LaunchAnywhere missing program files

Similar Questions

• Error: "C:\Program Files/reviversoft\Registry Reviver\unins000.msg"is missing." "Fix the problem or get a new copy of the program.

  Original title: cannot start computer

  Cannot start computer

  This response comes and does not let me start the computer (Message missing file 'C:\Program Files/reviversoft\Registry Reviver\unins000.msg "is. Fix the problem or get a new copy of the program) what should I do to get the computer?

  Hi Dan Maarsman,.
   
  -Did you change on your computer before this problem?
  -Do you have any third party registry cleaner program installed on your computer?
   

  Start your computer Safe Mode and check if you can successfully start.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  For more information, see:

  A description of the options to start in Windows XP Mode

• Ctor.dll file is missing in C:\program files\common files\Installshield\6\intel32

  Windows Vista - all of a sudden the file Ctod.dll is missing in C:\program files\common files\Installshield\6\intel32.  It won't let me uninstall a program.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What application are you trying to uninstall the system?

  It could be that the file is corrupted. I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows Vista system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  e. audit % complete.

  f. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All my programs files and personal files are missing

  All my program files are missing (menu start - click 'all programs' - and it shows 'empty'... but if I taper type in an .exe application, then right-click and run as administrator, it works.)  In addition, all of my documents and photos disappeared.  I went completely through the computer and they simply went (value years of family photos).  Winundelete tried and it did not, so I guess that they are not simply deleted.  Any help?  I'm really confused.  (for the only system restore restore point before that the problem does not help)

  Have you seen evidence that you have been infected by malicious software recently?

  In an Explorer window, click on organize, select folder and Search Options. On the view tab, select Show hidden files and folders and apply them.

  You can also use the unhide.exe program, which is located towards the end of tis section.

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-restore

• Cannot use my dvd drive. c:\Program Files (x 86) \sMedio\WinDVD11\SQPlus.dll is missing on your computer

  Cannot use my dvd player... computer box that says c:\Program Files (x 86) \sMedio\WinDVD11\SQPlus.dll is missing on your computer is displayed. Try reinstalling the program to fix this problem. I don't know how to do this. Help, please. Thank you...

  Original title: (x86)\smedio\WinDVD11\SQPlus.dll

  Hi David,

  Answer the following questions to learn more about the subject, you are faced with.

  1. What player are you running the DVD?
  2. What is the brand and model, the computer?
  3. Windows Media Center is installed on your computer?

  If you use an application of part 3^rd to run the DVD. Uninstall, reinstall the 3^rd party DVD running the application, this should solve the problem. See the following procedure to uninstall the application.

  a. press Windows + X on your keyboard.

  b. click Control Panel.

  c. on the Control Panel, select display large icons and open programs and features.

  d. right-click on the program and click Uninstall.

  Hope this helps you. Please let us know if you need assistance.

• Comment to recover missing components after having moved from "Adobe" from program files and program files on another hard drive internal?

  Hello

  I know that the title is long, but I'll try to be clear. I am currently working a lot on Premiere Pro CS6, since I else riding between movies and my drive Windows C is saturated. Jso got the real good idea to create an Adobe folder on one of my other internal drives and y 'cut and paste' (the thing never to do...) "Adobe" from program files and program files, in order to address space. So I created a file Program Files and another program with them each in a subfolder 'Adobe'. Following this bad initiative, opening again my firstsoftware, you can imagine that I had several bugs no one telling me that it lacked components (obviously) and my renderings, which once on two resulted in a "the software has stopped Monday and needs to close" (trickier).

  I have the coup d'etat switched back the folders on drive C (story of a little more drive the nail), the missing components error message no longer appears, however problems rendering and stop persistent software.  Knowing that about 15 GB is miraculously freed himself... not what is more difficult, but also probably explains the bugs...:)

  My question is the following should I uninstall and reinstall (Creative suite) where there's a you it another solution pour everything in order? Knowing it will take anyway that my C drive is dé-sature a bit.

  Thanking you sincerely pour your help, your guidance, your time.

  You cannot move a folder from one drive to another program (as you know) because that destroys the links that the operating system must have in order to run a program

  Disable this feature to unlock your serial number... Uninstall... Install fresh... also, the Adobe programs do not LIKE to install other drivers

  Move the data files to another disk to free up space on your C drive

  C drive space http://forums.adobe.com/thread/1007934?tstart=0 see answer 4 for the parameter that you must manually change... and then delete the old temporary files

• How to restore the icon of Firefox missing in Win 7 C:\Program Files (x 86) \Mozilla Firefox

  New computer that is running Windows 7. Don't install FF no problem. But the icon then disappears in the Start Menu and the taskbar.

