Sansa 4 GB V2 unexpected shutdown
So the other day I was mowing the lawn listen to some tracks well when my Sansa will stop on its own. The screen flashed several times to show what was playing, however the time track and such were all frozen (triangle Play has stated that the song was supposed to play however). So I tried a soft reset and hear the click in my helmet. Instead of restart however, the player remained all black. Another soft reset, I thought. Evil. The player has clicked in the helmet to signify the reset took place but the screen remains black. So I took part as I had 20 different mp3 players who broke everything, I decided I am no doubt fixing this little * beep * before that I spend on a total of two grand on mp3 players.
After that I opened it upward, I discovered how difficult to attach the cable connector Zif and Ribbon for scrolling can be so I left off the coast and set the player to reload, is where it gets interesting. The computer does not read the device more or load it, not to mention that it freezes my PC until I unplug, so I unplugged it. Today (2 days since she beat and always disconnected/removed) I decided, why not try and turn it on and guess what... IT WORKED! for five minutes while I tried to reattach the ribbon cable. Then it just cut off and it's all the same above-mentioned problematic things.
Any extra input on this would be greatly appreciated!
-Josh
P.S. I looked around the wire and have not seen similar problems, so I'm sorry if I missed a subject of mirror-image.
Crowley188 wrote:
You don't think they will have a problem with me already open the device haha? Either way thanks, tapeworm!
I do volunteer work would not necessarily be this information.
Tags: SanDisk Sansa
Similar Questions
-
Unexpected shutdown of Windows (blue screen)
New installation of all-in-one Photosmart 6510 seemed to go fine (try USB first, since will have the ability to scan). A page prints fine, but something about the synthesis immediately after (some final development communication, or maybe even the 'Rewards' popup?) causes the unexpected shutdown of Windows with the blue screen. No further assistance was suggested by Windows. No errors were detected by the doctor printer hp application that I downloaded.
Hello
First - just for your information, you can also scan using the wireless connection.
If you have a new PC, maybe you have a USB 3.0 on this subject?
If so, be sure to plug the printer into the USB 2.0 port as the HP device does not support the connection USB3.
-
Error "unexpected shutdown windows" and the need to restart the computer
Original title:
I use Windows Vista, I get the message "unexpected shutdown of windows" and I'm having to reboot is a solution to the Please this problem?
Hello
1. Once you get this error message?
2. are you aware of any changes made to the computer, before the show?
Method 1:
Step 1: Safe Mode
Start your computer in safe mode and check the number.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: Clean boot
If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.
Method 2:
Update all the device drivers for your computer.
Updated a hardware driver that is not working properly
I hope this helps.
-
Strange reboots and the message "Windows has recovered from unexpected shutdown.
My computer makes strange decisions. When I got off the computer for a long time and back I find message "Windows has recovered from unexpected shutdown" it happens only when I'm without my computer for an hour or more.
My Windows Vista 64 operating system
Hello
Two ways to solve this problem, a point of view of sleep/hibernation and one of
the overall performance. Even if the two methods in common, you may need to use both.1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------
How can I enable hibernation on my Windows Vista computer?
http://support.Microsoft.com/default.aspx/KB/929658
How to reactivate the lack of Hibernate Option in Windows Vista?
http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/-------------------------------------------
Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
similar are not enabled.Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
type of hibernation - see turn Hibernate on / offAll the default power plans and then set them as you wish.
I hope this helps.
-
Hello
now I feel the hell with my R61. Any system I exported the detail of information - http://home.zcu.cz/~snajberk/System.html
My computer started the unexpected shutdown. I just work and it turns off. Then when I turn it on it usually tries to start and dies completely - no chance of turning it back on. I have to unplug it, get the battery and after that I can again activate it. After that Rescue and Recovery usually starts and is trying to fix. Then he sometimes starts, sometimes dies again and sometimes again Rescue and Recovery.
Today, he's dead 5times. Before today, never. Yesterday, I worked normally, installed nothing, nothing deleted. I don't know why this is happening now so suddenly and so often and why?
Can anyone help please?
Thank you all.
Today, I have my lenovo recover.
It was really an overheat problem. They had to change the motherboard and the fan.So if anyone has the same problem, try to install speedfan and check your CPU temp and other times.
