install ESX/ESXi on faster disks increases performance of the guest OS?

Similar Questions

• Performance of the guest operating system Win2k3

  VM Workstation: v6.5.5 build 328052

  Host OS: WinVista Ultimate (64-bit)

  4 GB of physical RAM

  50 GB of free space

  64 bit chip

  OS comments: 1) Windows 2003 SBS 2) Windows 2003 SBS

  1 GB OF RAM 1 GB OF RAM

  8GB 32 GB space space allocated

  < < SLOW > > < < ACCEPTABLE > >

  The issue I'm having is on the slopes significantly slower than #2 #1 VM.  #2 works pretty decently.  #1... well over this long last week I started it after being unused for awhile.  I got the prompt to install VMTools so I did this. He took over 36 hours to install VMTools!  ;-((.  I want to update the operating system with updates from MS since several months, but I did not "months (or more!" to run through the update.

  What are the options (performance etc.) would you suggest for #1?  Apparently, the two #1 and #2 are the same, as far as I KNOW, in all other aspects of the guest operating system and settings.  Is there a setting/performance video or paper about this game and how build/debugging etc. for optimal performance?

  TIA!

  Hello.

  How did they build each of these virtual machines out there?

  #1 is slow if #2 is also well off?

  Good luck!

• Cannot install ESX 4 in workstation 6.0.1

  Hi all

  I'm new to VMWare... I installed the workstation on xp host, and now I am installing esx 4 in my computer. I configured the .vmx file. I chose redhat linux as OS type when VM was created.

  I downloaded the site vmware esx server for free. I created the iso file with nero. I tried with both cd and disk. but it shows the msg

  "PXE - M0F: exit Intel PXE ROM".

  Operating system not found. "

  I use AMD athelon 2.7 g processor and card mother amd with 2 GB of ram.

  Please help on this.

  Thank you

  try with the iso file available on the download site instead of the creation of the iso vmware

  Just look at available at following vedio

  http://www.YouTube.com/watch?v=rdghryRrzlo

  before you start doing your test configuration

  and it is better to increase the memory of your system at least 4 GB because esx 4.0 itself need 2 GB RAM min

  concerning

  Maniac

• Move VM to ESX ESXi

  We look at what moving a VM ESX, ESXi machine there at - it problems with the copy - paste the folder on ESX VM?

  (For example. ESXi vm images are compatible with ESX)

  Convert the virtual machine in ovf and save it on USB. Deploy the vm host another FVO

• How can I install photoshop elements 13 without disk? I have a laptop without the option of disc

  How can I install photoshop elements 13 without disk? I had the program as a gift but is not an option of drive on my laptop

  PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• Broadcom 57711 + ESX/ESXi 4.1 + Jumbo frames

  Having a few problems getting Broadcom 57711 NIC working on ESX/ESXi 4.1 with MTU 9000.

  ESX/ESXi 4.0 U2 I have no problems to do and work MTU 9000 and I can push our strong enough EQL PS6010 SAN get 550 000 kbit/s with e/s meter runs inside 4 x VM.

  I read the documentation and found that an MTU of 1500 is supported only for the NIC in ESX/ESXi 4.1 57711. It has somethig to do with the fact that these cards have hardware iSCSI unloading, there is additional iSCSI adapters that appear under the storage adapters heading 4.1 hosts.

  I everything configured properly with 1:1 binding maps iSCSI network to ports VMK iSCSI with an MTU of 1500. When configured, this is the max that I can get out the SAN is 280 000 kbit/s. If I try the same process using the virtual machine a MTU of 9000 / host appears to stop responding.

  While I understand that it is a limitation of 1500 when using iSCSI NIC hardware I am unable to get the iSCSI Software to work with a MTU of 9000 on ESX/ESXi 4.1. If I try the software iSCSI using a MTU of 9000 of the VM / host appears to stop responding.

  Is also a limitation, or am I missing something.

  Is there anyone else out there has the same problems as me?

  VCP3 & VCP4 32846

  VSP4

  VTSP4

  Looks like a CD to update the Broadcom Driver (1.60.50.v41.2) was recently published in the area of downloads/drivers & tools vsphere.  I have not tried yet, hopefully, it will solve this problem.

• HP Elite 8540W workstation: boost the performance of the laptop

  Hello..

  I just bought the HP mobile workstation elite is a fast computer, but is limited in storage, it has only a 250 HARD drive, im, consider using a second HDD but since I don't want hangs in two new drives hard im planning to use the 250 as storage and buy a 500 hybrid HARD drive as drive main HARD (for the operating system) , I know that the hybrid is normally faster than the normal HARD drive, but since I whant to increase performance of the laptop that I would like to know what better configuration.

  -Primary hybrids, normal as storage device.

  -Normal as primary hybrid, as storage device.

  -Two hybrids (one of the options above preferred since I just want to buy 1, but I'm open to buy two if the options above won´t help)

  What I put, t want to do is buy a single HARD drive and for a neck bucase bottel of the difference between the drives.

