Info by RMAN controlfile and V$ views

Similar Questions

• How can I remove the Windows, "Windows Picture and Fax Viewer" program from my computer

  I use another software Photo and picture Windows and Fax Viewer interferes with my work with the other program. Therefore, I would like to remove the Windows, "Windows picture and Fax Viewer" program from my computer.

  Info for WIndows XP - Windows Picture and Fax Viewer
  ------------------------------------------------------------------------
  OK... but be careful... you'll lose thumbnails of photos in Windows Explorer...
  your 'My pictures' folder... for example... does not display photos.

  And... FWIW... WP & F Viewer is not a program... it's just a .dll file. Disabling
  the .dll file is basically identical to uninstall. (in this way... If you do not
  as the result... you can reactivate).

  But if "gone forever", that's what you prefer... just delete the shimgvw.dll file.

  Attention last... your thumbnails in the Explorer will be gone.

  How... Disable WP & F Viewer

  Click Start / run and enter the following command:

  Type or copy/paste...
  regsvr32 /u shimgvw.dll
  (Yes, the space after the 2 and you is necessary)

  Press on... Come in...

  (You should see a dialog box indicating:)
  DllUnregisterServer in successful shimgvw.dll)

  How... Reactivate the WP & F Viewer

  Click Start / run and enter the following command:

  Type or copy/paste...
  regsvr32 /i shimgvw.dll
  (Yes, the space after the 2 and space after that the i is necessary)

  Press on... Come in...

  You should see a dialog box stating:
  DllRegisterServer and DllInstall in successful shimgvw.dll

  To remove shimgvw.dll go to the following folder and do a right click Delete shimgvw.dll.

  C:\WINDOWS\system32\shimgvw.dll

  If you can't find the path, you must go to...
  Button start / Control Panel / folder Options.
  See tab /... to check "Show hidden files and folders"...

• Why thousands of thumbnails are stored in my pictures in windows and fax viewer

  I can't keep up with all delete them... There are thousands of icons and photos in my email yahoo through windows fax and picture viewer. When I get an email with an attacthment, I click on it to open it- then its scanned with my virus protection, so I open it, it opens with windows fax and picture viewer. There are 2 arrows to click when you want to see the next picture, when I click on one that follows, an icon in the lower corner of the window, or pic appears a pic I've ever seen before and the icons of different websites ex: the icon of yahoo / Messenger icon / points / lines / adult photos / * ads / etc... It's very upsetting to me, because I don't know where and how they get into my yahoo mail. ??? Please help if you can... Thank you, Lisa

  I suspect the unwanted images are at your
  The temporary Internet files folder. When you access
  sites on the net that include graphics and images,
  they are loaded into this folder, so you can view them.

  If you want to view the contents of your
  The temporary Internet files folder... try the following steps...

  Reach... Start / run... Type or Copy/Paste...the following...

  %USERPROFILE%\Local Settings\Temporary Internet Files

  Press on... Come in...

  Remove all the Temporary Internet Files folder.

  More info...

  How to find your TIF (Temporary Internet Files) folder.

  Open a folder and go... Tools / Folder Options / View tab.

  ... To check "Show the hidden files and folders" / apply / OK.

  Now... you'll find your TIF file to the following location:

  C:\Documents and Settings\Votre user Name\ name
  Local Settings\Temporary Internet Files

  More information:

  (260897) how to remove the content of the
  Folder Temporary Internet Files
  http://support.Microsoft.com/?kbid=260897

  Also... to run Disk Cleanup can be worth a try:

  (310312) description of the disk cleanup
  Tool in Windows XP
  http://support.Microsoft.com/?kbid=310312

• How to remove unwanted picture and Fax Viewer images?

  There are a lot of unwanted in the Picture and Fax Viewer images, but I can't find a way to remove them.

  I suspect the unwanted images are at your
  The temporary Internet files folder. When you access
  sites on the net that include graphics and images,
  they are loaded into this folder, so you can view them.

  If you want to view the contents of your
  The temporary Internet files folder... try the following steps...

  Reach... Start / Control Panel / Internet Options /.
  General tab / historical section of navigation / settings
  button / see the files button.

  Or... a window IE and go to... Tools / Internet
  Options / General tab / navigation history section.
  Button settings / see the files button...

