Information update system file problem
Hello worldI just installed a developer version of CF8 in my local machine. And I also decided to install "kb403622 - ColdFusion 8.0.1: cumulative hotfix 1" fix. Then I went to the system information section, click the Browse button the server next to the update file text box and I got an error message saying "error IO error on server communications server '.
Can someone help me with this error?
Thanks in advance.
CF_N_Montreal wrote:
> Can someone help me with this error?
>
> Thanks in advance.
>
That oh-so-useful, the error indicates that you have not enabled on RDS
This server. Unfortunately, RDS is required for all travel it file
controls in the ColdFusion administrator, but it is highly * NOT *.
recommended to have RDS enabled on production servers.
Your two choices is so enable RDS and use the Browse.
OR
To manually enter the full path name in, but who have a safer public server.
Tags: ColdFusion
Similar Questions
-
My computer has a Seagate hard drive 500 GB internal SATA that has the operating system on it and also a secondary internal Seagate IDE HDD 80 GB that I was drag files on a backup. I tried to format this drive of 80 GB to get a fresh start and use Windows backup to back up my files. Windows 7 will not format the drive, and he does not see the drive as a location of backup because apparently the clean installation of the Windows operating system, updated system files on the secondary drive. Disk management reports the operating system drive (500 GB one) as "disk 1-Boot, Page File, crash dump, primary Partition. It reports the secondary drive (the 80 GB one I would use with Windows Backup) as "disk 0-system, active, primary Partition". I would very probably disconnect the secondary drive and do other clean install of Windows 7, so he places all the files on the hard drive and do not involve the secondary drive, so I can format the secondary drive and use backup Windows? Or y at - it another way to fix this without doing a clean install? Thanks for any help!
To create a new, full backup
After you create your first backup, Windows backup will add new information or changed to your subsequent backups. If you save your backups on a hard drive or network, Windows backup will create a new backup, full for you automatically if necessary. If you save your backups on CDs or DVDs and could not find an existing backup disk, or if you want to create a new backup of all the files on your computer, you can create a full backup. Here's how to create a full backup:
Open backup and restore by clicking on the button start
, clicking Control Panel, clicking system and Maintenance and then click Backup and restore.In the left pane, click on create new, full backup.
NoteYou will see this option if your backup is saved on CD or DVD.
-
Can Hello anyone help?
After you configure Subversion in Dreamweaver, I get this error again!
SVN: 155021 #. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information about this issue, see http://www.adobe.com/go/dw_svn_en.
even after following the instructions http://www.Adobe.com/go/dw_svn_en Download the extension, python change the var in windows to say «;» C:\Python26'
with & without quotes, with or without; before C
command > comparability of Subversion to get the following error "the Conversion process has failed. Please make sure you have Python installed and you check Python PATH parameter'
I managed to get all the files after the installation, I locked, unlocked and commit a file to test fact so that was all works well, the only part I'm not retrieves the latest version, this is because Subversion is 1.6.2 and dreamweaver must revert to the version 1.4.5 on local to work, the compile someone at - it an idea what to try next in order to make it work?
Just a reminder!
- I configure Subversion through guidelines on http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS80FE60AC-15F8-45a2-842E-52D29F540FED. html
- I managed to get the latest SVN version
- Lock, unlock and commit a file
- Installed Python in C:\Python26 change the path in windows system properties > advanced > Environment Variables > system variables > New > Python =; C:\Python26 also C:\Python26
- I also tried the same thing in the User Variables
- Installed the extension DW Subversion compatibility
Tried to run the compatibly with the command > Subversion comparability in DW
Welcome any suggestion to solve this?
Hello
There has been a lot of problems using svn with dw, and I know many people who have stopped trying to operate correctly.
As much as I know dw will not work with newer versions of svn (over 1.5), and even then, there are a lot of problems, a possible solution is to try subweaver (at- http://code.google.com/p/subweaver/ ), as this has solved some of the problems associated with the use of tsvn dw environment.
PZ
-
wic_x86_enu.exe
When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.
I had already run the windown update, the problem remains.
Please help.
Thank you.
