Acer Iconia W3 issues after update 8.1

Similar Questions

• New page appeared on Iconia B3 - A20 after update: what is it?

  Hello

  I just got a beautiful and brilliant Acer Iconia 10 B3 - A20 for Christmas and I love him to pieces, but I found something incomprehensible. He requested an update of the system, so I let it run in the interests of stability, but now an additional page has appeared. It says "news" at the top and it operates an advertisement for Acer products. Right, there is a symbol of the weather, as well as the location and temperature.

  Whatever this thing, I checked the settings and it seems to serve no function that I am in need of. Depuis_que I like to keep my devices running as efficiently as possible, can someone tell me a) what's this, and b) if it is possible to get rid of outside a rootkit?

  Thank you very much.

  Thanks for your response, BIllsey. I think you're right, it cannot be disabled. Since it is not really useful for me and it was bugging me (I'm one of those who love my gadgets to run only what I tell them!), I went to use the Launcher, Nova, which gave me a much more simplified interface which is more useful for me personally.

  Anyone read this thread, I would not recommend trying another Launcher on your tablet, unless you are already familiar with Android systems.

• Acer Aspire 5560 Dolby Advanced Audio driver issues after updating to Windows 10

  Hello

  I have an Acer Aspire 5560. I've updated to Windows 10 and now I am getting up the following message is displayed at startup.

  The current Dolby audio driver is 7.2.8000.17 and the software application expects that the version of the driver 7.2.700.7. Please install a valid combination of pilot application and software.

  Can any help with a fix for this?

  Try this drivers too:

  http://station-drivers.com/index.php/downloads/func-startdown/1591/

  100% trusted Web site.

  Double click on the exe and then the extracted folder, find setup.exe and run it.

• Start-up and white screen issue after updating to v10.11.5?

  I can't say 100% that my problems are related to the last update, but I thought I'd ask.

  I've updated about 4 or 5 days ago, and although the questions did not begin immediately, they start after the update. It should be noted that I have never had issues like this before.

  Here are some of my questions on my MacBook Pro (17 inch, early 2011), 2.2 GHz Intel Core i7, 8 GB at 1333 MHz DDR3, Intel HD 3000 512 MB graphics card

  1. the monitor will sometimes go haywire and a strange split, screen where the mouse can go to the left side of the screen and reappear on the right side of the screen, because the office is now split into two

  2. computer crashes and the monitor starts flashing to show a blue zigzag striped background

  3 freeze during startup and never restart computer. Occasionally, it will start very well, but the computer locks upwards at some point while using

  4 computer at boot flashing out to a white screen then restart never

  Thanks for any help.

  Now I'm starting to think my problems are related to a single user, sign in. Only 2 people use the computer and my connection seems to be fine. No crashes or anything like that.

  The problems start when my wife logs in to his user account.

  Thought I would mention it.

  Any help/response would be appreciated.

• iPhone 5 netwrok issues after updating ios 9.2.1

  After upgrading to ios 9.2.1 my iphone 5 is not able to register with network airtel cell.

  Hi all

  I am also facing the same issue. My iPhone 5 will not connect to the cellular network AFTER that iOS updated 9.2.1 to level.

  Thank you, Siva

• Aspire V3 - 772G wifi issues after update win10

  Hello!

  Unfortunately problems with wifi cell phone after last win10 update, not completely broken but work very unconsistent.

  It's works well at home, although it seems that depending on where you are and what networks that are around you, IE to sometimes work when starting the computer it work, but the menu wifi crashes when you try to change the network, "connecting" forever, and then eventually crashes and the menu are all networks at all. Sometimes at startup it as today he shows not all networks at all without doing anything.

  Info:

  -updated for win8.1--> win 10 home

  -Qualcomm, Atheros AR5BWB222 Wireless Network adapt

  -version of the driver 3.0.2.182

  Update the driver Atheros felt like the natural end to start to check, but even though this model is on the list of the win10 from Acer support, no wireless/atheros driver for windows 10 is available when searching on the dirver for Acer download section. Found nothing also when you search for updates in the Device Manager. I hope and guess win10 is now one year old, the driver is supposed to be beautiful and there's nothing Acer "forgot" to do? Anyone know?

  Have you tried running File Checker Windows system, no problems which are not. The unoffical atheros site - drivers.com claim to have a 'new' pilot win10 for my model, but not really my cup of tea to mess with unoffical drivers, it really shouldn't be necessary.

  After searching the Web, I saw all kinds of variations of symptom of wifi-questions about win10 updates, a bit similar to mine but with very different solutions. Really a mess for the "average user" to know where to start troubleshooting unfortunately.

