Tecra A8 PTA83E fan problem: SOLVED!

Similar Questions

• Tecra A8 PTA83E fan is still running

  I have a Tecra A8 and the fan runs always, always, when I start the laptop.
  The parameters energy saver is battery optimized, but I tried several settings, no changes to this problem.
  Already tried the game still at low speed of treatment (C-States, and many other options to set different) in the BIOS, no change.
  Try to use system (speedfan, nhc) tools, but not detect the conroller of fan, so no change.
  After 1 hour using Intel thermal analysis tool (navigation, writing emails) shows me:
  -ACPI thermal zone: 35 ° C
  -C State: C3
  -Digital basal temperature (two hearts): 29 ° C
  -frequency: 1 000 MHz (CPU T7200, 2 GHz)

  The area thermal ACPI stay at 35 ° C until the time of base reach this temperature 35.
  When I put the level of workload to 100% (two hearts), the maximum temperature of 55-60 ° C running very quickly (within 1 minute).
  The disk HARD sensor (in Everest Ultimate) makes clear, temperature of 25 - 30 c.
  Tried BIOS versions (and not the changes made to this problem): 1.50, 1.60, 3.20 and the new 3.30.
  What's wrong? Why not work the fan control?
  Is there another tool that can control the fan or can help to diagnose (or difficulty) this problem?
  In service centre (in Hungary) has replaced the motherboard (the laptop turns on), the problem exists as of this date.
  I will not go, I have no other 3 weeks to fix this in the service center and I not satisfied with his work, because his "turned eye" on this problem and try no difficulty (very noisy fan after plugging).

  Please someone help me!
  (PS: sorry for my English...)

  Hello

  > In service centre (in Hungary) has replaced the motherboard (the laptop turns on), the problem exists as of this date.

  Well, seems that it started after the replacement of the motherboard.
  So I know it's hard for you to leave your laptop for several days (weeks?) but I put t see any other solution.
  Maybe the DMI must be updated
  So if you want to get rid of this behavior strange fan, you need to contact the ASP in your country

  Good luck

• Tecra A8 PTA83E - installation of package of added value

  Tosiba Tecra A8 PTA83E
  Microsoft Windows Vista Ultimate X 64

  I was unable to install the Toshiba Value added package (vap-vista-1011btn-en) or any version before it. I talked to technical support Tosh for many times and they always promise of customer support will respond to the request, they never do.

  Towards the end of the installation, start the process of "Computational space needs" an error dialog box that contains "ID_ERR_NOTINSTALLVALZ_MESSAGE". The only option available is 'ok' and when this field is selected the installation rolls back and the finishing screen says "The wizard was interrupted before that TOSHIBA Value Added Package can be installed completely".

  I'm, I'm sure you understand, VERY frustrated by this problem. I bought (the very expensive) Vista Ultimate as Toshiba, claim that this laptop is Vista ready and it is quite possible, but the drivers and software provided are not. I also have problems with:

  Bluetooth
  Free config utility
  WinBIOS updater
  Audio driver
  Graphics driver

  I will record these problems from another thread I want to deal with these problems one at a time.

  Thanks in advance for any help being given/offered.

  Hello

  You run the 64-bit version of Vista?

  I m not very surprised that you are not able to install the Package Toshiba Vista added value.
  All the drivers, tools, and utilities are designed for the 32-bit version of Vista!

  To my knowledge the drivers 32 bit don t run on Vista 64-bit operating system!

  Regarding the error ID NOTINSTALLVALZ ERR MESSAGE.
  It seems that the BIOS update could solve this problem.

  This was reported in different threads here in the Toshiba forum!

  For example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20471&MessageID=75256
  or
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21232&MessageID=78197

  Greetings

• Tecra A8 - cooling fan runs constantly

  Have a new Tecra A8 (PTA83E) with core 2 duo 1.66 and Vista professional. I try some power management settings, but fan still works at low speed, it never stops even if the laptop is idle and cold.

  Is this normal? On my old laptop fan works only if necessary...

  Hello

  Fans are running because the laptop has to be cooled.
  Believe me; the laptop would not cold if the fans would go not constantly at the lower speed.
  I think it is? s better if the fans are running constantly, gently and slowly at low speed as sometimes loudly and jerked.

  What do you think???

• Network Tecra M9 Vista installation problems

  Hello

  Have just got a Tecra M9-136 that I try to install with the English version of Vista Business.

  Vista refuses to connect to several websites:
  Update.Microsoft.com
  www.Microsoft.com
  www.Intel.com
  LiveUpdate.symantecliveupdate.com

  The links below works well even if:
  support. Microsoft.com
  www.Dlink.com
  www.LinkedIn.com
  www.VG.no
  www.Aftonbladet.se

  Someone else who have encountered this problem?

