Initiators of software iSCSI Microsoft Cluster in guest

Similar Questions

• Microsoft Cluster in vSphere using RDM disks

  Gentlemen, I have doubts that sounds simple, but it is better to ask than to the hurt things.

  Here, in the company where I started work two weeks ago. We have two servers of files Windows Server 2012, both are part of Microsoft Cluster Services, these two servers are virtualized on VMware ESXi 5.5, each on a host, here we use vCenter HA and DRS.

  Well, these file servers 03 RDM disks connected to the fibre channel, storage only disks are online only on node 1, node 2 drives are present in the computer Manager, but marked offline.

  To my knowledge, my experience of simple Microsoft cluster, the disks must be online on all nodes for disaster recovery is quick, for example through cluster in Windows Server 2008 R2 and Hyper-V Server R2 of 2012 using iSCSI storage and always leave the disks online on all nodes.

  My question is: is there a reason why a node drives remain online and the other node is taken offline? Because of RDM technology?

  I can then do disks on node 2 as well as online without risk?

  I'm an environment that left another analyst configured, had never made Windows Server 2012 in virtualized VMware vSphere servers cluster using RDM disks, so made the questions, so instead of simply in clicking on node 2 of disks and makes them online it is better to ask before

  Thank you!

  Ivanildo, is the normal Windows Server Failover Clustering behavior, since it is an active/passive cluster architecture, where a single node read/write a disk at a time, and is not a problem due to the use of RDMS in vSphere environment.

  The bellow image show two discs a WSFC, where 6 disk Offline on that particular node and the 7 disc is online:

  

  And, do TRY not to put the disks as offline being online on another node through disk management, this task must be performed by using the Failover Cluster Management console.

• Compatibility with Microsoft Cluster DRS

  OLA,

  Microsoft works com DRS cluster?
  Documents Achei no site da vmware than say that sim e outros as nao. Qual seria a resposta certa?

  Obrigado.

  Hello

  Microsoft Cluster works with DRS ?

  
  I found le VMware the site documents what to say Yes et others not . What would be le right answer ?

  Jones, disco os vc esta publicando cluster por iSCSI direto para o Windows e nao por Raw Device?

  Neste caso, esses disco nao aparecem na lista devices da VM, product?

  Dessa forma o snapshot deve funcionar, pq na pratica nao tem bus sharing nas configuracoes da VM. So don't o nao gerado nao sumergida os discos publicados por iSCSI snapshot.

• MS on NFS and iSCSI with cluster?

  Clustering for vSphere management guide States that only storage fibre channel is supported of the CF/MSCS clusters, so I'm sure I already know the answer to that, but...

  I have a client who wants to run a NetApp storage solution active cluster failover, configure the disks in the operating system for Windows 2008 R2 servers on an NFS volume and application driven on a DRM iSCSI data.  IOPS / s and network side, someone set up a cluster like this before, and if so what were your experiences?  I'm just trying to get an idea of what kind of potential problems to wait on the road.  I also assume that VMware is not going to support because they advise against it expressly.  Thoughts?

  
  
  -Justin

  According to me, that it will simply not work. ISCSI initiator Software in ESX/ESXi does not support persistent reservations SCSI-3, which is required by MSCS on 2008 and above. With the help of the RDM will not change it. I don't know if iSCSI HBA will work.

  The workaround for this is to use software iSCSI initiator inside 2008. Operating system can sit on NFS datastore. Quorum and the data must be on iSCSI LUNS connected via the Windows iSCSI initiator.

• ESX 3.5i / software iSCSI?

  I plan on upgrading a cluster of ESX 3.02 tomorrow to ESX 3.5.

  I would use 3.5i because of its lack of a service console, we had some problems in the initial Setup, getting the iSCSI traffic because we have an iSCSI subnet separated from our hosted customer (who is on 192.168.x.x network).

  Although I am quite familiar with 3.5i - I still try to use the software iSCSI with this version.   Can it be done?

  Sven

  It should work without problem.  You will need to create a separate vSwitch for the iSCSI network with a kernel port assigned to the iSCSI IP address range.  You will also ensure that iSCSI is allowed through the firewall.

• Software problems - Microsoft Office - Toshiba Bluetooth Stack

  :_| Hi all

  I use a USB Bluetooth dongle to transfer data between my PC and my cell phone.

  Since the installation of the software Toshiba Bluetooth Stack (first of all, I used the 5.0 and later upgraded to the last 6.10.10) I have problems with Microsoft Office.

  When I try to double-click any document office (Word, Excel etc.) It takes about 30 seconds for Word to open software and then additional 30 seconds for the Office document to open it in the software-> almost 60 seconds!

  But when I open the desktop in the start menu software - programs - Microsoft Word, it is opened in about 2 seconds! However, while the office is _opened_:
  1. when opening a document threw the file menu - open there are still 30 seconds for the document to open.
  2. When you try to open any office document (while the office is open) threw the Windows Explorer, it takes 30 seconds.

  Now, I am writing in the Toshiba forum because when I cancel the Bluetooth manager of the _msconfig_ utility and reboot, the PC and the Office once again is working percfectly.

  Help, please

  PS
  I use Windows XP Home SP3

  Hallo Danny

  Maybe to stupid questions, but I want to know which laptop Toshiba model you have and who is the manufacturer of the Bluetooth USB dongle that you use to transfer data?

• I have two version of the software of Microsoft one is work & the other is Works 7.0. Can you delete safely, I'm no computer expert.

  I have two version of the software of Microsoft one is work & the other is Works 7.0. Can you delete safely, I'm no computer expert.

