install mouse bluetooth. computer will not be discovered.

Similar Questions

• Update Service Pack 2 is not installed, now my computer will not boot

  Hello. I recently tried to install the service pack 2 update on my computer. It did not installed. My computer is slow, so I tried restarting. It came with the screen that shows the updates are being installed. I kept the computer until it stops. When I turned it back on it would go to this same screen but with a message saying that the service pack was not installed correctly and that the computer is reverting changes. It will turn on / off power permanently. In an attempt to fix it, I managed to get in the log on screen and put in my password, but the minute I hit enter my computer started and closed the loop on endless. Anyone know what I can do?

  http://support.Microsoft.com/kb/949358/en-AU

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  The above lists some options including restoration/repair of the etc system.

• my computer will not install the update of security for Windows XP (KB2481109)

  Moderator before go Note: IE8.
  -----

  my computer will not install the update of security for Windows XP (KB2481109) can you help me.

  Hello

  (a) don't you try to install the update manually?

  (b) you get any error message?

  (c) don't you make changes to the computer until the problem occurred?

  (d) what anti-virus software is installed on your computer?

  I suggest you try the steps below and check if it helps

  Method 1:

  If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs

  Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.

  Method 2:

  I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/310353

  Make sure that return you the computer to a normal startup mode once it's done.

  Additional information: make reference in the link below:

  http://support.Microsoft.com/kb/2481109

  Hope this information is useful.

• my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330.

  original title: Itunes problem

  my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330. "What should I do?

  Contact the manufacturer (Apple) of the application (iTunes) you are having problems with.

  Uninstall all previous versions, try to download (re-record not running) and then do a right click on it and RUN AS ADMINISTRATOR.

  (Vista 32-bit or 64-bit)?

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• What does the error code 80240016? my computer will not install updates

  What does the error code 80240016? my computer will not install updates!

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  If the above does not resolve the problem:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• My computer will not install the last update of security mpam-fex64 [1] .exe. I have__Windows 7 Home premium X 64 based PC. Does anyone have any suggestions?

  My computer will not install the last update of security mpam-fex64 [1] .exe.  I have
  Windows 7 home premium, X 64 based PC.  Does anyone have any suggestions?  Windows gives me the message that the update failed.  I get the error 66 has code.

  Hello sajanclt,

  It is an update of the Forefront client. I suggest you post in the following Forefront Client Forum.
  http://social.technet.Microsoft.com/forums/en-us/category/forefront

  They will be better able to help you.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why my computer will not pick up my external hard drive?

  Why my computer will not pick up my external hard drive?
  using Windows 7 sp1

  Original title: usb

  Hello Fred,.

  Windows 7 sometimes has trouble recognizing external drives connected to the USB ports. There are a number of possible corrections for this.

  1. make sure you that the USB port in question works with another device, that you know works. For example, take a mouse that you know doesn't work and plug it into the USB port is connected. The mouse still works? If Yes, go to #2.

  2 do a reset power coercive.

  1. Unplug the power cord. Then (on a laptop) remove the battery.
  2. Unplug all USB devices.
  3. Leave it alone - don't connect or reconnect the devices for several minutes.
  4. After several minutes plug the power supply cord.
  5. Then install the battery.
  6. Turn on the computer and restart as normal without plug any USB device.
  7. Connect your devices one at a time and let them install as usual.

  The external hard drive works now? If not, go to #3.

  3. I have and others have used an application of part 3, the freeware Aomei Partition Wizard, download here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link). Once installed, you need only browse the external drive and select it, then click Properties. That's all; simply choose the drive is enough to get the drive recognized by Windows 7, no formatting required.

  I would like to know if one of these methods works for you. After back here with your results.

  Kind regards

  BearPup

• Hi I have my computer will not pick up my wireless signal, but it captures others, in small residence also other devices pick up thanks for link wrong signal strong whats for your help

  Hello

  my computer will not come up to my wireless signals same signal is strong, but it picks up other signals wireless in apartments even block
  Thanks for your help

  Hello edwardmurray21,

  Thank you for the question!

  It is disheartening to know that have problems you with the wireless signal. As I understand it, you are not able to choose wireless sugnals.

  I need to ask you some questions to help you best.

  1. what operating system is installed on the computer?

  2. which browser is installed on the computer?