  Update;
  Found an incompatibility between Vista and my router DLINK-804 for dns lookups. Now I wonder just if Vista or DLINK is correct. Problem solved.

  KR,
  Björn? A¶RN Hasselberg

  Post edited by: bhasselberg

  > Found an incompatibility between Vista and my router DLINK-804 for dns lookups. Now I wonder just if Vista or DLINK is correct. Problem solved.

  Happy info. Thanks again for this information!

• Added value package new updated day on Tecra A8 - PTA83E

  Hello

  I searched the site of updated drivers from Toshiba here and I found the update of the package of value added on Tecra A8 PTA83E on Windows Vista Business 32 bit and the name of the files that I downloaded from this site for this added value Package is: vap - 20080108130751.zip, but the problem is the content of this file is not for Tecra A8 PTA83 update! Is PTA82?

  How can I get the update of this value-added package for Tecra A8 PTA83 for Vista Business 32 bit?

  Please I need it so much... :(

  Hello

  As far as I know, there is no difference and this PPV can be used on both models. Have you tried to install it?

• Tecra A8 PTA83A - Vista 32 bit drivers needed

  Hello

  I'll try to find the drivers (Vista 32 bit) for this computer laptop pta83a - 04g 012.

  However, I can not even find the laptop on the Australian site. In fact I can't find anywhere what "A8" laptops at all.

  http://www.MyToshiba.com.au/support/download

  Can someone help me please.

  I also checked some other sites Toshiba from different countries without result.

  I wish there was an option to check through all countries, at the same time.

  Kind regards
  Paul

  Hmm... I'm not sure why this Tecra series is not listed on the page of the Australian driver Toshiba but same model Tecra A8E PTA83 is released in Europe also.

  

  You can download and use the drivers for your laptop that appear on the page of the European driver Toshiba
  http://www.Toshiba.EU/innovation/Dow...jsp?service=EU

  The drivers are fully compatible

• Error 90 b - cooling fan problem

  Hello

  A few days ago I started getting message, with a cooling fan problem, error 90 b

  But this error was only occurring when I started my laptop after 5-6 hours

  I mean when I started this morning, at the first moment it showed this error, and when it will stop automatically (it says, ENTER to continue starting or it will stop in 10 or 15 seconds) and then I start it again, but this time, no error started end

  So guyz, I wanted to know whether hardware or software problem or something else

  Still my warranty period which goes, so should I goto HP support center?

  I'm on HP Pavilion dv6

  It is material but may be repairable before you send it. Bend over a paperclip and stick it through the grid to hold the fan and prevent it from running out of control and blow compressed air in the grid to dislodge any dirt or dust that can be hung up the fan. If it does not the fan may need to be replaced.

• On Tecra A9 BIOS password problem

  My computer laptop Toshiba Tecra A9 have a problem with the BIOS password and I was wondering if you could provide me the password because I can't access anything whatsoever, without it

  BIOS password is very important security feature and these issues cannot be clarified on public forum.
  Any problems with the BIOS password must be clarified with the Toshiba service provider.
  If your laptop is blocked by password and you cannot access, please contact the nearest service Toshiba and they can remove it for you.

• Tecra A8 PTA83E - only 3.3 GB recognized by 64-bit systems

  Hello

  I have a Toshiba Tecra A8 PTA83E, recently, I inserted 2x2gb DDR2 PC6400 (800 Mhz), my laptop supports only PC5300 (667 Mhz), memory works well, but under ubuntu (x 64) I see only 3, 2 GB, WIN 7 (x 64) and in memtest 3, 3 GB. Why this behavior? Is because the modules of memory has a greater frequency than those who support the laptop? If I insert a memory module(2GB) at a time I see 1, 9 GB. Thank you.

  Hello

  I guess that the other part of the main memory is shared by the graphics chip.
  What value memory appears in the BIOS?

  If the 4 GB are indicated, then everything should be OK.

• Done Tecra A8 PTA83E support 5.1 system speakers & how to connect it

  I have Tecra A8 PTA83E lap top model. (Serial No.: X6100725H)
  When I check my audio system in the Control Panel, it is show the types of outputs for 5.1 suround sytem, even some more up to 7...

  I bought a 5.1 speaker system, now I want to connect with the laptop.
  It has two input pins normal for speakers and input microphone.

  When I check the laptop, it has two plugs for the audio output and others for the mic input.

  Could you please tell me this laptop will support, if so, where the decision-making support or what I by an adapter that allows two taken from a jack (laptop audio output)?

  Thanks in advance,
  Karine

  As far as I know this will work with a digital output only sound. At your Tecra this optical port? I don t think so. I know that Toshiba multimedia notebooks have a.
  So I think that you cannot connect to 5.1 surround sound directly on your Tecra.

  Sound in the Panel options are standard options of Vista.

• Install the network and specific peripheral controller on Tecra A8 PTA83E

  Hello

  I have to install windows XP on Tecra A8 PT83E. Everything work fine except 2 devices. Indeed, in Device Manager, I can not install network controller and a device specific. Where can I find the two driver or which driver to install? All other devices are installed.

  Thanks for your help.
  Isabelle

  Hello

  I wonder why you are not able to install the LAN driver and why an additional device appears as an unknown device in Device Manager?  :|

  I ve checked the page pilot European Toshiba and found everything to install the drivers successfully on the Tecra A8 PTA83 series...!

  All the XP drivers are available.
  I presume that check you didn t txt file of installation instructions that was placed on the driver page! Am I wrong?

  Please check this document! You must download and install all drivers and tools specified in the right order!
  The proper installation order is important!

  I think that if you follow the guidelines everything works as it should!

  Concerning

• Camera not properly initialize since v. 4 - PROBLEM SOLVED

  I'll preface this with have not only I've done several ' resets all the ', I deleted all the files from camera loaded on the SD card that have been created in v.3 and after 'Reset All' was performed manually via the menu and re configure all my preferences instead of loading old sound of the SD card.

  With that of the road, my problem is 80% of the time that I start the camera with power supply or a battery, the unit freezes at the Sony logo on the submenu. Power must be cut (which has no effect), power removed/disconnected, wait the Sony logo screen disappears and then try to restart. It usually takes 2-4 trys until the camera manages to move to the "Sony" screen and performs full initialization upward. IM dreading the day that this happens on a job and the camera completely fails to start completely. I NEVER had this problem with all previous firmwares. Anyone else having this problem and any advice on how to solve this problem?...

  Side note: my first F5 made the day I brought home from Abel a year ago, but in this case the start of Sony screen wouldn't go away no matter what I or Able tried to do. They talked to Sony and said send it back, fortunately Abel gave me a new on-site and I never knew the question once again. Until now...

  UPDATE: May 30 - problem solved.

  Well it seems that everything has been healed. I went to Sony to Teaneck service yesterday and they replaced "PCB of HIF - 64" or, as we have been referring to him as the SDI card. Also updated the wheel to stop ND, design much better. Engineers, that I talked to had seen cameras having the same problem as me and reinstallation of the map is the apparent cure. Spoke with a Senior technician there for a good 45 minutes a range of topics. Was'nt able to get new information out of him, but he was very helpful and insightful no less. He said that the Japan is aware of the issue of sensor grid that some people have, but they have not been told that the solution will be even.

  Thank you Alister, I'll give them both a go and communicate the results.

• HP laptop Pavilion 17-e040us - Possible fan problem

  Hi all.  I think I have a fan problem.  The fan seems to run all the time... at least for the past 3 or raining days, but not fort, with air alternating hot and cold, of the events.  I looked at the events surrounding the outside of the computer and it does not seem to show the accumulation of dust... but even with appropriate glasses, I'm not able to see if there is dust or not... is old or in my case being old causes sight problems!  I also used the diagnostic software to see if any hardware has failed.  The results showed that the computer hardware is correct.

  Then you clean the vents (the article says that it is acceptable to use a hair dryer)?  In addition, open the back cover of the laptop to clean the fan inside if it has dust?

  Article also says to turn off the computer and unplug the power adapter before spraying compressed air.  Also if you use a blow dryer on the cool setting?  If so, what is the power adapter and how to disconnect it?

  Right now I am using the wired option.  I just need to remove the power cord at the back of the router to disconnect.  However, then the computer is wireless... How to turn off the wireless feature... so I can clean the fan/vents?

  Thank you.  I really don't miss my XP version!

  By blowing air through the vents of your laptop, you are forcing air through the fan. In a laptop, this remove most of the dirt and allow for better air circulation and cooling. This isn't the case with a desktop computer and that's why the video demostates office clean the fan.

  I suggest removing the battery is because with it in place, you can accidentally turn on the computer. With the sector/charger adapter unplugged and the battery removed, there is no chance of the computer starts.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• When the error is problem solver, I go to the store?

  When the error is problem solver, I go to the store?

  Please I need help English or Spanish

  If there is an error that you cannot solve at home, then yes the Genius Bar or authorized Service Provider Apple would be a good place to go. What is the error specific are you?