Inspiron N5110 integrated webcam not working not

I bought Inspiron N5110 last week. Right from the first day, I could not use the built-in webcam with Dell Webcam central or the Skype software. When I open Dell webcam central, it displays this message down 'no supported Webcam connected '. Even in Skype, when I click on the video, nothing appears. I uninstalled and reinstalled dell central webcam, but no use. I also uninstalled the driver for the webcam in device-> imaging devices Manager and reinstalled. But it's always the same. I also could not see driver for webcam my computer model in the Dell Web site. support for drivers has the same problem?

I have a similar problem, but I think that the issue could be with the Dell Webcam Central.  I have uninstall and reinstalled the program, then also installed new updates for it.  I deactivated and activated the device.  I've uninstalled and reinstalled the driver.  I've updated the driver.  I downloaded a new driver, based on advice from another forum (includes a new version as updates).  Still nothing works.  However, I got the camera worked briefly at some stage tonight after one of my moments of "Reinstall driver".  Not a lot of fun.  Spending a few hours on Skype to my family (I moved recently interstate) attempt to fix then to see them and have them only hear me.

Any ideas?

Otherwise I'll be in him passing on Dell.

Tags: Dell Laptop

Similar Questions

  • Inspiron 1525 integrated webcam not detected when the laptop is open, but works when it is closed

    I see that the webcam works (blue light is on I can open less then to halfway and see the desktop and a part of the computer in photo. then open more than half and get error webcam not detected.)

    Help please

    Hello

    Check with Dell technical support, online documentation and drivers and their known forums
    problems and solutions.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/
    -------------------------

    Help generic camera:

    Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
    on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
    is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
    will update the driver stack.

    Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
    software (if not more recent get the same).

    Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Then let windows updates on however prevent loading of drivers who are often older than the
    those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
    really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Reference Dell inspiron n4050 integrated webcam not working do not.

    I'm already installed Dell Webcam Manager. But when I tried to capture an image, he said "no webcam driver supported detected. Please install the webcam driver using the dell Resource CD, and then restart the webcam Center. "

    My unit model is DELL INSPIRON N-4050 and installed 64-bit Windows 7 Ultimate edition. I did not come with drivers CD and I do not know where to download the driver for the webcam it is. I also make troubleshooting and checked the Windows Device Manager, it shows that the built-in Webcam is installed under imaging devices, and the driver is up-to-date.

    Hello irfan mir.

    Welcome to the community,

    With Windows 7 webcam driver should get installed automatically. It might be the Webcam Application that does not work properly. Try to uninstall the Webcam of the System Manager (Control Panel, programs and features, select Manager of Webcam, click on uninstall).

    Restart the system and install the application Webcam Central from this link below:

    www.dell.com/.../DriverFileFormats

    Let me know if you need more help,

    Thank you

  • Dell Inspiron 15r integrated webcam not working not properly.

    Just to have the monitor of my touch screen replaced because on my new laptop because the motherboard so that it was fried and does not recognize the touchscreen. Now when I try to use the webcam, it displays the image very well, but if I try to you can take a photo or video, an error message appears saying 'something was wrong everything trying to take this picture. Please any suggestions would be helpful.

    Well the Central webcam works and take pictures now, just a little differently than the desktop of windows 8, but it will work. Thank you!

  • Dell Inspiron 580 integrated webcam not detected.

    I moved recently and have not had the time to use my webcam. Yesterday, when I tried to use it, he would not come. Says please connect device supported.

    I moved recently and have not had the time to use my webcam. Yesterday, when I tried to use it, he would not come. Says please connect device supported.

    You must download and install the driver for the webcam and the application of the Dell Support Site.

  • integrated webcam not working not not in windows8

    my laptop is dell inspiron 15 with preinstalled windows 8 that has been activated,

    My integrated webcam and photo app worked very well. Suddenly one day, my photo app showed that 'connect a camera' and my device under devices Manager showed no integrated webcam Imaging.

    I tried and installed photo app and updated, tried this and that and did not know what I did, my camera started working and Device Manager showed a webcam integrated

    Now it's the same thing. I don't know what to do. If this thing happens again and again, what to do.

    How it can be corrected. pl help

    Hello

    Thanks for your help,

    but the problem is solved, do not know how

    I tried the update of the camera tool, maybe it helped

    next time that happens, I will try the suggestion you gave (reinstall the driver)

    Thank you

  • Integrated webcam not working only not with Skype in Windows XP.

    Original title: webcam on compaq presario cq60

    I have a compaq presario CQ60 with integrated webcam.  I have tried Skype and can't find the webcam, and it is not automatically kick in even if it is set to video.  Can someone tell me where the webcam can be localized.  Thanks, Denise

    Hi Denise,

    Thanks for the updates.

    Please contact Compaq support for assistance at the level of hardware problems.

    Please get back to us with the State of the question.