  You can also go to... Start / run... and type or copy.
  Paste the following command:

  %USERPROFILE%\Local Settings\Temporary Internet Files

  Then press on... Enter... to launch the Temporary Internet Files folder.

  To clear it up... try deleting temporary Internet files.

  Running Disk Cleanup should take care of it.

  (310312) description of the disk cleanup
  Tool in Windows XP
  http://support.Microsoft.com/?kbid=310312

  You may also, on an Internet Explorer window...
  Reach... Tools / Internet Options / delete files / OK.

  Do it again and check "delete all Offline Content" / OK.

  Remove the Cookies button / OK.

  More info...

  Delete temporary Internet files
  http://MVPs.org/winhelp2002/delcache.htm

• DST and vmware view = weird questions

  This is the 3rd time that when the time comes or goes we get questions of kind of weird in our very frequent floating pools, VMs stuck in starting up, wait for connection etc.

  If you look at the log below you will see that the virtual machine has been one hour before, and then she came back at the right time.

  Anyone else seen elsewhere?

  2014 03-18 T 16: 06:36.553 - 04:00 INFO (016 C-0390) < Service main Thread > [wsnm_desktop] DesktopManager queue server is installed

  2014 03-18 T 16: 06:36.585 - 04:00 INFO 016c - 082 C < logloaded > [MessageFrameWork] "ws_filesystem - component of VMware View filesystem plugin" Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.595 - 04:00 INFO (016 C-0830) < logloaded > [MessageFrameWork] Plugin 'wsnm_jmsbridge - VMware View framework JMS Bridge Controller' loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.612 - 04:00 INFO (016 C-0838) < logloaded > [MessageFrameWork] 'ws_klog - plugin VMware View Kernel Log' Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.642 - 04:00 INFO (016c-0390) < Service main Thread > [wsnm] System Service VMware View begins

  2014 03-18 T 16: 06:36.642 - 04:00 INFO (016c-0840) < logloaded > [MessageFrameWork] "ws_perfmon - VMware View Performance Monitor and counter shop" Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.643 - 04:00 INFO (016 C-0850) < logloaded > [MessageFrameWork] Plugin ' ws_vhub - Service USB virtual VMware View framework "support, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.643 - 04:00 INFO (016 C-0848) < logloaded > [MessageFrameWork] Plugin "ws_thinappmgmt - support for VMware View infrastructure Application Management" loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.644 - 04:00 INFO (016 C-0854) < PluginInitThread > [ws_vhub] vhublib: initialized, VMware View virtual USB Hub API (64-bit) version: 5.5.0 build-966253, exit: unknown

  2014 03-18 T 16: 06:36.782 - 04:00 INFO (C 088-0890) < 2192 > program [MessageFrameWork] 'wsnm_jms - VMware View framework JMS bridge' began, version = 5.2.0 build-987719, pid = 0x88C, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 03-18 T 16: 06:36.806 - 04:00 INFO (C 088-0890) < main Thread > [] classpath option:-Djava.class.path=C:\Program VMware View\Agent\lib\; C:\Program View\Agent\lib\\agentjms.jar VMware; C:\Program View\Agent\lib\\commonutils.jar VMware; C:\Program View\Agent\lib\\events-client.jar VMware; C:\Program View\Agent\lib\\events-common.jar VMware; C:\Program View\Agent\lib\\gnu-crypto-2.0.1-1.jar VMware; C:\Program View\Agent\lib\\jdom-1.0.jar VMware; C:\Program View\Agent\lib\\jms-9.2.1.jar VMware; C:\Program View\Agent\lib\\jmswrapper.jar VMware; C:\Program View\Agent\lib\\log4j-1.2.14.jar VMware; C:\Program View\Agent\lib\\messagesecurity.jar VMware; C:\Program View\Agent\lib\\orchestratorj.jar VMware; C:\Program View\Agent\lib\\securitymanager.jar VMware; C:\Program View\Agent\lib\\sessionclientapi.jar VMware; C:\Program View\Agent\lib\\swiftmq-9.2.1.jar VMware; C:\Program View\Agent\lib\\v4v-msgserver.jar VMware; C:\Program View\Agent\lib\\winauth.jar VMware; C:\Program View\Agent\lib\\ws_appender.jar VMware; C:\Program View\Agent\lib\\ws_properties.jar VMware; C:\Program View\Agent\lib\\xercesImpl-2.9.1.jar VMware;

