Insert text field nested inside the symbol of JQuery .html

Similar Questions

• Dynamic text field showing only the number 2.

  I am writing a scrolling shooting game and I have a dynamic text field that keeps the score.  Running inside an ENTER_FRAME event listener, it updates all the images.  By tracing the variable "score", I get the good numbers appearing in the output tab, but on the screen, I see only the number 2. It doesn't matter what position in the number, it is (ie: 20, or 10372 or 521), this digit will be displayed.  If there is no number 2 in the partition, the field shows that the word "" Score: "."

  The variable is declared as such:

  var score: int = 0;

  "The text field is called scorecard and is set to"Classic text"and a dynamic text ' and it's 638 pixels wide (almost the entire width of the scene).

  Here's the code to update the scorecard:

  scoreCard.text = "Note:" + score.

  trace (score);

  The track was simply put in to see if the score was being counted until properly, what is.

  I also tried to eliminate "Score:" and simply used:

  scoreCard.text = score.toString ();

  and got the same results.

  Any ideas of what could be the cause?  From everything I've read, this method should work.

  Eric Gray

  Incorporate (police) all the numbers, and then try again.

• animation inside the symbol depends on the click counts

  Hello

  for example, there is a hammer striking the rock

  If I clicked 1 time - cracked rock (animation inside the symbol)

  twice - destroyed semi

  Triple - completely destroyed

  I have tryied this but it plays all the animations at the same time:

  -Make stop() end of each animation

  -by clicking on the symbol:

  var i = 0

  i ++

  {if(i==1)}

  Play('1000')

  }

  i ++

  {if(i==2)}

  Play('2000')

  }

  and so on

  but he plays any animation

  where is the error? =)

  Hello

  Here's a demo file: incrementingButtons.zip - Box

  I use a global variable. I put it with the Panel of compositionReady: sym.setVariable ("i", 0). You can also use the creationComplete Panel.

  Then I increment in a panel of the event (for example: click): sym.setVariable ('i', sym.getVariable ("i") + 1);

• Adobe edge animate. Parallax inside the symbol

  Hello. Help me please do Parallax inside the symbol, not the whole

  Here is the project: Dropbox - Untitled - 4.rar

  Hello

  Here's an idea:

  code compositionReady:

  term var = sym.getDuration ();

  var width = sym.$("Stage").width ();

  sym.setVariable ('onMove', function (posX, posY) {}

  Chronology of the var = Math.round(posX/width*duration);

  sym.stopAll (timeline);

  } );

  Code of course. MouseMove:

  sym.getVariable ("onMove") (e.pageX, e.pageY);

  Note:

  sym.stopAll () target all symbols.

  If you want to target certain symbols, you can use the code below:

  term var = sym.getDuration ();

  var width = sym.$("Stage").width ();

  sym.setVariable ('onMove', function (posX, posY) {}

  Chronology of the var = Math.round(posX/width*duration);

  SYM. Stop (Timeline);

  sym.getSymbol("s1").stop (timeline);

  } );

• Print everything that is typed in the text field without printing the text fields

  Hello

  I am trying to print a form once filled the text fields I want to print just what I typed in the field, not the text field and the color in the text field. I use CS3.

  Any help would be appreciated!

  Hello Teddy and wellcome to the Group!

  If you want to change the fonts or other things, then you will need to use the PrePrint method. What I usually do is select PrePrint in the 'Show' section in the Script Editor (if you did not go to the toolbar at the top, Windows and select Script Editor). After selecting PrePrint you can now either type the name of the subform and the field you want to change (or you can place the cursor in the script dialog box, hold down the CTRL key and select the field with the mouse) and enter in the JS to change font. It's something like TextField1.fillcolor = "255, 255, 255; (which changes the background in white fill). You can also replace fillcolor fonts or border to change the color of the police or the border. I put a link to an Adobe website that goes over the color JS below changes. You just need to add a method of pre-press for each field that you want to remove the necessary on highlighting. Then once the user hits a button print that you have on the form or use CTRL + P to print the form, it will remove any highlighting.

  Now on the text field does not itself feel that I do not know what you ask for. You ask for the legend does not print or not there is a box around the data entered. If you don't want to have a box surround the text field located in the section purpose of the field (see image below). You just need to select none, if you want to just text. If you want to change that with JS, I put another link below that has the code to change the color of the border in white and the user can't see it. If you do not want to print the legend, the only method is to remove the legend from the text box and replace it with a static text that can be hidden, but I guess that it isn't what you're talking about (correct me if I'm wrong however).

