Information on input files

Similar Questions

• input file, not an archive valid

  Hello

  Initially, the application was written in CVI 6.0. Now, I created a new project and workspace and adds all the files.

  The build works very well. But I get when a link (build) is the error message "error: input file is not an archive valid: 'c:\Projects\...\bin\i7000.lib'". ""

  With another library, I get the same problem: "uart.lib."

  The other just lib files work fine.

  I saw in an old post a solution: just to recreate the project I did. But it did not work in my case.

  Any help?

  At soon Andreas

  Hi Andreas,

  I tried to build a simple project by calling a function of each of the libraries that you provided:

  Get_Uart_Version();
  FloatToHex (12.34);

  The project has been successfully building, there was no mistake in the linker. I tried with CVI 2013 and CVI 2013 SP2.

  You can try and see if such a simple project always gives the same error of link for you?

  If not, it is possible that the problem is not only a question of format library. You would have to try and simplify the project until you find the portion of code that triggers the error from the linker. As an alternative, you can send us your project and we can try to isolate the problem.

  Best regards
  ALPAR

• various input file formats to diadem

  Hello

  Am new to this area of DIAdem. I read that DIAdem takes input .dat, .mme, .xls and .iso.

  Can someone make me understand that, so that these different input files are used and how they differ from each other? What type of file is more efficient to use?

  Hi Rash.patel,

  They CAME to files, so if you have this file type on your hard drive, you can load it into DIAdem.  If you have a choice of file formats, NOR recommend TDM/TDX or PDM.  List you provided, the former DIAdem *.dat file format is preferable, because it's the only one in the list of stores as a block of data in binary files, which makes it much faster to read and write.

  What type of data files you load into DIAdem to analyze and report?

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Change the structure of program based on the input file

  I have a program that takes parameters of an input file and then executes a Visual acquisition, using IMAQ, controlling some other hardware at the same time.  The duration of the various stages of this process control settings.

  There is a sequence stacked structure to control the playback of the input file, the initialization of the hardware, and then a while loop on the last image to actual purchase.

  The user of the program now wish to have several games acquisition in the same race, possibly with different time settings.  This would mean different iterations of the final loop, based on the parameters of the input file.  There could be 5 games of acquisition on occasion, 3 on another, etc., in a performance of the program.

  The structure VI already seems a little baroque, and I don't want to make it even more complicated.

  I would appreciate advice on how best to proceed, because I'm really a novice of LabView.

  If you use a "State Machine" architecture, you can do exactly that.

  Instead of having a structure of stacked sequence, it is essentially a case structure in a while loop.

  Each case represents a State.

  So in your case, you would have a State for:

  -reading the input file

  -initialization of hardware

  -data acquisition

  You can have the user controls the number of iterations of the State for the acquisition of data that you want to run.

• Windows Defender who need more information about certain files?

  Hello - I just receive a windows defender popup after a game of Battlefield 2, requesting more information about 2 files that are used by punkbuster - w resident c:\windows\system32\drivers\pnkbstrk.sys in the folder system32\drivers and pnkbstrb.exe in the system32 folder.

  It seems that anti-malware apps are prone to detect falsely as a virus because of the way they work, and when I scan them with my other anti-virus/anti-malware tools they find nothing wrong - but when I checked the windows Defender directly, I noticed there are several guests in a history dating back to early November, saying "this program has undesirable behaviors."

  I wonder if it is normal to get this fast - I'm using Vista for several years now and this is the first time I ever saw him, it is a legitimate part of Windows Defender? the prompt has been along the lines of "Microsoft needs more information about this software These files can help Microsoft improve the effectiveness of Windows Defender to help protect your system. If you do not want to send a file deactivate the checkbox next to it. "Followed by w c:\windows\system32\drivers\pnkbstrk.sys, then another with pnkbstrb.exe.

  Thanks in advance.

  Hello

  All this is normal. There has been releases of versions of malware to these files if Windows Defender
  is to ensure that those of your system are legitimate.

