Install help for generic users

Similar Questions

• Effective way to create an online help for different users

  Hello
  
  I use RH6 (RoboHelp HTML) on Windows XP to create WebHelp. I need to create an online help for 3 different users, for example, student, teacher and principal. Some functions of the software are available based on the permissions assigned to users. So, I developed a main project file ("All.xpj") that contains all the topics. Then I create a new project for each type of user and import only the topics that relate to the user. It is the most effective way? I didn't have to create 3 or 4 conditional parameters... because I would have to re - create the table of contents, the Index, and the Glossary for each project. It is the most effective way to use RH6 for my needs?
  
  Any advice or suggestions would be greatly appreciated.
  
  Thank you
  FMnRH

  Conditional compilation marking would go like this:
  1 mark the topics specific to the user as a 'Student', 'Teacher' or 'Major', as the case may be.
  2 leave unidentified all subjects that are common to all.
  3. Enter the three configurations different single source (SSL):
  -L' SSL must have the term generation student NOT a teacher AND NOT Principal.
  -L' SSL must have the term generation NOT a student teacher AND NOT Principal.
  -The main SSL should have the term generation NOT student AND NON-teaching.
  All unmarked topics will appear in the output.
  4. the table of contents can be trickier; It depends on your structure. Tag user specifi c-books in the table of contents as a student, teacher or Director. Let the unidentified current material. Do the absolute minimum marking here that you can get away with and try to keep the simple tags and high level. It is too easy to lose them in a table of contents complex. The thing to remember here is that if a topic is not in the output, it will be automatically excluded from the table of contents. This means that if you have marked a topic as a teacher, he will not be displayed in the table of contents of the student, even if you do not expressly exclude the table of contents entry.
  5. as a result of the reasoning in number 4 above, the index should take care of itself, and I think that the glossary will be, too, although I have not played with glossaries a lot.

  -----------------------

  I think you have the right idea on how to perform the merge. I don't have access to HR right now to check.

  If all three projects have the same definitions in the glossary, put them in the common project of the child, not duplicate them in the user-specific projects.

  HTH,
  G

• Functionality of help for the users of the database

  Hello
  
  I was wondering if anyone knows a good way to implement a feature to aid in your dashboards.
  
  Users that work with our global dashboards do not have much experience with IT, so I want to make a shortcut function.
  
  This might be a question mark to each report to explain what it does and how you do it, or maybe a clue F1 help as you get with Outlook.
  
  
  Someone has ideas or could signal a good option for me?
  
  
  THX,
  
  Erik
  
  Published by: user10703465 on November 6, 2009 07:01

  If you have your sample sale and RPD webcat with you that comes with your install (10.1.3.4) you can see the dashboard it. They have implemented the functionality of help with a link and a report.

  Any ways I will explain

  Create a sample report with a dummy object and go directly to your static text and you can include text that you ever need as how to use dashboards or what this dashboard used for etc etc. Save the report

  Now, go to the dashboard page and add the object link on the left and to the simple reference component destination this request. Type 'Help' in the legend.

  You can simply use FMAP available to the image if you have one. Referecing of the sample as shown below

  FMAP:views / Help.gif

  You can download the images online and make sure that store you them under

  File C:\OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res

  It may be useful

  Thank you
  Prash

• How to install Firefox for all users

  I need all the users on my computer to get firefox. It will only install to a user when connected to this account. When I try to install a second account, it uninstalls the first location.

  Where is the firefox install file to install for all the world on the computer? (like every other install program... with the exception of this one lately.) Note: I'm talking NOT about extensions, just the program firefox itself.

  Hello

  You must install only once since any account by right click on the installer of Firefox and run it as an administrator. All users will have their separate personal settings.

  Install Firefox on Windows

  Install Firefox later

• I have install help for elements 11

  I inserted my drive, then manual says that a pop up dialog box and it did not. What would be my next alternative as to install this program

  Copy the contents of the disc to a directory desktop.  Double-click the Setup program in this directory desktop.

• program change install for all users to a single user

  Hi, without having to reinstall, is it possible to change a programs install the option to all users for the current user? I installed yahoo messenger on our server and installed mistakingly for all users, now it opens to everyone who connects, when only a user needs. I don't want to have to manually, go around and uncheck the option 'open the connection' for everyone and I would like to remove for all users

  Thank you very much

  EDS

  Hello

  I suggest you according to the question in the forums and check them off below if it fhelps:

  http://social.technet.Microsoft.com/forums/en-us/category/Exchange2010, exchangeserver.

  It will be useful.

• Hide the headings for specific users/groups

  Hello
  
  Is this possible with WEBhelp, hide/Exclude subjects for specific user groups / users?
  