  

  http://partners.Adobe.com/public/developer/en/LiveCycle/Designer/PDFs/ChangingFieldAndSubf ormBGColors.pdf

  https://forums.Adobe.com/thread/1409617

• Text field element submits the page when you press ENTER

  My page has
  -a 'text field' point
  -a 'Send' button (and a related branch, which works correctly).
  
  Management is working properly, when I hear some data for field text Item.
  and I press the submit button.
  
  I would like to the text field do the same action,
  When I press ENTER,
  After completing a few data for the text field.
  
  Currently, this does not work, and I get the following message:
  
  "ERR-1777: Page 121 provided no page at junction."
  Report this error to the administrator of your application.
  Restart the Application.
  
  I also tried the "(always present when the page Enter Presseds) text field" setting
  for the parameter "display as" Item.
  
  You can try my page at:
  http://Apex.Oracle.com/pls/OTN/f?p=9218:121
  
  Thank you very much
  Marios

  PS

  Make sure that the unconditional branch has a sequence number greater than all other branches - Apex will use the first part, that it can find which corresponds to the current situation. I tend to use 999 for the sequence numbers of the unconditional branches.

  Andy

• I have created a form in Indesign. Is there a way to create the default text in a text field that displays the interactive pdf "insert text here" in the text field?

  I have created a form for the company, so that I work. It is a form that will be used in several offices and has buttons, drop downs and text fields. One of the text fields has a requirement that when the PDF file is opened, the text field has something written in there already, as an example (and one only) INSERT the TEXT HERE. I created the text field in Indesign and used the text tool to type in the area of the body-copy required. After that I have to export it as an interactive PDF, text in the text field disappeared.

  Drop-down lists give an option for a default choice, but I don't see a way to create default text in the Panel of buttons and forms for text fields. Is there a workaround or a hidden feature?

  Thank you!

  Set it in Acrobat.

• Cut out white space from a text field (I give the points of response as candy!)

  Hello
  
  I need to cut all the white space characters that occur before and after all no white space in a text field.
  By white space, I mean:
  -space chr (32)
  -chr (9) horizontal tab
  -line break Chr (10)
  -return Chr (13)
  
  So, using this example:

  CREATE TABLE test (
  id NUMBER,
  value VARCHAR2(100));
  
  INSERT INTO test (id, value) values (1, chr(32)||chr(9)||chr(13)||chr(10)||'a'
  ||' '||'b'||chr(10)||'c'||chr(13)||chr(10)||chr(32)||chr(9)||chr(32));

  I need to end up with:

  a space b linefeed c

  So I want to get rid of the white space beginning and end, but keep the white space inside the string.
  
  I can't do it with the TRIM function alone. I could do many iterations of replace the spaces with something bind ' # ' and then cut it, but the characters of white space can be in any order.
  
  I tried

  REGEXP_REPLACE(value, '[^:space:]')

  but that does not give a correct result.

  Use the trim (regexp_replace ("(\S+) \s* \s*','\1", value)):

  select  id,
          '[' || value || ']' val,
          '[' || trim(regexp_replace(value,'\s*(\S+)\s*','\1 ')) || ']' new_val
    from  test
  /
  
          ID VAL                            NEW_VAL
  ---------- ------------------------------ ------------------------------
           1 [                                [a b c]
             a b
             c
                   ]
  
  SQL> 
  

  SY.

• condition tag applied to insert to insert text not hiding all the Insert

  Hi all

  I am running FM12.0.2.389 on Win7-SP1 (64-bit) laptop with i7 & 16 GB of RAM.

  As Arnis had mentioned on a post on the use of tags condition with tables, applying the condition for the character of point tag insertion conceals the entire table when you hide that tag. It's the way I always saw tags condition applied to the insert text, too much work. However, this is not what I see now, but I don't know if what I'm seeing is "as expected" typical behavior, or a new change since FM9 (jumped FM9 FM12), or if there is a problem with my installation of FM. "."

  Here's the scenario: I have FM files that serve as overlays of text in multiple documents ("insert FMs" for clarity). The entire library of files FM has deployed several condition tags and variable to accommodate more boundaries between nearly identical products, U.S. / International English and more short documents output the same set of source files. For the sake of discussion, I'll use an example which includes 4 labels of condition:

  • 3D (specific products)
  • LI (specific products)
  • Kit (specific output)
  • Installation (specific output)

  Insert FM has 3D and LI tags as appropriate. Container FM has 4 of all labels in the game. The tag is the FM Kit insert insert text for the Insert marker. When I'm running Kit, I can show 3D or LI and achieve the expected results. However, when I hide Kit, text inside of the FM which is tagged with insert regardless of the specific tag always present, even if the rest of the FM in medallion is hidden. I am pleased to provide you with a ZIP of the files needed to use as a sample.

