Inserting data into one table to another table.

Similar Questions

• Insert data into one table other frome table

  Hi all
  
  I have a table called TRXN with 43 GB of data with a primary key... I have another table named TRXN_P with 15 GB of data...
  
  some of the files of TRXN_P are already there in the TRXN table... I want to insert these remaining data in TRXN_P table TRXN?
  
  How can I insert?
  
  any suggestions please?
  
  Thanks in advance...
  RAS

  Try this

  Directory of username/password query dumpfile = table_TRXN_P.dmp dump_directory_name = TRXN_P = expdp:------tables ' where your_unique_column_name not in (select your_unique_column_name from TRXN) "= TRXN_P

  Username/password directory Impdp dumpfile = dump_directory_name = table_TRXN_P.dmp remap_table = TRXN_P:TRXN table_exists_action = add

• Insert data into the table without using the insert or select the command

  Hello
  
  Is there anyway to insert data from one table to another table, without using insert, and then select the command in the same pattern.
  Note: the two tables have the same structure.

  ALTER table... Swap partition...

• What trigger to use to insert data into the table db forms

  Hello
  
  My form is current having a block of database with the table reference. When you enter data into the form field and click Save. Automatically record is inserted in the database table.
  I want to do this under manual insert. I changed the block of data to a data non-base. Where should I write the insert statement to insert data into the table.
  Is - shutter release key of the form-level validation?
  
  Please notify.
  
  Thank you
  Didi.

  You can guide me how to remove the message FRM-40401 no changes to save and instead, I wanted to put 1 transaction record successful... some like it like that.

  Hi didi.
  And this is my last post I'll sleep. ;)
  Take form level trigger named preform
  and write on it

  :SYSTEM.MESSAGE_LEVEL := 5;
  

  I hope this works...

  Hamid

  Mark correct/good to help others to get the right answers. *

• How to insert data into the table by using the expression builder in the assign activity

  How to insert data into the table by using the expression builder in affect business in BPEl, I use SOA Suite 11.1.1.5
  Can someone help me please

  Hello

  I don't think that oraext:query-database() can insert data into the table.

  What are your needs?
  Can not you plan to use the DB adapter with the insert operation?

  Kind regards
  Neeraj Sehgal

• Doubt about inserting data into a table

  Hi all, when I try to insert data into a table through an anonymous block, the pl/sql block runs successfully, but the data are not get inserted. Can someone please tell me where I am doing wrong?
  

  SQL> DECLARE
    2
    3  V_A NUMBER;
    4
    5  V_B NUMBER;
    6
    7  v_message varchar2(25);
    8
    9
   10  BEGIN
   11
   12
   13  select regal.regal_inv_landed_cost_seq.NEXTVAL into V_A from dual ;
   14
   15  select regal.regal_inv_landed_cost_seq.currval into V_B from dual ;
   16
   17  INSERT INTO rcv_transactions_interface
   18  (
   19               INTERFACE_TRANSACTION_ID,
   20               HEADER_INTERFACE_ID,
   21               GROUP_ID,
   22               TRANSACTION_TYPE,
   23               TRANSACTION_DATE,
   24               PROCESSING_STATUS_CODE,
   25               PROCESSING_MODE_CODE,
   26               TRANSACTION_STATUS_CODE,
   27               QUANTITY,
   28               LAST_UPDATE_DATE,
   29               LAST_UPDATED_BY,
   30               CREATION_DATE,
   31               CREATED_BY,
   32               RECEIPT_SOURCE_CODE,
   33               DESTINATION_TYPE_CODE,
   34               AUTO_TRANSACT_CODE,
   35               SOURCE_DOCUMENT_CODE,
   36               UNIT_OF_MEASURE,
   37               ITEM_ID,
   38               UOM_CODE,
   39               EMPLOYEE_ID,
   40               SHIPMENT_HEADER_ID,
   41               SHIPMENT_LINE_ID,
   42               TO_ORGANIZATION_ID,
   43               SUBINVENTORY,
   44               FROM_ORGANIZATION_ID,
   45               FROM_SUBINVENTORY
   46  )
   47
   48  SELECT
   49       regal.regal_inv_landed_cost_seq.nextval,      --Interface_transaction_
  id
   50       V_A,                                          --Header Interface ID
   51       V_B,                                          --Group ID
   52       'Ship',                                       --Transaction Type
   53       sysdate,                                      --Transaction Date
   54       'PENDING',                                    --Processing Status Code
  
