Insertion of Word documents

Similar Questions

• HP Officejet Pro 8610: hp 8610 not printing images inserted into the word document

  I tried everything I know to do.  I have a word document that I inserted a photo in and it keeps cutting off my photos.  This is also when I insert a clip art image.  I downloaded new drivers and everything.  I do not lose any information on my file with the exception of the part of the image to the break.  I tried to resize and crop the image.  That did not help either.

  @ljpereira44

  Ok.. A few more ideas...

  Follow him requires a recent Version of Windows - newer than XP - and you run at least Office Word 2007.

  ==================================================

  WordPad

  Copy the document in WordPad, to print the file and verify the results

  --------------------------------------------------------------------------------------

  Replace Images

  Open the Word document > right click on one of the Images > edit image > >

  Change the picture to the Image even where it is stored on your computer / Cloud

  --------------------------------------------------------------------------------------

  Save / print to PDF

  • If you did not, update your Adobe Reader Abobe Reader DC
  • Save the Word document in PDF format
  • Print the PDF file saved as "Real" / "Shrink to fit", check the results of each

• How to create a document and insert the words and/or art on both sides of the page

  How to create a document and insert the words and/or art on both sides of the page

  How to create a document and insert the words and/or art on both sides of the page

  You create a document by using an application of word processor like Microsoft Word or Corel WordPerfect or OpenOffice Writer.  Think of it as a broad a page roll.

  When you print the document, you can print all pages of the document on one sheet of paper (the normal default value), or you can print on both sides of a sheet of paper.

  Some printers are capable of automatic double-sided printing.  With others, you print all the odd pages and then take the stack of paper, turn upside down and put it back into the printer to print all pages.  You need either to read your printer manual, or experiment a bit to determine if you need to re - organize the first last pages before printing the second side.

• Conversion of a Word Document of 2010 with objects inserted in PDF with adobe acrobat XI

  Hello

  I work in a Wrod document with objects inserted such as ppt, word documents and PDFs even. you open the word document, press down on the object and the inserted file opens. I converted to pdf format, click on a button and the index, that is to say, you press on the index and you switch to the selected section. However, the inserted objects are images and you can not open the.

  Do you know how to keep the inserted objects?

  Thank you

  Sure that the PDF file contains exactly what you would get if you printed the Word document. There are no promise or expectation that opposes will be "live".

• You can INSERT a word/RTF document in a rich text editor?

  ++You can insert a word/RTF document in a rich text editor?  SoS++
  
  Reading RTF file or JAVA?
  
  Help me?
  
  
  Regars N.Nini
  
  Published by: N.Nini on July 5, 2011 12:36 AM
  
  Published by: N.Nini on July 5, 2011 18:36
  
  Published by: Ninja on July 6, 2011 01:22
  
  Published by: Ninja on July 6, 2011 01:23
  
  Published by: Ninja on July 6, 2011 01:24

  GI,

  the RichText editor only supports HTML content, no binaries. You can use the tag of file upload and download the document, parsed on the server or directly save far as an attachment if

  Frank

• Insertion of PDF files into word documents

  Since download Adobe X I couldn't insert a PDF document into a word (using Office 2007 and Office 2010) document.  I get the following error message:

  "The program used to create this object is AcroExch.  This program is either not installed on your computer, or it does not.  The change this object install AcroExch or ensure that any dialogs in AcroExch are closed.

  As this was a feature I used without any problem before downloading Adobe X I can only assume that it's to do with the download.

  Any ideas please?

  Maybe a problem of protection of Adobe Reader X mode.

• Eny HP 4520: Printing problems in word Document with photo

  I just purcahsed a HP Envy and I use the function print via the wireless option. I have a word document that I was able to print in the past which has an image inserted into the document. All in the words fine printing copies only the upper left photo f. When I show preview before printing, it shows that if the whole of the document will print correctly and the image should print very well... I have attached what print preview looks like and what actually prints

  Hi @dmanyeah,

  Thank you for reaching out to the forums! I understand that you encounter printing problems in Word, the full image is not printing. Thanks for providing the screenshots. I'd love to help you.

