various input file formats to diadem

Similar Questions

• B2B is not able to generate an input xml format file

  Hello
  
  I followed the current project approach
  
  -> I configured the document definition under EDIx12 - > 4010 - > 824-> 824def with EXEs and xsd files.
  -> channel listening file configured to the entry in the file of 824
  -> channel deliverty concocted to the JMS queue
  -> created the agreement
  
  
  When I run the present, the input file is picked up by channel succssfully listening, associted with the definition of document and found agreement and pushing the message to the queue jms successfully. However, the issue here is that I expect Bb2 must generate 824 format rather directly push data from the XML to the jms queue entry.
  
  am I missing any configuration of imp here. I have generated the 824 xsd and ecs to doc Editor.
  
  
  Kind regards
  Anjana

  Fabienne,

  -> created the agreement

  Enable the translation in the agreement and the redeployment (SAVE + VALIDATE and DEPLOY) it and then run a test again.

  Kind regards
  Anuj

• input file, not an archive valid

  Hello

  Initially, the application was written in CVI 6.0. Now, I created a new project and workspace and adds all the files.

  The build works very well. But I get when a link (build) is the error message "error: input file is not an archive valid: 'c:\Projects\...\bin\i7000.lib'". ""

  With another library, I get the same problem: "uart.lib."

  The other just lib files work fine.

  I saw in an old post a solution: just to recreate the project I did. But it did not work in my case.

  Any help?

  At soon Andreas

  Hi Andreas,

  I tried to build a simple project by calling a function of each of the libraries that you provided:

  Get_Uart_Version();
  FloatToHex (12.34);

  The project has been successfully building, there was no mistake in the linker. I tried with CVI 2013 and CVI 2013 SP2.

  You can try and see if such a simple project always gives the same error of link for you?

  If not, it is possible that the problem is not only a question of format library. You would have to try and simplify the project until you find the portion of code that triggers the error from the linker. As an alternative, you can send us your project and we can try to isolate the problem.

  Best regards
  ALPAR

• SCRIPT CURRENT FOR DIFFERENT FILE FORMATS

  Hi all

  I have a script that takes the .dat as input file. Call DataFileLoad (strDataRawPath_, "DAT", "Load")

  Now, I modified the DAT string to ALL so that it accepts any file format say .iso, .mme, etc...

  But when I try to load the .iso file, it appears a msg that particular file doesn't hit. (I installed the iso plugin)

  How can I make my script accepts multiple file formats?

  
  

• Faced with the conversion of an U8 2D array data in a Matlab file format?

  I'm trying to convert a simple 2D array of U8 (3 channels) data in a matlab file format.  I was manipulate the examples in the labview2matlabni record - but I can't read in Matlab - the matrix is not readable - said inconsistent number of columns.

  I have included my vi with a sample data as input.  I'm sure this shouldn't be so hard!

  Thanks in advance - all help is appreciated!

  If you have not already, doen

  You can check this site, http://matio-labview.sourceforge.net/. In my view, there are screws to back up or to import files dull.

  See you soon,.

  McDuff

• What file format to choose to write digital data to the file? 'Text' or 'xlsx '.

  Hello

  I have a request I want to acquire analog input data with NI USB DAQ 6352; to 50 ksamples/second sampling rate, with 8 channels of analog input NI USB DAQ 6352 and I need to display these data on a chart and at the same time I have to back up this data in a file for future recording and analysis.

  My questions are: 1. what file format would be more effective and more appropriate for this application? text or xlsx.

  2. which preferred delivery system to choose?  the category of execution.

  3. what priority should be set? normal or time critical.

  Concerning

  Jamal_IE wrote: I could not find this 'Input voltage - continuous' example in examples of LabVIEW. Could you pls see the path or just download this example VI?

  You do not have installed for your version of LabVIEW DAQmx or you do not have a good search.  It's right there for me.

  

• Change the structure of program based on the input file

  I have a program that takes parameters of an input file and then executes a Visual acquisition, using IMAQ, controlling some other hardware at the same time.  The duration of the various stages of this process control settings.

  There is a sequence stacked structure to control the playback of the input file, the initialization of the hardware, and then a while loop on the last image to actual purchase.

  The user of the program now wish to have several games acquisition in the same race, possibly with different time settings.  This would mean different iterations of the final loop, based on the parameters of the input file.  There could be 5 games of acquisition on occasion, 3 on another, etc., in a performance of the program.

  The structure VI already seems a little baroque, and I don't want to make it even more complicated.

  I would appreciate advice on how best to proceed, because I'm really a novice of LabView.

  If you use a "State Machine" architecture, you can do exactly that.

  Instead of having a structure of stacked sequence, it is essentially a case structure in a while loop.

  Each case represents a State.

  So in your case, you would have a State for:

  -reading the input file

  -initialization of hardware

  -data acquisition

  You can have the user controls the number of iterations of the State for the acquisition of data that you want to run.

• using an input file

  For most of the scripts I created, I did:

  $vmlist = "blah", "blah1", "blah2" <-hold the file located in c:\tmp\inputfile

  
  foreach ($vm to $vmlist)
  {
  Get - VM $vm | Select-Object - Property Name, NumCpu | FT - AutoSize

  I really want to use an input file instead of list that I am above. I've tinkered with it but im just don't get it.

  Thank you!!!

  Hello, drivera01-

  You can use something like Get-Content or Import-Csv to take input from a file.  Since you are just a list of names, you could make an input file that has a name of virtual machine per line, use Get-Content and then iterate over the list of names of virtual machine, such as:

  ## get the list of VM names from a text file$vmList = Get-Content C:\temp\inputFile.txtforeach ($vmName in $vmList) {Get-VM $vmName | Select-Object -Property Name,NumCpu | FT -AutoSize}
  

  Or, in this case, since Get - VM accepts an array of one or more names of virtual machine, you can just pass the list "imported" to hold the names of virtual machine once you did call Get-Content, like:

  ...## no need to use a foreach loop in this instanceGet-VM $vmList | ft -AutoSize Name,NumCPU
  

  (also cleaned the part select/ft a little).  Other ways to use an input file will result in Import-Csv if you have a bit more involved data or Import-Clixml if your input data is in XML format.