   55       'BATCH',                                      --Processing Mode Code
   56       'PENDING',                                    --Transaction Status Cod
  e
   57       lc.quantity_received,                          --Quantity
   58       lc.last_update_date,                          --last update date
   59       lc.last_updated_by,                           --last updated by
   60       sysdate,                                      --creation date
   61       lc.created_by,                                --created by
   62       'INVENTORY',                                  --Receipt source Code
   63       'INVENTORY',                                  --Destination Type Code
   64       'DELIVER' ,                                    --AUT Transact Code
   65       'INVENTORY',                                  --Source Document Code
   66        msi.primary_uom_code ,                       --Unit Of Measure
   67        msi.inventory_item_id,                        --Item ID
   68        msi.primary_unit_of_measure,                  --UOM COde
   69        fnd.user_id,
   70        V_A,                                         --Shipment Header ID
   71        V_B,                                         --SHipment Line ID
   72        82,                                           --To Organization ID
   73        'Brooklyn',                                     --Sub Inventory ID
   74        81,                                            --From Organization
   75        'Vessel'                                       --From Subinventory
   76
   77    FROM
   78       regal.regal_inv_landed_cost_tab lc,
   79       fnd_user fnd,
   80       mtl_system_items msi
   81
   82    WHERE
   83       lc.organization_id = msi.organization_id
   84       AND  lc.inventory_item_id = msi.inventory_item_id
   85       AND  lc.created_by = fnd.created_by;
   86
   87  commit;
   88  v_message := SQL%ROWCOUNT;
   89  dbms_output.put_line('v_message');
   90  END;
   91  /
  v_message
  
  PL/SQL procedure successfully completed.
  SQL> select * from rcv_transactions_interface;
  
  no rows selected

  Thanks in advance!

  There is no problem with inserting data!
  Only there is no data! This means that your select statement retrieves no rows.
  You can see the output of your program (0). This means that there where no line in the result set.

  Please check the output of your tax return independently:

  SELECT
  --        regal.regal_inv_landed_cost_seq.nextval,      --Interface_transaction_id
   --       V_A,                                          --Header Interface ID
  --        V_B,                                          --Group ID
          'Ship',                                       --Transaction Type
          sysdate,                                      --Transaction Date
          'PENDING',                                    --Processing Status Code
          'BATCH',                                      --Processing Mode Code
          'PENDING',                                    --Transaction Status Code
          lc.quantity_received,                          --Quantity
          lc.last_update_date,                          --last update date
          lc.last_updated_by,                           --last updated by
          sysdate,                                      --creation date
          lc.created_by,                                --created by
          'INVENTORY',                                  --Receipt source Code
          'INVENTORY',                                  --Destination Type Code
          'DELIVER' ,                                    --AUT Transact Code
          'INVENTORY',                                  --Source Document Code
           msi.primary_uom_code ,                       --Unit Of Measure
           msi.inventory_item_id,                        --Item ID
           msi.primary_unit_of_measure,                  --UOM COde
           fnd.user_id,
    --       V_A,                                         --Shipment Header ID
  --         V_B,                                         --SHipment Line ID
           82,                                           --To Organization ID
           'Brooklyn',                                     --Sub Inventory ID
           81,                                            --From Organization
           'Vessel'                                       --From Subinventory
       FROM
          regal.regal_inv_landed_cost_tab lc,
          fnd_user fnd,
          mtl_system_items msi
       WHERE
          lc.organization_id = msi.organization_id
          AND  lc.inventory_item_id = msi.inventory_item_id
          AND  lc.created_by = fnd.created_by;
  

  Published by: hm on 13.10.2011 23:19

  I removed the references of the sequence and the variables V_A and YaeUb.
  BTW: Why do you want to include V_A and YaeUb in two different columns?

  The use of sequences in your code seems a bit strange to me. But this has nothing to do with your question.

• Inserting data into a table and insert many records into newtable

  Hi all
  
  I have table A and table b.
  Suppose that if I insert the data into the table, this table is inserted, the number of records records Count I want to insert in the table B
  
  I have to write a procedure for this cannot so any help on this.
  
  
  Thanks in advance.
  
  
  Sikora.

  Hello

  You can use this anonymous block and extend it to create the procedure. You can delete loop or leave it there and use the cursor loop

  DECLARE
     j   NUMBER;
  BEGIN
     FOR i IN 1 .. 100
     LOOP
        INSERT INTO A
        VALUES ('col1', 'col2', 'col3');
  
        j   := j+ sql%ROWCOUNT;
     END LOOP;
  
     INSERT INTO B   VALUES ('table name ', j);
  
     COMMIT;
  EXCEPTION
     WHEN OTHERS
     THEN
        ROLLBACK;
        DBMS_OUTPUT.put_line (SUBSTR (SQLERRM, 1, 200));
        RAISE;
  END;
  

  Published by: OrionNet on January 21, 2009 12:53 AM

• inserting data into a table from another table

  Hello

  I have a to insert a data in the other table.

