Install Rosetta Stone on Windows 7 computer, gives the error "the requested operation requires a rise."

Similar Questions

• That's why when I type ipconfig/flushdns in windows command prompt, it shows the requested operation requires a rise?

  Why when I type ipconfig/flushdns in windows works it shows that the requested operation requires a rise?

  Because you must run the command prompt with administrator for most active IPCONFIG commands to work correctly.  Just because your account is that an administrator account does not give appropriate rights as it did in XP.  Passive commands such as interfaces to display work correctly with a normal account, but commands like release, renewal and flushdns require that you run as administrator command prompt.

• I try to install a software and I get the message "operation requires a rise."

  I try to install a software and I get the message "operation requires a rise."

  Hi, Corneille,.

  To help you, please indicate what software you want to install where you got this error message "operation requires a rise." In addition, you can also consult the resolution offered by
  RobInBlackDiamond and Steven S in this link: https://answers.microsoft.com/en-us/windows/forum/windows_7-files/the-requested-operation-requires-elevation/4d45a50e-2e5d-49f7-950c-e6281057491f?page=1

  Let us know how it goes.

  Kind regards

• Try to download Office 2003 on the new laptop running Windows 7. Get this, "the requested operation requires elevattion."

  I just new laptop to replace the old office.  It works with Windows 7 Premiure.  I am trying to download Office 2003 Pro but get this after I put in the code p/n.

  Line 12

  Code 800702E4

  The requested operation requires a rise.

  Thank you for your help.

  Did you first uninstalled any Office pre-installed trial version?

  You are installing from a cd or the installation of Office 2003 file? (A commercial version?)

  You are connected to the user win std account or did you create a guest account?

  If you are connected to the account admin win, rt click on the installation file and run it as admin

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• Hi, my old Windows XP computer died & the disc removed and installed in a box Sata/Ide.

  Hello

  My old Windows XP computer died & the disc removed and installed in a box Sata/Ide. I managed to export files, etc in my new Touchsmart Windows 7 with 310.

  My old AddressBook has been exported successfully to the "Contacts" folder, but I can't "export" of contacts to the contacts list in my Windows Live Mail program.

  I am connected to Windows Live Mail.

  Please can someone help as I am confused with the Export/Import tabs & the small windows that follow.

  All the best, fastfreddie.

  Assuming XP Outlook Express mail software, see this: http://email.about.com/od/livemaildesktoptips/qt/Import_Outlook_Express_Address_Book_into_Windows_Live_Mail.htm

• Can I use my Windows 7 Edition recovery disks Home Premium for a clean install on my old Windows XP computer?

  Hello world!  I hope someone can help.

  Can I use my Windows 7 Edition recovery disks Home Premium for a clean install on my old Windows XP computer?

  If this is a recovery from a different computer disk, you are unable to do so.

  In addition, if you were to format the computer, you will need to have a way to reinstall a copy of Windows with a genuine license.

  The best option if you need Windows 7 Home Premium is to buy a genuine license then you can make a custom (new installation).

  Where can I still get Windows 7?

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• Why Windows XP Professional give me error messages 'Bad Image'? With reference to dll32.exe files.

  Why Windows XP Professional give me error messages 'Bad Image'?

  With reference to dll32.exe files.
  \Windows\system32\MSACM32.dll is not a valid system image. Please check this against your installation diskette.
  Other messages relate to the specific 32dll.exe of the application
  It seems to me that the msacm32.dll talk of restore point for system restore.
  Thank you
  Greg

  Hello

  1. What is the number of brand and model of the computer?

  2. you remember recent changes made on the computer before the sissue?

  3. What is the service pack installed?

  4. do you have the Windows XP disc?

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

• How can I install a scanner gun to my computer without the installation CD

  How can I install a scanner gun to my computer without the installation CD

  Scanner (Canoscan 3000 ex)

  I always throw installation CD in the trash as soon as I open all newly purchased equipment.  They are often already overwhelmed.  Go to the website of manufacturers, their support/downloads/drivers section. First update the firmware (if any), then download and install the latest driver.

  For your specific case, a Canon Canoscan 3000ex operation under Windows 7, the driver is already built into Windows. Just to plug the scanner, turn on and Windows should detect it and automatically installs the driver.  Driver updates may be available via Windows Update.