  Anyone with experience of a similar problem? Have a fine system of win8.1 image to roll back that as a last resort, if I can't sort out, but it would be a shame. :-(

  Thanks for the input!

  No matter when I have a driver like that, problem I open the Device Manager, go to the device and uninstall/remove the drive from the device. Then restart and let the system see the drive automatically.

  With the pilot WiFi which can be more difficult. Can you connect directly to your router for a network connection? (a decent connector 10/100/USB 2.0 is under $12 on Amazon, $15 for a USB 3.0 10/100/1000. )

• Acer iconia a510 jelly bean update for the Australia

  ACer, when are you going to release the jelly bean update for the Australia, it was published in other markets before Christmas. It is now March and does still no update!

  I've now updated to Jelly Bean. Forthose who cannot get their a510 updated here is why. You must first upgrade to the last image in the ICS. The version of the image that I was on has been Acer_AV041_A510_RV10RC03_AAP_AU. * How to check the version of the Image of your A510? Path: [parameters]--> [about Tablet]--> [version of the Image] If you have the same image as above then you haave upgrade.

  Go to the acer support page http://www.acer.com.au/ac/en/AU/content/drivers

  Select your Tablet model

  Then select the OS tab towards the bottom of the page.

  Download the Acer.AV041.A510.RV28RC08.AAP.AU. This will download a zip file. In the zip file will be 2 files one will be instructions on how to upgrade.

  Once you have upgraded to the last frame of the ICS and the Tablet has restarted after a little while you will receive a message in the lower left area of notification that a uprade system is available. This upgrade is Jelly Bean.

  Hope this helps someone who was also oost I was aboutnot get the upgrade.

• BSOD issues after update 8.1

  My computer has no problems with Windows 8.0.  After the Windows 8.1 update, the system will BSOD crash leave once all the hours to once every few minutes.  I didn't notice all patterns on the block;. It is not obviously related to the execution of any piece of software. Often, the error message is different from the previous.  Some I've seen include:

  • Structure criticizes Corruption
  • Kernel security check failed
  • Memory management
  • IPF in nonpaged area
  • Unhandled Thread Exception system
  • Attempt to write to Readonly memory

  The research I've done has led to assume that it is a driver issue, but I am not sure. Today, the computer has to reset several times without warning and without displaying any error messages at all.  How can I get to the bottom of what's going on and solve the problem?  Any help would be greatly appreciated. Thank you!

  Thanks for the information.

  Your RAM is faulty and must be replaced.

  Kind regards

  Patrick

• Acer Iconia W700 8.1 update

  As the title says, I have an Acer Tablet, a w700. I upgraded to 8.1 and basically became unnecessary.  I had to go out and buy a dvd drive to reinstall windows. It runs great now, but I have a few questions.

  1. everyone I spoke with said not to upgrade with this tablet and leave with 8.0. This can be done? I will be able to update? This will cause other problems?

  2. is there a way be updated so that he won't not wobbly?  I heard that the only way was to buy a USB upgrade with 8.1 on it and restore windows in this way, otherwise, drivers will weird.

  3. just a general question, why Microsoft has so that hard bleeding?

  I appreciate all help. Must say that this community has proved to be one of the best. Thanks in advance.

  Hello

  You must apply the updates of Windows 8 applicable before moving on to 8.1. However if it
  known issues and then the upgrade to 8.1 is not always possible; as BIOS, chipset or main engines

  conflicts.

  You must be in contact with Acer Support ask in their forums.

  Rob - SpiritX

• MacBook pro issues after updating to Mac OS siera

  I have problems with the new model MBP retina 15 inch Mid 2015 with Force Touch.

  Even I have the same problem. Prior to Macos Siera update everything worked well. After OS update am unable to run my java applications with netbeans. If I start to run any project in netbeans after a time tomcat server does not start and displays tomcat port XXXX is already in use and could not start.

  As well as the sound noisy fan and macbook pro gets hot on the back side. If I stop NetBeans sound fan stops and the macbook to cool in a few minutes.

  After the closure of the tomcat server netbeans IDE does not stop. If you put localhost:XXXX on browser it shows success of tomcat installation page.

  Help us please if you have an idea to solve this problem.

  Having the same problem also.

  Updated since a Yosemite perfectly work for OS X for this!

  The same phenomenon occurs when you try to start Glassfish and vampire tetra using netbeans. Themselves (Glassfish and Payara), they work perfectly well if started via the terminal. I don't really know where there is discord.

• Card SD & USB issues after update of El Capitan

  Hi all!

  Just updated to Yosemite's El Capitan.  Running iMac (21.5 inch late 2009) - to update of Yosemite point has been completely up to date as well as all software and drivers.  Now problems after the iMac to wake up in the morning with some of the built-in ports.

