Inspiron 6000 - no LCD display

Similar Questions

• INSPIRON 6000 - display faded considerably (very low light)

  I have Inspiron 6000 and suddenly my LCD is very low brightnss in the display. When I turn on the laptop (on battery or AC) I see the "XP" logo for 5 seconds and it goes well in the colors red and black and it goes very low (very low) and it becomes difficult to see the (nearly empty we can tell when you have any white background you can tell that something is the display). I used FN and ARROW to ensure that the brightness is high, and when I join this laptop for external monitor works fine on external monitor so hardware or operating system is ok but I couldnot find what could be the problem. If it's the LCD is if I can replace the LCD and how much it costs and where I can buy?

  Thank you

  Mukesh

  
  

• I need the video/display drivers for my Dell Inspiron 6000 with Windows 8.

  I need the video/display drivers for my Dell Inspiron 6000 with Windows 8.  Laptop is the Intel Pentium M processor 2.00 GHz RAM, operating system, 32-bit on x 86.  My resolution is not at the right level and videos have hard play.

  I went to the ATI site and when I try to download their drivers, they will not be installed because they do not recognize the Windows 8 operating system.  The site of Dell's Windows XP operating system.
  Thanks for any help.
   
  [Moved from comments]

  Resolved - finally

  2 essential steps
  1 https://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_179256&isLegacy=true#Issue5
  Reconstructions of Dell should be loaded in a particular order until the drivers are installed, that is to say the controllers then the drivers for the chipset and resolution etc. They are specific to this.
  then;
  2 CharlesGrimes comment '... ". searching on my computer for the Dell under the old windows files and the old drivers were loaded. "I had tried this but not good. So went into a ghost of Dell image when the resolution was good on Win7, recovered files in windows/System32, which has old drivers. Does the update in graphic cards [Device Manager] driver and manually looked through above the files recovered from previous instal win7 and YES they charge this time.
  Oh what a relief to have a higher resolution. Experience had taught me how snappy Win8 is, I picked up a shortened bunch of ways to circumvent the operating system, and it is growing on me. WIN8 Pro works best on this old machine than its original Home XP and Win7.
  Thank you Carlos and others for your info that led to my positive resolution.

• Inspiron 6000 video loss

  As a favor to an old friend, I offered to find what might be wrong with his Inspiron 6000. I have experience w / Mac and unix for > 20 years, IBM ThinkPads and others for perhaps a dozen years, but nothing specific to Dell.

  My observations are that while the disk activity and the LED indicator models seem to indicate the successfully started Windows XP (Home) in normal or safe mode LCD display has a resolutely red/violet tint which, in no time, returns to the normal color rendering and appearance, but then disappears completely. No distortion, lines, something like that, the video just give up entirely.

  This was easily observed when I used F8 to select Safe Mode boot. The second time I tried it, the screen of choice for startup type appeared only briefly and then disappeared before I had a chance to choose anything. Clearly, the display should stay until a choice is selected or a much longer period. It looked like both a total loss of the video decreases every time I tried something, this is the first time with a system of 'cold' is longer than subsequent attempts.

  So I think it's the backlight which is a failure, but I'm not totally convinced in this analysis.

  Estimates on the cost of replacing new lighting in an Inspiron 6000? The owner of this machine use exclusively for IM, web surfing, etc. and has no data in the form of documents, music, email, or anything else that should be saved or preserved. My first reaction was that she should simply get something new.

  Your comments appreciated with an open mind.

  
  

• Inspiron 6000 connect only in safe mode

  Hi I have a very complicated problem with this dell inspiron 6000 would initially connect to the internet fine and now connect only in safe mode with networking support.

  Windows XP pro, all updates and the drivers installed and the latest drivers for the hardware as well.

  I am connected ATM threw a wired router with the onboard broadcom 440 when in normal mode, I get a DNS error and I am in safe mode without error LOL. I ran ipconfig with each listed switch.

  It is setup exactly the same thing in normal mode as in trunk then yes time for a punt and hope for a field goal.  nothing has been changed any software added recent updates installed were the 8th of this month. It comes from spending a couple of days.

  I used the winsockfix corrupt but also removed all the network hardware in normal conditions and then restarted in safe and removed there as well. Following is the display of the ipconfig command.

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Misty > ipconfig/all

  Windows IP configuration

  Name of the host...: mistysdammit
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: hsd1.or.comcast.net.