  2014 03-18 T 16: 06:36.818 - 04:00 INFO (088 C-08E4) < logloaded > [MessageFrameWork] "ws_javaview - VMware View Java Diagnostics Framework" Plugin, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.001 - 04:00 INFO (C 088-0938) < logloaded > [MessageFrameWork] Plugin "ws_java_bridgeDLL - VMware View Java Bridge Framework" loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.002 - 04:00 INFO (C 088-0934) < logloaded > [MessageFrameWork] Plugin ' ws_java_native - Framework Java native Support of VMware View "load, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.208 - 04:00 INFO (C 088-0890) < main Thread > [ws_java_bridgeDLL] JavaBridge installed service EventLoggerService

  2014 03-18 T 16: 06:37.208 - 04:00 INFO (C 088-0890) < main Thread > [] JavaBridge queue server is installed

  2014 03-18 T 16: 06:37.209 - 04:00 INFO (C 088-0890) < main Thread > [] View Composer agent has completed the customization

  2014 03-18 T 16: 06:37.737 - 04:00 INFO (0624-0628) < 1576 > [VMwareView-RdeServer] program "VMwareView-RdeServer - VMware View RDE 32-bit Server" began, version = e.x.p build-1190491, pid = 0 x 624, buildtype = release, usethread = 0, closeafterwrite = 0

  2014 03-18 T 16: 06:39.567 - 04:00 INFO (C 088-0890) < main Thread > [] View Composer personalization state 0 (0 seconds)

  2014 03-18 T 16: 06:39.673 - 04:00 INFO (C 088-0890) < main Thread > [java] bridge exe started ok.

  2014 03-18 T 15: 38:45.288 - 04:00 INFO (016 C-0128) < main Thread > [wsnm_desktop] Session created in WAIT state: id = 1, winStation = Console

  2014 03-18 T 15: 38:45.350 - 04:00 INFO (0488-0978) < 2424 > [MessageFrameWork] 'wssm - VMware View framework Session Manager' program began, version = 5.2.0 build-987719, pid = 0 x 488, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 03-18 T 15: 38:45.397 - 04:00 INFO (0488-0550) < logloaded > [MessageFrameWork] Plugin 'wssm_desktop - VMware View framework Office Manager Instance' loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.397 - 04:00 (0488-07 D 0) INFO for < logloaded > [MessageFrameWork] Plugin 'ws_winauth - taken in charge of VMware View infrastructure Windows Authentication", version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.475 - 04:00 (0488-05 D 0) INFO for < logloaded > [MessageFrameWork] Plugin 'ws_thinappmgmt - taken in charge of VMware View infrastructure Application Management", version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488-0978) < main Thread > [wssm] Session Manager has begun for the session 1

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488 - 0 to 28) < logloaded > [MessageFrameWork] 'wssm_uimanager - VMware View Host UI Framework' Plugin support, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488 - 0 B 40) < logloaded > [MessageFrameWork] Plugin 'wssm_ui - VMware View UI framework' loaded, version = 5.2.0 build-987719, buildtype = output

  I was on the phone with VMware for 5 hours Tuesday last with this same problem.  I ended up solving the problem without their help.  You must initialize your model, let the time updated, shut it down, take a new snapshot and recompose your pool.

  Re: View 5.3 - desktop blocked at startup

• Create the new database of complete hot RMAN, atrchivelog and backup control files

  Hi all
  
  I'm trying to create the new database U1234 of P1234 of full hot RMAN, atrchivelog and control P1234 file backup.
  
  Here are my steps
  
  (1) to restore the control file
  
  #! / bin/sh
  ORACLE_SID = P1234
  export ORACLE_SID
  RMAN nocatalog target / < < EOF | Tee restorecontrol.out
  startup nomount pfile=/u01/oradba/admin/U1234/scripts/restore/restore071009U1234/initP1234.ora;
  the value of DBID 6767676;
  run
  {
  allocate channel d1 type disk;
  controfile catering to ' / u02/oradba/U1234/control/P1234_control01.ctl';
  Restore controlfile to ' / orarman/restore/P1234/cf_P1234_c-00';
  change the editing of the database;
  }
  EXPRESSIONS OF FOLKLORE
  
  (2) database stop then restart the database with the new contraol file using pfile.
  
