VI controls are frozen on the second run.
I have a VI that gives the word in another VI. Let's call them a - VI and VI - b.
Now, when I try to run VI, one, it works as it is supposed to. No matter how many times I run and close it.
But when she is called in VI - b, it works well for the first time and freeze all the controls on the second call (closing and try to open it again).
What can be the reason?
I called VI - by contributions of wiring to the VI - b connectors.
Tags: NI Software
Similar Questions
-
How controls are grouped in the front pannel "write basic series and Read.vi.
I wonder how the controls are grouped on the front. An example is the "basic series write and Read.vi. The rocker of Scripture and the 'rope to wirte' are grouped in a raised area. I couldn't move individual out of this box control when I tried to arrange the controls. How they are grouped and how do I move them individually?
Thank you.
Select the Group of controls you want to Group/Ungroup and select the option group/ungroup as shown above.no wonder in this
-
EOS Rebel T3 Led display has two lines black and white grainy to and controls are frozen help
When the unit is powered on any of the controls development works and the LED screen has only black and white grainy lines above. Tried to remove the battery to restart made no difference. If you have an idea of what happens to your help would be appreciated a lot.
Did you drop or wet? Call the Canon Service.
BTW, the battery must be removed to reset the camera like this for a week or two.
-
Windows Firewall page controls are inoperative all the
On the computer / Control Panel / all items in Control Panel / Windows Firewall, all controls/links page are dead. That said, I click it and nothing happens. This is true for all controls on the page: Sidebar and the main section to the left. Here is a picture:
It crashes me to solve the problems of LAN House. Help!
Hello
Thanks for posting your query in Microsoft Community Forum.
Let me ask you a few questions to better understand the issue.
- You do and specific hardware or software change in the computer?
- What security software do you use?
- When you say "all controls/links are dead", do you mean to say that the options are grayed out?
- Are what issues you facing the House of LAN?
- The computer is connected to the domain?
- Have you installed firewall 3rd party?
To resolve this issue, follow these steps:
1. click the button Start , then type Windows Firewall in the area of Research .
2. click on Windows Firewalland then click allow a program or feature through Windows Firewall.
3. click on the Edit settings button. If a user account control window appears, click Yes, or enter your username and password, and then click OK.You can now make changes to the Windows Firewall settings.
Note: If the change settings button is always grayed out, your administrator may have disabled the option to change the settings. Contact your administrator for help with this. If you are the administrator of the computer, restart Windows and log on with your administrator account, and then follow the steps above.
Reference: http://support.microsoft.com/kb/2620334/en-us
Check and make sure that the firewall Windows service is started.
- Click Start, and then click run
- Type services.msc
- Locate the Windows Firewall from the list service.
- Check if it is started.
If it is not started, click on Windows Firewall service and you will see the status on the top-left corner of the same window. The State is START if he is arrested.
Click START , and then restart the computer and check.
After back if still the problem persists. We will be happy to help you further.
Thank you
-
Not able to search perform the control Id added to the page running program ING. app.
Hello
I have a Page of control series created for execution of a batch of queries using the App Engine program. This engine Application program works well and does also targeted. The question is on the Page series created for this app Engine control I couldn't search for the command ID run added. Once I have click on the 'Add a new value' and add this id the app engine works very well and also in the out put it prints this added control to run ID. But when I go out to do something else and come back to this page to find the Id of control recently added, I don't find any value.
Surprisingly the other process where I use run control IDS added run ID of control.
Why this is happening. Your contribution will be highly appreciated.
Thank you
What are the records of search and search add on your serial control component?
Try changing your search folder to your definition of control record series and let us know if it works.
Thank you!
-
Firefox cannot display normal characters after the second run
After loading windows, I can run firefox normally, but after the closing and opening of firefox, it shows normal characters in the menu and the text in web pages, in the form of rectangle.
I have try shift + open and turns off modules and selected the check all box and restarted firefox, but the problem exists. even the most recent version completely uninstalled, and installed, but no income.
the only solution is lunching without failure or restart windows.
This problem is started after a system full scan with avira antivirus.
screenshotYou can try setting the Boolean gfx.font_rendering.directwrite.use_gdi_table_loading false pref on the topic: config page.
Try turning off hardware acceleration.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
-
NOTHING will work when parental controls are enabled for the childs user account
Won't launch any program on any user account that has parental controls enabled (via admin = ME)! IE, itunes, has even had a few background apps prevented such as COM Surgate, SMBus and a framework any not load. ALL these loading without probs when parental control is not activated (off) and all these programs work in the State of admin as well.