  My requirement is I field Date_effect_date in the departments, I would copy the details field in dept_effect_date of employees.

  I used the query

  Insert in the dept_effect_date of certain employees (dept_effect_date) departments;

  and the result is:

  SQL error: ORA-01400: cannot insert NULL into ('HR'. "'"' EMPLOYEES'."" EMPLOYEE_ID')

  01400 00000 - "impossible to insert a NULL value in (%s)."

  MY DB: oracle 10g XE

  Sainaba

  You can do this by UPDATE not INSERT.

  Sudheeryekkala wrote:

  Hello

  I have a to insert a data in the other table.

  My requirement is I field Date_effect_date in the departments, I would copy the details field in dept_effect_date of employees.

  I used the query

  Insert in the dept_effect_date of certain employees (dept_effect_date) departments;

  and the result is:

  SQL error: ORA-01400: cannot insert NULL into ('HR'. "'"' EMPLOYEES'."" EMPLOYEE_ID')

  01400 00000 - "impossible to insert a NULL value in (%s)."

  MY DB: oracle 10g XE

  Sainaba

  INSERT the results of will by adding new lines to the table so you have the above error. In your case, you must update the value of the existing column

  (or, if the volume is large, then fill the data -

  join the table two in a new table CREATE TABLE EMP_NEW AS SELECT * FROM EMPLOYEES, DEPARTMENTS .

  fall of ;

  Rename emp_new to ;

  * constraints/indexes if necessary be supported...

  )

  E employees update

  Set e.dept_effect_date = (select d.dept_effect_date

  departments d

  where e.dept_id = d.dept_id);

  Concerning

  Biju

• Insert data from one table to another

  I have two tables SALES_MASTER and SALESMAN_MASTER which is described below.
  
  SQL > desc SALES_MASTER;
  Name Null? Type
  ----------------------------------------- -------- ----------------------------
  NO VARCHAR2 (6)
  NAME VARCHAR2 (20)
  PIN NUMBER (8)
  CITY VARCHAR2 (20)
  VARCHAR2 (20) STATE
  
  
  
  SQL > desc SALESMAN_MASTER;
  Name Null? Type
  ----------------------------------------- -------- -----------------------
  SALESMANNO VARCHAR2 (6)
  SALESMANNAME VARCHAR2 (20)
  ADDRESS1 VARCHAR2 (30)
  ADDRESS2 VARCHAR2 (30)
  CITY VARCHAR2 (20)
  PIN NUMBER (8)
  VARCHAR2 (20) STATE
  SALAMT NUMBER (8.2)
  TGTTOGET NUMBER (6.2)
  YTDSALES NUMBER (6.2)
  REMARKS VARCHAR2 (60)
  
  I want to insert data from SALESMAN_MASTER (2nnd table) to SALES_MASTER(first table). I want to insert only two columns NO, NAME and PIN code. All of these columns are compatible. I tried this command. But it's not working. Help me.
  
  SQL > insert into SALES_MASTER
  2 (NO., NAME, PIN CODE)
  3 values
  4. Select SALESMANNO, SALESMANNAME, PIN code
  5 SALESMAN_MASTER;
  Select SALESMANNO, SALESMANNAME, PIN code
  *
  ERROR on line 4:
  ORA-00936: lack of expression

  INSERT INTO SALES_MASTER
     ( NO
     , Name
     , PINCODE )
     SELECT SALESMANNO
          , SALESMANNAME
          , PINCODE
       FROM SALESMAN_MASTER;
  

  Kind regards
  Christian Balz

• Simple procedure to insert data into a table

  Hello

  I am trying to create a simple procedure to insert the data into the emp table.

  He throws after WARNING:

  The procedure that is created with compilation errors.

  CREATE or REPLACE procedure ins_emp (empno emp.empno%type,ename emp.ename%type,deptno emp.deptno%type)

  IS

  Emp.empno%type,P_ename emp.ename%type,P_deptno emp.deptno%type P_empno;

  BEGIN

  Insert into emp values (empno, ename, deptno);

  Ins_emp END;

  And when I try to run it

  execute ins_emp(1111,'abcd',20);

  He is to launch another error:

  PLSQL - 00905:OBJECT SCOTT. INS_EMP is not valid.

  can someone help me with this procedure?

  Thank you

  Hi Frank,.

