Inspiron 3520, issues after update

Similar Questions

• Registration in Dell Inspiron 3520 issue

  I have a Dell Inspiron 3520. I want to create a video tutorial, but everytime I try to record using any software, audio is not recorded. I updated the drivers for Cirrus Logic Audio high definition, but the problem is still not resolved. I have Windows 7 Professional 32 - bit operating system. I am not able to understand where the problem lies. If someone could help to solve my problem, I would be very grateful.

  check all your microphones if several are listed. But it seems not mic need to be turned on (by recording in audacity, for example) to see some of the Green volume bar activated

• Start-up and white screen issue after updating to v10.11.5?

  I can't say 100% that my problems are related to the last update, but I thought I'd ask.

  I've updated about 4 or 5 days ago, and although the questions did not begin immediately, they start after the update. It should be noted that I have never had issues like this before.

  Here are some of my questions on my MacBook Pro (17 inch, early 2011), 2.2 GHz Intel Core i7, 8 GB at 1333 MHz DDR3, Intel HD 3000 512 MB graphics card

  1. the monitor will sometimes go haywire and a strange split, screen where the mouse can go to the left side of the screen and reappear on the right side of the screen, because the office is now split into two

  2. computer crashes and the monitor starts flashing to show a blue zigzag striped background

  3 freeze during startup and never restart computer. Occasionally, it will start very well, but the computer locks upwards at some point while using

  4 computer at boot flashing out to a white screen then restart never

  Thanks for any help.

  Now I'm starting to think my problems are related to a single user, sign in. Only 2 people use the computer and my connection seems to be fine. No crashes or anything like that.

  The problems start when my wife logs in to his user account.

  Thought I would mention it.

  Any help/response would be appreciated.

• iPhone 5 netwrok issues after updating ios 9.2.1

  After upgrading to ios 9.2.1 my iphone 5 is not able to register with network airtel cell.

  Hi all

  I am also facing the same issue. My iPhone 5 will not connect to the cellular network AFTER that iOS updated 9.2.1 to level.

  Thank you, Siva

• BSOD issues after update 8.1

  My computer has no problems with Windows 8.0.  After the Windows 8.1 update, the system will BSOD crash leave once all the hours to once every few minutes.  I didn't notice all patterns on the block;. It is not obviously related to the execution of any piece of software. Often, the error message is different from the previous.  Some I've seen include:

  • Structure criticizes Corruption
  • Kernel security check failed
  • Memory management
  • IPF in nonpaged area
  • Unhandled Thread Exception system
  • Attempt to write to Readonly memory

  The research I've done has led to assume that it is a driver issue, but I am not sure. Today, the computer has to reset several times without warning and without displaying any error messages at all.  How can I get to the bottom of what's going on and solve the problem?  Any help would be greatly appreciated. Thank you!

  Thanks for the information.

  Your RAM is faulty and must be replaced.

  Kind regards

  Patrick

• MacBook pro issues after updating to Mac OS siera

  I have problems with the new model MBP retina 15 inch Mid 2015 with Force Touch.

  Even I have the same problem. Prior to Macos Siera update everything worked well. After OS update am unable to run my java applications with netbeans. If I start to run any project in netbeans after a time tomcat server does not start and displays tomcat port XXXX is already in use and could not start.

  As well as the sound noisy fan and macbook pro gets hot on the back side. If I stop NetBeans sound fan stops and the macbook to cool in a few minutes.

  After the closure of the tomcat server netbeans IDE does not stop. If you put localhost:XXXX on browser it shows success of tomcat installation page.

  Help us please if you have an idea to solve this problem.

  Having the same problem also.

  Updated since a Yosemite perfectly work for OS X for this!

  The same phenomenon occurs when you try to start Glassfish and vampire tetra using netbeans. Themselves (Glassfish and Payara), they work perfectly well if started via the terminal. I don't really know where there is discord.

• Card SD & USB issues after update of El Capitan

  Hi all!

  Just updated to Yosemite's El Capitan.  Running iMac (21.5 inch late 2009) - to update of Yosemite point has been completely up to date as well as all software and drivers.  Now problems after the iMac to wake up in the morning with some of the built-in ports.

  1. SD card reader - have to restart so that this works, but only works for an hour or two, it is more readings.

  2 ports USB - external HD holding that nothing else than music files must be disconnected and then reconnected to be recognized and to mount.  Anomaly is that Time Machine on back of the iMac USB continues to function properly and rises when waking from sleep in the morning.

  3-4 ports USB hub plugged back has only 2 operational ports in the morning, must either be disconnected and then reconnected to have all four ports work.  It works sometimes for the rest of the day or only works for one hour UX as well.

  4 keyboard (yes I prefer a cable on BT) takes a minute or two to be recognized after the awakening of fashion 'sleep' in the morning.

  I tried to reboot my machine?  Yes, several times.

  I tried to reset the SMC?  Yes, several times.

