Qosmio F50 issues after update Bios 1.50

Similar Questions

• Qosmio F50 - 10Z - after update BIOS lit buttons do not work

  TEMPRO alerted me on an update of the BIOS - bios - 20090415092322.zip - for 32-bit Vista, published April 15, 2009 for my F50 - 10Z.

  Since then, the enlightened "buttons" at the top of my keyboard no longer work - including, annoyingly, the key to turn the light off.

  Is that what I can do at this point? I tried a system restore but it did not affect the BIOS.

  I agree with Akuma. Now, you can try to set the BIOS to default settings and also reinstall the package of added value.
  This package also contains command buttons utility.

  Perhaps after having reinstalled it everything will work properly again.

  Please send us a feedback!

• Qosmio F45 overheating after update Bios v1.90

  Hi again.

  Last night that I've updated my Qosmio F45-AV413 BIOS with version "qf45v190" but, today, in the afternoon, I noticed that my laptop was so slow and it was overheating!

  I immediately went to reset Windows Vista, but instead, computer laptop completely off.

  I left the rest of the computer for a few minutes and it works again. After a few hours of work, he began to behave terribly slow and heat once again! I have reset and when I clicked on F2 to enter setup, the computer turns off...

  I'm sure it has something to do with the latest Bios Update!

  Everyone knows the same problem?

  BIOS version "qf45v150" played very well and I think in flashing my laptop with this version. IS THIS POSSIBLE? Can I go back to an older version of BIOS? PLEASE HELP ME!

  Thanks a lot for your answers.

  Hello

  I found on the Toshiba page we v1.5 of BIOS for the Qosmio F45 (PQF43U, PQF46U)

  Toshiba on this page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  Here you have to choose your Qosmio F45 model and you should get all BIOS versions available for this series.

  Maybe it's possible to downgrade the BIOS to the earlier version.

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

  Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

  Laptop computer has restarted:

  1 Fireed power led,

  2 Powered hard drive for 2 seconds to turn it off.

  3. stops...

  No Dell Logo, no beeps, can't go in the Bios.

  Test LCD works OK.

  Remove the module of Ram, power on and listen to beep

  Pressing the END key and power for laptop has no effect.

  Any idea?

  Yes. I did it.

  Laptop have bios Phoenix.

  Phoenix Bios have restored the USB Flash procedure.

  This procedure to restore the BIOS:

  1. download USB flash less than 4 GB.

  2 format in FAT.

  3. get your flash update of the Dell store - xxxx.exe

  4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

  5 extracted copy of Bios.cap for the flash player.

  6. turn off the power to the laptop.

  Next 7,8 step may not be necessary but I did it.

  7 disconnected all perihpericals with battery and charger.

  8 disconnect the HARD drive

  9. connect the USB on the laptop on the right side.

  10 press and hold the END

  11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

  12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

  13. After finishing laptop restarts and worked well.

• Qosmio F50 - bright/Fucntion keys do not work after update BIOS buttons

  OK... I read a similar post and has FACT EXACTLY what IT SAID TO DO... He solved half of the problem or less... after the update to the new bios that I'd like speed or make my Qosmio energy gave me problem from the first day I installed it...

  The reason why I upgraded to was I thought he could solve my problem of flash memory card. They NEVER APPEAR AFTER REBOOTT... I ALWAYS HAVE RESTART THEM IN THE WINDOWS MENU... I thought that if I do a scheduled task. This would solve the problem. Guess what... It SCREWED my windows calendar place... a mistake self-protection
  This brings me to install the new bios... After you install... He has created ONE MORE PROBLEM, INTOTAL - TWO
  (1) KEYS INFORMED DON'T WORK
  (2) FLASH CARDS DO NOT WORK
  After following the instructions of a thread posted here... He told me to remove the VAP and reinstall... Guess what... it solve the key problem... but MY KEYYYYYY FUNCTION... I restored my pc... He said if your function key is disabled... GUESS WHAAT AGAIN... THE FIRST PROBLEM TO... ILLUMINATED KEYS DO NOT WORK... I later discovered that I can't have both things at the same time according to the instructions... Oh Yes... I forgot to mention;... CARD FLASH showing... shut up has never shown... restoration takes me to the original problem...

