Pavilion dv9640us: diskless system repair

Similar Questions

• HP Pavilion series p6000: Windows 7 system repair disc

  is it possible to get a repair disc without having windows 7? mine broke and I don't have an ERD. the boot sector crashed on me, so I kinda need a. im using right now it works on xp. not bad, but this computer is slow

  If you have a friend with Windows 7, a repair disc can be done.  There used to be a download for the system repair disc, but it was taken down, so you need a working Windows 7 PC group to make.  A Windows 7 installation disc can also be used - boot the disk and choose repair instead of the installation of the screen after the first screen.

• HP Pavilion 13x2pc - FOA05AV: System here Unhandled Exception

  Windows loaded 10 last fall and system works fine up until yesterday, it came with the blue screen 'System Thread Exception unhandled' without additional error message.  System tried to auto repair did not work.  I tried the PC reset option - returns with the error cannot reset, I tried the system restore - no available on PC restore points. I tried Startup Repair back loop of automatic system repair.  Modified startup parameters to activate the secure, but it will not start in safe mode back to auto repair look system. Method of HP tried to pull the battery to reset the start but the HP Pavilion 13x2PC is a removable and does not give an option to access and draw on the battery.  Does anyone have any suggestions?

  Hi @Oldman7,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I understand that you get a blue screen with the error "Unhandled Thread Exception system" without additional information.   He launched the auto repair, but it does not work.   You do not have to use restore points and you were unable to do a reset. You have also failed to start in safe mode.

  Here is a link to help you get into safe mode.  HP computers - Windows Safe Mode (Windows, 10, 8)

  As you have not been able to do a reset, I suggest you try a refresh first.  If this is not possible, then do a recovery.

  How to update Windows 10 (from tenforums.com).

  Next would be the recovery.  This operation takes back you to the original operating system.  If this isn't what you want, then you will need to do a clean install of Windows 10.

  Computers HP - perform a recovery of the system (Windows 10) HP  Should you do a recovery there is an option to back up your data to avoid data loss.

  HP computers - restore files that have been supported to the top using HP Recovery Manager (Windows 8)

  If you need to do a clean install of Windows 10, here is a link to guide you.

  How to do a clean Windows 10 installation (from windowscentral.com)

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the Thumbs Up icon below.

  Good luck!

• System repair disc creation

  Product: HP pavilion dv6-6145eo

  Operating system: W7 64-bit

  Error message: System repair disc could not be created. The setting is incorrect (0 x 80070057)

  Tried to burn the disc after installing Windows. What's wrong?

  Hello

  If your laptop will not create a system repair disc, here are a few other options.

  1. you can use an other PC 64 bit of Windows 7 to create a CD to repair.

  2. you can download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to properly burn the ISO to a CD.

  Concerning

  DP-

• I can't do a system repair disc

  HP Pavilion p6-2260ea Office runnings Windows 7 just bought from Currys 4 September 2012.  When I tried to do a system repair disk by using the Windows backup and restore program.

  "The disc could not burn verification and may contain corrupted data or be unusable (0xC0AA0007)."

  I tried to turn off my hub and Skype as it seems to be a timing issue.  This time, I got ab "unknown error (0x80004005)".

  I'm tempted to try again after you perform a "clean boot", but am worried that I am in a network with hub and printer.

  You are the very welcome, Peter.

  Hope you don't either.

• Unable to create point of system restore, System Image & System Repair Disk

  Hello

  I'm on HP Pavilion dv6 notebook, Windows 7 Edition home premium, (Intel core i7, [email protected] Ghz) CPU, RAM (4.00 GB).

  2 days back, I installed kaspersky IPSec 2016.

  After installation of this I started to experience different startup issues as initially I wasn't able to open the application (word, excel) Microsoft, infact I wasn't able to work on any application, even could not shut my system.

  today when I started my system again to check again the question that I was surprised to see that I could access my Microsoft & other applications.

  As a preventive measure, now I want to do system restore, disk image point & system repair disk but unfortunately, I am not able to do this.

  Here are the problems I face to create above.