  (3) restore data files
  
  #! / bin/sh
  ORACLE_SID = P1234
  export ORACLE_SID
  RMAN nocatalog target / < < EOF | Tee restore_dbfiles.out
  Run {}
  the value of newname for datafile 1 to ' / u05/oradba/U1234/dbfile/U1234_system01.dbf';
  the value of newname for datafile 2 to ' / u05/oradba/U1234/dbfile/U1234_undotbs01.dbf';
  the value of newname for datafile 3 to ' / u05/oradba/U1234/dbfile/U1234_sysaux01.dbf';
  the value of newname for datafile 4 to ' / u06/oradba/U1234/dbfile/U1234_users_d01.dbf';
  the value of newname for datafile 5 to ' / u06/oradba/U1234/dbfile/U1234_tools_d01.dbf';
  the value of newname for datafile 6 to ' / u08/oradba/U1234/dbfile/U1234_audt_x01.dbf';
  the value of newname for datafile 7 to ' / u07/oradba/U1234/dbfile/U1234_audt_d01.dbf';
  the value of newname for datafile 8 to ' / u07/oradba/U1234/dbfile/U1234_audt_d02.dbf';
  the value of newname for datafile 9 to ' / u08/oradba/U1234/dbfile/U1234_lh_x01.dbf';
  restore the database;
  switch datafile;
  }
  EXPRESSIONS OF FOLKLORE
  
  
  ORA-27063: number of bytes read or written is incorrect
  SVR4 error: 28: no space is available on the device
  
  Now, I missed the space during the restoration of data files and want to restore remaining who is 3 and 4 of datafile datafile.
  
  Can you please let me know how I can restore it.
  
  I need to change the names of database after the successful restoration.
  
  DBVERSION 10.2.0.1
  operating system: solaris 10
  
  Thanks in advance.

  Hello..

  Do you have free space? If Yes, then you can try: -.

  RUN {}
  SET NEWNAME for DATAFILE 3 to ' / u05/oradba/U1234/dbfile/U1234_sysaux01.dbf';
  RESTORE THE 3 DATA FILE;
  DATAFILE 3 SWITCH;
  }

  [http://www.oracle-base.com/articles/9i/DBNEWID.php]

  Anand

• Vertical wide view and Classic view layouts does not not in Version 38.1.0

  I just downloaded V38.1.0 and am unable to see my messages in any of the schemas - seen vertical wide and Classic view. Can you please help?

  Thank you.

  Alan, I followed a statement previously mailed to a different problem, but it worked - basically, you have to restart Thunderbird with Options disabled. For this - to go to help restart with the Options disabled.

  If you then want to turn all your modules, once you have restarted Thunderbird (in safe mode), you can click on Add-ons. This will bring you in the Add-ons Manager. Then click Extensions - highlight each Extension you want to activate, by first clicking the button turn off, it will switch to Enable, and then you're good to go.

  I think that the new Add on the calendar is the culprit. I hope that this approach works, thanks for posting if it is not.

  Best wishes.

• Reset Windows Picture and FAX viewer as the default value for jpeg files after loading of Corel

  I put Windows Picture and FAX Viewer by default to open jpeg, tiff and other pictures, so it appeared as an option in the drop-down list to view attachments that have been downloaded. After loading the software Corel Draw, it is now the only option to open photo files even if Windows Picture and FAX viewer is always defined as the default value. How to restore Windows Picture and FAX Viewer as a choice?

  Have you looked into the Corel software preferences to see if you can cancel these associations?

  There is usually backup keys are created in order to return to the previously used application.

• In iPhoto when I add info it closed unexpectedly and I lose the picture I was working on, no idea why?

  In iPhoto when I add info it closed unexpectedly and I lose the picture I was working on, no idea why?

  A lot of older versions of iPhoto 11 this meet right now:

  Huxly647 discovered this fix

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

• How can Windows Picture and Fax Viewer - I specify the editing program?

  I set things up so that Windows Picture and Fax Viewer is the default program when I opened a variety of types of image files, which allowed me to get a quick overview without waiting for a program to load full image editing. What I need to be able to do is to specify which program is then launched by WP & FV when I click on the bottom right of the screen edit button - one with text that says "closes this program and opens the image in edit (Ctrl + E).