Scratchin my head here
http://www.bleepingcomputer.com/tutorials/tutorial139.html
Go to the tutorial above on this and see if you missed a step in putting in place.
See you soon.
Mick Murphy - Microsoft partner
-
I am unable to share files between 2 computers 32-bit and 64-bit windows 8. Please tell me a solution.
The number of bits of the processor is not influence it. If you are having problems sharing files, the bit of the processor is just a coincidence.
What is the error you get when you try to share a file? And what method do you use to share? Homegroup? Right-click to stock option? Or something else?
-
I can't to increase or decrease the size of any font that I want. As well as all other regular options, help please
What title is it? Why can't you change it? What is going on? Post a screenshot of what you see.
-
Run the second sql statement only if the first sql statement is set to zero.
Hey guys I seem to have a mental block here. I have two sql statements. I would like to than the second to run only if the first sql statement is set to zero. I know that I can use PLsql but I would really like to see if I can do this with sql upward. Your answers are very much appreciated.
This is the first sql
second sql statementSelect ft.fund_code, ft.orgn_code, ft.acct_code, ft.amount, fb.owner_pidm, ft.prog_code from ftrbremb fb , ftcractg ft where fb.doc_code = 'TR000038' and fb.ftpbport_id = ft.ftpbport_id
How can I combine these two statements together so that when the first is null the second run. As a bonus, I want to get just the first line as well.Select ft.fund_code, ft.orgn_code, ft.acct_code, ft.amount, fb.owner_pidm, ft.prog_code from ftrbremb fb , ftcractg ft, ftprexps fx where fb.doc_code = 'TR000038' --and fb.ftpbport_id = ft.ftpbport_id and fx.ftrbremb_id = fb.id and ft.ftprexps_id = fx.id;
Any help would be greatly appreciated. I tried to accomplish with the case statement but it dosent everything seems to work for me.
Thank youMiguel,
the idea is simple: join the two queries (via the union of all) and to change the second part as to return only the rows if the first query returns no rows by changing the NOT EXISTS (first request). Hope I made it clear... ;)
-
Using TCP on the second ethernet interface
Hello
I use a PXI 8109 Pharlap module running.
I try to use the second my PXI ethernet interface to send UDP and TCP packets. The main interface is used to manage channels Veristand.
Here is the configuration of my two ethernet interfaces:
-eth0 (primary):
IP: 10.0.0.3
subnet mask: 255.0.0.0
-eth1:
IP: 192.168.10.9
subnet mask: 255.255.255.0
For UDP, I have no problem, the packets are sent to the second interface as I want to. I think it works because there is an entry "network address" on the "Open UDP" VI so that the system can choose the right interface.
For TCP, I use the VI "to open a TCP connection" but there is not that kind of entry. And it does not work: I suppose that the system tries to use the main interface, but it can route packets...
For more information, my two networks is physically independent.
Can you help me find out what is happening? Is it possible to use the TCP protocol on the second ethernet interface?
Thank you very much
Kind regards
Laurent
-
Reminder of control not found in the DLL
I write a DLL for use in TestStand using panels in a .uir file. Callbacks for controls are in the source file for the DLL. In another DLL function, I call LoadPanel to put the Panel in memory and I get an error saying: he cannot find the callback function to the controls on the Panel.
I am at a loss as to why this is happening. The prototype of the function is in the header generated from the .uir file. This file is included in my DLL source file and callbacks for all controls are also in the DLL source file. Everything compiles fine, it fails at run time.
Am I missing something here? I used the UI stuff in DLLs before and don't remember ever having this problem.
I use CVI 7.1.1 and TestStand 3.1 (mandated by Government subscriber).
-
I have two Apple TV. The action on each distance affects the other tv. For example if I press stop on the remote control will stop the program on the other tv to. How can I stop this from happening?
Easy. You must associate each ATV with one of the remotes. Each ATV is not paired and will 'listen' to any distance.
The trick is to cover before the other ATV when matching so the two do not listen.
Silver or white remote control: pair or cancel the twinning of the Apple Remote with Apple TV (3rd generation or earlier)-Apple Support
Siri remote control: http://help.apple.com/appletv/#/atvbc9953e63
Don't know what models you have the ATV, but the whole process is the same:
1. choose a remote control and an ATV. Cover the front of the another ATV.
2. hold the remote control in 3 inch they recommend, pair it with appropriate above process.
3. choose the other remote, unlock the first ATV and block that you just paired.