  Try to print a picture from another application to see if you have the same problem.

  To exclude the driver, install a generic driver to see if you have the same results.

  • On the computer, go to start, devices and printers, right-click on your printer and select printer properties.
  • Click the Advanced tab and click new driver, and then click Next.
  • HP Deskjet 9800 by selecting in the list or the Deskjet 990c printer, click Next, Finish, and apply the settings. (you can always go back and revert to the original printer driver)

  What version of Word are you using?

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• Unable to scan to a Word document open... (not in a file) I have on my old HP but not on this one.

  Photosmart HP 6515

  using Windows XP

  1. cannot find a way to "reframe" a scanned sheet when I really want on a portion of the worksheet.  On my old HP, it was an option to lighten, Darken, crop, etc.  There are no options to set the scan I see on this one.

  2. unable to find a way to scan directly to an open Word Document.  The only options I see are in a file or email.  Most of my scanner is a file open (still unnamed).  My old HP Photosmart, there was a framework for the analysis of the Document.

  3. still unable to find a place to enter 'user-defined sizes.  I use several sizes of stationery not one of the displayed formats.  On my old HP if you want a size don't figure does not, you can configure a "custom size."

  On HP 6515 documentation, he said of 3.5 to 11 "sizes ("such as Custom"size) but it does not work.

  If someone can tell me what HP printer (for home) has the features (like my other 2 HP printers) I'll really appreciate it.  Some models say the custom calibration is available for Mac only.  I've never had a Mac... goal had w / these features of HP printers.  Can't imagine why the new models would have FEWER features.

  Someone has already tried to install and former pilot a 6510 and 6515.  I read a suggestion that install the old drivers, restores the 3 numbers above to what they were on an older model.

  Part of what happens is that the custom print size feature is no longer available on any printers that use the new firmware.  If you scan using the HP software, you should see options for the harvest and to adjust the lightness and darkness of the analysis.  If you use the HP software and can't find these options, let me know and I'll try to point you to them.  For a scan in an open Word document, you must save the analysis as an image and insert it manually in the document now.  The automatic function for this has been removed as well.  I'm sorry.

  After that I made this post, I was put to aware of this post from Travis_C that give you a work around for custom print sizes.  Hope that helps.

• word documents display boards

  Hello

  What I want to do is:

  1 insert a table into a word document

  2. adjust the width of the column 1 to 2 cm, the width of the 2nd to 6 cm and width of 3 to 3 cm.

  3. insert values in specific cells of the table, not in all cells

  4 formatting the text in cells

  5. Insert a value into the first cell of the table. There is an empty cell on the upper left side if I use lines and columns headers.

  I have

  I managed with 1. I used the microsoft report generation tool, but I could put only a width for all columns.

  All other problems are solved.

  I also did not managed to create the settings of Microsoft.

  I have not found any way to create.

  Hope someone knows about these problems

  Thank you

  Rusja

  Hi rusja,

  The attached VI could work to update a specific cell in a Word document - once you have opened the document and obtained the reference to the table.  To do this you use Active X of the Word interface, so you will need Word installed where this application is running.

  There are a lot of Active X posts on this forum (especially on the closing of the references!) and many re: Word, there are also some links in the attached VI.

  Note: Word exposes its functionality to other applications via Active X, and any language with tools Active X (such as LabVIEW) can use the word.  This means that there is a huge amount of ActiveX/Word experience/help/examples on the web, that applies to your use of the word through LabVIEW.

  Have fun!

  See you soon.

• I can't paste clip art into windows mail. (copied from word document - using IE8) How can I fix?

  I can't paste clip art into windows mail. (do not give me the option.)   I copied the clipart in Word document.  I use IE8, IE9, but unnstalled have in the hope of resolving the problem.   Thank you, Pam

  You cannot copy and paste images (especially the cliparts) of the word.  You need to refer to a disk image.  So use Insert | Picture to insert the image.  The image must also be a format that IE can display, as it is used to show messages in WinMail.

