VI data on average compared to the data from the Excel file on average .lvm

Similar Questions

• How to get data from an Excel file exist using report generation tools

  I try to use the Excel vi get the data of the report generation tool, but I can't understand how to activate a path can be explored in the right type for the VI.  I tried to use the new Report.vi, but this does not work unless you use a template.  It will not open an existing excel file and make an open report to extract data from.

  Essentially, I have a bunch of excel files that have data in them, and I want a VI allows to analyze the data.  I'm going to pull in all the data directly from the excel file so I don't have to reproscess them all in text so I can use the more standard datasheet live but to convert even the excel file programtically in labview I still need to be able to open the excel file and get the data?

  I found my problem.  It turns out that only not to have had a problem with the tool box new report vi.  I had accidentally wired an input control of path of folder instead of an input control of path of file to it.  Changing the file type took care of her and I was able to access excel files, I tried using the new report VI to extract the file, and Excel Get Data to extract the data.

• Reading the data from an Excel file

  Hello

  I try to use the attached VI (adapted from an example provided by someone else in a different thread) to read an Excel file.

  It works well, aside from the fact that it leaves the file and Excel opened when it has finished running.

  How do I close the file (and Excel) by programming?

  Thank you very much

  Dan

  Try this.

• Export data from FFT Excel file spectrum graph in Labview.

  I have a graph FFT espectrum showing frequency and Amplitude. I want to export the values in this chart as an excel file.

  Could someone help me please.

  You have MS Excel installed on your computer? Or tiara? These options are disabled if you have not installed appropriate software.

  Thank you

  AREV

  CTO | RAFA solutions

  

• labView send data wireless node for the excel file

  Hi all

  I used the basic tutorial for the network of wireless sensors OR. http://www.ni.com/tutorial/8890/en/. I finished it with a single node. The next phase of my project is to send the data from the node and the date and time in an excel file every hour. Is there any advice I can get to at least send the date and the data in the excel file? I'm using labView in 2012

  I change, because I put the text instead of excel file

  You cannot connect a scalar to the entry level that is needed. A solution would be to insert a table to build before the writing on the worksheet.

• Save the data to the excel file

  Hello

  I make a program reads the value of the probe via serial port... but I don't know how I can record this data in excel file... I open the example in the labview example, but I don't want to like this... becaue I use a while loop in my program that cause opened "multi" excel file... . How can I solve this problem?

  You need to think about what you want to do, not how you want to do.  I'll make a few assumptions here - adopt to your notebook loads "real."

  I guess you want to take a series of readings from a device (sensor, serial port).  I suppose you take multiple readings, perhaps their display on a table or chart, for a certain period of time.  Once you have a set of data, you want to save all the data in an Excel file.

  If this scenario is correct, there are three distinct phases to this task - implemented the data collection (open the serial port, manage the interactions of the user according to the needs), data collection (and potentially produce tables or graphs) and save the data.  Note that only step 2, collect data, involves a repetitive action appropriate for a while loop.  Once you have all the data, you can then open an Excel report, use something like Excel table easy to put the Table in the report or chart Excel easy to put a chart in the report and save the report in evidence, save the report.

  If you are using a relatively recent version of LabVIEW (2010 or later), the new generation Excel report screws are pretty easy to use.

• Load the data from a text file into a table using pl/sql

  Hi Experts,
  
  I want to load the data from a text file (sample1.txt) to a table using pl/sql
  
  I used the pl/sql code below
  
  ***********************************
  declare
  f utl_file.file_type;
  s varchar2 (200);
  c number: = 0;
  Start
  f: = utl_file.fopen('TRY','sample1.txt','R');
  loop
  UTL_FILE.get_line (f, s);
  insert into sampletable (a, b, c) values (s, s, s);
  c: = c + 1;
  end loop;
  exception
  When NO_DATA_FOUND then
  UTL_FILE.fclose (f);
  dbms_output.put_line('No. deles de lignes insérées: ' || c);
  end;
  
  ***************************************
  
  and my sample1.txt file looks like
  
  ***************************************
  1
  2
  3
  ***************************************
  
  Gets the data inserted, with way below
  
  Select * from sampletable;
  
  A, B AND C
  
  1-1-1
  2-2-2
  3 3 3
  
  I want that data to get inserted as
  
  A, B AND C
  
  1 2 3
  
  The text file I have is to have three lines, and the first value of each line should go to each column
  
  Help, please...
  