  How do I?

• Should I change file Format for CD burning

  I'm new with this please bare with me. What I can say all the music I have purchased through iTunes is in the AAC Audio file format. All the music that I imported into iTunes MY Cd collection has been imported with the Apple Lossless Audio File.

  My question is the sound quality of the BEST CD, do I have to convert the music I bought, with is in the ACC Audio, Apple Lossless file format, then burn to the CD? There should just go with the Audio of the right VAC on CD file. I ask this for music that I bought. All the other songs I imported CD into itunes is already Apple Lossless. I am not concerned about the larger files, just to get the best sound quality for CD.

  Hi 80vette,

  Thank you for using communities Support from Apple!

  I see you are eager to learn more about the quality of the music, and if you can do something else to get them to a better quality.  Now it is possible to convert your AAC to Apple Lossless files, the only change you will see is a significant increase of disk space being absorbed by these songs.  Simply put, you can put the lossless format, but you will hear no audio enhancement.  In addition, encoded AAC files downloaded from the iTunes Store already compete with the quality that you hear on a CD of music retail:

  AAC encoded files compete with the quality of the audio CD and sound as good or better than MP3 files encoded in same or even a high sampling rate. For example, a 128 kbps AAC file should sound as good or better than a 160 Kbps MP3 file. Because the flow is weaker, the AAC file is also smaller than the MP3 file.

  12 iTunes for Windows: AAC

  See you soon.

• When opening .doc website link, FF adds .docx file extention &amp; does not open in Word 2010, with incorrect file format error. Pls Help

  I use Firefox v12 to open a hyperlink to a Web site that points to a door MS Word Document to download.

  Then, we are asked to open the file with MS Word (default), which is our installed version of MS Word 2010.

  Firefox then renames the file by adding a .docx file name for example filename.doc.docx. MS Word 2010 opens with the error "invalid file format", which is correct that Firefox has renamed.

  Is there a fix or a workaround for this?

  You can try to delete the mimeTypes.rdf file in the Firefox profile folder to reset all the actions file.

  • http://KB.mozillazine.org/mimetypes.RDF
  • http://KB.mozillazine.org/File_types_and_download_actions#Resetting_download_actions

• File formats

  Can someone tell me if the 3D data captured via the germs can be exported as wrl, obj, or stl file? If this isn't the case, Sprout files can be imported into 3D Studio Max, manipulated and then exported to print via a 3D printer?

  Thank you

  Hi there @QuasiMaximus
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for more information on the file formats used by capture 3D on the germ.  I'm happy to help you with this.

  I found this post on the forum where State developers who take in charge for obj, is coming, but not yet included from January 2015.

  3D scanning of objects in 3D - it's files work? -sprout.hp.com

  The same post indicates that the scans themselves are stored in the following location:

  {USER_FOLDER} \AppData\Local\Hewlett-Packard\Sprout\Workspace\AssetRepository\3dCaptures

  However, I also found this video on youtube that shows you how to find the hidden obj files generated by the germ.

  How to access the format file OBJ on the Hp germ - youtube.com

  I hope this is a help to you. If that answered your question, please mark this message as a solution.

• RAW file format

  No chance, F65/55/5 raw file format is available?

  See you soon.

  You ask for someone to post a clip of RAW file original download?

• Excel does not recognize this file format

  I've been using excel (Office: mac 2011) for some time. All of a sudden excel opens. I'm getting different error messages such as: "Excel does not recognize this file format" and "There is a problem with the database of the Office". I use OS X EL Capitan 10.11.3 version with my iMac. I tried to uninstall Office: mac & reinstall it with the disk. He re - installs OK but won't open without error message... The rest of the Apps, for example. "Word, Powerpoint open OK. The problem is only with excel. Someone had a similar problem?

  Since your problem is with Excel, you might get a better answer here http://answers.microsoft.com/en-us?auth=1

• *. SEQ file format has any difference when it is deployed

  A *.seq File Format has any difference when the system is deployed on a tester with the deployment only license?

  I guess that the File Format affects only when you run the sequences in TestStand Development. But I may be wrong, that's why I ask.

  Thank you

  Reference of best practices:

  File format
  File format can affect the speed and performance. Before TestStand 4.0, all sequences have been saved to the INI format.
  TestStand 4.0 and later versions lets you record movies in three formats: INI, XML and binary. Binary format
  offer the faster load and save time and also generates smaller files. You can specify which format to use for new
  dialog box sequence files by clicking on the Options of Format of file button in tab Preferences of Options of Station. TO
  change the format of an existing sequence file, choose the editing command' file of sequence properties and select File Format on the
  General tab.

  The format will not change when it is deployed.  You see it change?  You can test it by opening in a text editor in both cases and see if they look.

  Kind regards

• The binary file format

  With the help of LV2010.  I have a program that stores data in a binary file.  The file is a set of strings and floating point values.  I need to write another program in VB.NET that can save/read these files, so I need information on the actual file format of the data.  Is there a documentation which describes how the file is saved?  Thank you.

  Interesting. Usually, this question gets asked in the opposite direction with people trying to decode in a cluster.

  If you use the WriteToBinary function, your data are written as native data types in order to cluster in the binary file. Because you use a cluster, each string is being preceded by a length, which I believe is an I32.

  This is described in the help file for writing to a binary file. I think the people of thing travel length of string/array much however.