Hi YongWaiMan,
You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & see if you can download and run wic_x86_enu.exe.
For more information, you can consult the following link.
Hope this information is useful.
-
The error code is 800b0100 when he tried to update. Updates were the .net framework 3.5 SP1 and the upgrade to SP2. I ran the System File Checker, and the result is corrupted system files, but could not be repaired. The content of the log files is as below:
=================================
Preparation of control system was updated.
Binary version 6.0.6002.22202
Package Version 6.0
2009-11-19 00:47Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mumControl components store
Summary:
Seconds executed: 3579
Found 3 errors
CBS MUM lack count: 3Unavailable repair files:
servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.cat
servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.cat
servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.catand the second log file is:
=================================
Preparation of control system was updated.
Binary version 6.0.6002.22202
Package Version 6.0
2009-10-05 14:49Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mumControl components store
Summary:
Seconds executed: 1509
Found 3 errors
CBS MUM lack count: 3Unavailable repair files:
servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.cat
servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.cat
servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.cat=================================
Preparation of control system was updated.
Binary version 6.0.6002.22202
Package Version 6.0
2009-11-18 23:53Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mumControl components store
Summary:
Seconds executed: 1237
Found 3 errors
CBS MUM lack count: 3Unavailable repair files:
servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.cat
servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.cat
servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.cat=================================
Preparation of control system was updated.
Binary version 6.0.6002.22202
Package Version 6.0
2009-11-19 00:47Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mumControl components store
Summary:
Seconds executed: 3579
Found 3 errors
CBS MUM lack count: 3Unavailable repair files:
servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum
servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.cat
servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.cat
servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.catFree unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows 8 KB3000850 update fails to update due to the corruption of system files in MSDTC.log
Greetings,
I seem to have a serious problem with corruption of system files. And before anyone suggests, I ran the SFC and MARIKEL, can repair corruption. Corruption occurs in the MSDTC.log file and causes the update to KB3000850 to not settle. I know that it is the source of the problem, because I checked in the CBS. I'll copy and paste the appropriate section below.
2014-12-06 20:58:07, error CSI 00000f3a (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646929 # to Windows::Rtl:SystemImplementation:DirectFileSystemProvider:SysCreateFile(flags_=_0,_handle_=_{provider=,_handle=0,_name=_("null")}, da = (SYNCHRONIZE |)) FILE_WRITE_ATTRIBUTES), oa = @0x5999ddd310--> OBJECT_ATTRIBUTES {s:48; rd:; on: [9] "MSDTC.} JOURNAL "; a: (OBJ_CASE_INSENSITIVE)}, iosb = @0x5999ddd3b8, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), his = (FILE_SHARE_READ |) FILE_SHARE_WRITE. FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE |) FILE_SYNCHRONOUS_IO_NONALERT | (0 x 00004000), eab = NULL, eal = 0, disp = invalid)
[gle = 0xd000003b]
2014-12-06 20:58:07, error CSI 00000f3b@2014/12/6:11:58:07.232 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): native STATUS_OBJECT_PATH_SYNTAX_BAD error of the function expression Windows::Rtl:SystemImplementation:DirectFileSystemProvider:SysCreateFile: (null)
[gle = 0 x 80004005]
2014-12-06 20:58:07, added CBS C:\WINDOWS\Logs\CBS\CBS.log WER report info.
2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141202063835.cab info.
2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201150922.cab info.
2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201103812.cab info.
2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201075150.cab info.
2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201073551.cab info.