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. :
  ... Description: Intel (r) PRO/Wireless 2200BG Network
  Connection
  Physical address.... : 00-15-00-1B-73-0E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... Autoconfiguration IP address: 169.254.156.42
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :

  Adapter Ethernet Local Area Connection 3:

  The connection-specific DNS suffix. : hsd1.or.comcast.net.
  ... Description: Broadcom 440 x 10/100 integrated Cont
  roll
  Physical address.... : 00-12-3F-E6-C1-E6
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.101
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 68.87.69.146
  68.87.85.98
  Lease obtained...: Wednesday, April 23, 2008 06:16:41

  End of the lease...: Wednesday, May 14, 2008 02:16:41

  C:\Documents and Settings\Misty > ipconfig/all

  Windows IP configuration

  Name of the host...: mistysdammit
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: hsd1.or.comcast.net.

  Adapter Ethernet Local Area Connection 3:

  The connection-specific DNS suffix. : hsd1.or.comcast.net.
  ... Description: Broadcom 440 x 10/100 integrated Cont
  roll
  Physical address.... : 00-12-3F-E6-C1-E6
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.101
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 68.87.69.146
  68.87.85.98
  Lease obtained...: Wednesday, April 23, 2008 06:22:23

  End of the lease...: Wednesday, May 14, 2008 02:22:23

  C:\Documents and Settings\Misty >

  now, you'll notice the wireless is on a different dns so I disabled it because I do not use home wireless. I can still connect if its active but only in safe mode.

  So in conclusion, I hope that im missing an obvious problem and that people will notice it for me until I break a toe to try this investment option.

  
  

• Satellite M40-265 LCD displays the image complete but crushed

  Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

  When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

  When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
  Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

  Starting in safe mode is possible to use a display fullscreen on external

  Hello

  The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
  I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
  In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
  I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

• Portege R100 and WUXGA(1920x1200) external LCD display

  I bought Dell 24 inch wide LCD display.

  I thought that my portege R100 can support the resolution 1920 x 1200 because its maximum resolution is 2048 x 1536, but it's not. TT

  Graphics chip is trident cyber xp4.

  I already tried to use software PowerStrip, but it did not work for the chipset graphic trident.

  Is it possible that I can use the resolution of WUXGA(1920x1200) using my portege R100 as regestry change or what ever?

  Hello

  I found the info that 1600 x 1200 is a resolution supported max for Portege R100. As much as I know there no way to change this through any changes to the registry. As you know the performance of the graphics card can not be changed.

  Good bye

• Satellite 1800: Fault pin plastic LCD display!

  "Look at the LCD display screen. If you can see a small image on the screen, backlight fluorescent display screen can be disabled. Light of a flashlight directly to the screen will make it much easier to see if or not there is a screen image actually present, but not turned on. On most Toshiba laptops, there is a small plastic or metal pin near one of the LCD cover hinges. When the display lid is closed (closed), this PIN is pressed against an internal switch that turns off the backlight, saving battery power. You can turn on the backlight by pressing repeatedly on this PIN. The normal screen image will be then suddenly appear or reappear. »

  It's a recommendation, I took for my Satellite 1800 Toshiba help suggestiuons... However, when I type the PIN, she don't flick the backlight on and then turns off very quickly. I can't stay!
  It drives me crazy and I can't find anywhere on the net wherer this fault is mentioned.

  The problem has gradually worsened over time. I used to be able to move the angle of the screen and tapping the PIN to operate. But now, I don't have a chance so he could stay forever! I think I have to open the screen and check if the PIN needs to re - solder or perhaps the FL lamp wire is pinching somehow...

  I do not know... I am far from being a geek... also... What does FL stand for?

  PLEASE PLEASE PLEASE HELP.

  Hi Liam,

  The description of your problem suggests that the FL inverter has failed. It is a component that provides the background lighting for your screen.

  Normally when you close the PIN you are talking about depresses a switch that turns off the UPS FL. If you can get a momentary illumination of you LCD when you prod this switch I think the inverter FL itself is defective.

  The bad news is that you will need to take your laptop to a partner of authorized Service for repair. The good nes, it's that the FL inverter is not one of the more expensive items.

  Kind regards

• Dell Inspiron 6000: Wireless driver

  I'm looking for driver wifi for a Dell Inspiron 6000 running Windows 7, 32-bit. It's a Systems Conexant RD02-D110.

  Hello:

  We will have to try some creative things to get these devices to work because your laptop was not designed to run Vista or W7.

  No matter how it is, your laptop will not be able to run Windows Aero because the graphics card does not meet the hardware requirements.

  First the graphics... Download and run this driver.  You will probably get an error not supported operating system.

  Conclusion of any windows error.

  FTP://ftp.HP.com/pub/SoftPaq/sp34501-35000/sp34749.exe

  Go to Device Manager and click on the video controller needing drivers.   Click on the driver tab, click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34749.