  Sure, just go to Control Panel / Add/Remove programs and uninstall the version that you do not use.

  John

• Cannot find software for microsoft lifecam vx800

  Cannot find software for microsoft lifecam vx800 on p.c. that I try to upgrade to windows 7. telling me it is not compatible with windows 7 and t uninstall it. did it, but still won't let me upgrade t

  Unplug the unit from the PC. Restart the power off PC. Check in Control Panel programs and features for any reference to the Lifacam. If it's there, highlight it and delete. Chweck for the reference to the Lifecam Device Manager. If there, remove it. Reset. Repeat the upgrade.

  Tom Ferguson

• I can't get the Microsoft wired keyboard 500 to work on my laptop. I bought a PS2 Connector USB to actually connect to laptop. I also downloaded the software from Microsoft, but still nothing. Does not work.

  Remember - this is a public forum so never post the private information such as email or phI cannot get the Microsoft wired keyboard 500 to work on my laptop. I bought a PS2 Connector USB to actually connect to laptop. I also downloaded the software from Microsoft, but still nothing. Do not work.one numbers!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Louise South,.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you to uninstall the software and reinstall it from the link below.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Check whether the problem is resolved.

  Method 2:

  Follow the instructions in the link below and check if the problem is resolved.

  Troubleshoot wired keyboards that do not or only the erroneous characters category
  http://support.Microsoft.com/kb/258826

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• 'HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Run\\AVP '.

  When starting my computer, I get a back message asking how to start windows with 3 options from windows startup using normal? not sure of the exact message.  during the scan of my computer this virus appears (see below).  I'm unable to remove.  How can I fix it.  This happened to another one of my computers and I sent him to be fixed.  My new computer is 28 days old.  Help, please!

  'HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Run\\AVP '.

  Hello

  Check carefully for malware, then run cleaning as shown below - and then if necessary run start
  Repair. There is also a link to a repair if necessary install (allows to maintain programs and)
  data).

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware. This allows you to keep the
  programs and data backups redundant but are always a good idea.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Hello, how can I find the best internet connections for my windows seven? I use my cell phone internet phone with a usb cable.is there any software from microsoft to help me?

  Hello, how can I find the best internet connections for my windows seven? I use my cell phone internet phone with a usb cable.is there any software from microsoft to help me?

  Hello

  The fastest internet connection depends on your internet speed provided by her Internet (ISP) Service provider. Therefore, contact them to receive a best speed of the internet.

  For more information:

  How to increase the speed of navigation: 7 ways to work faster on slow connections

  http://www.Microsoft.com/atwork/remotely/connections.aspx#fBid=TN-_TCHYDMB

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=1vrPRuhAhAg

  Internet Explorer is slow? 5 things to try

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  It will be useful.

• MSCS - NLB Microsoft cluster

  Hello

  We have 4 cluster NLB nodes on Production site and we expect protect it with MRS. 5.1.1.

  SRM 5.1.1 supports 2-node Microsoft Cluster Server (MSCS).  vSphere 5.1.x supports up to 5-node MSCS. SRM 5.1.x supports 2-node MSCS.

  Is it possible to have 4 NLB nodes in production and to protect only two nodes with MRS? as we just need two nodes for DR.

  Not sure, but I think you mix two features here, MSCS, and NETWORK load balancing. The restrictions apply to MSCS, but not NETWORK load balancing (unless I'm missing something).

  André

• Software iSCSI configuration

  Where we get number IQN that we need to manually enter static configuration of the software iSCSI discovery.

  It depends - some have the ability to not be discovered. Give it a try, in case of doubt. If this does not work, then you will need access to the management interface or know someone who can.

• Is there a way to remove the software iSCSI 10W?

  Hello

  We have helped the software iSCSI adapter, add 'Vitrtual Switch' and 'Port group' for iSCSI testing.

  Now, we have already deleted the virtual switch and would like to know if it is possible to remove the software iSCSI adapter?

  OR Alternatively, we can leave the adapter software there without deleting?

  Thank you

  Post edited by: TonyJK

  You can remove the software iscsi adapter by disabling everything first. Under the SWiscsi adapter > properties > configure > disable activated.

  After that, the server will request a reboot for the change.

  After this restart, swiSCSI adapter would have been automatically deleted.

  -HTH,

  zXi

• How to add the software iSCSI adapter in vSphere, ESXi 5.0?

  Hello

  Please give me the steps to add the software iSCSI adapter in vSphere, ESXi 5.0.

  Thank you.

  Hello

  In an earlier version of VMware ESXi software iSCSI adapter was included in the list of the storage card, but is not in the case of VMware ESXi 5.0. In ESXi 5.0 iSCSI adapters are not listed by default and must be activated first before we go away from configuration.

  How to add iSCSI adapter in ESXi 5 check the link below

  http://www.google.co.in/#sclient=psy&hl=en&source=hp&q=How+to+add+Software+iSCSI+Adaptor+in+vSphere+ESXi+5.0+Site%3A+blog.srinfotec.com&pbx=1&oq=How+to+add+Software+iSCSI+Adaptor+in+vSphere+ESXi+5.0+Site:+blog.srinfotec.com&aq=f&aqi=&aql=&gs_sm=e&gs_upl=9181l21561l0l21875l33l30l4l0l0l0l736l10898l3-8.7.7.1l23l0&bav=on.2,or.r_gc.r_pw.&fp=1ad7a99e02298f12&biw=1366&bih=647

  or

  http://blog.srinfotec.com/?p=178

  concerning

  Rohit