2014-12-06 20:58:07, info CBS unable to add pending.xml to Windows error reporting. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
2014-12-06 20:58:07, info CBS unable to add pending.xml.bad to Windows error reporting. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
2014-12-06 20:58:07 info CBS not able to add SCM. EVM to Windows error reporting. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
2014-12-06 20:58:07, error CSI 00000f3c (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646928 # to Windows::Rtl:SystemImplementation:CSystemIsolationLayer_IRtlSystemIsolationLayerTearoff:TransferFile(flags_=_(ReplaceIfExists|)) OpenForBackupIntent), op = 'HardLink' [8], o = NULL, oname = [l:18 {9}] "MSDTC. The JOURNAL", ndir = @0x59b6067e78, name = [l:18 {9}]"MSDTC. The JOURNAL", disp = (null))
[gle = 0xd000003b]
2014-12-06 20:58:07, error CSI 00000f3d (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646819 # to CFileInstaller::DoComponentOperation (...) [gle = 0xd000003b]
2014-12-06 20:58:07, error CSI 00000f3e (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646818 # to CFileInstaller::ProcessComponentChange (...) [gle = 0xd000003b]
2014-12-06 20:58:07, error CSI 00000f3f (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646817 # PrimitiveInstaller::CCoordinator:ProcessChange(Change_6.3.9600.16384->_6.3.9600.17415_for_Microsoft-Windows-COM-DTC-Runtime,_pA_=_PROCESSOR_ARCHITECTURE_AMD64_(9), culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral) [gle = 0xd000003b]
2014-12-06 20:58:07, CSI Info 000009 c 7 SMI primitive installer [completed]2014-12-06 20:58:07, error CSI 00000f40 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510400 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd000003b]
2014-12-06 20:58:07, error CSI 00000f41 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510399 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd000003b]
2014-12-06 20:58:07, error CSI 00000f42 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510398 # to CCSDirectTransaction::GenerateComponentChangeList (...) [gle = 0xd000003b]
2014-12-06 20:58:07, error CSI 00000f43 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510397 # to Windows::COM:CPendingTransaction:ExtractInformationFromRtlTransaction (...) [gle = 0xd000003b]
2014-12-06 20:58:07, error CSI 00000f44 (F) HRESULT_FROM_WIN32 (161) #4340661 # to Windows::COM:CPendingTransaction:IStorePendingTransaction_Analyze (...) [gle = 0x800700a1]
2014-12-06 20:58:07, error CSI 00000f45 (F) HRESULT_FROM_WIN32 (161) #4016881 # Windows::ServicingAPI:CCSITransaction:ICSITransaction_Commit(Flags_=_47_(0x0000002f), pSink = NULL, disp = 0, coldpatching = FALSE) [gle = 0x800700a1]
2014-12-06 20:58:07, error CSI 00000f46 (F) HRESULT_FROM_WIN32 (161) # 81441498 #4016880 by Windows::ServicingAPI:CCSITransaction_ICSITransaction:Commit(flags_=_0x0000002f,_pSink_=_NULL,_disp_=_0)
[gle = 0x800700a1]
2014-12-06 20:58:07, info CBS setting ExecuteState key: ExecuteStateNone
2014-12-06 20:58:07, Pavilion Info CBS RollbackFailed setting to 0
2014-12-06 20:58:07, info CBS Clearing HangDetect value
2014-12-06 20:58:07, info CBS saved last overall progress. Current: 0, limit: 1, ExecuteState: ExecuteStateNone
2014-12-06 20:58:07, info CBS configured poqexec of hanging from the SetupExecute.
2014-12-06 20:58:07, info CBS Exec: restore operations because of a CSI pilot commit failure.
2014-12-06 20:58:07, error CBS Exec: impossible transaction CSI hangs because transactions cannot be merged: 0 [HRESULT = 0x800700a1 - ERROR_BAD_PATHNAME]
2014-12-06 20:58:07, CBS Perf info: all InstallUninstallChain.
2014-12-06 20:58:07, Info CSI CSI Transaction 00000f47@2014/12/6:11:58:07.701 @ destroyed 0x59a2b9ab40
2014-12-06 20:58:07, info CBS cannot run the chain of execution. [HRESULT = 0X800700A1 - ERROR_BAD_PATHNAME]
2014-12-06 20:58:07, error CBS could not process the single-phase execution. [HRESULT = 0X800700A1 - ERROR_BAD_PATHNAME]In addition, my OneDrive has problems with commissioning. Stuck it doing. No idea if they are related. I tried to do a system restore to a restore point that several days ago, and he almost killed my computer. Somehow he damaged a file critical and would not start Windows, update the system would not work because it claims that the drive has been locked, he tried claiming my recovery media was not valid (it was originally windows 8 CD I used to install from), and finally I was able to get Windows to recover using the tool to restart system available on the CD. After reinstallation of updates, problems persisted. I don't know how to deal with this type of file corruption. Could someone please help.