  • Inspiron N5110 Bios is not supported for Windows 10

    I have a 3 years old Dell Inspiron N5110 i5 / 8GB ram/Nvidia with Windows home Premium. Very satisfied with its performance and quality. Today, I tried to book the copy of Windows 10 app Windows10 get. After struggling to make the visible icon in my toolbar, I clicked to the reserve and came up with this message...

    I'm running on the last BIOS A11, recent windows updates and drivers and still get it. I have 2 older laptops to about 3-4 years of my Dell and both qualified for Windows 10. Is it me or are there other N5110 users get this? Is there any other BIOS fix for this? Is there an official solution from Dell on this problem? Is there a possibility Dell remedied before July 29?

    Hello

    Thanks for joining us. Windows 10 is still in development stage, we ask you to wait for the official release. Make sure that your machine is up to date with Windows updates. We are looking in the message.

    Thank you

  • Integrated Webcam not working after windows 10 shots

    Hello

    Moved yesterday to win 10 and after the switch I had no nvidia drivers and webcam does not work. I managed to update the drivers nvidia and its all fine but I still have built-in Webcam in Device Manager as was not due to no drivers.

    Noticed while he was trying to use the camera on Skype. It works just as it isn't here. Tried looking for drivers and topics but have not found anything either and resembles other odnt present the problem. Everything was fine before installing windows 10.

    I myself Alienware 17 x 2013 Mid

    No idea how to solve this problem? I have nothing now

    Hi Narno06 / Angelosheart.

    Camera on Dell Inspiron systems has native drivers for the Windows operating system. I suggest you to update the BIOS and Chipset driver on the system. Please enter your service tag # on the link below, select the operating system, then download BIOS BIOS section, then driver chipset chipset system section and install it in compatibility mode.

    http://Dell.to/18r60nI

    Please let me know if it helps.

  • Integrated webcam not working not

    I just got a new Pavilion m6-1045dx (Windows 7 64 - bit operating system) last month, and the other day my built-in webcam suddenly stopped working. Turns off the video stream, and subsequent attempts to reactivate it (from the chat program that I ran) led to the video immediately shut off again. The light next to the camera lens (which indicates it's on) goes out as well.

    I opened Cyberlink YouCam (software pre-loaded laptop to run the webcam), and nothing in the window that normally indicates the video stream. Rather than an empty box or error message, it's like there's a hole in the program. the box shows all programs running in the background, or the bureau, instead of displaying the video stream.

    I checked the settings of Cyberlink YouCam; It allows me to select my webcam (HP TrueVision HD) and configure the options, but there is no change when I save it. I tried to upgrade the software to the latest version, but the problem persisted. Uninstall and reinstallation of the original version has not changed anything. I tried to restore my system to a recovery point before the problem, but nothing has changed. I did a scan of health without any detected problems. I even tried to restore the system to its factory settings, but it still has the same problem. I just uninstall the version of Cyberlink YouCam that came on the phone and he reinstalled from a new installation file downloaded from this site, still to no effect. I checked the webcam troubleshooting page for my model, but doing given has not changed anything. Or any other solution found on other sites.

    Can someone tell me what to do now?

    Hello Slater13. I understand that you are having problems with your built-in webcam. Is this correct?

    You have covered most of the normal steps to solve the problem if it's associated software (uninstall/reinstall, restore points and even a resumption) without modification. This, for me, highlights a hardware problem. I made a post on the problems of webcam recently you can see here. However, you have tried these steps. Go ahead and try the hard reset of the laptop. Here are the instructions.

    1. Click Start, type "Device Manager" and press ENTER.
    2. Expand the "Imaging Devices" section and uninstall the webcam.
    3. Shut down the laptop.
    4. Remove all external devices.
    5. Remove the battery and AC power.
    6. Hold button power for 10-15 seconds.
    7. Replace the battery and AC power.
    8. Start Windows and go back to Device Manager.
    9. Select 'Action' and then 'search for material changes.
    10. Allow Windows and install and check the functionality.
    11. Display the result.

    Due to the number of alternatives that you tried if it does not, I am convinced that this book will have to be repaired. In this case, I'd say contacting HP Support directly. If you are in the United States / Canada you can call to the 1-800-474-6836. If you are in another region of the world, you visit HP's Support around the world to find the coordinates for your region.

  • Compaq Presario A931NR computer laptop integrated Webcam not working not

    Original title: laptop Compaq Presario A931NR with a built-in Webcam

    I have a laptop Compaq Presario A931NR with a built-in Webcam that I can't go to work. I tried to download the Cyberlink Cam software that came with the laptop and he always tells me that the Webcam feature is not on my computer. He wants me to download the device to be detected, but I can't figure how to get it. I went through the Device Manager, all programs, I redownloaded everything and updated everything and the driver is just... disappeared. I don't know what else to do... Help?

    Hello

    You can check the support of HP at following link and try to install the Windows Vista drivers for the webcam and checking.

    Downloads of software & driver - Compaq Presario A931NR Notebook PC

    You can also try to launch the Fixit material and check.