  Games is particularly known for the possibility of introducing malware so most antivirus/antispyware/security
  programs check these viligently. Added that often a developer (game) will change something it then
  causes a part of their program to be detected as malware. It works in two ways, the detection program
  changes in its methods and/or the detected program has changed and is causing a false positive.

  ===================================================================

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• OSD-04011: GetFileInformationbyHandle() failure, unable to get information about the file

  Hi all

  I try to get my ORACLE ASM (v 11.1.0.7) software works on Windows Server 2008 Standard SP2 (32-bit), but unfortunately, I hit the next windows operating system error with no resolution in sight.

  OSD-04011: GetFileInformationbyHandle() failure, unable to get information about the file
  S/O-error: incorrect function (OS 1)

  Basically ORACLE software try to read the header information of a partition of existing online RAW drive. According to the error made ORACLE unrecognized function call. How can I make this feature available? Need help ASAP please.

  http://www.Microsoft.com/windowsserver2008/en/us/community.aspx

  They will help you in Windows Server communities at the above address.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034.

  I just bought my ASUS laptop (with no dvd player) 3 days ago. Today I turned on for the first time and was usually up to 1 hour later this bluescreen poped out: RECOVERY, your PC needs to be repaired. The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034. You will need to use the tools for restore on your installation media. If you don't have any media of the instalation (such as a disc or USB device), contact your system administrator or the PC manufacturer... As I said before that my laptop came with Windows 8, and it is not a dvd player.

  Thank you.

  Remove the power supply and remove the battery

  Press and hold the power button for 60 seconds

  Apply the AC voltage ONLY (DO NOT INSTALL THE BATTERY)

  Click on the power button and more quickly, press F9

  Follow the instructions to reset the computer to factory default

• error LNK1181: cannot open input file "... \..." \.. \build\win\objR\PMRuntime.lib'

  I have create a new Plugin.

  But happen error LNK1181: cannot open input file "... \..." \.. \build\win\objR\PMRuntime.lib'

  Why?

  I looked at the project and have it fixed with success, but unfortunately I can't send that overall because of the way the project was sent initially. Most absolute paths are the paths used in the project file and that's your project needs changes to much space when focused on a new machine. I'll give you advice on how to solve your problem and how to improve the project is configured for better portability.

  How to solve your problem.

  1. Remove $(MODEL_PLUGIN_LINKLIST) from the list and it will work well for you. The wrong way is written in the sdk file attachments that are included in your file accessories
  2. After taking the first point, you will again have a binding error, to solve, it adds ASLSupport.lib to the additional dependencies in the section of the linker.

  How to set up a project in a more portable way

  1. You should avoid using absolute in several locations paths, because when you move the project to another machine, you will need to change the paths to all these places
  2. Even using relative paths does not solve the issue properly, because in this case you must place the project from a location on each computer so that it works correctly. This is the reason why it was not $(MODEL_PLUGIN_LINKLIST) for you. The Adobe sdk samples use relative paths, so move the project so that by using their configuration fails if the relativeness of the road is not maintained
  3. In order to be totally portable, we should make use of macros and define them in one place. So that when you move the project, change the paths in this single file solves everything. An example of this is how you set the id_sdk_dir macro in your file attachments.

  Hope these points help you to solve your problem and put in place the project in a better way.

  -Manan

• How to write information to complete file including the names of columns in the ftp adapter using the Ombudsman?

  Hi all

  I have a requirement like the reading of the data from the DB table and put it in a location of ftp server using mediator.also file in the ftp location must be in .csv format.

  I am able to get the data from the file in .csv format.

  But here, my requirement is I want the data from the file with the names of columns (i.e. header information).

  Can someone help me in this problem.

  Thanks in advance,

  Divya.

  Hello

  I am able to get the information to complete file with column names.

  I added a code in the ftpadapter xsd file.

  nxsd:version = "NXSD".

  nxsd:stream = "chars".

  nxsd: encoding = "US-ASCII".

  nxsd:hasHeader = 'true '.

  nxsd:headerLines = "1".

  nxsd:headerLinesTerminatedBy = "${eol}.

  nxsd:outboundHeader = "empno, ename, sal, location, status ${eol} '"

  By adding the code above, I'm able to get the full file header information.