If you nead the SFCdetails, I can post them.
I got exactly the same problem with the MSDTC.log. I finally just gave up any attempt to install the update. The tendency to blame the problems with this update on Avast (that I have not installed) have obscured the fact that there is something in this update that wreaks havoc on many computers Windows 8.1.
-
There is a problem with your license so notifications will no longer appearYou will no longer receive communications, including those concerning your license or activation.To try and fix this problem click on one of the links below.Error: 0xC004D401Description:The security processor reported a system file mismatch error.
Vista Service Pack 2 (SP2) is installed?
==========================
1. Download this diagnostic tool, save it to your desktop, then right click on the saved file and select run as administrator to run the utility: http://go.microsoft.com/fwlink/?linkid=56062
2. once the race completed, click the continue button, and then click the copy button (on the Clipboard).
Note: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.
3. start your own, new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:
http://social.Microsoft.com/forums/en-us/genuinevista/threads
4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.
-
I am trying to use the PSR as a domain user, but get the following error message when you try to save my record:
"You don't have permissions of system files needed to create the specified output file.If I run the present when logged in as a domain administrator, I can record without problem. But when logged in as a domain user, I get the error. I tried "Run as Administrator" as well as "Run as different user", enter the domain administrator credentials, but still get the error.Everyone knows about this problem?Hello Giblits,
Because the computer is connected to a domain, it would be better on the TechNet forum. I suggest you post your question on the following link to get the exact resolution.
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
-
Don't ovewrite system files Firefox critical Windows OS?
I work in a school district. We use software to information student Tyler. I have Firefox and IE 10 on our computers. Tyler works but sometimes it does not update the alignments of the student. We were using IE then found that Firefox worked better. We still have random problems with Tyler. Our superiors contacted Tyler and they told us that it is not their problem, but a problem of Firefox. They said Firefox crushes the critical system files and we have now for reimage all our computers. Is it true that Firefox can overwrite some system files is critical?
Thanks for the update; I hope that other users of Tyler will find it in the search the Web and benefit from your research.
-
How to install this update and resolve problems of USB and the touchpad?
I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.
The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.
This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
Driver revision history:
Twinhan VP704A Driver Release Notes
-------------------------------------------------------------------------------
Note:
1. in the event that the system hangs when running with VP704A, please install ULI
Host USB 2.0 in \ULiUSB20Driver driver2. for XP/SP1, please update with the patch in
3. in XP/SP1, update driver will crash the system, while the new facility is ok.
The trick to update driver XP/SP1 is illustrated in the following steps,
a. uninstall the driver
b. disconnect and reconnect the USB device
c. install the driver
4 to support the controller remotely, please launch Agent.exe in \Agent.
Further details at \Agent\Readme.txtKnown issues:
1 multi-instance is not supported
2 remote wakeup is not supported
3. strong use of the processor from analog video/audio capture
4. bad Signal using color YUY2 format IST
5 AV sync if audio captured the wrong filter.
(Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
6. noise with analog TV and FM Radio
(Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)Driver revision history:
-------------------------------------------------------------------------------
2005-10-24, version: 1.0.2.8
Bugs fixed and new features:
1 is not correctly configured.
-------------------------------------------------------------------------------
2005-10-21, version: 1.0.2.7
Bugs fixed and new features:
1. the firmware version read FLASH OK!
-------------------------------------------------------------------------------
2005-10-14, version: 1.0.2.6
Bugs fixed and new features:
1.MUtil - access driver empty part lower part of screen when IST!
2.MUtil - access HCT pilot check fix crash!
-------------------------------------------------------------------------------
2005-10-07, version: 1.0.2.5
Bugs fixed and new features:
1 tuner turns off when S-Video, Composite.
-------------------------------------------------------------------------------
30/09/2005, version: 1.0.2.4
Bugs fixed and new features:
1.agent.exe update for repeat bug!