  Currently, we use html/chm help. There is a project for our main software. I have another project for an add-on that is integrated in the table of contents of the main project using the merged help function. We only install help for this module when the customer has purchased this module. So the customers who do not have this module do not have help to make it.
  
  It is possible something similar with WEBhelp (Pro)? I ask because we go to WEBhelp (Pro). In this case, there is no help by the customer file, but one for all the world. Is there a way to display only the additional items to customers who use this module?
  
  * The only way I can think is to integrate all this into a single project and publish twice (one with and one without the themes of the additional module) using the tags of the construction. Or is there a way to let the RoboEngine/RoboServer merger it on the fly, but based on the criterion that the customer has the module?
  * This additional help project can be added to the main help as a teaser for other customers also use this module (others cannot buy unless you are a franchisor of a group of specific hotel for which we have developed the module)
  
  Thank you

  Hi John-Pierre. RoboServer this is impossible on the fly. Tags of the generation are the way to go. Simply create a new tag, apply it on the subjects you want no franchises user to see, then apply the tag to your SSL to exclude it from the output. Viola, you have your username not franchisees to help. Simply remove this label from construction of the SSL for users of franchises so that they get everything. You can also create two identical WehHelp Pro SSL - 1 vote against and no label construction and the other with a construction tag to avoid you to have to remember to add/remove.

  How your application will know files that help write? Is this a separate executable? I know that it is possible for the INSTALLATION. EXE to check the license before installing the modules, but I never went to the bottom of this line.

  BTW, build tags can be used on all types of output.

• HP M477fdn printers have been impossible to install the driver for some users. We receive the error message following '0 x 00000006 '.

  have been unable to install the driver for some users. We do not receive the following error message.

  Error: 0 x 00000006

  Hi Sameer,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I would like to know some information.

  1. You are connected to a domain network?

  2. When exactly do you get this error code?

  3. Do you also have any error message?

  This problem may occur if the print spooler service is stopped.

  To start the spooler service, follow these steps:

  1. click on Startand then click Control Panel.

  2. double-click Administrative Toolsand then click Services.

  3. double-click on the Printer Spooler service and then change the startup type to Automatic. This option sets the spooler service starts automatically when you restart the computer.

  4. If you want to start the spooler service immediately, click Start in the area of The State of the Service .

  I would also refer to the Microsoft Help Article below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How to make a program available to all users if the program was installed for a user

  Basically, the problem is that I created another user account, but only a few random apps appear on it and I was REALLY looking FORWARD to having to reinstall some programs + 50 so my computer can function normally on my secondary account.  I am able to find a lot of programs installed by snooping around in Explorer and have been able to run some by creating shortcuts, but many of them (Spybot, Itunes, Google Chrome, THE LIST GOES ON!) nothing do when the .exe is open and are unusable (on this account).
  Also, I want to say there is no page support for Windows 7 that cover this topic (that I could find by using the provided search engine), and the more those (as for windows 2000) do not apply because they tell you to move files Windows has more, but it is a known problem and Microsoft should incorporate a simple way to add or remove accounts without uninstall/install programs just to be able to check a box... _ Perhaps there could even be an option for this in a very obvious place, as installed programs list of the filth or user account settings.

  Emzzey wrote:
  > Fundamentally, the problem is that I created another user account, but only a few
  > random applications appear on it and I was REALLY looking FORWARD to having to reinstall some
  > + 50 programs while my computer can run normally on my secondary account.
  > I am able to find a lot of programs installed by snooping around
  > Explore and have been able to run some by creating shortcuts, but a large number of
  > (Spybot, Itunes, Google Chrome, THE LIST GOES ON!) don't do nothing when the .exe
  endered useless (on this account).
  >
  >
  > Also, I want to say there is no page support for Windows 7, which deal with these
  > subject (that I could find using the search engine provided) and older
  > (as for windows 2000) do not apply because they tell you to move files that
  > Windows has more, but it's a known problem and Microsoft
  > should include an easy way to add/remove programs of accounts without
  > uninstall/install just to be able to check a box... _, may be
  > could even be an option for this in a very obvious place, like user account
  > settings or the bitch list installed programs!

  Any application that is properly designed to work on Windows 7
  either would give the person making the installation option to
  make the application available to all users, or do it automatically.
  by default. It is entirely the responsibility of an application
  programmers and out of Microsoft's control. Thus, the easiest way, of
  of course, is to use an application that is designed for a multi-user operating system.
  But, unfortunately, this is not always an option, where companies must rely on
  existing proprietary applications.

  If you install the legacy application places its shortcuts
  only in the start of the person performing the installation, all the
  You may need to do is to move these Start Menu entries to the same
  location in the C:\ProgramData\Microsoft\Windows\Start start\program
  folder and/or the C:\Users\Public\Public Desktop folder.