• Cannot install network printer on Windows 7. Detects the printer then it says cannot locate the driver. All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions? How can I fix it?

  Cannot install network printer on Windows 7.  Detects the printer then it says cannot locate the driver.  All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions?  How can I fix it?
  Windows Server 2008 network.  Printers have ip addresses. Install the drivers from the Print Manager.  /Terminal Server Workgroup installation.

  It's the same situation with XP.  The print driver names must match.  If you notice the name of the printer driver that uses XP is a name different from the one that is installed when you plug in the device on the Windows 7 computer.  This is just my assumption, please correct me if this isn't the case.

  The real solution is to install a 32-bit driver on the XP machine that uses the same name that the 64-bit driver and share a printer using this driver or find a 64-bit driver that uses the same name as the 32-bit driver installed on XP and install the driver on XP.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Trying to install creative cloud, stops at halfway and gives me error Code: 1.

  Trying to install creative cloud, stops at halfway and gives me "error Code: 1'." When I looked at what that means, it tells me to uninstall, then try again. There is nothing to uninstall. I disabled my firewall and disable all security software. Even went to the properties to UNLOCK program to settle, giving permissions to all. Even as an administrator. Even tried in safe mode, nothing. Same mistake NEVER ONE TIME! Then I downloaded Adobe Assistant I think that another program... It installs and shows that the installed programs, but what that leaves is a folder on the desktop with the name of 2 programs, but there is nothing for them.

  Using the Support Chat from Adobe is the ONLY way it worked! It just took about an hour. But I insisted for them to take over my computer. There was much too much that they had to do, open, and delete stuff. They had to download additional software to try to solve it. They had mistakes throughout, but now installed InDesign Creative Cloud AND. As I said, ask them to do it for you because it's worth against the endless hours, I tried to resolve the question of my own, search the forums, make suggestions, without success. Once I saw my program PASSES the bar of 42%, I knew that they fixed. They will still open the program to ensure that it properly installed. If you highlight the contact on the Adobe site, answer a few questions and then click on NEED of EXTRA HELP. Then connect to the chat. TOTALLY FREE! And you just sit back and watch everything they do, for about an hour. How long approximately it is. But they know what they're doing for sure. As I said, I tried all the available on websites, forums, chats and connect them directly to my computer support, IS THE ONLY THING THAT WORKED they are awesome if you get someone who knows what they're doing, unlike only one, that I had later in the night, which had no idea. I've disconnected and got another person, which sets the creative cloud. Now the rep just fixed and installed InDesign. Save yourself the extra stress as if I was, because I was so frustrated! They are awesome

• I used to be able to open several windows 'my computer' in the start menu, now the ONLY way I can do it is via "window button + e;

  original title: opening of several "MyMachine" from the start menu

  I used to be able to open several windows 'my computer' in the start menu, now the ONLY way I can do that is by "window button + e"-I have played around with nothing works folder options.  Any help is appreciated!

  Hi Candygirl777,

  You can try! http://www.TomsHardware.com/Forum/99994-45-open-multiple-computer-Windows

• Parse error SFC "Windows Resource Protection could not perform the requested operation".

  Original title: my computer is messed up, and I'm unable to fix
   
  (1) double click on files will open in a new window
  (2) not possible to delete several records
  I tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"
  I tried to create new administrator user accounts and the problem persists.
  I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?
  I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)
  Is there something I can do?

  You could make a backup of the image to a DVD or disk.

  Renee

• Unable to share the printer attached to the XP with windows 7, receive error message: windows cannot connect to the printer: operation failed with error 0x000004f1.

  Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?

  I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6.  The printer works fine connected to the desktop computer with a parallel port.  I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features.  Please help.

  First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.
  I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063
  Thanks in advance for any help / support!

  Hello

   

  1. the two Windows XP, Windows 7 connected in a same workgroup?

  2. can you access files shared XP of Windows 7 computer?

  3. check if the printer is shared or not?

  I suggest you follow these methods and check.

  HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&prodNameId=18322&swEnvOID=228&swLang=8&mode=2&swItem=LJ-4119-3

  It is not in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=4050%20PCL6

  I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.

  http://WWW8.HP.com/us/en/support-drivers.html

  See also: networking computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_7

  I hope this helps!

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]