Initial configuration of RAID HP ENVY accidentally erased, deleted hard disk?

Similar Questions

• Envy touchsmart 15 - new HARD disk size

  I recently ordered a Touchsmart from HP Envy 15-j005sa that has a 1 TB HARD drive. I'm looking to clone the orignial in an mSATA SSD drive so I was wondering what size is recommended.  How much space is used when it is new so using this information can buy a large enough disk size?

  Thanks in advance

  Hello

  There is that little clone options b clone the HARD disk which means that you have the mSATA SSD equal or more 1 TB (b) clone c ONLY: This means you the mSATA SSD equal or superior to c:... My suggestion: shrink C: for small size say even 60 GB or 120 GB (if you don't have a lot of programs installed) FRONT of clone and ONLY clone C: normally larger (capacity) is better because you can install more programs that him.

  Kind regards.

• Need help with the disks 'unreadable' configuring software raid after the death of the startup disk and system restored.

  I'm looking for some advice on how to restore a windows xp installation software raid 5 that was running on my XP system. I had a problem when the startup disk has failed, but I was able to backup the system before it can. I replaced the drive and restored the system and everything came, but I was not smart to do this and accidently left the readers connected when restoring raid. I don't know if windows has done something when I tried to install XP on the new drive, or maybe something else has happened when I restored the system from the backup, but my raid drives can not be used. There was a moment in the restaurant business I saw a message on the MBR, but I thought that was just for the drive being restored. I didn't have a single player who held any information on the other disks in the system, but I'm not 100% sure on that.

  When the system boots the windows logo screen takes 10-20 minutes before you get on the desktop. Windows Disk Manager takes 20-30 minutes to fill the list of drives and status on the disks three raid is 'dynamic' and 'unreadable' is not reassuring. I suspect it's a problem MBR or partition table that must be corrected before trying to reactive the raid, but this is just speculation.

  The raid drives are on a promise ide/scsi disk and make it appear to start correctly with names and sizes. After that I get nothing. I do not have another scsi controller (or), but I thought I'd try active @ partition recovery to see if she can find information on the disks.

  I hope someone has some experience with recovery like this, because this is a first for me. I thought I was pretty sure running a raid-5, but wouldn't you know, the tech gods have found a way to crush my plans...

  Thanks in advance for any help!

  Hello

  Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• How to reformat or restore the initial configuration of a toshiba laptop with vista WITHOUT a disk as my hard drive is defective

  helloo,

  I have a toshiba satallite laptop running windows vista but it is slow uinresponsive and I will get a new laptop so I want to sell it, but the hard drive is faulty, so I can't reformat or restore settings because these require a disc, but I need the laptop to be empty, I'm not very tech savy and I don't know anyone who is so I desperately need help Thanks for any help that can be given.

  Hello

  ask Toshibaif you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  ____________________________________________________

  the other way to solve this problem;

  Replace the CD/DVD drive, then:

  Contact Toshiba and ask them to send you recovery disks vista to reinstall the operating system as it was when you bought it

  they do it for a nominal cost of $

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• ENVY 750-055xt CTO: hard disk capacity

  The motherboard comes with 4 ports for SATA drives.  I ordered 2-drive Raid 1.  Can I use other 2 ports for two disks?  I have a 500 watt PS

  Hi @HEMI7309!

  Yes, you can use both your motherboard SATA ports and connect two hard drives. Regarding the cables, you can check for some extra power and data cables connect the drives with.

  Hope this helps, and feel free to ask any questions you may have.

  See you soon!

• envy touchsmart 15-j024sa: hard disk hardware kit

  I just got a 15-j024sa envy touchsmart, there a 126 GB ssd card but I need a disc hard material kit part No. 718432-001. If I can fit a 2.5 drive ".  Where can get a please.

  I'm in the United Kingdom.

  Hello

  Please use the following stores:

  http://PartSurfer.HP.com/search.aspx?SearchText=718432-001

  http://www.eBay.co.UK/ITM/HP-envy-15-J-Series-SATA-hard-drive-connector-w-cable-6017B0416801-/131399170824?PT=LH_DefaultDomain_0&hash=item1e98003b08

  http://www.eBay.co.UK/ITM/720545-001-6017B0416801-HP-15-J013CL-envy-15-J-hard-drive-caddy-cable-grade-A-/151187198856?PT=LH_DefaultDomain_0&hash=item2333759388

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=547

  Kind regards.

• HP Envy M7 - J078CA Touchsmart: hard disk failure Envy Touchsmart

  Hello

  To put it simply, my hard drive went south and I've never done the recovery DVDs.  Can I replace the HARD drive with a new drive, but obviously a source of reinstalling the OS need return to the default settings.  I saw another thread on the forum dealing with this same issue and explaining what to do, so I followed the steps to create a bootable USB key with the image ISO in the thread, but then realized that my model did not match the model presented in the discussion.  I wonder what is the propper iso file for my hardware (HP ENVY M7-J078CA).  I was going to add to the other thread, but thought I'd start rather cool.  If the thread is necessary I can paste a link for reference.

  Any help would be appreciated.

  Thank you

  Rick

  Hello:

  "It looks like it will install a generic Win8 or 8.1 OS, not the specific HP which has the additional hp software and drivers for the HP hardware (like the fingerprint reader, etc.) on a particular model of HP laptop.

  What I posted in my first answer is a CLEAN INSTALLER download link. It is the only link legal and available at the present time. It will work on your laptop computer to install the operating system. As I said, the drivers can be downloaded from your linked above support page.

  If you want to restore all settings with all the drivers, you must use the USB/recovery discs you must have created once you have installed the laptop first. If you don't have that, order them specific to your model of HP:
  http://support.HP.com/us-en/document/bph07143

  Contact HP:http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  The link of ISO in the thread you linked is also a link INSTALLER CLEAN, which may or may no longer be active today. I'm not sure. It is the same for all HP supplied with Windows 8 pre installed. But Microsoft withdrew the support of all these links earlier and he's not sure if the activation of these facilities would certainly be well after the installation.

  Concerning

  Visruth

• Configure a raid with a single HDD on board more than 2 external HARD disk.

  Hello

  I run Win8 Pro 64 bit with Media Center, updated Win 7 Media Library on a 27-1007ev HP all in one desktop pc with a 500 MB HARD drive inside.

  I have 2 external hard drives - one is 1.5 TB used to store data such as pictures and videos etc. NAWL, the other is a 2 TB used as a backup device.

  I want to set up a Raid mirror on the PC's HARD disk to one of the sources, without having to do a reinstall if possible.

  I appreciate the external ability could be underutilized unless I upped the HARD internal disk capacity to match.

  Any advice warmly welcomed.

  Rob

  Hello

  The motherboard in your PC's bios for RAID support.  In addition, there are only two ports SATA; one for the HD and the other for the CD/DVD drive.

  You can use a function of storage W8.  Check out this video W8 storage space.  You cannot use the current drive although I got it to work a long time ago, but have not tried to do recently.

  Another possibility would be to try a software RAID using only two USB external drives. Other possible combinations, but none are going to be as robust as using the bios RAID supported feature.

• Accidentally selected 32-bit instead of 64-bit to the initial configuration

  I chose accidentally 32-bit instead of 64-bit to the initial configuration. The computer (Satellite L630) came with a disc. If I create a recovery disc it will allow me to select 64-bit or it will create just once for a 32-bit system? Is there another way that I can return to the initial configuration?

  What model of laptop you have (L630-xxx)?

  Create recovery DVDs and test. You should not wait for a response, just to test it.
  You can also try to start installation of recovery of HARD drive, just to see what will happen.

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• How to restore music I accidentally erased?

  How to restore an iTunes music album that I accidentally erased. I have family sharing and my daughter still has but he does not appear on his music. I thought I could redownload just of his music, but he does not appear. Does make a difference that I bought and deleted on my account? I've tried everything.

  If she does not appear in the tab purchased in the app Store for redownloading iTunes, and she still has in the store and you have not reached the country, then check if you have hidden it from the Cloud: hide and expose the iTunes Store, App Store and iBooks Store purchases - Apple Support

• I accidentally erased language packs. What should I do?

  I accidentally erased my language modules while doing a scan CleanMyMac3 to save space. I need two of them who are not U.S. English. I'm under El Capitan on a Macbook Air. What should I do?

  Restore or reinstall OS X

  Restore the backup with Time Machine items

  https://support.Apple.com/kb/PH21941?locale=EN_US & viewlocale = en_US

  Restore your entire system

  https://support.Apple.com/kb/PH21952?locale=EN_US & viewlocale = en_US

  Reinstall OS X El Capitan 10.11

  PC Backup.