  3. What is the brand and model of the router?

  Answer to us if you are having problems with the signals wireless or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• My computer will not download iTunes or Skype error APPDATA and ASL.ll

  My computer will not download iTunes or Skype because he "cannot find"APPDATA"and ASL.ll. Can anyone help?

  Hello

  1. where exactly you want to download it?

  2. What is the full error message do you get?

  3. what operating system is installed on the computer?

  4. what web browser do you use?

  I suggest refer you to the procedure and check if it helps.

  Method 1:

  I have a problem downloading Skype: https://support.skype.com/en-us/faq/FA164/i-have-a-problem-downloading-skype?fromSearchFirstPage=false

  Method 2:

  Problem installing iTunes or QuickTime for Windows: http://support.apple.com/kb/ht1926

   

  Hope this information is useful.

• My computer will not download an update, then stop not

  Original title: no closures

  My computer will not download an update, then stop not

  Hello

  Whatupdates fail to install?

  Trying to download update windows from the Microsoft Download Center and install it as an administrator.

  Here's how you install as Administrator:

  a. right-click on the Setup file and selectrun as administrator.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Computer will not update

  I use Windows xp home edition. I have McAfee Security center for virus protection. My computer will not update automatically or manually. I downloaded windows defender and it will not update and I get error code Ox80004002! Any suggestions?

  Error message when you try to install updates by using Microsoft Update or Windows Update Web site: «0 x 80004002»
  http://support.Microsoft.com/kb/956708

  TaurArian [MVP] 2005-2010 - Update Services

• : HP Quicktouch on screen has stopped working, computer will not remain once I connect.

  So looking at the forums and everywhere on the internet, I know this problem starts because of an update that I installed it. But what I'm trying to understand why my computer will not remain after that window opens after I connect, because it restarts whenever I log in. I became extremely frustrated with this issue and I really don't know what to do. of course, there is the system restore, but that work? I can't find quicktouch in my list of programs to uninstall in safe mode, because this is the only mode that will allow me to stay very long. so if anyone has the answer please help me, it's super frustrating.

  Hi cavalierfanatic247,

  Thank you for using the Microsoft answers Forum.
  

  Start on Safe Mode desktop.

  Remove the update that caused the broadcast of programs and features in Control Panel by clicking View installed updates.

  If you are not able to remove the update, use the utility window cleaning to remove the update. See the link below:
  http://support.Microsoft.com/kb/290301

  If the steps above did not fix the problem, try to restore the system to a previous point before windows update when it worked fine.

  To restore the operating system to an earlier point in time, follow these steps:

  Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  In the System Restore dialog box, click on choose another restore point and then click Next.

  In the list of restore points, click a restore point created before you started having the problem, and then click Next.

  You have an Essentials and HP drivers disk?

  If the system restore is not enough, you can use the HP Essentials and the disk drivers to uninstall and reinstall the quick key.

  Click Finish.

  You can see the link below for more information:

  http://support.Microsoft.com/kb/936212

  I hope that this will really help you, good luck.

  Kind regards
  Manasa P-Microsoft Support

• My computer will not be updated Service Pack 3 for Windows XP

  My computer will not be updated to service pack 3 for windows xp, I tried to install from the Web site, as well as through automatic updates and I'm still not able to servie pack 2 on my computer and from the service pack 1 of my other... help please!

  Original title: Windows XP updates

  Just in case:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/help-every-time-i-download-the-Service-Pack-3-for/b2ddd165-8f25-424e-8980-a55b31f87e79

• My XP computer will not open any program or website without asking "open with", tried restoring the system

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/my-computer-will-not-open-any-program-or-website/420df6df-8cf3-48e6-810b-a00c3fd04c69

  I have the same problem and when I click on system restore I am invited again to choose a program to open it with... now what?

  I have the same problem and when I click on system restore I am invited again to choose a program to open it with... now what?

  the windows system restore feature is a very important system.

  and if it is defective or failed in some way, then this may be a sign that your whole system could be damaged or unstable.

  what you can try is execution of the system via safe mode restore.

  If this does not work yet, so the next step is to move your personal files, documents, photos and send boxes out of the system because the following methods that will help restore your system can put your personal files safe.

  so after trying safe mode stage and or copy your personal files from the system, we can take the next steps.

  Incidentally, if your computer came pre-installed with windows, or you halographic disc of microsoft for the operating system?