  Make sure that the include subfolders is selected and the driver should install.  Then restart.

  Audio: You will have to hope that the audio driver XP works page for the support of your laptop.  Try to install manually if auto installation does not work.   If navigating to the folder of the driver does not work, let me know and I will give you further instructions to select the specific file to install.  I think that this issue goes into C:\Dell from what I remember, when I got a computer Dell laptop.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=YKWJ1 & osCode = WW1 & starts = 2731108845 & languagecode = in & CategoryID = to the

  Wireless.  This will require a manual installation.  Download and unpack the first file in a folder.

  Navigate to the folder decompressed from the network controller using the same procedure that you did for the graphics.

  https://Downloadcenter.Intel.com/download/15798/Intel-Pro-wireless-drivers-only-for-Windows-Vista-

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• The use of laptop Dell Inspiron 6000 with D - Link DIR - 615 router and a Wireless N adapter, but showing the G signal

  I have a Dell Inspiron 6000 laptop and I use a router D - Link DIR-615 and a Wireless N adapter, but when I checked my settings, I received only a G signal. What can I do to get a N signal?

  * original title - how will I know if my cell phone is compatible? *

  The chipset WiFi the only information that I could source on the Inspiron 6000 ranked either the Dell Wireless 1390 802. 11b / g card mini or Intel Pro/Wireless 2100 802. 11 b / g mini card.

  None of them is compatible with N.

• No active devices mixer & output audio on a Dell Inspiron 6000 device, I disabled it, when he had an exclamation mark on the device in Device Manager

  The aircraft disappeared after I disabled it, where can I find, he ain't not in Device Manager under sound devices

  You can find it on the Drivers and Utilities CD you received with your computer. You can also download it from Dell downloads if you do not have the CD. When you access Dell downloads they will ask for your Service tag number that you will find at the bottom of your laptop. If she isn't here the download site can scan your computer and find it, even if it is not totally nessary, you can simply enter Inspiron 6000.

• No sound on my Dell Inspiron 6000 when I updated to Windows Vista Ultimate

  original title: no sound on my Dell Inspiron 6000 went I've updated for Windows Vista Ultimate Edition

  I tried Microsoft solve this problem, that don't work, I want to Dell website and download the diver who don't work not "so I wonder if I con help."

  Hello

  Step 1: Try to update the drivers for sound card via windows update.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2: Download windows XP drivers for sound card and install it in compatibility mode.
  Reference:
  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WW1&OSL=en&SystemID=INS_PNT_6000&CATID=-1&impid=-1
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-program-compatibility

  You can also try to contact Dell support for assistance on this issue team.
  http://en.community.Dell.com/
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen

• Dell Inspiron 6000 - connects to the router Linksys wirelessly (?)

  Dell Inspiron 6000 - connects to the router Linksys wirelessly (?). Always done, now just stopped.

  Ideas: Laptop does not connect with the wi - fi router. Never of hade a problem before.

  Hello

  ·          What is the exact error message or code that you get when you try to connect to the wireless router?

  ·          You are able to connect to the internet via wired connection?

  Am adding this link, for your reference.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Please provide us with more information so that we can help you in a much better way.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound Dell Inspiron 6000

  Its not recognized__ map

  I have a card audio sigmatel in my Dell inspiron 6000.  I have had no sound since I installed Win 7.  Used the program of the Upgrade Advisor, which stated that all my material was good.  Dell drivers are obviously only good for XP.  I know this is an old machine, but does fine with Win 7 and I would like to tweak a bit more life of this machine.

  Hi Snkdrvr93,

  I tried to check on the Dell website if they have updates drivers for Windows 7 and has been unable to find it.

  However, I would suggest trying to download the Windows XP driver and try to install the drivers in compatibility mode and check if it works.

  To install the drivers and the program in compatibility mode, follow these steps:

  1. open the program compatibility Wizard the by clicking the Start button, click on the Control Panel, clicking programs, and then clicking "run programs for the previous version of Windows.

  2. follow the directions in the wizard.

  If you are unable to install a program, insert the installation for the program and, using the wizard disc, go to the drivers Setup file, usually called Setup.exe, Install.exe, or something similar. The wizard is not designed to work on programs that have an .msi file name extension.

  To change compatibility settings manually for a program, right-click the program icon, click Properties, and then click the Compatibility tab select Windows XP SP2 and select the run as Administrator option. Click on apply and Ok. Try to install the program again.

  Access the link below to learn more about how to make older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the steps above do not solve the problem, yo umay contact Dell and check whether they have other updated for the sound card drivers.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.