  1 system restore point - specified error as ' restore point could not be created for the following reason: a volume shadow copy service component has encountered an unexpected error. " Check the event log applications for more information (0 x 80042302)

  2. System Image disc - error indicated as "Windows cannot find device backup on this computer. A volume shadow copy service component has encountered an unexpected error. Check the event log applications for more information (0 x 80042302)

  3 system repair disc - of the errors illustrated as "system repair disc could not be created. The parameter is incorrect. (0 x 80070057).

  Pls advise.

  Thank you for the update from us.

  The message you get may be caused by a corrupted system file. We offer you to perform analysis DISM that can help resolve the corruption of Windows error.

  Let us know how it goes.

  Kind regards.

• HP ENVY m6-1117tx Notebook PC: System repair disc

  I don't have a system repair disc and I can not creat, because it seems I've lost the media player.

  I need help please

  

  I'm sorry that you misunderstood me. Follow the steps please: -.

  Step 1: Download iso Windows 10 from here:- https://software-download.microsoft.com/pr/Win10_1607_EnglishInternational_x64.iso?t=fd790faf-0310-42fa-bf0a-dc805df3451f & e = 1476504729 & h = 08a437b43cf3af38579673435bb13ce0 (ASAP link valid only for the next 12 hours)

  Step 2: Rufus open (or img burn if the dvd is used)

  Step 3: drag your iso page

  Step 4:-click Start

  For your convinience, here are some links for reference:-https://www.youtube.com/watch?v=QC_qKKFYAcc (Rufus)

  IMGBURN LINK:-https://www.youtube.com/watch?v=lizhzDX7-AI

  Click on Bravo or accept as solution if happy.

  Happy to help you @AmreenSanhotra

• Satellite C660 - continues to enter the system repair

  Can someone help me?

  I have a Toshiba Satellite C660. Yesterday, it crashed. When it restarted, it went in the repair of the system and whenever I rebooted, it entered the system repair. Don't know if it is relivant but I get a windown come with drvload.exe back.

  So I did a factory restore hdd thinking this would clearly be the problem, but it didn't. Now I always get a repair system each time I do updates of mircosoft when I restart, more I can't hardly open programs like firefox, add and remove programs.

  I now use a check of HDD to see if I have bad sectors, have also scan mcfee which showed no virus.

  Any suggestions would be grateful because do not know what to try next.

  Thank you very much

  Hello

  > So I did a factory restore hdd thinking this would clearly be the problem, but it didn't.
  That would mean he s no malfunction of the software and the problem seems to be hardware related. HARD drive recovery can restore the original settings of the software box and they are pre-tested by Toshiba. So, theoretically, he could be sector failed HARD drive, RAM failure or something else

  > Now, I always get a repair system each time I do updates of mircosoft
  This would mean that the problem appears only after Windows update or I understand something wrong?

• G6 Pavilion: Pavilion g6 disabled system

  Model-Pavilion g6
  
  Operating system-window7
  
  System disabled
  [95494133]
  
  I need a password (as soon as possible)
  
  Please help me...

  Hello:

  Enter the unlock code...

  20592115

• error code 0 x 80070057 during a system repair disc

  error code appears when I try to do a repair of the disk system, how can we resolve this, steve.

  Follow the instructions mentioned in this article:

  Error (0 x 80070057) trying to make the system repair disc
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/error-0x80070057-when-trying-to-make-system-repair/2a7dfd00-6588-4cbb-9816-f40b13041da4

• Windows XP system repair and commmand prompt still does not

  I'm still having a promblem with my computer. System repair and command prompt still does not. I got a response from Joselbarra, but I can't find the link to meet him. So if you see this here some answers to the questions you asked. My system is microsoft windows XP Edition family version 2002, service pack 3 (although in Add or remove programs there are no size MB next to service pack 3 and all my windows programs).

  I do not have anti virus and have ever since I bought my computer 6 years ago (I know, but I'm paying for it now).

  My /CDDVD player has not worked for about 2 years.

  Windows XP is already installed on my computer when I bought it. The CD only I can find is Microsoft Works 7.

