Insert a Clip with/without moving the other layers

Similar Questions

• How to insert the time at the point of reading without moving the other layers of return by hand?

  Hi, is there a process whereby say 2 seconds can be added to the timeline where the playhead is without having to go in 2 seconds all keyframes and publishes on the other layers by hand?  Time can be inserted in order to easily move everything to the right of the playhead time - without having to click and drag all the other layers?

  Thanks (sorry to ask such a basic question... its been a week long, long)

  Yes, one edit insert will place a new layer in the timeline panel and push all the layers at the end of the additional layer. Thus, if the new layer is 2 seconds in length, all existing layers at that time will be pushed 2 seconds. Keep in mind that if the existing layers do not stop at the CTI/head of reading, an insert edit will divide them into two, so that the first part is before the new layer, and the second part jumps after the duration of the new layer. This happens because After Effects uses layers, rather than titles as do the editing applications. If the existing layers end or begin in the ICT, it won't happen.

  To create a photo insertion, alt-double click a footage item in the project Panel, and this will open the film Panel. Choose an In and Out point (use the {and}) for images set the duration and press the Insert button (see image below) mounting. This will insert the item of film as a new layer at the moment and push everything at the end of the new layer.

  

  If you don't want to not add a new layer, but just create a second gap 2:

  1. Select all layers (Edit > select all or Ctrl + A on Windows, command + A on Mac).

  2 split layer (Edit > Split)

  3. manually, select the 'second part' to cut layers and press the left bracket ("[" "]"), so that all these layers move in time so their points are at the head of reading/CTI.

• Export only a single layer as an image without hiding the other layers?

  I know I can just do a single visible layer, and then save PNG, for example . But my question is: I have to do all the other layers in order to save invisibile only my one layer as image? Or is there a way to record only a single layer (or a few at a time) without hiding the rest of them?

  If you have Photoshop CC, you can use the new Adobe generator to export single layers without worrying about the other layer visibility.

  If you do not have CC or you do not use the generator, you must either turn off layers or fooled into a new document. Photoshop itself cannot save a single layer in a document of several layer.

• Automatic color correction with regard to the other layers

  Hello

  This thread is about Photoshop Color Correction the edges of a layer corresponding to the next layer below. Please see the image define:

  

  I shot around 16 photos of the site above and less Photoshop > file > Scripts > load files into stack. After browsing and selecting my 16 stills, I checked "attempt to automatically align source Images". Above is the result. Photoshop fantascially aligned images, but because of the edges on separate layers, you can see the layers separately.

  My question is, can somehow, Photoshop can automatically correct the colors of the edges of a single layer, referring to the sub layer.

  Thank you

  -Amstos.

  After aligning, use Edit-> auto-merge layers...

• Scale multiple objects, with the Center as a reference point, without moving the Group

  Hello-

  I want to scale multiple objects, their Center, without moving the group. I found how to change the objects of the Centre (setting of the reference point in the transformation to the Center and using the free transform tool Panel), but I would choose a bunch of objects and move towards the top of the Center, without the group get larger.

  I want to use it for the highlights on the plans. Say I have 25 small circles with numbers in them on the plan and I want to blow up to 200%, but I want to stay in the same place, is it possible to do both? Or do I have to re - intensify each object individually? The problem that I am running is even if I'm upgrading the scale objects from the Center, the moving objects and losing their place on the map. So, I made each of them individually.

  Thanks for any help!

  Not quite what you want, but if you make one, you can select the rest and the object > transform again > transform again individually.

• need to do a second 20 HD clip with a moving background image and the text it is flies in...

  Hi all the effects quite new based on im and the need to make a second 20 HD clip with a moving background image and the text it is flies in. I also need to create a cross-image basis. If someone could suggest the best way to do this it would be greatly appreciated. Thanks in advance

  Your question is not really explain much of what you need to achieve.  I don't know what a "cross image database", sorry.

  After Effects is a fairly complex application, and you will get much more satisfaction if you start at the beginning and learn the basics before jumping in too deeply.

• Copy the pictures, and then change those copied without affecting the others

  I'm trying to copy frames and change those copied without affecting the others.
  
  For example copy frame1 in box 2. When I change the frame 1/2, they change and I wan't to do not change after you copy on frame 2. Thing is that I have around 10pics on a chassis, converted film of symbol. When comes to this symbol, the images are on the same frame, but can be changed individually
  
  Pls help ASAP... I need to do emergency

  "CipiClaudiu" wrote in message
  News:f68r5n$OAG$1@forums. Macromedia.com...
  > I'm trying to copy images and edit those copied without affecting
  > the
  > other.
  >
  > E.g. copy frame1 in box 2. When I change the frame 1/2, they
  > time
  > change and I wan't to do not change after you copy on frame 2. Thing
  > is I
  > have around 10pics on a chassis, converted film of symbol. When coming
  > who
  > symbol, images are on the same frame, but can be changed individually
  >
  > Pls help ASAP... I need to do emergency

  It looks like you copied a symbol from one image to another, then
  "gone in ' and edited this symbol... what you need to do is create a copy
  the symbol and change this one instead... IOW...

  step 1:
  'symbol1_mc' in the library is duplicated to create 'symbol2_mc '...