  I thank very you much for your comments.

  I have a question:

  unless the procedure or function created with compilation errors, we cannot run them right.

• inserting data into the table

  Hi all
  I use forms [32 bit] Version 6.0.8.24.1 (Production)
  Oracle Database 10g Release 10.2.0.1.0 - Production
  I have settings such as the (optional) emp_code and the year (mandatory field - four digits).
  Based on the setting that I have to get the detail of a table and these must be inserted at the other table with columns of additions (to hardcode the additional columns).
  To achieve this, I intend to get a cursor by selecting the required fields in the table by the way the where clause of the cursor parameters.
  by making a loop through the cursor I will insert the records in the other table.
  Here, the thing is that the data is going to be huge (since the year is the parameter).
  so my approach causes the performance issue.
  I heard that there is a different method of insetions
  can anyone suggest me the best way (performance wise) other than what I mentioned (if you are aware of)...
  
  Thank you...

  user13329002 wrote:
  Thanks for everyone.
  I have to take the data from the table as e_name, e_code, of the table and insert it into another table with some other values such as
  e_name, e_code, as well as I add 'n', 'o'.
  its something like

  insert into e_emp(emp_name,emp_code,emp_add,emp_status,emp_type)
  select e_name,e_code,e_add,'O','N')
  from e_table
  where e_date = Parameter.
  

  in other words, the values for Emp_status, emp_type I have no values in the e_table.so table and enter in e_table I have to hard code it.
  CAL I hard code as I mentioned in my statement example

  can someone clear me of the foregoing.

  Thank you...

  Published by: user13329002 on February 15, 2011 20:11

  Yes... You can hardcode the values for Emp_status, emp_type.

  SQL> CREATE TABLE e_emp(emp_code NUMBER(10),emp_status VARCHAR2(1),emp_type VARCHAR2(1));
  
  Table created.
  
  SQL> create table e_table as (select * from e_emp);
  
  Table created.
  
  SQL> INSERT INTO e_table(emp_code) VALUES('1111');
  
  1 row created.
  
  SQL> insert into e_table(emp_code) values('2222');
  
  1 row created.
  
  SQL> select * from e_table;
  
    EMP_CODE E E
  ---------- - -
        1111
        2222
  
  SQL> insert into e_emp(emp_code,emp_status,emp_type) (select emp_code,'0','N' from e_table);
  
  2 rows created.
  
  SQL> select * from e_emp;
  
    EMP_CODE E E
  ---------- - -
        1111 0 N
        2222 0 N
  
  SQL> 
  

  I hope this helps.

  Kind regards
  Claudy

• Read the BLOB and insert data into a table

  Hi all

  Let us examine below on Oracle DB 12 c:

  create table xx_test3 (c blob);
  
  insert into xx_test3 (c) values (utl_raw.cast_to_raw(
  'azertyuiop,qsdfghjklm,wxcvbn'));
  
  
  create table xx_target (col1 varchar2(50));
  
  
  
  

  Can someone guide me how to read the data and insert it into the xx_target table?

  Necessary result is:

  
  select * from xx_target;
  
  
  COL1                                              
  
  --------------------------------------------------
  azertyuiop                                        
  qsdfghjklm                                        
  wxcvbn                                            
  
  3 rows selected.
  
  
  
  
  

  Thanks in advance,

  Stoyanov.

  insert into xx_target (col1)

  with the data as)

  Select utl_raw.cast_to_varchar2 (dbms_lob.substr (c, 32000, 1)) CBC

  of xx_test3

  )

  Select regexp_substr (CBC, ' [^,] +', 1, level)

  from the data

  connect by level<= regexp_count(src,="" ',')="" +="">

• Insert data into the table particular

  Hello
  
  I have a requirement to insert data from table from Oracle 10 g to Oracle 9i table.
  The pom_code table should be filled with gr_product table based on a specific schema of codes - i.e. If POM Code corresponds to a specific model, then it must belong to a specific company.
  