  If I click with the right mouse button and select 'Open with' and then I can select in the usual list of possible programs, but what I want is to set a default value for each file type so that a left click of the button automatically opens the appropriate program. I tried the "program to choose...". "and"Always use the selected program to open this type of file"route after a right-click on the button, but what is happening is that the selected program then becomes the global default and circumvents WP & FV altogether.

  Any ideas?

  I set things up so that Windows Picture and Fax Viewer is the default program when I opened a variety of types of image files, which allowed me to get a quick overview without waiting for a program to load full image editing. What I need to be able to do is to specify which program is then launched by WP & FV when I click on the bottom right of the screen edit button - one with text that says "closes this program and opens the image in edit (Ctrl + E).

  If I click with the right mouse button and select 'Open with' and then I can select in the usual list of possible programs, but what I want is to set a default value for each file type so that a left click of the button automatically opens the appropriate program. I tried the "program to choose...". "and"Always use the selected program to open this type of file"route after a right-click on the button, but what is happening is that the selected program then becomes the global default and circumvents WP & FV altogether.

  Any ideas?

  ====================================
  See the following article:

  Change the default image editor
  application, called from Windows
  Picture and Fax Viewer
  http://WindowsXP.MVPs.org/imgeditor.htm
  (download the free utility - Imgeditor.zip)

  More information:

  How to open your choice of image editors when
  by clicking on the button Edit in the Windows image
  and Fax Viewer screen.

  Proceed with caution and at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before editing the registry)

  OK... go to... Start / run and type... "' regedit ' without
  the quotes. Then click on... OK... or press... Come in.

  In the registry... Editor drill down to:

  HKEY_CLASSES_ROOT\SystemFileAssociations\image\shell\edit\command

  In the data column, you should see:

  "% systemroot%\system32\mspaint.exe" "%1".

  (where you see * mspaint * in the example... you'll be)
  See your current default)

  Replace the key with the path to the program that will be
  being your default image editor. I tried to Picture It! 7 sort
  Here's what I changed to.

  "C:\Program Files\Microsoft Picture It! 7\pip.exe"'%1 '.

  Now, my images still open in the picture and Fax Viewer
  But if I left, click on the button Edit... Picture It! 7 opens.

  To replace the string...

  'Default' to select, left click.

  Reach... Edit / change...

  In the "Edit String" field...

  Copy / paste the path to your program choice:

  "C:\Program Files\? \???. "exe" '%1'

  Left click... Ok.

  Now, your images will always open in the picture and Fax
  Viewer, but if you left click on Edit button... your image
  editing program opens...

  Good luck.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to make "Windows Picture and Fax Viewer" the default viewer?

  "Picasa" to look at someones photos on the web, and now when dbl click on image, Picasa comes back as the image viewer.
  Is possible, with a permanent framework for XP, do "Windows Picture and Fax Viewer" the default viewer? Thanks again for your help. akmbd166 (XPpro, SP-2, 7 - IE, Office2003)

  "Picasa" to look at someones photos on the web, and now when dbl click on image, Picasa comes back as the image viewer.
  Is possible, with a permanent framework for XP, do "Windows Picture and Fax Viewer" the default viewer? Thanks again for your help. akmbd166 (XPpro, SP-2, 7 - IE, Office2003)

  =================================
  The display of images by default XP's Windows Picture and
  Fax Viewer... so all you have to do is to reset the default values:

  See the following link:

  Utility to repair image file associations
  http://WindowsXP.MVPs.org/imgassofix.htm

  more information:

  (307859) how to change or select which program
  starts when you double-click a file in Windows XP
  http://support.Microsoft.com/?kbid=307859

  Try this... open a folder of images and right-click
  your file image... from the menu, select... Open
  With / choose program.

  Make your choice from the list, or click Browse for the
  correct program if it is not in the list.

  If you want the default value... to choose... "Windows".
  Picture and Fax viewer '.

  Once you make your choice... don't forget to check
  the box that says: "always use the selected program."
  to open this type of file. (you will need to do
  for each format, jpg, .tif, .gif... etc.)

  Also... you can click with the right button on an image and choose
  Properties / change button... Choose the program
  you want to use, and then click on... OK / apply / OK.

