same problem again. (I guess that the problem will resurface if I started using a password again.)

  In both instances separated last week, I noticed also that my computer started a validation file of three steps and the process of compacting the files immediately after I put on. They went well. I'm not sure, however, they were of no help to solve the problem. My feeling is that they were not.

  Thanks again for your time.

  Kind regards
  Bekaroglu Bulend
  Istanbul, Turkey

• Fable III PC Retail - cannot activate the game. Windows-live should check the release date of your game make sure that your computer is connected to the internet.

  I just purchased Fable III PC Retail today and I installed and you get the following message:

  Games for Windows - LIVE should check the release date of your game. Please make sure that your computer is connected to the internet.

  No personal information will be sent to Microsoft. A LIVE ID is not necessary.

  As you can see I have an internet connection because I am writing this post. There is no button to push or anything to continue the activation process.

  The game was released in 2011 and 2012 is beyond the release date.

  What is the problem here?

  Using Windows 7 Ultimate Service Pack 1

  I7 2670qm processor

  16 GB of Ram

  NVIDIA Geforce GTX 560M / 3GB

  I found the answer myself. There is a bug in the commercial version of this game. In the pop up menu it is supposed to be a button that says "enter", but it does not appear then press just enter on the keyboard and all is well.

• Race of library slow when Alchemy app disabled in the Release version

  Hello

  I'm working on an application that an operation running through a library of Alchemy (written in C and exposed as .as) long.

  Here are the high-level logic to illustrate the idea:

  QNXSystem.system.inactivePowerMode = QNXSystemPowerMode.NORMAL;

  addEventListener (AlchemyLibraryEvent.PROGRESS, onProgress);

  addEventListener (AlchemyLibraryEvent.COMPLETE, onComplete);

  Call the library of Alchemy;

  private void onProgress(event: AlchemyLibraryEvent) {}

  update of the progress made in the user interface;

  }

  private void onComplete(event: AlchemyLibraryEvent) {}

  QNXSystem.system.inactivePowerMode = QNXSystemPowerMode.STANDBY;

  If app is in {disabled state

  QNXSystem.system.powerMode = QNXSystemPowerMode.STANDBY;

  }

  }

  In the bar-descriptor:

  run_when_backgrounded

  What happens is that the app works perfectly well (no matter the app is active, put off the power, the unit standby) in a debug build (by token of debugging).  However, when it is exported as a signed bar and running on the same physical device BB10, it normally only works when the application is active.  Whenever the application is disabled (when the screen is off, or app pushed back and another application is brought to the foreground), the application runs always, but at a very slow speed (about 1/15 of the original speed).

  I did some debugging and confirmed that when the application is disabled, she was continuing with NORMAL power at the rate of 60 frames per second, which seems to be quite normal.  What I don't understand is why the chemistry library runs a lot slower in the background in the Release version.

  As a proof of concept, I added the following code just before inactivePowerMode to NORMAL:

  NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;

  The build version will run at normal speed and the screen turn off.  However, if I press the device power button, or push the app thoroughly (and make another application in the foreground), he repeats the same behavior running slowly.

  Any ideas would be much appreciated!

  No, there is no way to take more CPU power when in the background. The operating system applies this to the user, so they have no apps churning through their battery on them. I would recommend that you inform users of this, so they can decide what they want to do. BlackBerry 10 is expected for the multitasking well, so I expect that they will enjoy and put the application in the background.

• Picture editor; How to follow the touch

  Hello

  first of all, I chose to develop a BlackBerry 10 app for my Masters project and needed a little help. I hope you guys can help.

  Requirement:

  I shud be able to paint on a picture to select the area. so being able to blur the portion of the image. for example, the background and the blur out.

  can someone help me please how I can achieve this?

  Thank you

  Copy the following code:

          screen_context_t screen_ctx;
      screen_pixmap_t screen_pix;
      screen_buffer_t screen_buf;
      int size[2] = { 768, 1280 };
      int val;
      char *pointer = NULL;
      int stride;
      /* Create the privileged context so that the display properties can be accessed. */
      screen_create_context(&screen_ctx, SCREEN_APPLICATION_CONTEXT);
      /* Create pixmap for the screen shot. */
      screen_create_pixmap(&screen_pix, screen_ctx);
      /* Set usage flag. */
      val = SCREEN_USAGE_READ | SCREEN_USAGE_NATIVE;
      screen_set_pixmap_property_iv(screen_pix, SCREEN_PROPERTY_USAGE, &val);
      /* Set format. */
      val = SCREEN_FORMAT_RGBA8888;
      screen_set_pixmap_property_iv(screen_pix, SCREEN_PROPERTY_FORMAT, &val);
      /* Set the pixmap buffer size. */
      screen_set_pixmap_property_iv(screen_pix, SCREEN_PROPERTY_BUFFER_SIZE, size);
      /* Create the pixmap buffer and get a handle to the buffer. */
      screen_create_pixmap_buffer(screen_pix);
      screen_get_pixmap_property_pv(screen_pix, SCREEN_PROPERTY_RENDER_BUFFERS,
                                                  (void **)&screen_buf);
      /* Get the pointer to the buffer. */
      screen_get_buffer_property_pv(screen_buf, SCREEN_PROPERTY_POINTER, (void**)&pointer);
      /* Get the stride. */
      screen_get_buffer_property_iv(screen_buf, SCREEN_PROPERTY_STRIDE, &stride);
          angleF = 0.0;
          bps_initialize();
          if (sensor_is_supported(SENSOR_TYPE_GRAVITY))
      {
          sensor_request_events(SENSOR_TYPE_GRAVITY);
      }
      int nbytes;
      Window *winId = Application::instance()->mainWindow();
      /* Take the display screen shot. */
      screen_read_window(winId->handle(), screen_buf, 0, NULL ,0);
  