-
Windows recovering from unexpected shutdown
Hello
My computer will crash at random times sometimes sitting idle. When reboot it comes up with:
Windows is recovering from an unexpected shutdown
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 6153More information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 87D54A41
BCP3: 88D5B74C
BCP4: 88D5B448
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\Mini040110-14.dmp
C:\Users\Glen\AppData\Local\Temp\WER-116158-0.SysData.XML
C:\Users\Glen\AppData\Local\Temp\WERDF4.tmp.version.txtAny ideas?
The computer is a Dell Inspiron 1525 about 18mths old. Is no longer under warranty
Hi Phatkiwi,
A. from when what happens?
B. any hardware or software change on your computer?
Are c. you an error code when the computer shuts down?
You can start your computer in safe mode to check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Previous post: the result.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
Windows has recovered from an unexpected shutdown. you need to download a patch
Remember - this is a public forum so never post private such as e-mail or telephone information
Whenever I close my laptop, or standby Windows displays "Windows has recovered from an unexpected shutdown.When I open the box of the solution, I told myself that I need to download a patch- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Download the hotfix. Do you have a question?
--
..
--
"nickjackman" wrote in message news: f983d75e-e555-45ed-8da2-540cf00f4924...
> Remember - this is a public forum so never post private information such
> like mail or telephone
>
>
> Whenever I have shut down my laptop, or put it to sleep that Windows displays "Windows".
"> has recovered from an unexpected shutdown.
> When I open the box of the solution, I told myself that I need to download a patch
>
> a.. You have problems with programs
> b.. Error messages
> c.. Recent changes to your computer
> d.. What you have already tried to solve the problem
> -
"Windows has recovered from an unexpected shutdown" Please help
Well firstly hello =]
The problem I have is that when I leave my PC on overnight, for a reason any update/install/etc when I wake up in the morning I see that it has restarted and he has a message on the screen that says: "Windows has recovered from an unexpected shutdown. When I click details see this is what I get:
Product
WindowsProblem
Stop unexpectedlyDate
08-03-2010 02:28Status
Solution availableSignature of the problem
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 11274Files helping to describe the problem (some files may be is no longer available)
Mini030810 - 01.dmp
SysData. XML
Version.txt
MEMORY. DMPAdditional information about the problem
BCCode: 124
BCP1: 00000000
BCP2: 85E133F0
BCP3: B2000000
BCP4: 00020005
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Information about the server: db7659f6-368a-4113-8453-8a5b5e45cb39(Here's a screenshot in case its more useful: http://img694.imageshack.us/img694/9095/problemhm.jpg)
This happens whenever I leave my PC slowed down and go to bed, it IS NOT the case while I use it.
I'll be glad if someone could help me because its making me crazy lol.
The PC is new I bought it a week ago about and for as far as I know its been happening since I bought it.4 GB RAM DDR3
Intel Core i5-650 3.20 GHz
nVIDIA 9600 GT 1 GB DDR3
Windows Vista Edition Home Premium 32-bit xWe do not choose it as the products you BUY to fix a NEW computer from the links that you provide here.
Your computer is covered by the warranty of the manufacturer of your computer.
I do not get a NEW PC.
Download the the difficulty of YOUR manufacturer.
Mick Murphy - Microsoft partner
-
Have had problems since 31/12/09. Tech replaced Dell hard drive 14/01/10 because all software solutions did not resolve various problems, including the screen black and white letters indicating the mode without failure, or count down the regular opening. System Restore has used several times, all software removed and replaced. New Quickbooks reinstalled two times 10, it usually starts up quickly. I was told not to turn it off, just let it run. It automatically goes into sleep mode, it still does not start correctly. Last message is that Windows has recovered from an unexpected shutdown; Windows can check online for a solution to the problem. Problem event name: bluescreen
Windows has recovered from an unexpected shutdown. Windows can check online for a solution to the problem. Problem event name: bluescreen.
Hi slopchop
In the last few days have installed new programs? Or Anti Virus?
Try the steps in this link and check:
http://support.Microsoft.com/kb/958233
http://support.Microsoft.com/kb/925810
Also refer to:
After back and let us know if it helped to solve your problem.