  When I go to the location of the program C:\Program Files (x 86) \Mozilla Firefox it is only the icon generic firefox.exe.

  Program that seems to work very well, but it's embarrassing. Thanks for the help.

  I guess you mean keep the Firefox shortcut on the taskbar and Start Menu, and it's just the icon that looks like a generic Windows icon. If so, clear the cache of your icon:

  • How to recreate the Windows icon Cache. SevenForums

• wlsettings.exe complains that UXCore.dll is missing, but it is located in Program Files/Windows Live/Shared

  After the installation of Windows Live Essentials, I get now a Wlsetting.exe has stopped working.  Sometimes I get an error message wlsettings.exe can not find UXCore.dll.

  I looked in C:/Program Files/Windows Live/Shared and UXCore.dll.  I also looked in the registry and it seems that the registry database seeks also to C:\Program Files\Windows Live\Shared.
  I tried to uninstall and reinstall but no change.
  I am currently running Windows Vista.  I've read a lot about this anomaly and there seems to be a lot of people who have constantly pending problems.  I had hoped that Microsoft would have figured this out now.
  I really need a fix for this
  Hi HotDes,
   
  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  Windows Live Solution Center - Essentials installer Portal

• missing Windows Sidebar. C: Program Files Application not found.

  10 days ago everything worked fine, but now even if I want to customize my dock or I use D T the Application C:/Program Files etc not found keep appearing. Also, whenever I click on Google Chrome or IE etc etc, I get a box popping up that are asked to choose a program I want to open the file... Sidebar is gone too. Help!

  Hello
   
  1. don't you make changes before the show?
   
  As you have several questions on the computer, we recommend that you restore the computer to an earlier time when it worked very well for this problem. To restore the computer to an earlier time, try the following steps.
  1. Click Start, type system restore, click System Restore in the list.
  2. choose the appropriate date when the computer was working fine.
  3. follow the instructions in the wizard to complete the system restore process.
  4 restart the computer and check if everything is OK.
   
  For more information about system restore, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  We also recommend online virus scanner to delete all computer infections: http://onecare.live.com/site/en-us/default.htm
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• program files (x 86 missing)

  Hello! I use windows 7, 32-bit operating system.

  I can't find program files (x) 86 onmy computer...
  Please help me...
  quick response

  Hello

  Like you're on 32-bit, there is no program files (x 86). It is simply in your program files. on 64-bit systems, there are Program Files + Program Files (x 86). Why? In the simplest definition, it is necessary for the non-native programs requiring backwards compatibility to run (32-bit executables, etc.). Native programs will be installed to Program Files.

  Kind regards

  Patrick

• antivirus quarantined files in the directory of firefox as a malware program files

  These 3 files have been quarantined as viruses or Trojans heuristics:
  libegl.dll
  nssdbm3.dll
  webapprt - stub.exe

  All 3 files are in the directory program files for firefox. Once these files have been quarantined, and tried to launch FF I got error:

  Could not initialize the safety component of the application. The most likely cause is problems with files in the files of your application directory. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you leave the app and solve this problem. If you continue to use this session, you might see the incorrect application behavior when you access security features.

  Once I click OK it opens FF but it won't open the home page. I want to be sure that these are in fact FF program files and not a virus trying to wreak havoc on my laptop. Thank you.

  Unfortunately, I can not add troubleshooting information as I'm in THE writing of this since I can't open FF.

  Hello szzqz, yes judging by the names of single file, these are the files that come with firefox and which are necessary for normal operations - so it is very likely that it is a false positive of your antivirus software. just to be sure, please download the full version of firefox for your new system from the official source to https://www.mozilla.org/firefox/all/ and install it on top of your current installation, which will replace the missing files.

• "The missing config file corrupt" error message appears

  When I start my laptop, I get the "Missing config file corrupt" message and I can't start windows, it falls needs the original installation cd-rom!

  It seems that I do not have this cd? That I should?

  I don't want to just do a restore from the hard drive that I'll lose everything.

  Any ideas?

  Please, I beg you!

  Hello

  Have you tried booting in safe mode?
  If it is possible, then you can try to use the System Restore tool under Programs Accessories System Tools, you should find.