  I think down my BIOS version that might solve the problem but can't find it... I don t want to restore because I might install additional software like the game... Assassin s creed... BTW... It works AMAAAZZZINNNN... but the multimedia and function keys keep on bugging me
  I have a Qosmio F50-126 with Vista 32 bit...

  Try:

  Reset the BIOS to its default settings.
  VAP to uninstall and install the latest version from the Toshiba site.

  PS I think you can change the lighting in the BIOS, have you checked this setting?

• Qosmio F50 - after update BIOS Bluetooth does not work anymore

  I need to update BIOS and F50 v 2.20.

  After update Bluetooth stopped working. Bluetooth in the taskbar icon turned red and I couldn't use any bluetooth device. I got my comp. 3 times to factory State, nothing has changed. After that I uninstalled the bluetooth stack, when I re install the installation crashes and now there is no icon in the taskbar and no link in Control Panel.
  I've tried everything.

  Need some professional help. My computer is only 2 months old.
  I am very angry.

  There is a new version of battery available Bluetooth.
  http://APS2.toshiba-tro.de/Bluetooth/?page=download

  But before install you it I recommend to remove the old battery installation BT.
  After removing the battery of BT, reboot the laptop and follow the BT facility.

  Installation should finish correctly and then you can activate using the FN + F8 keys.

  Should work.

• Qosmio F50 - need to update the BIOS in the order of installation Win7 64-bit

  Dear community,

  I plan to upgrade to Windows 7 64 bit. My laptop is Toshiba Qosmio F50 - 10 M with a VISTA32bit preinstalled.

  Is it necessary to update the prior consent of BIOS install the new OS? I read that there is a BIOS update Fa? ¼r VISTA64bit available, but none that I discovered for Win7 64 bit.

  Can give you a hint?

  I am confident and happy to own a laptop as powerful but this not filled OS named VISTA makes me nuts more in addition to reading all these great reports about the benefits of Windows7!

  Looking forward to read your welcome responses

  Yours,
  Starmind

  Hello

  Is there a BIOS for Vista 32 bit and 64 bit.
  There is no special Win 7 BIOS.

  If you want to install Win 7 64 bit, I advise to use the BIOS for Vista 64-bit. If you want to install Win 7 32 bit-> choose vista 32-bit BIOS.

  Generally, it should be possible to upgrade the BIOS under Win 7 so, but because that it s a BIOS for the Vista operating system, I recommend upgrading the BIOS in Vista.

• Qosmio F50 - BSOD after loggin into Windows and only safe mode works

  Hi all!

  I have read many posts on the forum and they are all a great help... very good community... but I fear now, I'm the one who has problems ask for help...

  I have a Toshiba Qosmio F50 with Windows Vista and I've updated 3 days ago the pilots of the BIOS, Fingerprint Software and software of face recognition to the latest versions with updates on the official website of toshiba. After that, I got a blue screen, 4 hours later, and since then I connect just Windows and 10 seconds later... BLUE SCREEN! and no other choice than to unplug the computer and switch off. I can only log in Mode without failure.

  Unfortunately I can't get windows to a State of previows that I don't have the option to save backups of active recovery.

  I have some windows system errors in case the Manager and that's what they say:

  *-------------------------------------------------------------------------------------------------------------*

  DCOM got error "1068" try to start the service fdPHost with arguments "" to start the server:
  {145B4335-FE2A-4927-A040-7C35AD3180EF}

  DCOM got error "1084" try to start the service EventSystem with arguments "" to start the server:
  {1BE1F766-5536-11D1-B726-00C04FB926AF}

  DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:
  {DD522ACC-F821-461A-A407-50B198B896DC}

  Unable to start a DCOM Server: {A0717E52-8AC8-4DD9-8682-0B76775125E6}. The error:
  '2' that happened at the start of this command: c:\windows\system32\divxsm.exe-integration

  The next (s) starting or starting system could not load:
  mfehidk
  SCDEmu
  spldr
  Tosrfcom
  Wanarpv6
  ---------------------------------------------

  * I have also being the .dmp file debugging registration errors and content: *.

