Install Shield 3.00.111.0 does not work on windows 7 64 bit

Similar Questions

• Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

  Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
  Can someone help me?

  Thank you

  Hi Largo09,

  Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

  As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

  In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

• I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  Thank you very much for all your suggestions. "Iwent with."

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  and it worked.

  did anyone tried the version updated? I read some rather disappointing reveiws.

  Once again my kind thanks for all your suggestions

• Cisco Anyconnect VPN does not work in windows 7 64 bit

  Hello
  I found that the cisco anyconnect (version 3, any series) does not work in windows 7 (64-bit).
  The vpn is connected, but there is not any internet access.

  I tried to solve the problems of:

  -Disabling the firewall.

  -disable the anti-virus etc.

  But while I tried using with 32 bit, it works very well.

  Also, I found that there is not a specific version of anyconnect vpn for only 64-bit.

  Do any body have the idea how to solve this problem, either it's a bug of cisco vpn itself?

  Certainly, you just need to install a later version of AnyConnect.  You need a Cisco, for example a SmartNet maintenance contract, to download the new versions.

• My on-screen keyboard does not work on Windows 7-32 bit...

  My on-screen keyboard does not work on Windows 7-32 bit...

  It displays error "could not start on-screen keyboard.

  Please help me and tell what to do...

  Hello

  • It worked before?

  I suggest you follow the methods that can help you reslove the problem below.

  Method 1:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: You can also try to disable and enable the on-screen keyboard and check if it works well or not. So follow the steps:

  1. Press the Win + U keys together to launch the accessibility.
  2. Then click on "Use the computer without a mouse or keyboard" (probably the 3rd option in the list).
  3. Then on the next page, uncheck the box that says "use on-screen keyboard.
  Method 3:

  If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  It will be useful. Let us know for help.

  Kind regards

  Ramata Thakur.

• Xerox workcentre ss16 does not work with windows 7 64-bit version

  According to Microsoft the xerox workcentre pe16 works perfectly with windows 7 64-bit version (see link http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Xerox%20WorkCentre%20PE16%20All-in-One%20Printer&v=Xerox&uid=PE16&pf=1&pi=5&c=Printers%20%26%20Scanners&sc=Multifunction&os=64-bit)

  However, in reality, it doesn't work and I can't find a driver. what Miss me?

  THX.

  If use you Windows Update, it will install a printer driver, but the scanner does not work, Xerox has not yet developed a driver for Windows 7 for this printer/scanner. The latest driver is for Windows Vista since 2008. I hope they won't disappoint us and come up with some appropriate support of Windows 7. If anyone has a work around to install the scanner, I'm all ears.

• HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

  I recently updated my operating system from Windows Vista to Windows 7 (32 bit).  Before the upgrade, my C7280 worked fine using the center of Solution and in my home wireless network.  After the upgrade to Windows 7 and download and install PS_AIO_02_Net_Full_Win_WW_130_140.exe, version 13.1.0, Solution Center does not work.

  At the opening of the solution Center, it displays disconnected printer.  Using the Wireless Setup Wizard, the printer connects to the network.  I can open the Solution Center and it works very well for about 3 seconds and then goes to the printer disconnected mode.

  I uninstalled and reinstalled the software update for Windows 7 package C7280 repeatedly and with the same results.  I downloaded and installed the patches and still no change.

  I finally had to restore my computer to original operating system.  After the computer back to its original configuration, I used the original to HP Photosmart printer disk to reinstall the driver for Windows Vista.  Everything worked as before.  Then I ran the Windows 7 Upgrade Advisor.  Yet once, he told me that the HP Photosmart C7280 printer was not compatible with Windows 7.  I uninstalled the printer driver and run Windows 7 upgrade advisor.  This time, I have not received any message about the C7280 printer.

  I installed upgrading to Windows 7 (32-bit), and then upgrade the HP Photosmart C7280 for Windows 7 32-bit driver.  Everything works fine now.

• Shaker movie 3.1 does not work with Windows 7 64 bit

  I have a DCR - IP5 camcorder and shaker movie 3.1 does not work with the 64 bit version of Windows 7. Is it possible to make it work.

  
  

• Taskmgr.exe does not work in Windows 7, 64 bit.

  Original title: taskmgr

  Since I installed W7 Pro my "taskmgr.exe" did not work.

  I found out it loads the incorrect version. It is trying to load "windows\system32\taskmgr.exe".
  I have a 64 bit OS.
  Load "windows\syswow64\taskmgr.exe".
  At least, I think that it is correct.
  How do I change Windows to load the correct version?
  Thank you

  Please provide a copy of your system information file. Type system information in the search box above the Start button and press ENTER. Select file, Export and give the file a name noting where it is located. Please download your disk from sky to share with everyone and post a link here.