  Step 2:
  you copy your picture 1 on frame 2 of the timeline just as you did

  Step 3:
  Use the properties panel to switch on stage (and the second image)
  "symbol1_mc" with "symbol2_mc"... so that you now have 'symbol1_mc '.
  frame 1 and 'symbol2_mc' on frame 2

  Step 4:
  then edit "symbol2_mc".

• Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

  Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

  These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

  Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

  

  > options > advanced > General.

• Is there a keyboard shortcut for "Asked Set rest" yet? If so, it would be convenient so it could be live if necessary without moving the mouse.

  Is there a keyboard shortcut for "Asked Set rest" yet? If so, it would be convenient so it could be live if necessary without moving the mouse.

  Cmd - P (Mac)
  CTRL-P (Win)

• How to move a selection without moving the pixels?

  G ' Day, I'm looking for the shortcut/best way to get around a selction in photoshop, without moving the pixels in the selection.  Basically, I want to use as an aid to painting airbrush selection and need to quickly move the selection WITHOUT affecting the actual image pixels.

  Thank you

  Try to hold down the M button to move the selection, while the brush is active.

  -Christmas

• Can I change the properties of an individual link on an HTML page without changing the other links?

  Hello

  I have a contact page created in Dreamweaver and have created an e-mail link to start Outlook if clicked. However, all the links in my design have been updated a way, i.e. the stunned white text background more dark. My email link is however, on a white background so that you can't see against white. I want to come in and simply change the color property of the binding of e-mail without changing the other colors of link on the page. I tried but without success. Is this possible to do?

  Thanks in advance for any help!

  Try this-

  [email protected]"class ="special">[email protected] "
  

  and -.

  {a.Special}

  color: Red;

  text-decoration: none;

  }

  {a.Special:hover}

  color: Blue;

  }

  Murray

• How can I change base without changing the others?

  Is it possible to define a color in a theme as the basis without changing the others?
  
  THX
  Andrew

  Hi André,.
  Currently, you cannot reset the base color without affecting the others. The base color causes all other colors.
  Saami

• One form of layer appear and disappear all the other layers

  I do several layers with a single shape in each layer and I need them all to display on my screen. Whenever I click on a layer to modify, all forms of the other layers disappear until I click on a new layer so that its shape appears and others disappear and so on and when I try to save the image, the resulting image is a blank page. Can you help me??

  Hi eslam_m,

  Would you suggest to reset the Photoshop preferences and then try to create several shape layers and modify them.

  For the restoration of preferences: https://helpx.adobe.com/photoshop/using/preferences.html

  Kind regards

  Claes

• New update of CC 2015 causing pasted Illustrator object fall behind all the other layers

  With the new CC 2015 update, I just did this morning (and of course had questions bizarre late development and other, but which is not the issue right now) I noticed that when I use Illustrator, when I paste an object, rather than stick it on top of all the other layers, as he always used it sticks now these objects behind all other layers. This makes more than a little uncomfortable when I paste something and then try to move to see that I reinstalled some point stood above it. Does anyone know if there is a setting I'm missing bring Illustrator back to paste objects on top as it did before? Very much appreciated.

  'Draw back' is not accidentally enabled?

• Script: A single layer to set the opacity of the other layers?

  Hello

  I have a lot of layers in my computer whose name begins with "POINTER_".

  I need these layers to falter at the same time.

  But I can't the subcomp or use stencil alpha.

  I don't know that it is possible to make a script on an adjustment layer that would do just that.

  All he needs to do is to allow me to make keyframes this adjustment layer opacity associated then with the opacity of each layer starting by 'POINTER_ '.

  I'm not a guy of script, so it would be great if someone could show me how to do this.

  Thank you very much!

  see you soon,

  Chris

  You don't need a script to do this; you need an expression.

  You can easily bind properties between layers with expressions. In this case, you apply an effect cursor Expression to your layer zero (or just use the property opacity of an adjustment layer). ALT-click on the opacity for one of your layers property then use the pick whip to choose cursor effect or the property opacity of your layer of control. Now, when you change the value of a single layer, the others follow. You can copy and paste the expression resulting from your icon from selection for the other layers. (You can even choose to copy expression only and then paste that to the rest of the layers).