  I tried to reset the NVRAM/PRAM memory?  Yes, several times.

  Any suggestions on additional solutions without getting really heavy in the Terminal?  Not really keen to try some of the recommendations Terminal found here on communities, as I do not play with the programming of the OS.

  Thank you!

  Thanks for the nine people who have seen this post.  Unfortunately no one answered, so I 'solved it' of it the only way I knew how.  Rolled back to Yosemite.  I hope that the new Sierra OS will be an improvement on El Capitan.

• HP Probook T3L12UT #ABA G3 450: Audio driver issues after update of Windows 10 anniversary

  After upgrading the operating system Windows (10.0.14393), Conexant driver failed. No device installed. Also in the Device Manager, Intel High Definition Audio is missing a driver. Cannot find a copy (grouped with another driver... video perhaps).

  In any case, fixed the problem of driver Conexant by completely uninstall Conexant Audio ISST and re-install.

  Now, my only problem is that the audio does not turn off to a HD TV plugged into the HDMI port. Video is fine, but no sound. HDMI does not show well in Audio devices.

  Any ideas? HDMI port connected to the Intel High Definition Audio device?

  The device for the device ID Intel HD Audio are:

  INTELAUDIO\FUNC_01 & VEN_8086 & DEV_2809 & SUBSYS_80860101 & REV_1000
  INTELAUDIO\FUNC_01, VEN_8086 & DEV_2809 & SUBSYS_80860101

  Thank you

  Ed ski

  Hello:

  Yes, the Intel HD audio device that needs the Intel graphics driver reinstalled.

  I propose this option to install the driver, because sometimes simply reinstall the graphics driver Intel does not work.

  Download and install this free utility for files.  The file 2nd on the list is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, download and save, but do not run this driver Intel graphics from the support page of your laptop.

  This package provides the Intel video drivers, control panel and display audio driver for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75984.exe

  After you download the file of the graphics driver, right-click on it and select 7 - zip from the list.

  Have 7-Zip extract of: and leave it to decompress the file in the file name (sp75984).

  When this is done, go to Device Manager and click on the Intel HDMI audio device problem requiring the driver.

  Click the driver tab.

  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC, and you should be able to get audio and video from the HDMI connection.

• Qosmio F50 issues after update Bios 1.50

  Hello

  I have updated Bios version 1.50.
  I work with audio software and I noticed the performance issue (about 15%-20% performance reduction!).
  Operational front is also strange.

  Now, I can not turn off the lights or start Media center or something else.

  How can I downgrade the Bios Version 1.30?
  Winphlash doesn't let me do that.

  Help, please!

  Thank you

  May not be the answer you are looking for, but have you tried to do a restore of the software? Remember to back up everything!

• Aspire V3 - 772G wifi issues after update win10

  Hello!

  Unfortunately problems with wifi cell phone after last win10 update, not completely broken but work very unconsistent.

  It's works well at home, although it seems that depending on where you are and what networks that are around you, IE to sometimes work when starting the computer it work, but the menu wifi crashes when you try to change the network, "connecting" forever, and then eventually crashes and the menu are all networks at all. Sometimes at startup it as today he shows not all networks at all without doing anything.

  Info:

  -updated for win8.1--> win 10 home

  -Qualcomm, Atheros AR5BWB222 Wireless Network adapt

  -version of the driver 3.0.2.182

  Update the driver Atheros felt like the natural end to start to check, but even though this model is on the list of the win10 from Acer support, no wireless/atheros driver for windows 10 is available when searching on the dirver for Acer download section. Found nothing also when you search for updates in the Device Manager. I hope and guess win10 is now one year old, the driver is supposed to be beautiful and there's nothing Acer "forgot" to do? Anyone know?

  Have you tried running File Checker Windows system, no problems which are not. The unoffical atheros site - drivers.com claim to have a 'new' pilot win10 for my model, but not really my cup of tea to mess with unoffical drivers, it really shouldn't be necessary.

  After searching the Web, I saw all kinds of variations of symptom of wifi-questions about win10 updates, a bit similar to mine but with very different solutions. Really a mess for the "average user" to know where to start troubleshooting unfortunately.

  Anyone with experience of a similar problem? Have a fine system of win8.1 image to roll back that as a last resort, if I can't sort out, but it would be a shame. :-(

  Thanks for the input!

  No matter when I have a driver like that, problem I open the Device Manager, go to the device and uninstall/remove the drive from the device. Then restart and let the system see the drive automatically.

  With the pilot WiFi which can be more difficult. Can you connect directly to your router for a network connection? (a decent connector 10/100/USB 2.0 is under $12 on Amazon, $15 for a USB 3.0 10/100/1000. )

• Acer Iconia W3 issues after update 8.1

  After 8.1 update, anyone has noticed an improvement in the quality of the screen?

  Also, when the awakening of the W3 mode 'sleep', has anyone noticed a second 3-5 lag?