  ------------------------------------------------

  1: kd >! analyze - v
  ************************************************** *****************************
  * *
  * Bugcheck analysis *.
  * *
  ************************************************** *****************************

  KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
  It is a very common bugcheck. Usually the PIN address of exception
  the driver/function that caused the problem. Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003. This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG. It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG. This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: c0000005, the unhandled exception code
  Arg2: 8eb51aa9, the address that the exception occurred at
  Arg3: 8b31b010, frame trap
  Arg4: 00000000

  Debugging information:
  ------------------

  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The memory could not be %s.

  FAULTING_IP:
  + 12A
  8eb51aa9 f6461c40 test byte ptr [esi + 1Ch], 40 h

  TRAP_FRAME: 8b31b010-(.trap 0xffffffff8b31b010)
  ErrCode = 00000000
  EAX = 00000000 ebx = 927 b 4470 ecx = 927 b 4470 edx = 003e0000 esi = 00000001 edi = 927 b 4504
  EIP = 8eb51aa9 esp = 8b31b084 ebp = 8b31b2b8 iopl = 0 nv up ei pl nz na po nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010202
  8eb51aa9 f6461c40 test byte ptr [esi + 1Ch], 40 h ds:0023:0000001 d =?
  Reset the default scope

  CUSTOMER_CRASH_COUNT: 3

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0X8E

  Nom_processus: Skype.exe

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from 90f18482 to 8eb51aa9

  STACK_TEXT:
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  8b31b2b8 90f18482 00000000 00000000 927b 4470 0x8eb51aa9
  8b31b2e4 8224010 89bbe960 c a50c5b48 b 927, 4470 Mpfp + 0 x 7482
  8b31b328 8222b3e7 8222b 712 69798145 and 00000002 nt! IopfCompleteRequest + 0x11d
  8b31b550 90f5cfd7 89b4a3e8 84f341a8 00000010 nt! RtlWalkFrameChain + 0 x 58
  8b31b574 822c1fd3 adaf0d40 a50c5b48 a50c5b48 tdx! TdxTdiDispatchCreate + 0 x 213
  8b31b638 822c1fd3 89bbe960 a50c5b48 a50c5b48 nt! IofCallDriver + 0 x 63
  8b31b688 82426ce1 a 697985, 9 a8e5d364 89b4a3d0 nt! IofCallDriver + 0 x 63
  8b31b758 8244c3cf 89b4a3e8 00000000 a8e5d2c0 nt! IopParseDevice + 0xf61
  8b31b7e8 6 00000000 00000240 nt 8b31b840 824240c! ObpLookupObjectName + 0x5a8
  8b31b84c 82425bc3 8b31ba98 00000000 90e82400 nt! ObOpenObjectByName + 0x13c
  8b31b8c0 8242c51d 8b31bad8 8b31ba98 02000000 nt! IopCreateFile + 0x63b
  8b31b91c 90fcf5de 8b31bad8 8b31ba98 02000000 nt! IoCreateFileEx + 0x9d
  8b31bb60 90fcd1da b2e767f0 a5087508 00000016 afd! AfdTdiCreateAO + 0 x 565
  8b31bbe4 90fd5040 84f3893c 89bcc0f8 8b31bc0c afd! AfdBind + 0x2e3
  8b31bbf4 822c1fd3 89bcc0f8 84f38860 84f38860 afd! AfdDispatchDeviceControl + 0x3b
  8b31bc44 824525e5 84f37130 84f38860 84f3893c nt! IofCallDriver + 0 x 63
  8b31bc64 82452d8a 89bcc0f8 84f37130 03e7fb00 nt! IopSynchronousServiceTail + 0x1d9
  8b31bd00 8243ca5d 89bcc0f8 84f38860 00000000 nt! IopXxxControlFile + 0x6b7
  8b31bd34 8225da1a 00000464 000002e4 00000000 nt! NtDeviceIoControlFile + 0x2a
  8b31bd34 77069a 94 00000464 000002e4 00000000 nt! KiFastCallEntry + 0x12a
  00000000 00000000 00000000 00000000 0x77069a94 03e7fc30

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Mpfp + 7482
  90f18482? ???