4. hold the second remote control 3 inches from the second ATV and pair it with appropriate above process.
5. release the first ATV and enjoy.
-
11 GR 2 RAC - Database Control - agent system of is not the second node
I have a new system of the RAC node 2 11 GR 2 RHEL5 64 bit - it's a testbed at the moment. I installed Database Control because at the moment I don't have a separate grid control server available for this configuration. After you run DBCA, control of the database has started very well, and I could connect to the console and see the two available nodes. On a subsequent restart of the two nodes, I can start the dbconsole leave the first node, but the agent does not start on the second node. My understanding is that spear the dbconsole of node 1 should start the agents on both nodes. Is this correct? I don't know why the agent is not running or implementation on the second node. How can I start it? GC, I could do emctl start the agent, but apparently for the control of the database, this isn't an option.
Node1:
Node 2[oracle@node1 db_1]$ emctl status dbconsole Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0 Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved. https://node1.com:1158/em/console/aboutApplication Oracle Enterprise Manager 11g is running. ------------------------------------------------------------------ Logs are generated in directory /u01/app/oracle/product/11.2.0/db_1/node1_saastexd/sysman/log [oracle@node1 db_1]$ emctl status agent Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0 Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved. --------------------------------------------------------------- Agent Version : 10.2.0.4.2 OMS Version : 10.2.0.4.2 Protocol Version : 10.2.0.4.2 Agent Home : /u01/app/oracle/product/11.2.0/db_1/node1_clusterdb Agent binaries : /u01/app/oracle/product/11.2.0/db_1 Agent Process ID : 18120 Parent Process ID : 18073 Agent URL : https://node1.xxx.com:3938/emd/main Repository URL : https://node1.xxx.com:1158/em/upload/ Started at : 2010-04-27 16:49:17 Started by user : oracle Last Reload : 2010-04-27 16:59:28 Last successful upload : 2010-04-27 17:04:34 Total Megabytes of XML files uploaded so far : 2.54 Number of XML files pending upload : 0 Size of XML files pending upload(MB) : 0.00 Available disk space on upload filesystem : 58.40% Data channel upload directory : /u01/app/oracle/product/11.2.0/db_1/node1_clusterdb/sysman/recv Last successful heartbeat to OMS : 2010-04-27 17:04:35 --------------------------------------------------------------- Agent is Running and Ready
I can't see what follows from sysman/log/emagent_perl.trc on the first node:[oracle@node2 oracle]$ emctl status agent Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0 Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved. --------------------------------------------------------------- Agent is Not Running
I admit that I am more familiar with GC than DC, although not at all an expert. Any ideas?ties line no. 75 maxRowCount.pl: Tue Apr 27 16:49:19 2010: ERROR: Max Count Value not set properly in file /u01/app/oracle/product/11.2.0/db_1/sysman/config/esa/database.proper ties line no. 77
You must leave dbconsole time node. from the dbconsole will start the agent, there is no agent seprate for dbconsole
-
Initialization of the LEDs before running the second test.
I am novice programmer Labview using LV 8.6. I have an application where I have a lot of lights to indicate success or failure throughout my application in many different cases. After running these tests test that passed are indicated on the front panel with a light green. These failed tests are lit with a red LED. Is there an easy way to initialize all the LEDs return to their shutdown state before running the test a second time without reload the application?
Here is a small example. First the Boolean values are changed to true, then they return to their fake. Does that help?
Maybe you are looking for
-
I have an iomega storcenter ix4-200r, which is having problems. When it starts, I get the following error: Respawing ID "T0" too fast: disabled for 5 minutes I tried to start too live cd and edit 'inittab' but I'm not able to mount the main raid tabl
-
Pavilion 15n005tx: ralink rt3290
I need driver for ralink rt3290, driver of my laptop does not way direct link to download this driver.
-
I lost my cd, but still have cases I can load windows on my new computer desktop
Hello My old computer broke and I had a flood in my home - I have no House don't have the cd for one-stop home and student but I have my case that has the product key on it I can install some how on my new computer without the cd
-
Just bought this phone and the touch screen works not at all and the female voice is annoying please help x
-
Dell Vostro 430 sometimes breaks down and does not find the hard drive in the bios
So I have this old - ish Dell Vostro 430, intel cpu, windows 7 hard disk sata 250 GB, 4 GB of ram. Update BIOS to the latest version 2.4.0 In certain exceptional circumstances, this PC sometimes crashes in windows, it is restarted, and then when he c