  Try to roll back the OS to the beginning. Well, if this procedure doesn't help then as said jmatthews you save files on the other computer and reinstall the operating system.

• Error 1 has occurred to C:\Program Files (x 86) \National Instruments\VideoMASTER\bin\VideoMASTER.dll\Check Size.vi of data

  Ok... Seriously I'm banging my head against the wall here.

  I'm using LabVIEW 2011 SP1.  VideoMASTER 3.1!  I have compiled mass screw on the 2011 folder.  It does nothing good.  2 machines to put up with the same versions of LV and VMS.

  I use the VBF in Image file VI niVMS to convert .vbf files to jpg.  I browse to folder of waveforms in the public domain for VideoMASTER and select the native C:\Users\Public\Documents\National Instruments\VideoMASTER\Waveforms\480p RGB OmniGen.vbf file.  I then monostable it in the same folder as the jpg file.  I get the following error:

  "Error 1 occurred in C:\Program Files (x 86) \National Instruments\VideoMASTER\bin\VideoMASTER.dll\Check Size.vi of data.

  Possible reasons:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: command requires GPIB controller charge controller. »

  On computer A, I do NOT get this error (in fact, everything works fine for all files).

  On computer B, I get the error.

  Do the same for the vbf HDMI file in the folder of waveforms and it works very well.

  Do the same for the 480 p file, but a bmp file and no error, however the bmp file is corrupted with no data.

  I need to know what is happening in the bowels of this dll.  Maybe I'm missing a codec on Machine B?  It seems that I'm missing a dependency for this file type.  If so how would I know which?  VMS I reinstalled several times.  I copied the dll over the Machine A.  I checked is NOT a licensing problem.

  Any thoughts?

  Thank you

  Jigg, with some quick research, it seems that the accident that you see can be related to do not call the niVMS function initialize before VBF to picture file feature.  Please try to run each of the screws after the launch of LabVIEW 2011 and see if you get the same results, and also adding the Initialize works in your code solves the problem.  If so, it seems that it will be your workaround solution, but we will also file a bug report; crash is not an expected way to treat this condition.

  Edit: Also, if you have other versions of LabVIEW, 2012, etc., which you can compare run this code, we would be interested in the results.

  Thank you

• Second user cannot access - Windows XP program files

  I just added my wife as a second user on my PC (Windows XP Home).  I created it as administrator too.  When you are logged as long as him, none of the programs installed under Program Files are accessible.  The icons appear on the desktop, but if I click on them, a pop-up box says windows cannot find c:\Program Files\whatever.  If I choose the option browse on the popup and click in Program Files, I get an error "C:\Program Files is not accessible.  Access Denied»  I did some research on this forum and got answers on the selection/deselection of use sharing simple file under Tools-> view-> advanced settings.  But this option is not available, because it is XP Home, XP Pro not.

  Certainly, she should be able to access the programs in this folder.  What Miss me?

  Hello

  try restarting the WIndows XP Home edition in 'safe mode', then you can see the tab 'Security' in the properties windows of the folder "Program files" - you should see that this rights:

  https://SkyDrive.live.com/#CID=23FD66EFD8D06B76&ID=23FD66EFD8D06B76%21269

  Directors - have all rights (this folder, subfolders and files)

  CREATOR OWNER - has all the rights (only files and subfolders)

  SYSTEM - has all the rights (this folder, subfolders and files)

  Users (...) -have read & run, view the contents of the file, reading (this folder, subfolders and files)

  LC

• I have a message that is displayed on my laptop whenever I turn it on it is C:\Program Files (x 86) Arcadeweb\arcadeweb32.dll

  Registry cleaner

  I have a message that is displayed on my laptop whenever I turn it on it is C:\Program Files (x 86) Arcadeweb\arcadeweb32.dll the last time I had one of these errors, I did nothing about it and lost my computer.  If you don't want do us to use a registry cleaner then how I get this error fixed? I could use all the help I can get. Please, I beg you.  Thank you.

  Hello

  Registry cleaners and system optimizers who attest her can solve many questions are simply too hype
  powder of snake oil. More likely to damage the system to fix anything.

  Good luck which is malware then please do a thorough check. Following message will show how to remove as
  a startup message.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in the box-

  sfc/scannow

  Then run checkdisk (chkdsk).

  RUN - type in the box-

  Chkdsk /f /r

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">