2.TI5150 sign up to fix video Format!
-------------------------------------------------------------------------------
2005-09-29, version: 1.0.2.3
Bugs fixed and new features:
1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
2 reset TI5150 when a new frequency is defined
-------------------------------------------------------------------------------
2005-09-27, version: 1.0.2.2
Bugs fixed and new features:
1. difficulty I2C unstable access on some devices.
-------------------------------------------------------------------------------
2005-09-23, version: 1.0.2.1
Bugs fixed and new features:
1. analog TV becomes sometimes darker.
-------------------------------------------------------------------------------
15/09/2005, version: 1.0.2.0
Bugs fixed and new features:
1. difficulty of installation INF for Windows 2000.
2 FM scan radio policy changed!
-------------------------------------------------------------------------------
13/09/2005, version: 1.0.1.9
Bugs fixed and new features:
1 USB string serial number not visible with USBView, updated firmware required.
2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
-------------------------------------------------------------------------------
13/09/2005, version: 1.0.1.8
Bugs fixed and new features:
1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
-------------------------------------------------------------------------------
12/09/2005, version: 1.0.1.7
Bugs fixed and new features:
1. improve the performance of check channel lock status
2 pinnacle INF Fix.
-------------------------------------------------------------------------------
2005-09-09, version: 1.0.1.6
Bugs fixed and new features:
1. Add an audio initialization function.
-------------------------------------------------------------------------------
2005-08-31, version: 1.0.1.5
Bugs fixed and new features:
1 separation of PAL and NTSC resolution mode.
-------------------------------------------------------------------------------
2005-08-30, version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2 frame drop.
3 pinnacle inf file HCT chkinf fail.
-------------------------------------------------------------------------------
2005-08-22, version: version 1.0.1.3
Bugs fixed and new features:
1. add remote control interface in digital source filter.
2.A new remote test tool that contains of the source code in \Test_RC.
-------------------------------------------------------------------------------
2005-08-16, version: 1.0.1.2
Bugs fixed and new features:
1. Pinnacel & Twinhan driver & file reorg.
2.VP704A_BDA_Test tool, add a test to the system code.
3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
4 firmware update
-------------------------------------------------------------------------------
2005-08-15, version: 1.0.1.1
Bugs fixed and new features:
1 serial number feature is lost when the audio volume of the TV control
2.RC6A support CIR
(This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
EEPROM must be flashed with \Firmware\M9207.bin)
3 Serieal, MAC address and name of device OEM taken in charge.
Please see for more details on the \Firmware\readme.txt.
4 Ioclt example source code included.
-------------------------------------------------------------------------------
08/08/2005, version: 1.0.0.10
Bugs fixed and new features:
1. increase audio volume analog TV.
-------------------------------------------------------------------------------
04/08/2005, version: 1.0.0.9
Bugs fixed and new features:
1. analog TV Video mode failed.
-------------------------------------------------------------------------------
2005-08-03, version: 1.0.0.8
Bugs fixed and new features:
1.off - centerf frequency scan + / 125Khz
2 difficulty program a copy scanned in MCE.
-------------------------------------------------------------------------------
02/08/2005, version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
-------------------------------------------------------------------------------
2005-07-28, version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
2. improve the stability of I2C communication.
3 unify signaling resistance & quality as a THBda ioctl interface.
4 capture filter lock state control.
-------------------------------------------------------------------------------
2005-07-28, version: 1.0.0.5
Bugs fixed and new features:
1. the same strength & quality signals as VP7046.
2 debug build pilot
-------------------------------------------------------------------------------
2005-07-21, version: 1.0.0.4
Bugs fixed and new features:
1. put the INF update.
-------------------------------------------------------------------------------
2005-07-20, version: 1.0.0.3
Bugs fixed and new features:
1 improve performance in PCM4
2 passage of the analog TV Mode to FM Mode failure
-------------------------------------------------------------------------------
2005-07-04, version: 1.0.0.2
Bugs fixed and new features:
1. production tool FM test OK!
