Initialization of the LEDs before running the second test.

Similar Questions

• AWM 11 g - the second DataProvider initialization error on a JDBC connection

  Hello
  
  determination of 11g AW in Database 11.2.0.2 with AWM 11.2.0.2.0A fails with the error message:
  
  INI: error opening connection, generic for TxsOqServer::connectINI: error of initialization of the second DataProvider on a JDBC connection, generic TxsOqConnection::initialize
  
  An error occurred on the server
  Class of error: OLAPI
  Server error descriptions:
  INI: error opening connection, generic for TxsOqServer::connect
  INI: error on a JDBC connection, generic DataProvider initialization in TxsOqConnection::initialize second
  
  Connection to the database itself works fine, only attach AW gives the error.
  There is no other connection or session of AW present.
  Until yesterday, it was fine and now it has stopped working suddenly.
  
  Client:
  AWM 11.2.0.2.0A
  Windows 7 64 bit
  Java 1.6.0_22
  
  Any ideas?
  
  Thank you and best regards,
  Silvio.

  I just confirmed against a 11.2.0.3.0 version of MN and
  11.2.0.3.0 RDBMS, there is a bug in AWM.
  I've found a workaround until the bug can be fixed in the next
  patch. I tested the workaound and it does not work properly.

  Workaround solution:
  When you open a session in AWM and connect to your database, please
  attach an analytic workspace that doesn't have data security.
  This will initialize the data provider of the server for you session or connection.
  After that, you can connect an analytic workspace that has safely
  data security and do not get the error you have seen.

  Note:
  The bug is the combination with the security of the data AND using the custom
  AWM. Properties setting _aw.model.show.attach = y. The bug is not
  happen if you choose to define _aw.model.show.attach = n or use the parameter
  off by default quite properly awm.properties automatically set the
  analytic workspace in rw mode.
  I'll fill a bug for this report and see it being solved in the next series of patch.
  Thank you for your patience and the bug report.

• How can I set a password for firefox so that everyone must enter the password before running firefox

  My younger sister run my firefox just to this afternoon (she origin use IE), and she saw something that is not visible. How can I set a password for firefox so that everyone must enter the password before running firefox?

  Another option is the master password + extension.

  You must first make sure that Firefox uses a master password, for more details on how to do that see use a master password to protect stored logins and passwords. Then with the master password + extension in its options, go to the getting started section and make sure that "ask for password at startup" and "Exit if cancelled" is selected both.

  As with all extensions, this protection is quite weak and can be bypassed if start you Firefox in safe mode that disables extensions.

• Is there a way to know if the current modules are compatible with the latest upgrade of Firefox before running the update?

  I want to know if my Add-ons and current themes are compatible with the latest update of Firefox before running the update.

  Hello azdec.

  You can check the add page - we in addons.mozilla.org so it's just one or two. In my view, there is an extensions in the Gallery of modules that allows you to see if your modules are compatible with the newer versions of Firefox. But you'll have to look for them, because I don't know how it's called.

  I remind you that if you want an add-on to be compatible with a newer version of Firefox, you must contact its author.

  In addition, the version of Firefox you are using right now has been suspended and is no longer supported. In addition, it has known bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum stability, performance, security and ease of use. You can get it for free, as always, to getfirefox.com.

• VI controls are frozen on the second run.

  I have a VI that gives the word in another VI. Let's call them a - VI and VI - b.

  Now, when I try to run VI, one, it works as it is supposed to. No matter how many times I run and close it.

  But when she is called in VI - b, it works well for the first time and freeze all the controls on the second call (closing and try to open it again).

  What can be the reason?

  I called VI - by contributions of wiring to the VI - b connectors.

  
  

• How to read a counter value for the separation of the two edge before meter is stopped by the second edge (6602 Council)?

  I use a timer/counter with DAQmx 6602. I use the separation of two - available via DAQmx cash edge. Count between the two edges works properly, however I do not know how to read the value of the counter during the counting operation (i.e. after the first edge triggered the beginning of the count, but before the second edge triggered the end of the counting). I'll have to wait for the second goes off the edge of the end of the countdown until I can get a counter value. I need to be able to access the current value of the County during the count operation. This was possible in traditional DAQ. How can it be accomplished using DAQmx?