  My problem is that system restore was taking more than an hour to work. Then I disabled my jeanmarie, until it gives me the message that my restore was successful (or not). When I turned it on again it seemed have lost all value files and text processing, user account, microsoft msn password. So I can't access the internet to download anything.

  I tried through the command prompt as Joselbarra suggested. VBScript and jscript regsvr32 succeeded. However I mshtml was not. I had messages that said.

  LoadLibrary ("mshtml"), the failled specified module could not be found.

  No name of the specified DLL.

  use: regsvr32 [/ u] [/ s] [/ n]

  Dllname [/i [cmdline]]

  / u unregister Server

  s silent; dispalay message box

  i - call. Installation of DLLs on optional [cmdline]; When used with / u calls dll uninstall

  As you can imagine, my mind is filled with jargon tenical and I'm not the wisest Please HELP someone.

  Here is the link to your previous topic.

  http://social.answers.Microsoft.com/forums/en-us/xpperformance/thread/4c2402e8-4668-425F-9163-a5b6960dee16/

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• system repair

  Impossible to change the date or month on system repair screen, I put manually the date I wanted, but it also highlights todays date and the custom are loose. I have something virus going on that's why I wanted to come back to fall 1 2010... can someone help me? I'll throw the computer out the window soon!

  all dates that are highlighted in bold / confirming that there is a restore point / available to restore the file system.

   

  But if there is no date highlighted, it may be that there are simply not available to restore points because none were made by the system or by yourself.  However if you did the restore points, then maybe the settings for the system restore function have not changed to ensure sufficient disk space and restore points have been removed or if you incurreda single scenario then the system restore calendar is empty of restore points.  so, if you have made a 12-01-2010 restore point, but is not on the calendar, then is are a few scripts available that can rebuild the blank calendar.

   

  In addition, if you think you have a virus, although you program antivirus did not confirm an infection, restore points and backup can actually restore the infections when they restore system files, even if they are infected system files.

   

  Perhaps, the instability of your system is caused by other things and not an infection.

   

   

   

  
  --
  DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

  .

  "memers83" wrote in message news: cd0613b0-8dfb-4585-90e6-f0ea4cd6bfd2...

  Impossible to change the date or month on system repair screen, I put manually the date I wanted, but it also highlights todays date and the custom are loose. I have something virus going on that's why I wanted to come back to fall 1 2010... can someone help me? I'll throw the computer out the window soon!

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• SFC scanning problems - "system repair pending".

  I'm trying to run a sfc scan and I get the answer "there is a system repair pending which requires the restart ends."  Back to zero does not solve the problem.  How can I fix?  I hope the race said scan will help me solve another problem that has been plaguing me for the last six months - my laptop cannot detect new updates automatically.

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

• the constant loop start: System repair

  Net book showing system repair and has been in this mode for more than 12 hours with no other info that appears.  I can't move to the beginning upward on the computer to try a system restore.  What comp is off, and the return on the system repair same box appears...

  Hello

  You have a problem with Netbooks not having is not a DVD player, to use bootable disks to repair or correct them.

  I suggest you contact the manufacturer of Netbook for assistance.

  They also provided a recovery Partition to reinstall the operating system to.

  F10, F11 or alt F10 are some of the options to do so, according to the manufacturer...

  See you soon.

• When I try to run system repair ffrom originally Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt"

  Original title: when I try to run the system repair ffrom the original Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt" is anyone know the solution for this problem? Thank you, Kelsey.

  The message arrives as soon as I select "repair system" can not find the file on the Windows Dvd.

  Hello

  1. why you try to run the system on your computer repair?

  2. when exactly you receive this error message?

  If you receive the error message while booting from the Windows Vista DVD it means that the file i2omp.sys is corrupted.

  You may need to make arrangements for a Windows Vista disk that corresponds to the same edition, as it is installed on your computer. Later, try to repair the system on your computer.

  How to replace Microsoft software or hardware, order service packs and replace textbooks?

   
  Reference: What are the system recovery options in Windows Vista?

  Hope the helps of information.