  Thank you

  declare
  f utl_file.file_type;
  s1 varchar2(200);
  s2 varchar2(200);
  s3 varchar2(200);
  c number := 0;
  begin
  f := utl_file.fopen('TRY','sample1.txt','R');
  utl_file.get_line(f,s1);
  utl_file.get_line(f,s2);
  utl_file.get_line(f,s3);
  insert into sampletable (a,b,c) values (s1,s2,s3);
  c := c + 1;
  utl_file.fclose(f);
  exception
  when NO_DATA_FOUND then
  if utl_file.is_open(f) then utl_file.fclose(f); ens if;
  dbms_output.put_line('No. of rows inserted : ' || c);
  end;
  

  SY.

• can export us all the data in the Excel file format table in oracle?

  Hello
  
  Is it possible to export all the data in the table to the excel file format?
  
  Thank you

  Hi Mohammed_82!

  Oracle itself has no tools to export in csv or excel format. You have to search third-party tools such as Toad or the Torah.

  concerning

• How to ignore the details of footer when loading data from a .txt file

  Hello experts,
  
  I import data from a txt file in my database. I jumped my header using SKIP information, but how can I ignore my footer details.
  Thank you

  Answer on your other thread:

  Txt for a required format file processing

• Recover data from MS excel

  Hi all

  I have a simple question... How can I get data from an Excel... I have MS excel file (*.xls) I just want to get the data that is in this file in labview?

  I go through the tutorial http://zone.ni.com/devzone/cda/tut/p/id/3181#toc0 but it seems that the only way to get excellent data in labview is to have the report generation tool...

  or is it possible else that bypassing the Toolbox I can read data from excel?

  concerning

  see this example

• Extract data from an xml file takes almost an hour to 2.5 M data.

  Hello
  
  Any help would be much appreciated. Extract data from an xml file takes almost an hour to 2.5 M. data is there a solution to this.
  
  WITH t AS
  (SELECT XMLTYPE (response) pass FROM dual
  )
  SELECT
  b.entity_id,
  c.INSTANCE_ID,
  d.attribute_id,
  d.DATA_TYPE,
  d.ATTRIBUTE_VALUE,
  d.outcome_style
  T,.
  XMLTABLE (XMLNamespaces ("http://schemas.xmlsoap.org/soap/envelope/" AS "SOAP-ENV"
  'http://oracle.com/determinations/server/10.3/rulebase/assess/types' AS 'type')
  , ' SOAP - ENV:Envelope / SOAP - ENV:Body / typ: assess-response/typ: global instance / typ:entity'
  PASSAGE t.col
  Path of COLUMNS entity_id VARCHAR2 (256) "@id".
  path XMLTYPE res_tmp2 'typ:instance') b
  xmltable (XMLNamespaces ("http://schemas.xmlsoap.org/soap/envelope/" AS "SOAP-ENV"
  'http://oracle.com/determinations/server/10.3/rulebase/assess/types' AS 'type')
  , "typ:instance".
  PASSAGE b.res_tmp2
  Path of COLUMNS instance_id VARCHAR2 (256) "@id".
  path XMLTYPE res_tmp3 'typ:attribute') c
  xmltable (XMLNamespaces ("http://schemas.xmlsoap.org/soap/envelope/" AS "SOAP-ENV"
  'http://oracle.com/determinations/server/10.3/rulebase/assess/types' AS 'type')
  , "typ:attribute".
  PASSAGE c.res_tmp3
  Path of VARCHAR2 (256) COLUMNS attribute_id '@id '.
  , data_type VARCHAR2 (256) path '@type '.
  , attribute_value VARCHAR2 (256) path '.'
  path VARCHAR2 (256) outcome_style '@inferred') d;
  