  SYMBOL_STACK_INDEX: 1

  SYMBOL_NAME: Mpfp + 7482

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: Mpfp

  Nom_image: Mpfp.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 48445e60

  FAILURE_BUCKET_ID: 0x8E_Mpfp + 7482

  BUCKET_ID: 0x8E_Mpfp + 7482

  Follow-up: MachineOwner
  *----------------------------------------------------------------------------------------------------------*

  Guys do you have an idea what could wrong? Or how world you this problem?

  Any ideas would be welcome. I'm starting to get very frustrated after 3 days in the problem... Thank you very much!

  * Niter *.

  Hello

  I agree with Luke. It of really impossible that this error would be caused by one of the tools updated Toshiba.

  I see in your post a few notifications on DivXsm.exe which is placed in the system32 folder and Skype.exe.

  In my opinion, there is a compatibility issue with 3rd party applications that are installed on your laptop.
  I have no idea why this has happened after the execution of some updates, but it seems that the system has been confusing upward.

  As suggested by Luke, you could start the recovery using the Toshiba HDD recovery option.

  Check it!

• Boot failure after update BIOS on T110ii

  I've just updated my BIOS on my T110ii (from 1.1.1 2.8.0) (because I've been doing a few crashes which must be fixed by firmware updates intel).

  However, after the update, it does not start and displays the seeing '3' with no output vga or ipmi diagnostic.

  The sequence is:

  * 3 diagnostic lights

  For a few moments 1 and 4 light as well, and fan goes to rpm max

  * Then only 3 stays on and the indicator of the health of the system flashes orange.

  The documentation suggests it is failure of CPU, but this seems very unlikely given that it was before the update of the BIOS.

  I tried to clear the NVRAM and disconnect everything I can from the motherboard, but it does not help.

  Is there anything else I can try?

  Are there known issues with the upgrade from 1.1.1 to 2.8.0? (I couldn't see everything in the documentation).

  I found some other threads where people have had systems that no longer start after updating the bios, so I wonder if there is an underlying problem.

  JimmyHo.

  The question wasn't just update the BIOS, it is to jump from a large number of updates. The people you see have reported the update problems that were often due to jump a lot of updates, including updates listed as Urgent. As each of the updates to the BIOS relies on the last, jump if you can lose substantial parts updates of BIOS. With going from 1.1.1 2.8.0 that you jumped 11 or 12 updates, so unfortunately it seems that the BIOS is now corrupt, which would require to replace the motherboard.

  I would like to know if this helps, although it is not what you were eager to hear.

• Satellite L50-B-16V - Starcraft 2 performance decreased after update BIOS?

  Hello

  I played Starcraft 2 for awhile on my Satellite L50-B-16V using average settings quite fluently, however, now the computer's performance has worsened considerably. Framerate decreases with the increase of number of units in the game, in the end that I get framerate as images 1 / 3 sec, even low settings.

  The only thing that has changed since the game worked fine, was updated to BIOS to version 2.0. Could it be the cause of the problem? And if so, is it a safe way to downgrade the BIOS to 1.9?

  Thank you.
  Karel

  Hello

  The BIOS update should not affect the performance of the game.
  But after the BIOS update you should definitely take the default settings of the BIOS (by pressing F9 in BIOS). Then save the changes and exit the BIOS.

  In addition, you must check the AMD/ATI settings in the ATI Control Center.
  As I m not wrong no you can increase the performance of the GPU but of course, it would increase GPU s heat dissipation and temperature s notebook would be upward.

• Satellite L300 - dead after update BIOS!

  Hello!
  I had a problem with Windows XP, so I decided to update the BIOS. After update, I got 3 lines of errors. After the reboot, nothing appears on the scree! I have toke off the power to the battery and the power cable for some time, I had taken only one cable, but still nothing! No beeps, some noise of hard/dvd disc on begging. Can someone advise?

  Thanks in advance!

  Thom

  Hey Buddy,

  It seems that the BIOS is damaged and it must be reflashed to an authorized service provider. This is a delicate procedure so these tools can t be downloaded and are only available for the FSA. On the Toshiba site, you can find a list of all FSA. Simply contact the closest in the country and ask for help. Guys will help you best possible
  However, this forum can help you:
  www.theeldergeek.com/forum/index.php?showtopic=21209