HP Probook 6560 b windows 8 install

Similar Questions

• HP probook 450 g2: hp probook 450 g2 windows 7 install won't start

  HP probook 450 g2 windows 7 does not start
  I tried to install windows 7 on a hp probook 450 g2 teacher
  A CD (legit) 64-bit
  He necassery hard disk files but does not start
  
  After it's over load the next screen it freezes instantly
  and victory 8.1 is damaged so I can't fix that the laptop came not with a repair disc

  Hello:

  You disable startup secure in the bios and enable legacy in BIOS mode?

  These settings must be changed in order to install and run W7.

• HP ProBook 6560 b: PCI driver for Windows 10

  Hello

  just upgraded my HP ProBook 6560 b for Windows 10 Pro (64-bit) and I have 3 questions of driver in Device Manager:

  -Device base system (PCI\VEN_197B device & DEV_2392 & SUBSYS_1618103C & REV_30\4 & 5c5cda9 & 0 & 01E2)

  -PCI Serial Port (device PCI VEN_8086 & DEV_1C3D & SUBSYS_1618103C & REV_04\3 & b1bfb68 & 0 & B3)

  -Unknown Device (device ACPI\HPQ0004\3 & b1bfb68 & 0)

  Could you please help me with some drivers?

  Thank you.

  Hello:

  You need these drivers...

  Base system device:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5045607&swItemId=ob_125952_1&swEnvOid=4158

  PCI serial port:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5045607&swItemId=ob_125965_1&swEnvOid=4158

  ACPI\HPQ0004:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5045607&swItemId=ob_125640_1&swEnvOid=4158

• ProBook 6560 b: USB\VID_138A & PID_003C & REV_0086, USB\VID_138A, PID_003C,.

  I have a laptop HP probook 6560 b,

  Product number: LW953PA #ABG

  Windows 7 Professional 32-bit Service Pack 1

  When I looked in the Device Manager, in another subfolder of devices, there is a yellow! for "unknown devices".

  Details of the hardware ID have been:

  USB\VID_138A & PID_003C & REV_0086

  USB\VID_138A & PID_003C

  I also have an another yellow! for "unknown devices".

  Details of the hardware ID have been:

  ACPI\HPQ0004

  * HPQ0004

  Any help on how I can address these issues?

  Cheers, Hepstarr

  Hello

  Please install these drivers below and see if this solves your problem.

  USB\VID_138A & PID_003C & REV_0086

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5071172&swItemId=ob_134806_1&swEnvOid=4158#tab3

  ACPI\HPQ0004

  Could be Quick Launch buttons or (more likely) ProtectSmart Hard Drive Protection

• HP ProBook 6560 b - USB\VID_138A & PID_003C & REV_0086 & USB\VID_138A & PID_003C

  Hi all

  I saw a lot of people have the same problem with HP, but I can't find the driver for my machine.

  My machine is HP ProBook 6560 b runing Windows 7 32 bit.

  In my device manager I have an unknown device and when to go in properties I found the following:

  Genral - Port_ #0001.Hub_ #0003 & the drivers for this device are not installed. (Code 28)

  Details - USB\VID_138A & PID_003C & REV_0086 & USB\VID_138A & PID_003C

  Can anyone help please?

  Anthony

  Hi, Anthony:

  Here is the link for the driver you need for this device:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5045605&prodNameId=5045607&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-106154-1

  Paul

• Not found network controller driver, the hp proBook 4530 s, Windows 7

  I use a laptop (4530 proBook s), with Windows 7, 64-bit and in Device Manager I get a yellow exclamation in the network controller even after downloading and installing the respective driver Atheros / Realtek Wireless LAN driver (s). The packacge driver extracted himself, and there is no confirmation of the installation of finishing.

  The problem started after an update of the BIOS by the wizard of support from hp on my pc

  Hello:

  Here is the link for the driver you need for your wireless card.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

  Paul

• ProBook 6560 b: HP Probook 6560 b missing Admin PWD

  Hello Experts,

  Try to improve the behavior of my laptop (Probook 6560 b), I tried to install an SSD instead of the CD unit, using a Caddy.

  Everything is good, but the SSD is not installed because it was not validated in the Bios.

  As the admin account is not applied to the initial installation of the system, I have no password to be retrieved. Also fingerprint or stupid questions have not been activated.

  I use the BIOS pass three times with no error code.

  Resetting CMOS didn't help, either.

  So, if you can please help me with the clear BIOS that can help me to restart the admin check, which will be a great help.

  Thank you

  Emil.

  @emiltudor

  Contact HP.

  http://welcome.HP.com/country/W1/en/contact_us.html

  Or download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked portable flash drive and boot. "" If the HARD drive is installed, remove before starting.

  At C:\OUTPUT, type CD...   "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Given that your model is not listed, select "SHOTGUN".

  After the reboot, repeat 'SHOTGUN' a second time.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  Additional help here.

  http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility?s=ad18a86dbbaf34999e22b1225a42a395

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• mSata SSD - M500 Crucial 240 GB for ProBook 6560 b

  Hi all

  I have ProBook 6560 b,

  today I try install mSata SSD - M500 Crucial 240 GB and I got this message on the screen of the BIOS:

  The system detected that a module installed in the system wireless is

  not taken in charge and disabled.

  WWAN Module ID (703)

  ENTER - continue starting

  ...

  Do you guys know how to fix this?

  Looking through the Service & maintenance guide, I don't see the possibility to upgrade with an mSATA SSD. It is, unfortunately, a bit of a non standard upgrade path.  Your BIOS is expecting a different type of module to be connected to the location that you have plugged your mSATA SSD in.  If you want to upgrade to an SSD, then you will need to use a SATA SSD.