  Thank you
  Mhand

  OK, in this case the best option is to store the answer in a binary table of XMLType (may be a temporary table if you want to) and run the query from there:

  CREATE TABLE tmp_xml OF XMLType
  XMLType STORE AS SECUREFILE BINARY XML -- default storage in your version
  ;
  

  INSERT INTO tmp_xml VALUES(XMLType(response));
  

  SELECT b.entity_id,
         c.instance_id,
         d.attribute_id,
         d.data_type,
         d.attribute_value,
         d.outcome_style
  FROM tmp_xml t,
       XMLTABLE(
         XMLNamespaces('http://schemas.xmlsoap.org/soap/envelope/' AS "SOAP-ENV"
                      , 'http://oracle.com/determinations/server/10.3/rulebase/assess/types' AS "typ")
       , 'SOAP-ENV:Envelope/SOAP-ENV:Body/typ:assess-response/typ:global-instance/typ:entity'
         PASSING t.object_value
         COLUMNS
  ...
  

• When I use the function "cut", the line of results more sharpness compared to the original files. For example, {A: "file.psd"-> cultures 4x6inch, 300 dpi-> B: "cropped file.psd} then the results are as described as a first step. What s the problem.

  When I use the function "cut", the line of results more sharpness compared to the original files. For example, {A: "file.psd"-> cultures 4x6inch, 300 dpi-> B: "cropped file.psd} then the results are as described as a first step. What s the problem. (Photoshop CC, windows7)

  I'm a Retoucher of photpfile have used the CS2 version for many years, and fuction 'Harvest' is an important and frequent tree tools myself. The result of the broke lines drive me annoying cause my feeling touch Sofete are all blown away. Please help me.

  I think you're talking about using the crop tool? If you're cropping with a size and resolution that involves interpolation of the image, the crop tool will use your preference for the Interpolation of the Image. By default, bicubic is automatic, which can easily result in a sharp file. Change your preference (in general) to bicubic and you shouldn't see any sharpening.

  I hope it works for your situation.

• Download and open the Excel files on iPad Pro

  I have the new iPad Pro.  I have Office 365 is installed.  In my work, I run queries of data on a server and the query result comes to me in Excel.  I want to download the Excel file and open it for editing on my iPad Pro.  What I have actually / to accomplish this task?

  You should be able to do this by using numbers

  

  https://www.Apple.com/ca/support/iWork-for-icloud/numbers/

• Entries are concatenated in the same column in the excel file

  Hi, I really need help in this emergency. The problem is when I open the spreadsheet file after you run the program below, all the values that I believe are concatenated in the same column. However, there are 2 different analog inputs which I want in 2 different columns. I'm getting the 2 waveforms in the same graph, but when I open the excel file, it seems that the entries are concatenated in the same column. Someone knows how to fix this? Thank you very much.

  

  Hi Ben 64,.

  Thanks a lot again. I did as you said and I removed the dynamic data and logged files added directly to the results. I'm still checking if the program works as I can branch only when I return to work tomorrow. Tell me if you think it might be able to work this time. Thanks a lot again!

• Create rectangles of information in the excel file... Help!

  I need help and have NO idea of what I'm doing. I have an excel file with thousands of lines, each with a column for the coordinate x, y-suface, the height and width of a rectangle. I need a script that will ask me to select the excel file, read the excel file and create rectangles of each of thousands of lines. I guess it would be simple enough for someone who knows what they're doing, but I have no idea where to start. I work in a windows environment and I have Illustrator CS4. Any suggestions? All scripts out there that could give me a start?

  you go, it's VBA code, I prefer to use it when I need to have Excel speak to Illustrator directly without exporting the data in Excel.

  to set up...