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows has recovered from unexpected shutdown down
When I leave my computer idle for some time and come back I can't display or more often, I get the message that Windows has recovered from unexpected shutdown down. I tried to update all drivers and uninstalled the device intel in Device Manager. I also bought Malware Bytes, but in vain. I am a novice, so any proposed solution must be in clear language regular and detailed. Thank you.
Jitali
These accidents were related to the corruption of memory (probably caused by a driver).Run these two tests to check your memory and find which driver is causing the problem. Launch auditor. You need not run memtest again unless you want to.
If you are overclocking anything reset by default before running these tests.In other words STOP! If you don't know what it means that you're probably not
1-Driver Verifier (for full instructions, see our wiki here)
-
Windows has just recovered from an unexpected shutdown
Whenever I leave my computer for a few minutes and am not using it, it stops and when I turn it back on I get the message "Windows has recovered from an unexpected shutdown" and it asks if I want to run it in safe mode or normally. I called the manufacturer of the computer, and they say it's the operating system... Win 7 this is a brand new computer and I can't seem to understand.
Hello
you always get ths crash:
Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE
This bug check indicates that the driver is in an inconsistent or invalid power state.
http://msdn.Microsoft.com/en-us/library/ff559329%28VS.85%29.aspx
Arguments:
Arg1: 0000000000000003, what a device object has blocked an Irp for too longSo I checked the hanging query I/O (IRP) package:
No Mdl: No system don't buffer: wire 00000000: Irp stack trace.
cmd flg cl device file completion-context
[0, 0] 0 0 00000000 00000000 00000000 - 00000000Args: 00000000 00000000 00000000 00000000
[0, 0] 0 0 00000000 00000000 00000000 - 00000000Args: 00000000 00000000 00000000 00000000
[0, 0] 0 0 00000000 00000000 00000000 - 00000000Args: 00000000 00000000 00000000 00000000
[0, 0] 0 0 00000000 00000000 00000000 - 00000000Args: 00000000 00000000 00000000 00000000
[0, 0] 0 0 00000000 00000000 00000000 - 00000000Args: 00000000 00000000 00000000 00000000
[0, 0] 0 0 00000000 00000000 00000000 - 00000000Args: 00000000 00000000 00000000 00000000
> [16, 3] e1 0 fffffa8001cd3050 fffff80002cc3f70-fffffa80052c1640 00000000 success error cancel pending
Cannot load the image \SystemRoot\system32\DRIVERS\MRVW24C.sys , 0n2 error Win32
WARNING: Unable to verify timestamp for MRVW24C.sys
ERROR: Module load completed but symbols can be loaded for MRVW24C.sys
------Driver\MRV6X64U nt! PopSystemIrpCompletion
Args: 00015400 00000000 00000005 00000003
[0, 0] 0 0 00000000 00000000 00000000 - fffffa80052c1640Args: 00000000 00000000 00000000 00000000
The cause is the driver MRVW24C.sys:
Image path: \SystemRoot\system32\DRIVERS\MRVW24C.sys
Image name: MRVW24C.sys
Timestamp: Thu Jan 19 11:03 2007This driver is too old and not Windows 7 compatible. Because there is no new driver unit (revA1 D-link wireless adapter DWA-130), change the energy saving features and disable them, so that the appliance is still running. This should fix it. If not, buy a Windos 7 compatible wireless adapter.
Best regards
André"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Why not my wireless capability on again after that an unexpected shutdown has occurred?
Why not my wireless capability on again after that an unexpected shutdown has occurred?
Hello
Thanks for choosing Windows and thank you for providing an opportunity to help you.
According to the description, you are having problems with wireless capabilities does not not after stopping.
Method 1: run the troubleshooter and check if it works.
Using the troubleshooter from network in Windows 7
Method 2: Perform the steps from the link below and see if it helps.
http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network
Meet us if you experience problems with the wireless connection or any other problem of Windows, and we would be happy to help you.
Good day!
Hope this information helps.
-
X 1 carbon after the closure of cover: Windows has recovered from unexpected shutdown
Hi all
I saw this forum since I got my X carbon 1. Its a great machine, but I just startred a problem. Whenever I close my lid and open it back up after a few minutes, the computer is black screened and custom allow to reconnect. If I leave it for a while, it will be an "unexpected shutdown" and reboot and give me the details of the problem, once it gets to the home screen.