  I'll use the primariy for laptop design Solid works and games.

  Thanks in advance.

  Always run the operating system of the fastest device. Disks hard hybrids are only slightly faster than the readers of meachanical despite claims from marketing to the contrary, but choices you give I'd go hybrid as primary and normal as a storage device. If the budget allows, download a player in real solid state without mechanical transmission components.

• How can I get the Guest VM CPU, Ram, disk of VMware Tools?

  Hey guys,.

  I have a question for the information of the guest OS,

  I can use the SDK to get information such as the disk i/o of vCenter,

  But I can't the CPU, Ram, disk use on the comments operating system?

  I know vmware tools can help, but I don't know how to use the web Service to obtain, please do me a favor!

  Thank you

  To get the disk usage information in the guest operating system, you get "guest.disk" property of the managed object VirtualMachine. This will give you the total capacity and free space on each disk information.

  http://www.VMware.com/support/developer/VC-SDK/visdk41pubs/ApiReference/Vim.VM.GuestInfo.DISKINFO.html

  For the processor and memory, you can extract the properties "summary.quickStats.overallCpuUsage" and "summary.quickStats.guestMemoryUsage" of the managed object VirtualMachine.

  http://www.VMware.com/support/developer/VC-SDK/visdk41pubs/ApiReference/Vim.VM.summary.QuickStats.html

  I hope this helps!

  Neha

• Upgrading to ESX 3.5 host to ESXi 4.1 where the VCenter is installed on the guest system

  Hello

  I try to find measures to upgrade to ESX 3.5 host to ESXi 4.1 where the vCenter Server 4.1 is installed on the system of comments on this host.

  Any suggestions are welcome.

  Thank you

  Georgi

  Should I move the virtual machines from the first RAID at one of the others? Whipe then come out the scores and perform ESXi 4.1 installation?

  Yes, it's a way to do this.

  Unfortunately, the ESXi 4.1 installation wipe the disk to complete installation (or logical volume) as you have experienced. Assuming that "logical partitions VMFS" you mentioned are logical volumes actually created in the RAID configuration (presented as individual of the operating system disks), you can migrate the virtual machine that is currently stored on data store of the installation disk to a data store on one of the other logical disks and then install ESXi.

  André

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

• Converter does not have "an error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. »

  Hi all

  I'm having some trouble converting server physical windows using autonomous vConverter 5.5.

  error message:

  "An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "

  I have attached the bundle newspapers. Please notify.

  See you soon...

  Your error is:

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  Check the manual on the required ports.

  HTH

• installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  Welcome to the community,

  Please take a look at for example http://wp.secretnest.info/?p=697 to know if this is the problem you are facing.

  André

• Unistalling ESXi &amp; install ESX, what of my virtual machines?

  Hi all

  I think unistalling vSphereHypervisor (ESXi 4.1) and installing vsphere (ESX 4.1) on my home server.

  How to preserve my 8 VMs or backup them?

  In addition, I will win by opting for ESX 4.1?

  At this point, the difference between 4.1 ESX and ESXi 4.1 shrinks, for what you can do through administrative tasks. Get the unit of MAS, and you have more features. With the new ability to remote SSH on ESXi 4.1, you win a lot of what ESX 4.x used to bring to the table (by itself without the need to modify a file of confd ESXi 4)...

  So unless you have tools/software that works only in ESX 4.1, I wouldn't wipe and install ESX 4.1... Firstly, you'll need to do the reverse, when you want to go to the next version. On the other hand, most third party tools have been updated to ESXi 4.1, are being updated, or will be before too long. At least those who actually want to keep their customers running VMware products.

  I moved my VM to a SAN/NAS in my lab at home. It is very handy when I want to update the host, since I can have run them on a temporary host (a good system, using ESXi 4.1 installed on a USB key). Finally, I have at least two hosts in my lab running 24 x 7 so that I can more easily update things. In addition, it will allow me to run several virtual machines at the same time.

• How can I make Photoshop run faster, or how to increase performance?

  Hello

  How can I make Photoshop run faster, or how to increase performance?

  Help, please.

  Kind regards

  Techvedic

  Nice day!

  Please read this:

  Optimize performance. Photoshop CS4, CS5, CS6, CC

  If you have any additional questions, please read this (specifically"to provide relevant information to get faster answers" "):

  http://forums.Adobe.com/docs/doc-2325

  Kind regards

  Pfaffenbichler

  (edited)

• Can we install ESX 4.0 on ESXi 4.0?

  I tried this on a DELL 2950 edge. I installed ESXi 4.0 first, and everything is OK. Then, I created a new virtual machine for installing ESX 4.0.  The actual installation is smooth and successful.  And this ESX 4.0 can get our DHCP server's IP address.  But I can't ping.  It's very interesting.

  Have you tried that?  And all the comments?

  Thank you

  Try to activate the "Promiscuous" mode on the vSwitch where the ESX VM is placed on.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.