  One last thing: I have an Intel graphics driver update which refuses to install.  Someone at - it slse knows this?

  Thank you

  (a) no

  (b) some saw a shift, I disable "quick start", contributing to a number of things

  (c) Intel seems to have integrated a number of different '. " 1170' packages of drivers, with a start, you could get "already have the latest version of the driver" and is the only way to change to completely remove (also multiple threads).

• compatibility issue after updating to the latest version of iTunes

  I have windows 7, 64 bit and have had iTunes top for more than a year.  I've just updated to the latest version and now I can't access it.  It is said that there is a compatibility issue.

  I would like to uninstall iTunes, reboot your computer.

  Reinstall again. If you went on an older version, which might be the cause.

  iTunes for Windows Vista or Windows 7: troubleshooting...
  http://support.Apple.com/kb/ts1717

• Strange codec / import issues after update 20141

  Well, I'm bit clueless about a rather odd behavior since the update to 20141.

  Somehow first has problems with multiple codecs that work fine with 2014.0.0 and 0.1

  for example: AAC-Audio in many forms.

  
  

  Audio

  ID                                       : 2

  Format                                   : AAC

  Format/Info: Advanced Audio Codec

  Format profile: LC

  Codec ID                                 : 40

  Duration: 19 minutes 29 seconds

  Duration of the source: 19 min. 29 sec.

  Bit rate mode: Variable

  Flow rate: 192 Kbps

  Maximum bitrate: 251 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling: 48.0 KHz

  Compression mode: lossy

  Stream size: 26.4 million (0%)

  The video stream corresponding (h264) works very well. The same file works without any problem in 2014.0.1

  Even made an another file mp4/h264 + aac right out of first 20141 results in the same issue that I can't import the file back to the first without losing the audio stream.

  The next strange thing is a file just with an Mpeg2 Video stream:

  General

  Full name: D:\Output.m2v

  Format: MPEG Video

  Format version: Version 2

  File size: 362 MiB

  Duration: 10 min 0 sec

  Overall bit rate mode: Variable

  Overall bitrate: 5 058 Kbps

  Video

  Format: MPEG Video

  Format version: Version 2

  Format profile: Main@Main

  The format, BVOP settings: Yes

  Format settings, matrix: Default

  Parameters of the format, GOP: M = 3, N = 12

  Duration: 10 min 0 sec

  Bit rate mode: Variable

  Flow: 5 058 Kbps

  Maximum bitrate: 7 000 Kbps

  Width: 720 pixels

  Height: 576 pixels

  View picture format: 16:9

  Frame rate: 25.000 fps

  Standard: PAL

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  Compression mode: lossy

  /(pixel*Frame) bits: 0.488

  The first frame of time code: 00:00:00:00

  Stream size: 362 m (100%)

  The file has been exported with first 2014.0.1 and I'm able to import it ti 2014.0.1 without any problem. But 2014,1 indicates that the file contains no supported formats.

  All this is repeatable that I re - install 2014.0 and everything works - and 20141 with these problems. This problem appears in new projects as well as in the 2014.0 - imported projects.

  I found another statement of this kind of problem here: https://forums.adobe.com/thread/1595720 - but the proposed solution does not work for me.

  So - any suggestions?

  PS: 2 screenshots (same file in 2014.0.1 and 20141) and link to the .mp4 file used:

  

  

  File: https://www.wetransfer.com/downloads/6a22bbc6e0bf4e6eb4ee52c4f710922220141013131512/699af4 628ca4c2579b20903f4a4918d820141013131512/833bd0

  Hello

  You can try and reset the preferences. Go to adobe documents. Rename the old adobe adobe folder.

  By doing this, you will lose the custom keyboard shortcuts.

  Check whether or not this step allows.

  Thank you

  Arjun

• YouTube embed issues after update

  I ran the update of the generator required for CS6 folio and now when I try to embed a Youtube video using "insert html" under object, the youtube video does not work once I update the folio and try to post from my IPad.  It's just a black screen.  No idea what happened? I use the proper embed code (not flashing)
  It worked fine until I updated.  I rebooted everything-computer, inDesign, etc.  Thank you, Mark

  We just released an update for DPS tools dealing with issues around HTML/iFrame and version 25 buttons. You can download the updated components by following the links to http://www.adobe.com/go/learn_dps_install_en.

  Neil

• Is anyone else having iPhone delivered 6 with support issues after update to 9.3.2?

  The iPhone only 6 more upgrade 9.3.2. Since then, it "does not recognize' real apple brand cables load, unless it is attached to an iMac. What is going on?

  Hello sbossies,

  Thank you for using communities of Apple Support.

  I understand that your iPhone displays a warning that your accessory is not supported when connecting it. The support article, If your iPhone, iPad or iPod touch will not charge, provides information on the resolution of problems with your iPhone. But he said also the following about the issue you describe:

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  Best regards.