Here are the details:
Problem event name: Blunescreen
OS VERSION: 6.1.7601.2.0.256.48
Locale ID: 1033
BRITISH COLUMBIA CODE: 9F
BCP1: 0000000000000003
BCP2: FFFFFA8004149060
BCP:FFFFF80047733D8
CP4:FFFFFA8003B0B010
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1
A couple of things that may be a coincidence or cause?
(1) I have to connect the internet access where I was this weekend. He keeps having limited access to the network, while other computers can connect.
(2) the symantec anti virus trial the day ended, it started.
(3) I use a lot of web storage services (google drive, skydrive) and maybe they're trying to connect when I shut down the computer?
(4) when it is closed and I unplug the charger, the charge indicator light on the outside remains lit out for some reason any. Don't know if that is related but it shouldn't behave like that my understanding of the computer.
If anyone can help me, I would be very grateful!
Best,
ER
Hi all
What the matter was, it has since resolved itself. I think it is the anti-virus software. MSE installing fixed. See you soon!
-
When I try to stop it restarts and also error Windows has recovered from unexpected shutdown.
ORIGINAL TITLE: I can't stop computer.
I can't get the computer to shutdown. When I try to stop, it restarts.
After that which displays Note: popular has recovered from unexpected shutdown.Please, help me to solve this problem.Hello
Did you of recent changes to the computer before the show?
I suggest to download and install the patch that is available in the following link and check if it helps.
You cannot shut down a computer that is running Windows 7, or sleep: http://support.microsoft.com/kb/977307
It will be useful. -
Satellite A205 - unexpected shutdown
Hey foulks,.
At this computer for 1.5 years. Disassembled my s4607 A205, cleaned and Artic Silver on the chip in mind after that cleaning with denatured alchol. Problem persists, three days later.
Basic time are around 60 C. The machine seems to do unexpected stop at night. The next morning, hit power, get the screen option to boot normally and it rises and works very well.
Usually, the machine just closed unexpectedly, no warning, no shutdown process, just power. This has happened to my fingers only 4 times. All the other times it was overnight, probably more than 100 times. Also, when I go to the BIOS utility and pass dynamic low, NO PROBLEMS. Toshiba has a problem of design with this laptop. My A305 series doesn't have this problem.
I now run a second monitor turned off this machine to the extended format. Not sure if this could be a cause. I think maybe it is and the ACPI fan speed issue but not to say. Sometimes the fan goes to a mid level speed balance and works very well for long periods.
I am all of these ideas. I guess with this computer, I bought a DEFECTIVE of Toshiba PORTABLE computer.
Mike
Hello!
I'm pretty sure that you didn t bought a defective laptop with Toshiba because you worte that you already had this computer for 1.5 years.
And even if you bought a defective laptop, these things happen. Nobody's perfect and for problems around the laptop, you can contact an authorized service provider. They can repair the laptop to and under warranty it s free.However, if I understand you just the problem starts after you have disassembled the laptop to clean. Is this fair?
If so you should check the laptop again. Maybe you did something wrong or you used enough/not enough thermal grease.
Check this box!If you can t help yourself, you must contact an authorized assistance service provider. Technicians can help you. ;)
Good bye
Maybe you are looking for
-
So I would like to know if some geek bozo can turn off my master password in all: config.
-
How to see the color box in a cluster
Hello I need a table of items of cluster that contains my table ' color 'and my table "color table". "I would like to see the actual color but not 8271157. I give you my example attached Thank you for your help
-
Problem with opening files and programs after the attack "rogue security."
Earlier this year, I met a rogue security program called Windows Security 2011. I had removed it, but I'll still have some serious problems. I found another user here, who had a similar encounter: http://answers.microsoft.com/en-us/windows/forum/wind
-
I have question for installutil.exe. I have to manually install a service with installutil.exe, but I have no idea how make it work. When I opened the installutil a screen that looks like a command prompt screen appears and disappears for a split sec
-
Cisco RV042 cannot create a simple VPN?
Hello I'm confused because I'm trying to set up a simple VPN (client of the bridge), but I can't! A SSL VPN or an IPSEC VPN, whatever... The RV042 firmware is up-to-date, and I try QuickVPN as a customer vpn (also updated...) My configuration details