  FROM :: Oracle 10g database
  
  gr_product
  pr_code varchar2(20 byte)
  pr_desc varchar2(80 byte)

  To :: Oracle 9i database
  
  pom_code
  code      varchar2(12 byte)
  desc      varchar2(100 byte)
  companyid Number

  1. All gr_product.pr_code with following pattern should go to pom_code.code and companyid =10
  
  a. <one digit><.><two digit><alphabet> ex code:  1.01A
  b. <one digit><.><two digit><alphabet><space><two alphabet> ex code: 1.01B ZF  
  
  2. All gr_product.pr_code with following pattern should go to pom_code.code and companyid =20
  a. <two digit><.><one digit><alphabet> ex code: 10.1A         
  b. <two digit><.><one digit><alphabet><space><two alphabet> ex code: 10.5A HR    
  
  3. All gr_product.pr_code with following pattern should go to pom_code.code and companyid =30
  a. <alphabet><.><two digit><alphabet>  ex code: B.42A
  b. <alphabet><.><two digit><alphabet><space><two alphabet> ex code: N.10B AT 

  Thank you
  Sandy

  Hello

  The CASE expression I posted earlier does what you want?
  If so, please mark the thread as "answered".
  If this isn't the case, after a complete script that people can run to recreate the problem and test their ideas. Includes TABLE of CASH and INSERT statements for some examples of data for all the tables, the results you want from these sample data and your request (or INSERT statement) using the CASE expression. Report where the code you posted does not have what you need and explain how to get good results in these places.

• Insert data into the table from the flat Flie

  I have a flat file save in a directory on my server. I would like to read the data from the flat file and insert into a table on the stage. The flat file data as below
  01-02-03-04-05-06-07-08-09-10
  Suppose that Location_stage is my table and c1 is the column name.
  
  The data should be saved as follows
  
  
  Select * from location_stage
  
  C1
  ----
  01
  02
  03
  04
  05
  
  Any help will be appreciated.
  
  Thank you
  NS

  You can define an external table to read data from the file and a simple view to convert the string enclosed in columns:

  SQL> create directory ext_data as 'c:\';
  
  Directory created.
  
  SQL> create table ext_locations (
    2  loc varchar2(4000)
    3  )
    4  organization external
    5  (
    6  type oracle_loader
    7  default directory ext_data
    8  access parameters (
    9  records delimited by newline
   10  logfile ext_data:'ext_loc.log'
   11  fields terminated by ',' (loc)
   12  )
   13  location ('locations.txt')
   14  );
  
  Table created.
  
  SQL> select * from ext_locations;
  
  LOC
  -----------------------------------------------
  01-02-03-04-05-06-07-08-09-10
  
  SQL> create view location_stage as
    2  select regexp_substr(loc,'[^-]+',1,level) c1
    3  from ext_locations
    4  connect by level <= length(loc)-length(replace(loc,'-',''))+1;
  
  View created.
  
  SQL> select * from location_stage;
  
  C1
  ----------------------------------------------------------------------------
  01
  02
  03
  04
  05
  06
  07
  08
  09
  10
  
  10 rows selected.
  

  Your data is stored only in the file...

  Max

• Inserting data from one table to another table

  Hello
  
  I have the following SQL where I am updating a table by adding new data from another table, but without success.
  
  INSERT INTO
  () TOP_PROSPECTS
  COMMON_ID
  DATE_ADDED
  REVIEW_RANK
  EVAL_DATE
  PM_ASSIGN
  WHY_NOTES)
  SELECT
  t.COMMON_ID
  t.DATE_ADDED
  t.REVIEW_RANK
  t.EVAL_DATE
  t.PM_ASSIGN
  t.WHY_NOTES
  Of
  TEMP_IVAN_MARY t
  WHERE
  COMMON_ID <>t.COMMON_ID
  
  Any suggestions?
  
  Thank you.
  
  Published by: user13822709 on August 14, 2012 09:14
  
  Published by: user13822709 on August 14, 2012 09:15

  Is that what you're trying to do with the insert. I think there may be a sign {noformat}<{noformat}{noformat}>{noformat} missing in the where clause. This site eat those, so you need to use the equivalent! = post here.

  If I'm wrong about the missing trader, then it looks like you want to insert rows in temp_ivan_mary that are not already in top_prospects. If Yes, then you need something like:

  insert into top_prospects
     (common_id, date_added, review_rank, eval_date, pm_assign,
      why_notes)
  select t.common_id, t.date_added, t.review_rank, t.eval_date,
         t.pm_assign, t.why_notes
  from temp_ivan_mary t
  where t.common_id not in (select common_id from top_prospects
                            where common_id is not null)
  

  Function index and data available volumnes etc. then a mergr can be more effective. Something like:

  merge into top_prospects p
     using (select common_id, date_added, review_rank, eval_date,
                   pm_assign, why_notes
            from temp_ivan_mary) t
     on (p.common_id = t.common_id)
     when not matched then
        insert (common_id, date_added, review_rank, eval_date, pm_assign,
                why_notes)
        values (t.common_id, t.date_added, t.review_rank, t.eval_date,
                t.pm_assign, t.why_notes)
  from temp_ivan_mary t
  

  John