  I don't remember ever having this problem in FM7 or FM8 FM9. (I was a user of FM since the FM5.5 and the use of tags condition since FM6.) Is this normal? Is this a change designed as? Or am I facing a sort of weird corruption of my particular FM installation?

  Thank you

  René

  Hi René,.

  A text overlay behaves in a similar way to a table. It is anchored at the insertion point, and you apply the condition to the anchor to condition it. When you apply the condition to the Insert, all content conditionally marked in the box becomes a combined condition, i.e. the Insert with 3D and conditions of LI now has Kit, Kit & 3D and conditions of Kit & LI.

  Therefore, you have to build the Boolean expression to show or hide so combined cases. In order to hide the KIT and 3D interior and conditions LI of the Insert, the Boolean expression would be:

  not ("Kit" or (("Kit" et "3D") or ('Kit' and 'LI')))

  Simply hide only Kit will not hide a combined condition (e.g. Kit & 3D).

• I work in forms in Adobe Acrobat Pro - My Add a text field and add the jump buttons checkbox in the page and do not place I wish it. How should I do?

  I'm working on a scanned page that I insert form fields. I used this exact page before with no problems, but now when I go to add a text field in the box, it jumps all over the page and not have a place where I want to. How can I solve this problem. I tried to open a blank version of the page and they all do the same thing.

  Go to view show/hide - leaders & Guides and uncheck the snap to grid

  option.

  Wednesday, June 11, 2014, at 8:42, surfer hawaii [email protected]>

• Insert text before images in the email

  I want to add text over my images in the e-mail.  I use the Apple Mail application.  I go to photos, select photos, then share, then by mail.  But I don't see any way to get the pictures to slide down, so I can insert text.  Any ideas?

  In the new message window, click in the white space to the left of the image and start typing. You can't see a cursor immediately after clicking, but the test will be registered.

  

• Muse of the synchronized text fields disabled during the download of 3rd party hosting

  The customer site is done in the office and in a version of the phone. The text field for the menu of the day, which he is editing with the 'inbrowserediting.com' function is implemented as a synchronized text. Great, but it does not work! I assumed that it is has something to do with PHP, then I changed hosting and now all these features (also the supplier confirmed it).

  But once again: it does not work.

  After downloading by ftp to a third host, I get the message, that muse disabled the inbrowser function because it seems the host does not support redirection of Web sites.

  -> and then... the text synchronized the ist field cannot be changed.

  I contacted the supplier and that he thinks that all actions are enabled and it should work

  The question now is:

  Which confirms exactly MUSE during the download? are there other technical bases that must be met? I can't find something. No description about this article.
  

  Y at - it ideas? Thanks in advance!

  I found the solution in this discussion (which I have not found before... Sorry ;-).

  Re: Why I can't use in browser with synchronized text editing?

  Thanks anyway!

• Format custom text field only when the field is filled

  I have created a form that I need to have the format of a text field "model:"& value of text field, then when it is empty so it is just empty.»

  I put event.value = "template:" + event.value; "." in the format custom properties of the text field it set to format correctly, but if it had not entered in this field he said always model: so what should I do for it to be only occur when there is something entered in the field.

  Change to:

  If (event.value) event.value = "template:"+ event.value; ".

• How do fill you a text field based on the entries in other text fields?

  I would like to be able to have a text field that fills as 'Full' or 'Incomplete' based on the question if all required fields have been filled or not.

  For example, if the "First Name", "Last Name" and "City" text fields are not filled, the text of "the State of completion" field displays 'Incomplete' and once they are filled, the text of "the State of completion" field will turn into "Complete".

  How can I do this using javascript? I searched the web for a tutorial, but most of the results seems to be focused on the menu drop-down.

  Please point me in the right direction!

  Try the script below. I put this on the calculate for Field1 event

  If (FirstName.rawValue == null |) LastName.rawValue == null | City.rawValue == null) {}

  Field1.RawValue = "incomplete."

  }

  on the other

  Field1.RawValue = "complete."

• Why a form in InDesign CC 2014 multiline text field wraps not the text in the exported PDF file?

  I created a form in InDesign CC 2014. The form fields are text with a font size of 12 point and multiline text attribute. I export to PDF interactive form. Open the PDF file in Acrobat XI. When I type in the form field, the text is centered vertically in the form field and wraps around, when I type a value in addition to a line of words in the field.

  I would like that text to start at the top of the field and fill down. Also, I would automatically wrap it around the input text.

  Any advice?

  Delete any point in the name field.

  There is a problem like that if there is a point understanding between the words or numbers in the name of the text box in the button panel.