  creates a buffer of your screen. You can get touch places of activities of the mobile finger (the number of pixels), add them to a list or whatever, then obtain a general rgb for the region value as follows:

  screen_get_buffer_property_pv(screen_buf, SCREEN_PROPERTY_POINTER, (void **) &ptr);
  
                  for (int i = 0; i < size[1]; i++, ptr += stride) {
                          for (int j = 0; j < size[0]; j++) {
                              // do your pixel reading here: r = ptr[j*4], g=ptr[j*4+1], b=ptr[j*4+2], alpha = ptr[j*4+3]
                              }
                          }
                  }
  

  Note that the code above is for an entire screen, so you will have to change accordingly. Once you have a general RGB value, divide by the total number of pixels that you went through to get a certain RGB (or choose another method that might be simpler). Restart the loop to repaitn pixels of same with the same color. BAM! you will have a uniform colour where you pressed.

• OS6.8, camera raw download 8.3, does not work with the NAVE of Nikon D750. I carefully followed the download instructions.

  I'm trying to get the ships of a Nikon D750 to open in Bridge6 or Photoshop6. I have 6.8 OS which is "is no longer officially supported" by Adobe. Which means I can't use the converter DNG 8.6 but there is a way around this - return to 8 DNG Converter, 3-if I understand? I carefully followed the download instructions, but still not put the NEF files to open. Any suggestions? Thank you!

  Unless you can find some software adobe not to open your Nikion D 750 nef files, I'm not sure that you will be able to open them using mac os x 10.6.8 snow leopard.

  The Nikon D750 requires in fact the but to be released camera raw 8.7 plugin or the 8.7 dng converter, neither of which works on snow leopard mac os x 10.6.8

  Adobe Photoshop Camera Raw 8.7 Release Candidate | support files raw digital camera - Adobe Labs

• Conversion error has no platform during the Release version

  It is a very annoying problem for the release build file generation. Here are the steps that I have while buiding:

  1. Select project > export release build

  2. Select signed native installer

  3. import a certificate

  4. click on next.

  I've always had the following error:

  

  I have the following configuration:

  OS: Windows 8.1

  System type: 64-bit

  The Flash Builder Version: 4.6 Premium

  Installed FB: FlashBuilder_4_6_LS10.exe

  Help, please. It gives me a lot of headaches for a few days now.

  I tried to install windows 7 32-bit operating system and I have more problems on the export of release builds. I wonder if Adobe has released Flash Builder 4.6 for x 64 operating systems.

• Help! I need this movieclip to follow the cursor but only in some details!

  Hello

  I'm rather new to action script and need a bit of a kick in the right direction.

  This is what I have a problem with - I used this code to the movieclip background follow the cursor:

  {onClipEvent (enterFrame)}
  x = _root._xmouse
  y = _root._ymouse
  _x +=(x-_x)/10
  FLF +=(y-_y)/10
  }

  I want however - restict movement is so it remains hidden behind the other black point with the graphic "hglf".

  I hope this makes sense and someone can help out me!

  Thank you

  You assign the instance names in the properties panel, or use the library names?

• Tight: How the image to follow the mouse only from left to right

  I'm on a tight schedule and are looking for the AS3 code how do which makes this company on their website:
  http://www.imageworksstudio.com/

  However, I don't know AS3.

  Literally my project requires I have recreate the which is shown with the hand holding the sharpie and moving only back limited to a centered rectangular area at the bottom of the screen.

  I know how to import the image that follows the mouse on the stage and make a videoclip. Let's say that I named the instance "Image_mc".

  Someone has the ActionScript for how to do this? He tie you to the object or a keyframe on a layer separate actions ?

  I appreciate any help! Thank you!

  The replacement of these two lines of code in AS3 would be:

  mouseX = box_mc.x + (box_mc.x - mouseX) / 2