  Thank you

• fatal error LNK1181: cannot open input file

  Hello

  When executing plugins to sample for the Indesign CC 2015 version we get the below mentioned error

  LINK: fatal error LNK1181: cannot open input file "... \..." \.. \external\dva\third_party\boost_libraries\bin.v2\libs\boost_system\lib\win\relea se\32\boost_system.lib'

  Please help us correct this error?

  Thank you

  Suganthi.B

  Hi Suganthi.B,

  You can simply fix download the bin.v2 file from the link Dropbox - bin.v2.zip

  and paste it into the folder /external/dva/third_party/boost_libraries

• using an input file

  For most of the scripts I created, I did:

  $vmlist = "blah", "blah1", "blah2" <-hold the file located in c:\tmp\inputfile

  
  foreach ($vm to $vmlist)
  {
  Get - VM $vm | Select-Object - Property Name, NumCpu | FT - AutoSize

  I really want to use an input file instead of list that I am above. I've tinkered with it but im just don't get it.

  Thank you!!!

  Hello, drivera01-

  You can use something like Get-Content or Import-Csv to take input from a file.  Since you are just a list of names, you could make an input file that has a name of virtual machine per line, use Get-Content and then iterate over the list of names of virtual machine, such as:

  ## get the list of VM names from a text file$vmList = Get-Content C:\temp\inputFile.txtforeach ($vmName in $vmList) {Get-VM $vmName | Select-Object -Property Name,NumCpu | FT -AutoSize}
  

  Or, in this case, since Get - VM accepts an array of one or more names of virtual machine, you can just pass the list "imported" to hold the names of virtual machine once you did call Get-Content, like:

  ...## no need to use a foreach loop in this instanceGet-VM $vmList | ft -AutoSize Name,NumCPU
  

  (also cleaned the part select/ft a little).  Other ways to use an input file will result in Import-Csv if you have a bit more involved data or Import-Clixml if your input data is in XML format.

  How do I?

• How to download oracle DB using Input File face column: [PIC]

  I called EXP_Details of Table... Have columns called PIC - this collar appear as text entry .i have added input to the page file
  Now, I want to choose the file using the input file... Save it in the column
  
  Thanks in advance

  Hi Ibrahim.

  Please always mention your version of JDeveloper.

  Check out this blog for a file download example: http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-2/

  Joonas

• Help to find the flaw in a removal script of snapshot using an input file

  I would like to create a script that will make use of an input file which bears the names of virtual machine containing the shots with a common name. I used some of the logic in the script to create snapshots and I'm boning remove them now. I have attached the script to delete the input file and the creation script. The creation script works fine using the input file, but I know that my logic of the delete is wrong. Please let me know if you can see are the corrections is necessary

  You need to replace this line by the that I've shown in the code snippet.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Input file

  Hello

  I am looking for a Solution how to use "input" file

  For example to start only a special amount of VM.

  I tried with a one-liner. that works, but takes a long time for many vm ;(

  Start-vm test1, test2, test3 test4.

  theire is a possibility to generate a text including the necessary vm file when appropriate. - and use it as input. ?

  thx a lot

  Max

  You can use a text file that contains the names of all customers (one per line).

  vm1
  vm2
  

  Then, you can do any manipulation of the comments on each other like that

  Get-Content "C:\file.txt" | %{Get-VM -Name $_ | Start-VM}
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How to delete raw data into information about the file? Is it still possible?

  How to delete raw data into information about the file? Is it still possible?

  Don't know what you're saying in post #2. Sorry, just an old geezer with a considerably weakened brain here.

  Regarding the original post, select the entire image (A Command on Mac, Ctrl-A in Windows), and then A (Ctrl A) to create a new document of the same exact size, then control V to paste the Clipboard command and finally to save the file under a new name and the format of your choice.

  You now have an identical file but without any EXIF info.