  Ah shoot - I was afraid that this might be the case (for what it's worth, my series of X returned intermediate values, but the material and the underlying driver are quite different)...

  You just need to take one measure at a time or you are buffer several measures of separation of the two edges at the same time?  So just to take one measure at a time, you can set a task of edges of count using the database internal time as the source using an arm start trigger (first edge) and a sample of clock (second Board) to work around the problem.

  Best regards

• A previous program installation was never completed. You must restart your computer to complete that installation before running the installation of Skype program. Setup will now close

  I get the following information on the screen.

  Skype information

  A previous program installation was never completed. You must restart your computer to complete that installation before running the installation of Skype program. Setup will now close

  Original title: installation of Skype in Windows 7 Professional

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the question on Skype.

  I will definitely help you with this.

  Please provide the information below.

  1. are you an error code?

  2. don't you make changes to the pc before that?

  I suggest you go through the links below:

  Refer to the suggestion given by John Rubdy replied on May 27, 2011:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/unable-to-install-Skype/c00745e0-39b1-49FA-b3b0-c6ed5feab9bf

  Also check out the link below:

  https://support.Skype.com/en/FAQ/FA11033/why-do-i-get-a-Windows-Installer-1618-error-code-when-i-install-Skype

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Nexus 5 K running 5.2 (1) N1(8b) affected by the second update? -CSCub38654

  I have a client that is running version 5.2 (1) N1(8b) and wanted to know if it is the affected versions.

  Release of Nexus 5 K known affected:

  5.1 (3) N2 (1 c)
  5.2 (8) N1 (1)

  Release of Nexus 5 K known fixed:

  5.2 (1) N1 (8.156)
  5.2 (1) N1 (9)
  6.0 (2) N1 (1)
   
   

  CSCub38654 - N5K switch upward hang/lock may occur because the second update https://tools.cisco.com/bugsearch/bug/CSCub38654

  Our NX - OS versions are not on the list either but to play it safe were disable NTP from June 29 to July 1, in any case, if your not sure TAC it

• Display the run including the seconds time in the planning work console

  Hello

  Of the work of one of my planning application console, I am able to see HBR including Box plots seconds run time (and not just MM/DD/YYYY HH: mm)

  It is very useful to check accurately the time my HBR!

  However, I am not capable of displaying the seconds on the console of my another planning application. Do you know where to change this option? (I tried to play with the preferences of the user date, but without success)

  Thank you!

  If you go to Administration > Application > settings > current application default > Display Options > Format of Date or it can be changed to File > preferences to override.

  Change the format of date to automatically detect and then he should change in the console work to include seconds,

  Example of

  

  Date in the preferences format has been set to detect automatically, updated and recorded

  

  Return to the console to work

  

  Seconds included.

  See you soon

  John

• How can I force DAC to run always full load for one of the task that executes the stored procedure? And remaining tasks load incremental in the second and sub sequent executions.

  Hello

  How can I force DAC to run always full load for one of the task that executes the stored procedure? And remaining tasks load incremental in the second and sub sequent executions.

  Thank you

  Jay.

  Hi if your task is running an informatica mapping you can set your DAC task to run the full mapping for incremental and full loads, so tab task just point to the mapping.

  Hope that helps.

  Thank you

• Grid Infra configuration failed when running root.sh on the second node

  Hello world.

  I am new guy on RAC environment. When you try to install Oracle RAC on the local environment, I had this problem:

  -J' have run root.sh successfully on a local first node

  -After that, the first node, there are 3 cards of virtual network created to SCAN listening addresses

  -After the success of action on the first node, I tried to run this script on the second node, but the error occurred:

  CRS-2676: Start of 'ora.DATA.dg' on 'dbnode2' succeeded
  PRCR-1079 : Failed to start resource ora.scan1.vip
  CRS-5017: The resource action "ora.scan1.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.124 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan1.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan1.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan2.vip
  CRS-5017: The resource action "ora.scan2.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.122 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan2.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan2.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan3.vip
  CRS-5017: The resource action "ora.scan3.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.123 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan3.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan3.vip' on that would satisfy its placement policy
  
  start scan ... failed
  FirstNode configuration failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 9379.
  /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  

  I tried again with several times (with left-hand) but the problem was still there. Can you explain to me?