  -Open Excel

  -Press on Alt + F11 to bring up the editor

  -in the Tools menu, click references.

  -Add a reference to 'Adobe Illustrator CS5 type library' (or CS4 or your version)

  -in the perso.xls (or any other book) to add a Module. Personal is a comprehensive workbook that is always available. If you don't see it, go back to Excel and save a macro, anything will do. Who will create the personal folder.

  -type the following in this module

  Sub makeSquares()
      'carlos canto // 6/26/13
      'reads the active Excel workbook data to create squares in Illustrator
      'data is organized in rows as follows x, y, width, height
      'data has no headers, first row in cell "A1"
  
      Dim iapp As New Illustrator.Application
      Dim idoc As Illustrator.Document
      Dim isquare As Illustrator.PathItem
  
      Dim rowcount As Integer
      Dim x As Double
      Dim y As Double
      Dim w As Double
      Dim h As Double
  
      rowcount = Cells(1, 1).CurrentRegion.Rows.Count
  
      Set idoc = iapp.Documents.Add
  
      For i = 1 To rowcount
          x = Cells(i, 1)
          y = Cells(i, 2)
          w = Cells(i, 3)
          h = Cells(i, 4)
  
          Set isquare = idoc.PathItems.Rectangle(y, x, w, h)
      Next
  
      Set isquare = Nothing
      Set idoc = Nothing
      Set iapp = Nothing
  End Sub
  

  -Save the personal book

  -to run, move the cursor anywhere inside the slot... End Sub and press F5

  For simplicity, launch illustrator before running the script

• Report and read the Excel file

  Hi all

  I need to match the styles of paragraphs with Indesign and files the Excel file.

  Excel file consists of (approximately 500 paragraph Styles) naming of the files of standard paragraph styles

  Files InDesign with 100 paragraph Styles.

  My request:

  I need to generate the report if Indesign paragraph styles that are not in the Excel file.

  for example,.

  Indesign file Excel file

  h1                             H1

  h2                              h2

  h3                              BL

  tx                              tx1

  TX1

  TX2

  Create the report as:

  Paragraph error style is H1 and BL in Indesign file

  Created script:
  

  var myDoc = app.activeDocument;
  
  var myPstyles = app.activeDocument.allParagraphStyles;
  
  alert("myPstyles: " + myPstyles.length)
  
  for(i=0; i<myPstyles.length; i++)
  {
       var IndesignPStyles = myPstyles[i].name;
      alert(myPstyles[i].name)
      }
  //_____________________________________________________________
  
  //Help Here
  
  var myFile = File.openDialog("Choose a tab delimitted txt file:");
  if (!myFile){
  exit();
  }     
   
  myFile.open('r');
  while (myFile.eof==false){
       line=myFile.readln();
       line = line.split("\t");
       myFind = line[0];
  }
  
  
  

  Could someone help with this request.

  Thanks in advance

  Beginner_X

  Hi BEGINNER_X,

  First of all, you must convert the excel file to the format of files "*.csv or delimited by tabs. (I use commas .csv file).

  You posted in above code JS reading only the names of paragraph style. Then another code is read only comma-delimited text file, but you are not comparing the paragraph style in the list of excel files. You missed here.

  Please try the JS code below his works very well, but not generated the report file. I hope that you will generate the report of your side file.

  var myFile = File.openDialog("Choose a tab delimitted txt file:");
  if (!myFile){
  exit();
  }     
  
  var myArray = []
  myFile.open('r');
  while (myFile.eof==false){
      var line=myFile.readln().split(",");
      myArray.push(line[0]);
      }
  
  var myDoc = app.activeDocument;
  var myPstyles = app.activeDocument.allParagraphStyles;
  
  Array.prototype.contains = function(obj) {
      var i = this.length;
      while (i--) {
          if (this[i] === obj) {
              return true;
          }
      }
      return false;
  }
  
  var myMissingStyle =[];
  for(i=2; i
  THX,
  csm_phil