  Also, in Windows XP, you can go to... My computer.
  Tools / Folder Options / File Types tab...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to back up my Windows Picture and Fax Viewer Photo Viewer

  Hi guys I need help I just want to know how to save my Viewer photos or images in "Windows Picture and Fax Viewer '.
  before when I opened my photo in my computer, I discovered my image using
  Windows Picture and Fax Viewer
  Like this:
  [IMG] http://i39.tinypic.com/fbjgup.jpg [line]
  but now when I double click on my picture or when I open the photos in my computer, I discovered the photo help
  Microsoft Office Picture Manager
  Like this:
  [IMG] http://i44.tinypic.com/e8jvkp.jpg [line]
  I want to see all my photos using Windows Picture and Fax Viewer
  but now when I open my image I look at my picture in Microsoft Office Picture Manager.
  I just want to know how to see my photos to Windows Picture and Fax Viewer, I want to say when I double click on my picture or when I try to open my photos in my computer that I want to see all my pictures in Windows Picture and Fax Viewer, I mean when I opened my pictures I have right click and choose open with.
  I just want to know how to save the settings in my image viewer to my computer using Windows Picture and Fax Viewer, I mean when I double click on the image or when I try to open my photos
  'Windows Picture and Fax Viewer' automatic opening see my photos.
  If anyone knows how to make guys please help me because I would like to see always all my photos in my computer using this: Windows Picture and Fax Viewer
  Thank you
  Thanks for the response guys I solve my problem now
  I followed this step by step
  [QUOTE] Find a .jpg file to open and right-click on it. Then click on "Open with", then "choose program".
  Select Windows Picture and Fax Viewer, and check the box "always use the selected program to open this type of file".
  If you have other types of image .png files or .tif that you use go through the same procedure with them. [/ QUOTE]
  and it works I have back my Windows Picture and Fax Viewer image viewer
  now, when I open all the pictures in my computer Windows Picture and the automatic Fax Viewer open to display my photos thanks. all the admin or mod please close this thread, that my problem is now solved thanks again

• Windows Picture and Fax Viewer

  The default program is WP & FV to open the pictures. Recently, he stopped the rotation function to rotate my photos. How can I solve this please?

  The default program is WP & FV to open the pictures. Recently, he stopped the rotation function to rotate my photos. How can I solve this please?

  ==========================================
  It might be worth trying to force a reinstallation of the WP & FV.

  Windows XP... to force a reinstallation of Windows Picture and Fax viewer:

  Go to start / run... and type or copy / paste the following command:

  regsvr32 /i shimgvw.dll

  (Yes, the space after the 2 and space after that the i is necessary)

  Press on... Come in...

  You should see a dialog box stating:
  DllRegisterServer and DllInstall in successful shimgvw.dll

• How to open .tif files using the Windows fax and picture viewer

  I have the file open options set to use the viewer photo and fax Windows, however, it is always opens the .tif file in a window of IE. In reading the other posts regarding this problem, I think it may be a number of MIME, but nobody published how to fix this. Can someone send please how to change the MIME type so I can open the files in the right way. I REALLY appreciate it.

  Windows XP SP3 with all updates and IE8.
  Thanks in advance,
  Eric
   
  Original title: how IE8 to open a .tif file by using the Windows fax and picture viewer?

  Hello

  I suggest that allows you to remove any CLSIDS listed under location:

  HKEY_CLASSES_ROOT Type\image/tiff
  
   

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows.

  I hope this helps.

• Windows Picture and Fax Viewer is missing on my computer

  I am trying to download pictures from my digital camera and it goes to a CD box, (as I want to put it on a cd) not normal one who rises to put images in a file. I searched 'Windows Picture and Fax Viewer' and can't find it on my computer anywhere. I don't know where he was going. Please help me get it back. I did a restore of the system when he was there, and again, it is not there.

  I am trying to download pictures from my digital camera and it goes to a CD box, (as I want to put it on a cd) not normal one who rises to put images in a file. I searched 'Windows Picture and Fax Viewer' and can't find it on my computer anywhere. I don't know where he was going. Please help me get it back. I did a restore of the system when he was there, and again, it is not there.

  =====================================
  Just to check... you must run Win XP (not Vista)
  have WP & FV...

  The following command should force a reinstall of the WP & FV...

  Reach... Start / run and type
  (or copy and paste):

  regsvr32 /i shimgvw.dll

  (Yes, the space after the 2 and the)
  After the i is necessary)

  Press on... Come in...

  You should see a dialog box stating:
  DllRegisterServer and DllInstall in successful shimgvw.dll

  John Inzer - MS - MVP - digital media experience