  In addition, such an incompatible application can offer additional
  "challenges:

  You may experience problems if the software has been designed to
  Win9x / Me, or if it was intended for Windows NT / 2 K/XP, Vista/Win7, but was
  poorly designed. Quite simply, the application 'knows' how
  manage individual user with different security permissions profiles
  e going to
  'banned' sections of the Windows registry or Windows protected
  system folders.

  For example, the saved data is often stored in a subfolder under the
  folder of the application in C:\Program Files - a place where it doesn't
  the inexperienced user or limited should never have write permissions.

  It may even be that the software requires 'write' access to the parties
  the registry or the files/folders to systems protected are not normally
  accessible to regular users. (He * didn't * happen if the application is)
  correctly written.) If this does not prove that that is the case, however, you
  often left with three options: either grant the required users
  privileges of senior access (either as users with power or local
  Administrators), explicitly grant privileges for normal users
  the relevant records and/or parts or the registry or replace the
  request by another who has been properly designed especially for
  WinNT / 2 K/XP/Vista/Win7.

  Some programs do not work if you connect limited account
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; q307091

  In addition, here are some tips suggested, in response to a
  another post, MS - MVP Kent W. England:

  "If your game or your application works with administrator accounts, but not with."
  limited accounts, you can set it to allow limited users to access to the
  folder Program files with 'change' ability rather than 'read' that
  is the default value.

  C:\>Cacls "Program Files\appfolder" /e /t /p user: c

  where "appfolder" is the folder where the application is installed.

  If you want to undo these changes, then run

  C:\>Cacls "Program Files\appfolder" /e /t /p user: r

  NOTE: On Win7 Icacls.exe gives more control.

  If you still have a problem with the delivery of the program or save the settings
  on limited accounts, you may need to change the permissions in the registry
  keys. Run regedit.exe and go to HKLM\Software\vendor\app, where
  the key of the Publisher of the software used to your own
  program. Change the permissions on this key to allow users full control. »

  --

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot

• Error "have sufficient privileges to complete this installation for all users of the machine. "log on as an administrator and try again the installation" when you try to install iTunes

  Original title:

  I just installed windows7, I had to uninstall itunes in order to complete the instalation of windows7. everything went well until I tried to reinstall itunes.

  During this process, I get the message "you don't have sufficient privileges to complete this installation for all users of the machine. log on as an administrator and try this installation again. ». but I am logged on as administrator.

  Hello

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

  Method 1:

  Right click on the installer for iTunes and click Run as administrator.

  Method 2:

  Disable user account control settings and check.

  Enable or disable the User Account Control

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. Disabling it can make your compromised computer. Please make sure that enable you UAC, once you have completed troubleshooting.

  Method 3:

  Allow the default Administrator and try to install it in this user account.

  a.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  b.Type in the following command and press ENTER.

  NET user administrator / active: yes

  c.Log disable the current user account and log in to the user called Administrator account.

  d.Install iTunes in this default Administrator account.

  e.Once of that installation is complete, the default administrator is disconnected.

  f. log in to your user account.

  g.Disable the default Administrator account. Follow these steps.

  i.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  II. type the following command and press ENTER.

  NET user administrator / active: No.

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

• I'm trying to get the Menu Editor 1.2.7 to work globally for all users. I added the as in the extensions folder, and it is not installed auto-magiquement.

  I would like to have the Menu Editor installed for all users. I tried putting the as file in c:\Program Files (x 86) \Mozilla Firefox\extensions in the expectation that the user would be prompted to install.

  You must rename the XPI file to the ID (GU) of the extension in the install.rdf file or just install the extension in a profile and copy the file or folder of this profile in the extensions folder.

• Toshiba drivers after installing for all users available

  Hello

  does anyone know if the drivers of Toshiba (value added Package, utilities, HWSetup) are available for all users of Windows 7 and not only for the user who installed the drivers. I configured both users on the laptop and the second user has no record of program with the Toshiba Utilities.

  John

  >... and the second user has no record of program with the Toshiba Utilities.
  Is it so important? I mean when the laptop is configured correctly, both users can use all the tools of Toshiba pre-installed and utilities.

  The two users to have the same status (Administrator / standard user)?

• Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Have now uninstalled 43 updates, the computer was not install them for at least a month. Also error code 0 x 643 on an update Please HELP...

  This problem is driving me crazy, go round in circles, trying to use microsoft update to help. No help for the moment... Error 0x8009310B code is on the rest the updates failed.

  mentioned, check if it helps.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100 MissCats Hi,

  1. Do you have the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that reset you the default Windows Update components and later try to install updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Also check out the article below and try the steps

  Method 2

  If the previous step fails, then I suggest you temporary disable the security software installed on the computer and install 5 updates at a time, to check if it helps.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.