--------------------------------------------And here is the Readme file from the other file in the update?
************************************************** ************************************************
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
************************************************** ************************************************----------------
INTRODUCTION
----------------This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
and Windows XP.-------------------------
CONTENTS OF THIS DOCUMENT
-------------------------1. installation instructions
2. uninstall instructions----------------------------
1. installation instructions
----------------------------(Windows 98SE & Windows ME)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver files in your Windows system, and then restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver files to your Windows system, then turn off your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.(Windows 2000)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will install and load the driver and you do not have to restart the
computer.
B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver in your Windows system files, before turning itself off
your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller"and install the driver.(Windows XP)
ULi USB 2.0 Controller has strapped on the system
1. install the driver USB 2.0 ULi
-Run the Setup program.
-Click "NEXT".
-This program will install and load the driver and you do not have to restart the
computer.
-Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
Hub. " Please select "Install the software automatically (recommended)" and then
Click 'Next' to continue the installation.
-This program will install and load the driver and you do not have to restart the
computer.
B.If any ULi USB 2.0 on the system controller
1. install the driver USB 2.0 ULi
-Run the Setup program.
-This program will copy the driver in your Windows system files, before turning itself off
your computer.
-Fix the ULi USB 2.0 computer controller card and restart your computer.
2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
Host Controller', proceed with the installation.
-Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
Hub. " Please select "Install the software automatically (recommended)" and then
Click 'Next' to continue the installation.Notice:
If you can not configure driver successfully. Please restart your system, then follow
steps to reinstall driver above.------------------------------
2. uninstall instructions
------------------------------1. open the "Control Panel" folder.
2 call the "Add/Remove Programs" icon
3 choose the "ULi USB2.0 Driver" section.
4. click on the "add/delete" button to remove drivers.-----------------------------------
Change list:
-----------------------------------
1.74
1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
2. support all USB2.0 Host Controller.
1.73
1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
4 solve problem as wirless lan will disconect when the plug in usb device.1.72
1 fix that system crash when HD USB copy large files.1.71
1. improve the management of power in Win98 / Me.1.70
1. improve the devcie detection function.1.62
1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.1.61
1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.1.60
1. in support of functions power management when a HUB with the USB plug in device
a root HUB.1.57
1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
2. fix audio problem that can not display smooth when peripheral USB connect to the system.
3. fix system cannot detect DVICE USB when the USB device attached to the system in
suspend mode.
4 fix when root USB HUB have a full load, USB HD sometimes
failure of the transaction.1.56
1 fix that device of DVD decoder cannot display correctly.1.55
1. fix OTI USB 2.0 drive hand cannot detect question.
2. attach the USB mouse cannot be used after the resumption of hanging.1.54
1. to improve the safety of the driver.1.53
1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device1.52
1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
automatically fix file system errors
2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is pluggedv.1.51
1. to improve the compatibility of USB 2.0 card reader.
2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.v1.50
1. improve the transfer blockv1.48
1. difficulty of installation of the USB 2.0 LAN driver hangs up
2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
3. fix some laptops starting hanging Win98SEv1.47
1. improve the performance of bulk transfer.
2. fix the failure of USB 2.0 Preview in bulk webcam.v1.46
1. support USB 2.0 and 1.1 devices isochronous
2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
4. improve the capacity of the device detection in Win9X / MEv1.45
1. fix system hang up when the mode standby ACPI.
2. attach the mouse sometimes does not disappear when it is unplugged.
3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XPv1.44
1. composite crutch
2 improve the detection of devicesv1.43
1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
2 difficulty at high peripheral speed detected as full-speed device
3. fix some problem of failure detection USB mouses
4. fix some problem USB 2.0 Hub failure detection
5 difficulty Win98SE crashing if ULi EHCI 1.42 is installedv1.42
1. fix PC Card eject hang up in Win98 / ME
2 difficulty of interruption/resumption hang up in Win98
3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
4. fix some failure detection of PC Card USB 1.1 devicesv1.41
1. Add new feature that system can install the driver ahead of the device is plugged in.
2. fix PCMCIA OHCI controller resources affect problem on Windos ME.v1.40
1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.v1.32
1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
If the path of the OS is not c:\windows.