  Please download and share with all copies of your system logs and Application of your event viewer on your sky drive and post a link here.

  To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, select the Action in the Menu and record all events as and give the file a name. Do the same for the application log.

  Help with Sky Drive see section 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  http://www.gerryscomputertips.co.UK/syserrors5.htm

• A VB6 application does not work under Windows 7 (32 bit). Run-time error '339'.

  Hello. I have a problem you're trying to start my program I wrote long ago on VB6. When it is run, it displays an error message: "run-time error '339': component ' COMCTL32." "OCX' is not correctly registered: a file is missing or invalid. I searched "comctl32.ocx", but it doesn't seem to be anywhere in C:\Windows (including subfolders). Using this installation - first http://www.microsoft.com/en-us/download/details.aspx?id=10019 , then System File Checker do not solve the problem - the program still does not work and ' COMCTL32. OCX' is not found. What should I do?

  Start here: http://msdn.microsoft.com/en-us/vstudio/ms788708

  This link to the download for the execution time extended to http://support.microsoft.com/kb/957924

  and

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=7030

• matrix printer does not work with windows 7 64 bit, using usb adaptor.can I install a PCI to printer so it works?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  According to Okidata it should do, but you also tried the procedure described here Manual printer driver installation?  http://my.okidata.com/pp-ML184Turbo.nsf?OpenDatabase

  

  Also check that your USB adapter is installed (Device Manager) and the computer can set the optimal settings for the port LPT adapter (properties).

• HP Color LaserJet CM1015 MFP: LaserJet CM1015 scanner does not work in Windows 10 (64-bit)

  I up graded to Windows (64-bit) 10 now the scanner on my HP Color LaserJet CM1015 MFP does not. I installed HP Universal print drivers, but apparently there is no include scanner drivers. Anyone know where I can get the drivers scanner?

  Thank you

  N ° 7

  Hi Lou,

  Basic scanning drivers built into the operating system only allow scan however a USB key.

  You can follow these steps to install the previous HP software by using compatibility mode:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03506225

  Vista drivers can be obtained directly from the following link:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1846081&swItemId=ly_51851_1&swEnvOid=2100

• Halo 2 for Windows Vista does not work on windows 7 32-bit computer

  Recently I have windows 7 installed on my computer and I installed Halo 2 for Windows Vista on this subject. I start the game, but before that I get a lot, it stops and I get a box that says Halo 2 has stopped playing for some reason any. He is looking for a solution and comes up saying that it does not find a waiting for Microsoft to find a. It happens the same thing every time.

  It seems that everything I needed an update. I went and did the updates and then began the game as administrator and it works fine now. I appreciate the help, though, and I don't know that your tips will help someone else as well. Thank you.  PS My game doesn't have the compatibility mode on it. Everything else is good. What is happening with this?

  Thank you all. Bubba

• SNMP does not work on Windows 7 64 bit

  • SNMP does not not on windows 7 64 bit CCTV, I want to communicate between my PC and a CCTV recording server.
  • In order to communicate between the registration of CCTV server, I need the snmp Protocol.  The CCTV recording server is running on Windows 7 64 bit.
  I'm trying to follow the snmp Protocol, but I keep getting errors.
  Can someone help me please.

  Hello

  Thanks for posting the request in the Microsoft community forums!
  We will guide you through this issue.

  To set up the CCTV cameras with the computer or home network, you need install and configure the software and drivers provided by the manufacturer of CCTV cameras.

  If you do not know how to configure and install CCTV cameras in Windows 7, you can contact the manufacturer.

  If you have any other questions about windows, write to us, at any time.

• Bluetooth does not work in windows 8 64-bit in the sony vaio sve15123cn model

  I have laptop sony vaio e series. Bluetooth doesn't work does not correctly. Please send me suggestions.

  Hi Lovedeep,

  1. what exactly is the problem with Bluetooth?

  2. are you referring to any Bluetooth device?

  3 have there been recent changes made on the computer before the show?

  I suggest you follow these methods and check if it helps.

  Method 1: Run the troubleshooter of material and check out la.

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then click solving problems under settings.

  c. now, type Hardware Troubleshooter in the option Search .

  d. click convenience hardware store to run the troubleshooter.

  Method 2: Check if the Bluetooth support Service is started.

  a. press the Windows key + R, typeservices.mscand press ENTER.

  b. right-click on the service namedBluetooth support Service.

  c. check to see if it is started, otherwise click Start.

  Please post back with the results and we will be happy to help you further.