  IE9 is not a problem for that. See here for IE9 questions: www.oehelp.com/OETips.aspx#15

  Steve

• Scanner Epson DX 4200 cannot deliver personalized to the Word document scanning

  I have recently updated from a rather old Dell Windows XP computer to a new model of Zoostorm 7873-1200 with Windows 7.  When I use the Word "Insert" tool to insert a scan of my scanner Epson DX4200, I find that if I select "Custom Scan" the forecast and custom scanning seem to work perfectly and allow me to select the area on the preview scan, but the analysis itself does not appear in the Word document.  However, if I start by selecting "Scan" instead of "Custom Scan", the scanned image of the entire page, including the entire region, I'm not, is transferred successfully to the word.  When I had XP, these two options worked.  How can I get the "Custom Scan" option works on Windows7?

  William Butler

  Hello Niranjan,

  Thank you very much for you encourage them to respond.  I've used the same scanner with Windows XP before and had no problem.  The driver for Windows 7 has been installed since the site Web of Epson.

  Since posting my request custom scanning suddenly said to work on the Windows 7 computer without any additional intervention by me.   It's completely inexplicable that my wife and I as well tried several times without success, before asking for help.  I can only hope that his recovery is permanent.

  Thanks for making me aware of the compatibility mode.  I see that this could be a valuable mechanism.

  Best wishes

  Bill Butler

• on-screen keyboard automatically appears when you edit Word documents on touchscreens - really annoying!

  Hello, I just write my feelings because I really hope that Windows 8 will succeed, but it is disappointing at some point in terms of user experience. I apologize if my word is a bit harsh (since this is a forum for Microsoft), but I hope to see this problem resolved to do. I just get pissed off and frustrated on a simple function that could greatly improve the user experience, but isn't here.

  It's Windows 8 does not pass to laptop mode (i.e. turn off the on-screen keyboard) automatically when it is docked/connected with the keyboard. This totally screw up the initiative of Windows 8 is a flawless, all around solution.

  It is a serious problem for the 8 touch screen windows convertibles. Although I don't know who to blame, Microsoft or OEM. Microsoft being more responsible on the software side, I think that Microsoft should fix this. It is both a problem of Windows 8 and a problem of office or Microsoft even secretly to optimize the software for their own hardware to compete with manufacturers, which I'll explain below. I have a RT Surface and an Asus enrich your life, so I know clearly how Surface has an advantage on its same family competing software wise. These hybrid computers usually have a keyboard dock. When the keyboard dock is connected, the computer must have the ability to automatically disable the screen keyboard on. The usual scenario is when I work with a Word document on my keyboard dock, I use my hand to select text and insert the cursor (which is the thing to do if you have a touch screen). But unfortunately on hybrid OEM, Word appears the keyboard screen on every time I touch the text box, which not only blocks my view but also shifts my text view (taking into account the space for the touch keyboard). But this does not happen on the Surface! Makes you wonder what game is playing on Microsoft's OEM partners. We can say that it is Asus responsibility to add this feature. But shouldn't Microsoft do this universal of the functionality and benefits the entire ecosystem? Especially in this case MS designs software and they can't be cela an advantage over their own material. It is particularly bad experience on OEM hybrids (seen on ThinkPad tablet 2, Samsung ATIV Smart PC, Asus enrich your life,...). I've seen many users complain about this on the Internet with their computer of tactile hybrid of Windows 8 (you can search this forum for similar complaints). The only available for OEM hybrid solution is to disable services touch keyboard and writing, which is stupid and laborious. PowerPoint has also that annoying problem of pop-up auto keypad. I do not understand how Windows 8 will be successful if Microsoft plays this unfair game to its partners. (I hope not, but MS seem to care)

  It is a problem of Windows 8 (except the Surface) because it does not automatically neutralize on whenever screen keyboard that an external keyboard is plugged. If the computer is still in tablet mode, even if it is converted into a laptop, which is laughable, given that Windows 8 is supposed to pass without fault between two modes. The fact that I have to manually stop the service of keyboard on screen (which requires administrative privileges) to switch the mode is particularly annoying.