  -Why, after running root.sh on the first node, all IP SCANNER interfaces was created on this node? This is the reason why root.sh fails on the second node.

  -How to solve?

  I use the server for address scan local DNS resolves to 3 IPs, and I can run script runcluvfy.sh with success on both nodes.

  I thank in advance

  PS:

  I use two virtual machines in vmware. After running root.sh on the first node, I checked and found this funny information:

  [oracle@dbnode1 sshsetup] $ / sbin/ifconfig

  eth0 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.66 Bcast:192.168.50.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:431 b / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 249814 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 2956882 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 24913472 (23.7 MiB) TX bytes: 4369984705 (4.0 GiB)

  eth0: 1 link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.120 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:2 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.122 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:3 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.123 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:4 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.124 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:192.168.29.10 Bcast:192.168.29.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:4325 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 471 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 664 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 82216 (80.2 KiB) TX bytes: 107920 (105.3 KiB)

  eth1:1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:169.254.75.201 Bcast:169.254.255.255 mask: 255.255.0.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  ADR inet6:: 1/128 Scope: host

  RACE of LOOPING 16436 Metric: 1

  Fall of RX packets: 10626 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 10626 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 7942626 (7.5 MiB) TX bytes: 7942626 (7.5 MiB)

  I think it's because of the failure on node 2

  UPDATE:

  That thing is normal, I ignored it and the installation can continue normally. Thank you all for your help.

• I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails, CC help | Applications creative Cloud back to update evaluation Mode to 2015 CC

• VMware Workstation and Hyper-V are not compatible. Remove the Hyper-V system role before running VMware Workstation

  Ouch. I just started to do some Win Phone 8 and development Win, and all simulators are needed for development.

  This means that a dev to Win8 may only work on their host... I'm sure it would work in a virtual machine.

  Can I make for happy? (Hyper V might have to win here... sigh).

  VMware Workstation and Hyper-V are not compatible. Remove the Hyper-V system role before running VMware Workstation

  Once you install the Hyper-V role on your host, your host is no longer running Windows 8 as the native operating system.  It runs Hyper-V as the native operating system, and Windows 8 runs as OS management within a privileged under Hyper-V VM.  With the Hyper-V role installed, * everything * runs in a virtual machine under Hyper-V.

  So to run a virtual machine under my computer in Windows 8 under Hyper-V, you must be able to run a nested VM.  It's possible with Hyper-V, the hypervisor host, but with the updates in custody, I mentioned above.

• I used the trial before run, but I bought all the apps for 20.00 a month now. When I download it to my computer, it keeps telling me that my trial has expired. I uninstalled the program and reinstalled but it always says "expir├⌐ trial" any id

  I used the trial before run, but I bought all the apps for 20.00 a month now. When I download it to my computer, it keeps telling me that my trial has expired. I uninstalled the program and reinstalled but it always says "expiré trial" any ideas on what I can do? I paid already

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• I have two frames of texts linked on one page. But during an iteration by using everyitem() he chooses the second before the first?

  
  

  Salvation by the Expert

  
  

  I have two frames of texts linked on one page. But during a iteration using everyitem() he chooses the second before the first?

  var ObjDoc = app.activeDocument;
  var LstPara is ObjDoc.pages.everyItem ().textFrames.everyItem ().paragraphs.everyItem () .getElements ();.

  for (c1 var = 0; c1 < LstPara.length; ++ c1)
  {
  by var = [c1] LstPara;
  $.writeln (par.contents.toString ());
  }

  
  

  is there a specific reason for this? Please explain
  

  To solve your problem, try the following code:

  
  var ObjDoc = app.activeDocument;
  var LstTxtFrame = ObjDoc.pages.everyItem().textFrames.everyItem().getElements();
  
  for(var c1=LstTxtFrame.length-1;c1>=0;c1--)
  {
      var LstPara = LstTxtFrame[c1].paragraphs.everyItem().getElements();
      for(var c2=0;c2
  I have two frames of texts linked on one page. But during a iteration using everyitem() he chooses the second before the first?
  is there a specific reason for this? Please explain
  Text blocks InDesign will work in LIFO method (last in first out), that is, the last image of text created will be treated as a first picture of the loop, so try the above code.
  Vandy