  As seen in the picture below (from the maintenance & service Guide). This means making a choice on the use of the Bay when a DVD player is likely to resident currently in your laptop.

  

• Reset password Bios HP ProBook 6560 b

  Hello team, could you tell me how to reset the administrator password of BIOS

  HP ProBook 6560 b S/N:[personal information]
  

  Hello martinhoreis,

  Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

  When you post here, just provide your product number, not the serial number or the Windows key.

  Good luck!

• HP Probook 6560 disconnects from the Wi - Fi just about every 35 seconds

  Hello

  I work in an office for a fairly large company, and I'm the computer technician, whenever one of my colleagues has a problem. However, I was unable to find a solution for this, so any help would be greatly appreciated. My colleague uses a HP ProBook 6560 b, running Windows 7 Professional 64-bit, and it has a Broadcom 802.11n network adapter. The problem is that every 35-40 seconds, the computer disconnects from our wireless network (we use a NetGearWNDR3400 wireless router), to reconnect almost immediately. Although this seems to be a minor problem, it effects often its ability to send e-mails, which is one of the most crucial functions of her daily tasks. I also note that we have four ProBook 6550 b laptop computer connected to the router, and we did not have problems with their connectivity. Any help would be greatly apprecated.

  Hello

  Please try these steps below might help you solve the problem.

  (1) go to the Device Manager and uninstall the driver for the wireless and restart the device and check if it works.

  (2) update the Bios and the wireless from the HP website.

  (3) reinstall the card wireless on the laptop and have it checked.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Kind regards

  Maton

• I have windows 7 installed with boot camp.

  I have Windows 7 installed with boot camp and use it for some financial software and games. Is this compatible with El Capitan Win7 installation, if I update?  Thank you

  Yes. Please check that you have backups and disk not resized/re-partitioned, before the upgrade of the El Capitan. In addition, create a Windows system restore point before the upgrade.

• Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unc

  Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unchangeable.

  Select the sidebar if hidden. View options > view as may depend on which of the options for the song, artist, album, etc. are selected in the sidebar.

  TT2

• Satellite Pro A10 - no valid Windows XP installed

  Legitemately bought a Toshiba Satellite Pro A10 laptop, but there is not a valid Windows XP Professional installed. I have the original product key.

  Can I download this, free preference?

  Hello

  How have you noticed that an invalid Windows XP installed?

  Usually if you reinstall your laptop with Toshiba recovery disk it s a copy valid XP is already activated and there is nothing to do.

  In addition, the product key on the lower side of your laptop belongs to the preinstalled version of Windows XP and t can be used with the other XP discs.

• Pavilion x 2 10-n010nl: WINDOWS NOT INSTALLED

  

  "installation of windows: is impossible to complete the installation." to install windows on the pc restart installation.

  If I press 'ok' this message returns and the same thing with the 'X '.

  What can I do?

  Thank you

  OK, so let me correct me on the tools.

  You will need another Windows computer with an internet connection, a 8 GB USB key.

  Your Pavilion x 2 has already a normal USB port, so you don't have an OTG adapter or an external keyboard.

  On another Windows machine (laptop or desktop), you will need to install the Microsoft Media creation tool. Download 32 bit or 64 bit to match the other PC you borrow to make USB install drive with.

  Windows media 10 creation tools

  Once installed, launch it. When it opens, follow these steps:

  Choose "Create install to another PC media" and click Next.

  Select the desired language. Select Windows 10 House. Architecture, choose 32-bit (x 86) and click Next.

  Select a USB flash drive and click Next.

  Make sure that the correct drive letter is selected for your USB Thumb drive. He will probably want to name ESD - USB by default, and it's ok. Click Next.

  It will start to download Windows 10 and create the version installed on the USB key.

  Now that your installation drive is made, you can use it to install Windows 10 on x 2 flag.

  Makes sure that your battery is fully charged and the power is connected.

  Insert the installation disk USB that you just created in the USB port.

  Make sure that no other things aren't connected except the USB thumb drive, mouse cable and power.

  Turn on the Tablet and quickly start pressing the ESCAPE key to bring up the Start Menu in the Bios.

  Select F9 for Boot Device Options.

  The TOP or bottom of the arrows on the keyboard to select the USB.

  The USB key can start the installation or might open a window asking how to make the recovery. If so, select the program in the media.

  NOTE: IF the USB is not an option to select, you need to go back into the Bios and disable Secure Boot and / or also to activate Legacy Boot. Here, the link to the instructions for it and it will be the same for almost all HP computers.

  How to disable Secure Boot

  Once that Windows is installed, you will be asked to enter an activation key to continue.

  Choose to ignore this and allow the installation to continue. When Windows finally installed it can ask you again the key.

  Pass it again and let Windows update or force it to be updated manually. When it updates, it will be activated automatically. It will because you already had 10 Windows updated, work and previously enabled on this computer.

  If all goes well, I didn't confuse you again. Let me know if you have any other questions.

• How to wake up ProBook 450 G1 Windows 7

  How to wake up ProBook 450 G1 Windows 7?

  If the portable sleep I have only one way, push the hold switch off them after.

  Is a way to do wake up more friendly.

  Thank you!

  http://www.sedlenieks.lv

  Hi intssed, sorry to hear you have questions to put your computer out of fashion 'sleep'. I found a great Charter which I think will help you solve the problem. Please click on the link to get the document.  http://support.HP.com/us-en/document/c03383935

  If this does NOT resolve the problem, please do not hesitate to write again for additional instructions.

  Thanks in advance.