  1. SD card reader - have to restart so that this works, but only works for an hour or two, it is more readings.

  2 ports USB - external HD holding that nothing else than music files must be disconnected and then reconnected to be recognized and to mount.  Anomaly is that Time Machine on back of the iMac USB continues to function properly and rises when waking from sleep in the morning.

  3-4 ports USB hub plugged back has only 2 operational ports in the morning, must either be disconnected and then reconnected to have all four ports work.  It works sometimes for the rest of the day or only works for one hour UX as well.

  4 keyboard (yes I prefer a cable on BT) takes a minute or two to be recognized after the awakening of fashion 'sleep' in the morning.

  I tried to reboot my machine?  Yes, several times.

  I tried to reset the SMC?  Yes, several times.

  I tried to reset the NVRAM/PRAM memory?  Yes, several times.

  Any suggestions on additional solutions without getting really heavy in the Terminal?  Not really keen to try some of the recommendations Terminal found here on communities, as I do not play with the programming of the OS.

  Thank you!

  Thanks for the nine people who have seen this post.  Unfortunately no one answered, so I 'solved it' of it the only way I knew how.  Rolled back to Yosemite.  I hope that the new Sierra OS will be an improvement on El Capitan.

• HP Probook T3L12UT #ABA G3 450: Audio driver issues after update of Windows 10 anniversary

  After upgrading the operating system Windows (10.0.14393), Conexant driver failed. No device installed. Also in the Device Manager, Intel High Definition Audio is missing a driver. Cannot find a copy (grouped with another driver... video perhaps).

  In any case, fixed the problem of driver Conexant by completely uninstall Conexant Audio ISST and re-install.

  Now, my only problem is that the audio does not turn off to a HD TV plugged into the HDMI port. Video is fine, but no sound. HDMI does not show well in Audio devices.

  Any ideas? HDMI port connected to the Intel High Definition Audio device?

  The device for the device ID Intel HD Audio are:

  INTELAUDIO\FUNC_01 & VEN_8086 & DEV_2809 & SUBSYS_80860101 & REV_1000
  INTELAUDIO\FUNC_01, VEN_8086 & DEV_2809 & SUBSYS_80860101

  Thank you

  Ed ski

  Hello:

  Yes, the Intel HD audio device that needs the Intel graphics driver reinstalled.

  I propose this option to install the driver, because sometimes simply reinstall the graphics driver Intel does not work.

  Download and install this free utility for files.  The file 2nd on the list is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, download and save, but do not run this driver Intel graphics from the support page of your laptop.

  This package provides the Intel video drivers, control panel and display audio driver for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75984.exe

  After you download the file of the graphics driver, right-click on it and select 7 - zip from the list.

  Have 7-Zip extract of: and leave it to decompress the file in the file name (sp75984).

  When this is done, go to Device Manager and click on the Intel HDMI audio device problem requiring the driver.

  Click the driver tab.

  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC, and you should be able to get audio and video from the HDMI connection.

• Qosmio F50 issues after update Bios 1.50

  Hello

  I have updated Bios version 1.50.
  I work with audio software and I noticed the performance issue (about 15%-20% performance reduction!).
  Operational front is also strange.

  Now, I can not turn off the lights or start Media center or something else.

  How can I downgrade the Bios Version 1.30?
  Winphlash doesn't let me do that.

  Help, please!

  Thank you

  May not be the answer you are looking for, but have you tried to do a restore of the software? Remember to back up everything!

• Questions of touchpad ACER v3 - 571 G after updating Windows 8.1

  Hi guys, I hope someone here could help me.

  I just upgraded to Windows 8 to 8.1 and immediately after, began having problems with my touchpad... It works, but too well.

  I can't turn it off via the control panel. I can't upgrade the driver...  I tried to remove the driver, but then my laptop required a reboot, and after rebooting, the cushion is fully functional and not deleted.  When I try to go into the properties and disable / enable all options, after restarting the computer, those changes are lost and I am to square.

  help... Please?

  Make sure you've got the directory drivers Acer pointed to the V3 - 571G for Win8.1 64-bit.

  Jack E/NJ

• compatibility issue after updating to the latest version of iTunes

  I have windows 7, 64 bit and have had iTunes top for more than a year.  I've just updated to the latest version and now I can't access it.  It is said that there is a compatibility issue.

  I would like to uninstall iTunes, reboot your computer.

  Reinstall again. If you went on an older version, which might be the cause.

  iTunes for Windows Vista or Windows 7: troubleshooting...
  http://support.Apple.com/kb/ts1717