    Hardware devices do not work or are not detected in Windows

  • Integrated webcam not working only not with windows 7 on XPS L702

    Looking at the Device Manager there is no "imaging devices".  Online research suggests windows should the driver and install it automatically, so it doesn't seem to be a way to manually install the driver.

    I tried to boot a linux live cd and the webcam successfully, so the webcam is definetely work.

    Reinstall Dell Webcam central has no effect.  Note that the device used to work and I have not reinstalled the operating system since many updates windows however.

    Jon

    Jon,

    Do a system restore point.

    Start, Control Panel, Manager of peripherals, Bus USB controllers

    Uninstall all the USB root hubs and restart the computer. When you connect, the new hardware wizard will reinstall everything. Please be patient.

    Now see if the work of AI webcam.

    Rick

  • Reference Dell integrated webcam not working do not. I need webcam drivers

    previously, he wotked good.when, I recently opened Skype. "Undetected Skype no matter what webcam" this message came. Then I went to the Device Manager is not listed in my devices.total of imaging, imaging devices itself option missed.later I added it by action > add legacy hardware. now, it's showing as unknown device.

    I click on this > driver.but update selected, that is to say the driver is up to date. MY WEBCAM DOES NOT WORK. I DON'T HAVE THE DRIVER FOR IT.

    PLZ PLZ HELP ME. IAM USING THE LAPTOP DELL VOSTRO 3400 & OS IS WINDOWS 7 32-BIT

    previously, he wotked good.when, I recently opened Skype. "Undetected Skype no matter what webcam" this message came. Then I went to the Device Manager is not listed in my devices.total of imaging, imaging devices itself option missed.later I added it by action > add legacy hardware. now, it's showing as unknown device.

    I click on this > driver.but update selected, that is to say the driver is up to date. MY WEBCAM DOES NOT WORK. I DON'T HAVE THE DRIVER FOR IT.

    PLZ PLZ HELP ME. IAM USING THE LAPTOP DELL VOSTRO 3400 & OS IS WINDOWS 7 32-BIT

    It is a question of Dell.  Support and drivers for hardware devices is hardware manufacturer.

    Ry Ttheir forums.  You can also get this driver downloaded/installed:
    http://ftp.us.Dell.com/Monitors/Dell_SX2210-Monitor_Webcam%20SW%20RC1.1_%20R230103.exe

  • Integrated webcam not working only not on the new Sony Vaio laptop

    Hi, I just bought a Sony Vaio laptop and the built-in webcam does not work. He comes back with a message saying that the application will not open as side by side configuration is incorrect. I tried to change the compatibility to Windows program, but it still doesn't work. Any ideas?

    Your Emily.

    Hi, I just bought a Sony Vaio laptop and the built-in webcam does not work. He comes back with a message saying that the application will not open as side by side configuration is incorrect. I tried to change the compatibility to Windows program, but it still doesn't work. Any ideas?

    Your Emily.

    With this part, '... just bought a Sony Vaio laptop... "I'm going to point out what is obvious and suggest that contact Sony as soon as POSSIBLE.  Supported hardware (webcam is material) and all the software that allows the hardware to communicate with the operating system you choose is the manufacturer of the equipment.  :-)

  • Advent modena computer laptop integrated webcam not working not

    WEBCAM WON'T TURN ON IVE TRIED HOLDING FN AND F7 TOGETHER BUT IT STILL DOES NOT WORK? IT KEEPS SAYING NO FUNCTION IT WORKED BUT WHEN I HADN'T USE MY LAPTOP WHILE I WAS ON VACATION!

    Hello

    1. What is the model of the computer you're using?
    2. What is the exact full error message.
    3. What program you use to access the webcam?
    Method 1:
    Update the drivers for the webcam and checking. Check out the link and follow the steps.
    For more information, you can check this link.
     
    Method 2:
    Perform a clean boot and check if the problem occurs. Check out the link and follow the steps.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

     
    You can refer to the manual of the laptop provided by the manufacturer of the computer and read the section on the webcam.
    You can also try and contact the manufacturer of the laptop computer for help on this issue.

Maybe you are looking for

  • Problem with the photo app

    I have can´t open my photo app, it just says: "library of closing". What can I do to fix my problem and review my photos?

  • Profile of the home screen layout

    Hello I just want to create a layout of the home screen setting profile Builder 2 for iOS 9.3. But I have a question on connect. The field 'Pages' are not valid. Here is my demo profile: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "

  • Pavilion dv9640us: diskless system repair

    I need to do a repair system, but do not have a system disk

  • Tecra A8 PTA83E fan problem: SOLVED!

    As I say in this post: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21776, my tecra A8 fan still works at high rpm, and the service is unable to solve my problem.Now, the problem seems to be FIXED!I downloaded this update to

  • How can I move my contacts from one list to another address?

    My emails have been high plundered so now I need to pass my contact list to the new address, I created a new e-mail address.