2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.v1.31
1. Fix problem that driver cannot install on Windows 2000.v1.30
1 fix than Win9X / shows ME no USB 2.0 hub.
2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
3 Fix problem that sometimes when you click on "search the hardware changes.
for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
file is not found.
4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
verison of ULi EHCI controllers devices are connected and disconnected.
5 install the driver support for several features of controller EHCI ULi existing on
system at the same time.
6. determine Win2K/XP shows hub USB root for USB 2.0 hub.v1.20
1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.ULi Coporation. (ULi) web sites:
http://www.Uli.com.tw/ (Taiwan)CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.
I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.
It is said above 2 relevant and 1 right ANSWER available...
I'm new here, so anyone could direct me to these answers?
-
Remove earlier / released old system files and Microsoft applications to wipe hard drive.
This weekend I had a BSOD problem. Fortunately I was able to recover the system due to the construction, it supports routines in XP. Now I try however to condition my system to minimize a reoccurrence by cleaning the system of updating drivers, to eliminate the unnecessary s/w and wipe my hard drive. Is safe for me to remove earlier versions of the update of the s/w Microsoft for office, MSXML 4.0 Service Pack 2, Windows Internet Explorer 8.0 s/w updates, updates to Windows XP, Microsoft. NET Framework 2.0 SP2 and updated security system? I could recover valuable space on my hard drive. Thank you.
PS. is it possible to transfer all the information it is to say, s/w, docs, files, etc. of a hard drive on a bigger hard drive?
I'll answer the part about the updates Windows and framework-
Remove the old Windows updates: -.
Folders that have uninstall as part of the name (for example $NtUninstallKB282010$ who reside in C:\windows (hidden files) are window Hot difficulty updating folders/files) can be removed safely (providing ever, you wish to uninstall the updates). I recommend you leave these records for a period of at least one month to make sure that the update works correctly.
These updates can be removed individually or together. To learn more about the update/s go on:
http://support.Microsoft.com/kb/xxxxxx
NB: XXXXXX = the actual number, not to mention the "Q" or "Ko."Once you have removed the uninstall folders/files, then go to control panel, add/remove programs. Select the title of the corresponding Windows fix on the folder/file of the patch you just deleted, and select Delete. You will get a Windows error. This is because you deleted the uninstall folder/files. Simply choose OK and the entry will be removed from the Add/Remove Programs list.
Don't NOT delete the folder $ $hf_mig
Cleaning after installation of SP2
http://aumha.org/win5/a/sp2faq.php#afterand/or
XP SP3: Post Installation Cleanup
http://aumha.NET/viewtopic.php?f=62&t=33827Please note this is only for Windows XP and is not on Vista or Windows 7
FRAME: -.
Aaron Stebner's blog: Mailbag: need should I even older versions of the .NET Framework on my system after installation of .NET Framework 3.5 SP1? :
http://blogs.msdn.com/astebner/archive/2009/04/20/9557946.aspxI would like to leave these files only "Office MSXML 4.0 SP2, updates of Windows Internet Explorer 8.0 s/w".
TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.
-
What dose does that say when you get a blue screen and when I update some files made s error
How can I do to get rid of the problem.
the blue screen is also known as the 'blue screen of death '. However, it is actually a message that provides information about the crash of windows.
There are several reasons why the computer would crash and the analysis of the error code on the scree blue of death and the internal error logs may provide a clue as to why the system hangs.
Although we do not have your error codes, it could be rationalized that in your particular case, the accident may be associated with the update files.
Thus, one of the possibilities of the accident is that something is wrong with your file system and update of the files on the disk is not possible.
Maybe your anti viral is badly configured and prevents the updates to your system. Maybe your system is infected and corrupted files / infected are prevented from being updated with the authentic system files. Perhaps the master file table is not indexed and so update of the files is not possible.
all these are only indicative, but you can probably see where you are going with this.
DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >
-
After an update my file, editing, printing etc. lines disappear the
I had File, Edit, etc. on a single line and near the right part of the House, printing etc., but they disappeared after a three Windows Update message, how to do that I get them because I have tried everything I know on this computer, but am not very good
Hello
1. what update has the problem from occurring?
Updated version has a problem in the history of the update.a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.(b) in the left pane, click view update history.c. to display more information about an update, double-click it.Do System Restore to the point that your computer worked very well and install updates manually ensuring that do not install the problem causing the update unless it says 'important update '. -
Startup Repair is checking your system for problems... and for the last ten hours!
Apparently, during Windows updates last night, my laptop itself cut because it became overheated. When I tried to turn it on this morning, it would not load my login screen, giving instead a screen empty and dark. Now, he goes through the Startup Repair tool, where it says repairs to try with a blue bar moving, below which it says repair disk errors, it can take more than an hour to complete. The problem is that he has done this for more than ten hours now with no sign of whether or not it works. The screen shows exactly:
Startup Repair is checknig your system for problems... If problems are found, Startup Repair will fix automatically. Your computer may restart several times during this process. No changes will happen to your personal files or information. This may take several minutes. Attempt to repair... Repair the disk errors. It may take more than an hour to complete.
Help, please! My laptop is only a year old and I backed up my files not recently (there are several important to me). If he finishes by turn on normally? What is happening with it?
Hi Ali,Do you remember the update (S) that caused the problem to occur?Remove all external devices (i, e printer, USB devices) and check.In the meantime, follow these steps and see if it resolves the problem.Step 1:If you have the Vista installation disc, I would suggest you start in the system recovery options and do a System Restore to the point that your computer was working normally.Step 2:Once your system is restored, manually install the Windows updates to determine which update caused the problem to occur.
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Hi all
Update November 2015 sends my HP 640-1100 PC Windows 7 HP Touch, SP1 in some loop after reboot, it gets to the point where a password box enter would appear I see screen seems way outside this missing element, but something clearly does not load properly as he disappears then reappears with circle continues to try to load something which resulted in a flashing screen and continuous running permanent.
Gets system recovery come to me before update and I tried twice and flaw is certainly in somwhere there but no idea what update is originally broadcast, I get no error message.
Any ideas much appreciated
Scott
Hi Scott,.
Thanks for posting your query in Microsoft Community.
a. you have any Windows 7 installation media?
b. What is the update's KB number?
[To see which articles updates failed, try the following steps:]
a. Open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
[ b. in the left pane, click view update history.]If the update number is KB3097877, then reinstall the update KB should solve the problem. However, as you can not reach your office, I would first run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.
Method 1
When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.
Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.
Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
If you are using Windows 7 then the link provided below might help you to download and create installation media.
Download Windows 7 Disk Images (ISO files)
Method 2
If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:
- Place the Windows 7 installation disc in the disc drive, and then start the computer.
- Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
- Click repair your computer.
- Click the operating system you want to repair, and then click Next.
- In the System Recovery Options dialog box, click command prompt.
- Type Bootrec.exe, and then press ENTER.
See the following link for more information:
If you are able to reach the office, and then try to Uninstall then reinstall the KB3097877 update and check if it helps resolve the issue permanently.
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
Maybe you are looking for
-
using the formula node array index
Hello I'm new to labview... I am creating a vi that takes a number n and out the primes from 0 to n (i.e. including 1). My approach to do, he uses a formula node, but I can't understand how the table index or for each number first output. It seems th
-
I want to upgrade the m2 SSD in my desire of greater size. How do I access the drive?
-
How can I remove Imesh from my software?
I try to download the photo software Cathedral on Googl and downloaded somehow a program called IMESH and I am unable to remove it.
-
I rebooted then went to cmd.exe as administrator and typed in unregmp2.exe/updateWMPVersion. When I go to enter, it does nothing. I have little ability with it, but I followed the instructions to the letter. I tried several times without success. The
-
I need to run the accounting program MYOB 9 on my new laptop HP 64 bit with Vista Home OS.
I need to run the accounting program MYOB 9 on my new laptop HP 64 bit with Vista Home OS. Is there a download that allows me to run from MYOB and emulate windows XP?