  It is a problem of office because it is on the Windows desktop, the only way to trigger the screen keyboard on is to touch the icon in the taskbar keyboard, even if you touch the area such as Notepad or address bar in Explorer text editing. This is logical since people will use the mouse and keyboard to work on traditional workstations. However, the only exception is the office, that triggers the keyboard screen on every time you touch a text edit box. Do not ask me to switch the touch mode and mode mouse in the office - no difference. The keyboard is displayed. When you change a word document and need to go through the pain of imagery seen the keyboard popping up every time when you select a word or insert a cursor!

  It is a problem with Microsoft because Microsoft has an advantage over OEMS in the configuration of their software to give the best user experience. But their own material does not respect promises. I am pleased that OEMS have developed options better, but disappointed about how MS software a secrete advantage on their own material (Surface).

  There may be a solution I don't know. I would be very happy if someone can shed some light on me.

  Hello

  This is due to the on-screen keyboard is enabled.

  Close the keyboard on the screen, Tablet PC components box (Windows 7/8) in Windows and the features.

  Go to control panel > accessibility > use the computer without a mouse or
  keyboard > uncheck the on screen keyboard

  > starts when you load Windows by disabling "use on-screen Keyboard.

  > box on the page "Use the computer without a mouse or keyboard" in the

  > Ease of access Center. (Open the Control Panel, click ease of access, click on)

  > Ease of access Center, and then click on the computer without a mouse or
  (> keyboard.)

• Icons PDF into a word document

  Hello

  
  We insert the PDFs to our Word documents as icons.  However, when downloading the document to eSign, the ability to open this icon to see the full PDF is lost.  Is this something we can work around?

  Beth

  Hi bethl64501093 ,

  I wish to inform you that once the document is downloaded in Adobe sign, it is treated as image file. The Word file gets flattened like image and I fear that there is no solution available for this workaround.

  Thank you

  Shivam

• Switching to text in an InDesign file done with text in a Word document?

  Hello
  As I recently started working with InDesign, this question may seem quite silly. I have a finished InDesign file and what I have to do is to replace the text in the InDesign document with the text in a Word document. The text frames must remain in the same places, fonts may be the same, etc., so I just wanted to know how to replace this text in the InDesign document without copy - paste the text in the Word file in each text block. Basically, I have a guide to the user of a device in one language, and I have to insert the translated text that the user guide is in another language. Is it by linking documents?

  Yours faithfully,

  VerySeriousPerson

  It is a way to do it. But you will need to format the new document with paragraph styles.

  1. Open existing document ID
  2. Save as and change the file name (language to translate to?)
  3. Insert the cursor at the beginning of the document
  4. CRLT/SHIFT/END to select all of the text in the document (this is for Windows)
  5. Delete
  6. File/Place the file with the text you want. Make sure that you press SHIFT while placing the file, the text flows to all text frames.
  7. Format the document as you wish

  Second step is very important to keep the original file.

• Links in Word documents does not

  Hi - I use HTML HR, version 8.  I have a topic that uses a Word existing as a content document.  The Word document contains links to other documents. When I have the link to the Word document in HR, the links in the Word document do not work.  When I consult the heading in the generated output (MS HTML Help), there are icons where other documents are placed (these icons indicate the type of document - another Word document, an Excel doc and other).  However, when I click on the icons, no action occurs.

  When I open the Word using Word document, icons appear in Word.  When I click the icon of the other document opens.  In my opinion, that these documents were inserted as objects.

  Is there a way to get these links to function?

  When I create the topic in HR, I use 'create the copy and link '.

  Any help would be appreciated!

  I don't think that this is possible because the link function is not designed to automatically link to other documents just because the first document has links.

  Not sure if it would work if you have linked the two, even if you have kept their relationship of relative path.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge