instalatie procedure voor dexxa webcam met win7

Similar Questions

• Question of D-Link DSB-C310 USB PC Webcam in Win7.

  How can I use my D-Link DSB-C310 USB PC Webcam Win7

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/using-webcam

  Check if that helps.

• Help with incredible registration / Product Code procedure

  I bought 13 items first packaged and by trying to find/use the process series/product code number.

  I've been to the https://redeem.licenses.adobe.com/getserial site where you are supposed to enter a redemption code that 'Help' are 24 alphanumeric characters and located on the box or sleeve.

  There are six boxes in the entrance which can only mean that 4 characters should be in each box.

  There is no code redemption on the box and the sleeve has a number that does not match the format or the number of characters specified above.

  There is a single item of on handle and box 8-digit numbers that can not be.

  Under the sleeves Figure 8 number is a code that do not meet the 24 characters or groups of 4 required model.

  The code looks exactly like this, except that I substituted XXX instead of two sets of letters below (because if it is a product code, I won't post).

  DHS/A, PRE, 13.0, MAC, GEN, XXX, LRE

  / WWF/D/XXX

  Now there is no point for me and I don't see how there is nothing I can get above that meet the entry requirements for the product to https://redeem.licenses.adobe.com/getserial code entry

  It must be the most hostile registration procedure that I've met in all my 25 years of experience with computers and software.

  firedeva

  If you bought the box of first 13 items, you can expect something like that

  1. a box rectangular thin hard cover (colorful Adobe) in which is inserted a white rectangular box.

  2 in this rectangular box white installation discs, one for Windows and one for Mac - each drive is in its own envelope.  There is probably a manual mini in this area also.

  3. make sure the white rectangular box. On the back of this box must be a label. This label must contain the serial number of the product for the two installation disks.

  xxxx - xxxx-xxxx-xxxx-xxxx-xxxx

  The serial number is clearly identified as serial number.

  You know very well if the seller has sold you the product with a redemption code?

  RTA

• PL SQL Stored Procedure help

  Hello
  I'm new to the development of Oracle.
  I have the following scenario for which I need your help/suggestions to write a stored procedure.
  A load process in a table unfolds with about million files once a month.
  I have a LOG Table to record the events of job loading IE when it starts, when it stops, status etc. with the following columns
  
  job_name, job_status, start_time, end_time, date, flag
  
  work focuses on the work that is in charge of the table.
  Based on the values in this table, I want to develop a stored procedure sql pl verifies the status of the job and does the following
  
  When the flag = R (assume for running job) set it to run the job again as 1 hour later... if its still ongoing then 1 hour later... so now up to 5 trys
  = F (Finished)
  = E (error problem) launch the load immediately
  
  The flag State values noted above are not binding... values just to give you an idea... all the other variables to use to store procedure or any new passes in the table... .suggestions are welcome for these values as well.
  Basically, I would like the stored procedure to be called at some point... say SUNDAY at 06:00 and check the STATUS of the INDICATOR/table newspaper column and run.
  
  In short, I like the pl sql store procedure to use table to log and monitor the loading process.
  
  Structure/Basic code stored procedure for this requirement or a stored procedure that you have met similar requirements are welcome.
  
  Thanks in advance.
  
  Published by: user13517642 on March 23, 2011 13:28
  
  Published by: user13517642 on March 23, 2011 13:29

  Your process or procedure shud look like - [not tested]

  DECLARE
     l_flag   LOG.flag%TYPE;
  BEGIN
  
        SELECT flag
          INTO l_flag
          FROM LOG
         WHERE job_name = p_job_name;
  
     WHILE l_flag = 'R'
     LOOP
        DBMS_LOCK.sleep (3600);   --3600secs in 1hr
  
        SELECT flag
          INTO l_flag
          FROM LOG
         WHERE job_name = p_job_name;
     END LOOP;
  
     IF (l_flag IN ('F', 'E'))
     THEN
          --<>
     END IF;
  END;
  

  Look at the following to find out how to plan work-

  http://www.oradev.com/dbms_scheduler.jsp

  Published by: Sri on 23 March 2011 14:10

  Published by: Sri on 23 March 2011 14:11

• IK heb firefox als mijn browser & naked maar kan ik wel in komen maar verder niet hotmail: na selecteren van een point reageert er niets meer. puts goede groet: Rob Laan

  ALS ik Explorer use hotmail wel normaal, als ik niet due use firefox works. Clean doet alleen voor zich het met firefox Hotmail van windows: kan er free inloggen maar als ik in mijn pagina inbox zit en aanklik er niets gebeurt!

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Extra > Opties > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Extra > Opties > privacy > Cookies: "show the Cookies".
  • https://support.Mozilla.com/NL/KB/Options+window+-+Privacy+panel
  • https://support.Mozilla.com/NL/KB/Options+window+-+advanced+Panel

• Successful passage of 32-bit to 64-bit

  For those who may wonder if it is possible...

  I bought a Satellite L550 a couple of weeks who had Win7 Pro 32-bit preinstalled. With 4 GB of RAM, the machine was capable of running 64-bit, so I called Toshiba Support (Australia) with the intention to ask them nicely if they could send me a 64-bit installation disk. Well, no need. The tech guy told me that the hidden recovery partition contains the 32-bit and 64-bit versions. Awesome!

  Then... I made the big jump, backed up all my data to the first drive external DRIVE (using Windows 7 backup), then launched a recovery of the system to a State of out-of-the-box by holding down the 0 key when switching on the laptop power button. The first window that pops up gave me a choice between 32-bit or 64-bit. Cool :-)

  So I chose 64-bit and from there the rest of the restore procedure worked perfectly. Once Win7 was installed, drivers Toshiba and the software factory installed automatically (implying several automatic re-boots). Basically, once the recovery process had started, I didn't have to do anything at all - I could sit back and watch the computer do its thing. The whole process takes maybe an hour or two. All my hardware devices are working and Win7 Pro 64-bit works beautifully. Restore my files backed up and software and soft!

  Thus, it can be done. Just make sure that you have backed up all your stuff first and make sure that all your devices will run on 64-bit.

  It's a happy customer here... :-)

  Nick

  Hello

  Thanks for your 'good news', I face the same problem.
  I want to buy a Tecra A10, but it also comes with a 32-Bit - system.
  Why are they doing this, looks like a fFerrari with an older 3-cylinders-2-race-engine.
  #
  How can I know whether that move from 32 to 64-bit is also possible with a Treca A10 1GV?

  I don't see no service-nr.
  Can you help me?

  How to find the hidden restore file?

• Microsoft Bluetooth Notebook Mouse 5000 question

  I've been using the Microsoft Bluetooth Notebook Mouse 5000 with my laptop Sony VAIO under Vista Home Premium for almost 6 months. A few days earlier, I was transferring a file from my laptop to my phone via bluetooth while the mouse is connected. During this operation, the cursor of the mouse began to move eradically in the branch on which I show the mouse. He was slow and jerky by following my movements. I had noticed this behavior in previous proceedings, all in my phone and pc were in communication via bluetooth. To fix this issue on all other occasions, I would be simply to disable the bluetooth mouse that had completed the transfer and then turn it back on and it will behave as expected. On this occasion I hit by mistake the detectable button on the bottom of the mouse instead of the power switch. The mouse came into discoverable mode, indicated by the alternating flashes red and green battery light, and the cursor no longer responds. Then, I turned off the mouse and turned back, waiting for his execution to return to normal. However, he was always insensitive. I tried to add the mouse using the bluetooth devices Wizard, but as Research Assistant for the devices mouse is not discovered, although it is in discovery mode. So, I fixed my drivers bluetooth supplied with the laptop, but no change. Interestingly, in the device under the mouse Manager, here's my touchpad and a hid-compliant mouse, if I don't have another mouse connected. When I turn off my bluetooth power, this device disappears from Device Manager and reappears when the power is turned back on, despite the bluetooth mouse not lit. I can still communicate with my phone via bluetooth, but not the mouse. Microsoft sent me a new mouse, but I do not expect this to solve the problem, because I think it's a software problem. Someone at - it ideas? If you would like more information, I can certainly do...

  I had the same problem the year last on a Dell XT; Ms sent me a new mouse BT 5000 and still had the issue. I gave up and updates several months later and unknown, the machine worked again. Today, I tried to use it on another laptop and worked well. I went back to my XT and the red LED flashing (detection mode) is back. Now, it will not pair with a PC. I think the problem is with the mouse it self. He becomes confused and stock in a mode that is not really "detectable" or bc no BT device cannot be found. Remove the water for long periods only resets NOT to be. I finally make it work but don't know what not solved the problem but that's what I did: disconnected (off) BT on PC, which is held to discover button mouse while turning power off, battery removed from the mouse. BT on PC has and began to search for devices of BT, replaced batt in mouse and turned on, you press on discover button mouse (PC is always looking for a device), and he appeared! I chose it and the red light stopped flashing and works well.

  Note that I tried everything back several months ago on the different versions of hosts BT running on XP pro with no luck. Now I use Win7 and this procedure was performed on a Win7 OS PC which seems to be more stable. Hope this helps someone. Sorry I could not be more specific about what is perhaps the question; I still don't know! :)

• Al een paar keer het English account you beeindig, maar nog steeds niet gelukt? DHS like alsnog uitvoeren.

  Geachte form,

  Omdat we het account 'Creative cloud' niet meer nodig location (10 jaar winkel cooked al now), heb ik veel pogingen Molfetta via internet through om het subscription op telefoon en you hotel, maar dat is show steeds niet gelukt.

  DHS ordering breakfast ik u het naked subscription you beeindig, dat maandelijkese follow gestopt wordt ook wijze op.

  Het gaat om het mailadres (gebruiksnaam) next: [email protected] en code is: 43266mpk

  Tevens een good breakfast om ons even ordering you reply:

  telephone: 06-1326 8864

  email: [email protected]

  by mail: 34 Godsacker 8801LN Franeker

  ALS het ook weer niet nu zou Anonymus om het subscription good you beeindig, OM ben ik We

  incassering through zelf credit card you loss. Is filled Bank besproken en kan al, Indian nodig, by direct uiitgevoerd worden (puts many Bank van).

  DHS ordering additional hotel (eigenlijk dringende) breakfast om het het door u nu onmiddellijk you laten uitvoeren.

  Alvast without help of dank voor uw en met hartelijke groet,

  M.P. Kamsma

  (v/h/Kamsma shoes Franeker)

  Godsacker 34 8801 LN Franeker

  0517-382765 Tel., mobiel: 06-1326-8864

  mail: [email protected]

  How to cancel a subscription cloud creative

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

• Win7 on Satellite L300D - Webcam is locked by another application

  Hello

  I had updated my Windows Vista to Windows 7 and since I had problems with the webcam.
  I tried to download other software and it will work for a day or two when I go to open the webcam there is a pop up that says the device is locked by another application when nothing else is in place?

  It seems also not connect to Skype? Anyone have any ideas?

  It is not easy to say what the problem is here. Webcam is entered correctly in the Device Manager?

  I have experience with Win7 on Satellite L300 God. I ve done own Win7 32 bit installation with all the drivers, tools and utilities and I must say that the webcam works perfectly.

• Need driver Win7 for my Satellite A300 webcam

  Hello, I am looking for the drivers on my webcam.
  My model is Toshiba Satellite A300. In the official page, it has drivers for the webcam in windows 7.

  Thank you

  I have A300 with Win7 32 bit pre-installed on it. I had the same problem and I ve installed driver webcam offered for A500. It works perfectly. You can do the same thing.

  Test it and send feedback.

• Re: Satellite A300 - how can I make the webcam work on Win7

  Hello everyone.

  I had Win Vista installed on this Satellite A300 and it worked well.
  I had no problem at all.

  Then I moved to Win7 and now I'm going through the test of the work of webcam.
  I tried to install all types of drivers, even those for A500, but it would be of no use.

  So, how can I make the webcam work on my A300?

  I've tried everything, even the installation of Ubuntu on this laptop and still it wouldn't work. If this is your interest, I'm under Win7 in Spanish, x 32, Home Edition.

  I really need your help here, please, I beg you, I spent 5 days ago almost try ANYTHING!
  And yet, I get the message after each installation/reboot of the: "the camara web esta disabled o ha Fall.» "Por favor, it check las web camara su configs", which would result in something like "the webcam is disabled or it has failed. Please check the configuration of your webcam. I've been browsing the forum for related issues, but I have not found any solution :(

  Thanks in advance,

  Ozma.

  Hello

  Seems the webcam software has not been installed correctly.
  That Win 7 OS do you use? 32-bit or 64-bit?

  Here you can find Chicony webcam driver for Win 7 64 bit
  http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091026100013.zip

  and here you can find Chicony webcam driver for Win 7 32 bit
  http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091023184836.zip

  Good luck

• Satellite A200: after updated to malfunction of software webcam Win7.

  Updated my laptop Satellite A200 from Vista to Win7 but now have problems with Chicony Camera / Software.
  The messages I received - "Chicony USB 2.0 Camera has a driver problem '." Reinstalled"complete device driver.
  «Problem with detected PnP devices»

  I tried the Chicony Co site but received no feedback

  Someone suggested to install the drivers of motherboard chipset OK for my laptop model.
  If so, how do you that?

  Meanwhile, the integrated Webcam does not work and will not install the driver for the Webcam updates.
  Forgive my ignorance, can anyone help?

  Hello

  First thing you need to do is to identify your complete model number that you will find at the bottom of your laptop.

  Then, go to the following site and fill out the form:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Download the following files:

  -Chipset driver
  -Toshiba Value Added Package
  -Driver Chicony webcam

  Before installing the files downloaded, you need to remove all previous installations of your webcam (from programs and features in Control Panel of Windows 7)
  First install the chipset driver, then install Toshiba Value Package added after installing the driver for webcam.

  It will be useful.

• Satellite A300 - Webcam not working not because I installed Win7

  Hello

  I have toshiba laptop Satellite A300, it had windows vista installed in this laptop, but I formatted and installed Windows 7 and since I installed this windows 7 my webcam is not working it gives an error "webcam driver open fail.please restart camera or computer" and even after doing this its does not work.

  And after the installation of this window, I think that the display setting is also out of order, I tried to install the drivers and sorftwares support toshiba but without success.

  I need help to solve this problem. Help, please

  Thanks in advance.

  We hope to hear soon.

  Hello sajjad

  I ve made very good experiences with Satellite A300 and Win7. In front of me, I have Satellite A300-1LI. This is the PSAG8E model and I can confirm that everything works perfectly.

  I have an offer for you:
  Send us please phone model correct and we can check the Toshiba download page to see what's available for Win7 for your laptop model.
  I can also send you exact order facilities how to install all the stuff from Toshiba.

  Please let us know what you did to get the camera work.
  Let us know how you installed Win7 and all the stuff from Toshiba (drivers, tools and utilities).
  You have other issues with Win7 on your Satellite A300?

  See you :)

• Driver webcam Win7 VGN-CR320E

  Where is the driver for it?
  Ive already tried Vista homepremium pilot it does not work.
  I'm using Windows 7 Ultimate 64 bit.

  I have the same laptop and have been searching for months for a driver & found this driver yesterday.

  I am running Win7 Enterprise 64-bit. I installed it and the camera came without problems using the ArcSoft software. I also tested with Skype & time audio and video work great.

  Here is the link to the post where I found the driver that makes a webcam Ricoh-manufactured Sony used.

  http://readmystuff.WordPress.com/2009/0... s 7-64 bit.

  Hope it works well for everyone!

  I have one last question... then... Why couldn't Sony have provided us with this? Just Askin '

• Acer Aspire 7741 G-6426 Win7 32-bit: Bluetooth and Webcam not working not

  We have two laptops Acer Aspire 7741 G-6426 Win7 32-bit that neither bluetooth NOR webcam work on.  Both of them have, according to the Device Manager, all the drivers installed (no yellow exclamation point and try to update drivers yields the 'installed the latest software' message) and we seem to have all installed software.  In fact, there is no driver under Device Manager problem.

  We have Acer Crystal Eye webcam installed, but when you navigate to it (start > all programs > Acer Crystal Eye Webcam video class), the only option is "Uninstall".

  We Suite Bluetooth installed for the bluetooth, but when you navigate to it (start > all programs > more Bluetooth > Bluetooth Suite) and try to start it, nothing happens... no program will ever launch.  There is also a Bluetooth peripheral folder (start > all programs > Bluetooth devices) which says: (empty).

  What gives?

  I checked our systems and found that the Aspire 7741 G-6426 not comes with Bluetooth.