  Reinstall OS X from recovery

  https://support.Apple.com/en-us/HT204904

  Please delete CLeanMyMac3. It is a useless application.

  http://macpaw.com/support/CleanMyMac/Knowledgebase/how-to-uninstall-CleanMyMac-3

• I accidentally erased by iphone and all my photos are deleted. can someone help how to restore deleted photos

  I accidentally erased by iphone and all my photos are deleted. can someone help how to restore deleted photos. I do not have the backup, and it was not synchronized with library icloud.

  If you do not have a return to the top, the images have disappeared.

• Messed up the initial configuration of Win Vista on Satellite L40

  I can only think that I messed up when performing the initial installation of Vista Home Premium on my new Satellite L40.
  I finished to the high withComputer\Vista C:\Users/comet containing all my stuff AND - outside of Vista C: - a full mirror in Desktop/Chris...
  Can someone tell me if I can return to the initial configuration screen and how?

  I tried to back up the directories and then delete them and you try to restore a single directory, but the other reappears too!
  I'm obviously a complete dunce so please do not forget that and keep your simple instructions!

  If anyone can help then anyone know a number 0800 for Toshiba Technical Support?

  Thanks in advance.

  Hello

  What s your problem exactly? You can start the Vista?
  If so, what you want to change it or not?

  If you can not boot Vista and then take your Toshiba Recovery DVD and try to reinstall it again

• WSN NI 9792 safety 1.2: initial configuration? By default the username and password?

  Hello

  With NI WSN 1.1, using a 9792, I can click on the button set the permissions, and if none had been defined would simply ask me a new administrator password.  Now with NI WSN 1.2, when I click on the button set the permissions he takes me to the web interface of the 9792 and said "nobody is connected or you don't have permissions to view/edit users, groups, and permissions.»  When I click on the "connect" button, a box opens and asks me a username and password.  I scoured the notes version of the help files and the internet, and it seems there is NO documentation on how to set up the first name of username/password combination, or it indicates what combination of username/password default username there might be.  I also tried a brand new 9792 straight out of the box and load of 1.2 to this subject and it has the same problem.  Is there something obvious that I'm missing?  How a person initially configure security on the 9792?

  Hello, Garrett,.

  Thanks for your post!

  Looks like you're having need for information on how to find the information of your 9792 newspaper. When you use NEITHER-WSN 1.1 allowed us users to define the initial password and this is still the case for the 9791. The 9792 is a gateway OR WSN node and a target time LabVIEW Real-time. Its default log in information or lie in a (KB) Knowledge Base using LabVIEW or helping MAX. You use LabVIEW 2009 SP1 or LabVIEW 2010?

  The default name of the user and the password is the following:

  user name: admin

  password:

  KO

  By default the username and password for the newspaper in a real-time controller

  http://digital.NI.com/public.nsf/allkb/14D8257A7724BE85862577F90071B73F

  Help of LabVIEW

  Start > all programs > National Instruments > xx LabVIEW > LabVIEW help

  Then go to... Fundamentasl > working with egalitarian and target > how-to > control and configure a remote device from a Web browser

  Help MAX

  Open MAX > help > MAX Help (can also press F1 if open MAX)

  Then go to... Help MAX remote systems > LabVIEW Real-time targets Configuration > Device Configuration > logging into your system

  The help link above LabVIEW is called in 9792 under Related Documentation start guide that directs you using LabVIEW.

  NEITHER Wireless Sensor Network Getting Started Guide

  http://www.NI.com/PDF/manuals/372781c.PDF

  Is the information you were looking for? Please indicate if there is something else we can do.

  See you soon

  Corby

  WSN PES OF R & D

• Hello, I have an an ACer ASpire 725-0646. I accidentally erased my atheros ar5bwb222 wireless driver

  I accidentally erased my driver atheros ar5bwb222 wireless network adapter. I searched on it within 4 hours all the solutions. I have windows 8. I found 1 version on the unoffical atheros checz Web site, but it does not work. Could you please help me? I am a translator yand I really need wireless Internet access. Thank you. I have

  Hello

  If the computer was shipped with Win8, you could get to Acer Recovery Manager (start screen, Type Acer > Acer Recovery Manager Open > reinstall drivers & applications & WLAN Driver installation) to install the Wifi driver. See you soon.