Install the driver audio error.

Similar Questions

• Try to install the driver, get error "no program associated to open. BIN file"XP

  Trying to download and install a driver and a version update system for my Zoom H4n recorder, I get an error message that says something like "no program associated to open. BIN files. How can I fix this so I can manage my music. Thank you!

  This is how you do it .

• Try to install the driver, but will not install correctly, ArcSoft Photolmpression 6.

  Windows 7 no Photofix Copier of Summit, do not to install the driver properly error. Any help for this old surfer of money with the early stages of dementia would be much appreciated.
  Thanks to all who can help.
  Concerning
  TREV

  I think you will find that your Copier, Photfix, is not compatible with win7, according to many other messages from various sites.

  You could try the free trial of http://www.hamrick.com/ but be aware that if it works, and you decide to buy its probably at a cost similar to you buy a compatible scanner.

  BTW, the title line of your post is not really applicable to your question/problem.

• I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success.

  original text: P17.sys

  I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...

  Hello

  1. What is the exact error message you get?
  2. Are you not sound on the computer or Rocketfish?

  If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Otherwise, I suggest you to give us more information about the issue, so that we can help you better.

  It will be useful.

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• Install the driver error: "insufficient system resources exist to complete the requested service."

  When starting my computer (Dell laptop) Vista, it asks to install the Broadcom Ethernet driver.  I click "locate and install driver software" and it returns the error:
  Install the driver error: "insufficient system resources exist to complete the requested service."

  How can I fix?

  Hello

  ·         What antivirus software or security is installed on your computer?

  ·         Did you recently change on computers such as installing any application?

  Step 1:

  Temporarily try to disable the antivirus on the computer program and check if the problem persists.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Step 2:

  I also suggest you to download the drivers from the Dell website and check if it helps.

• Installed the driver for Lifechat lx300, but can not hear the audio in media player

  I have a new helmet. I installed the driver but can not hear the audio in media player

  Hello

  I suggest you to visit the links below that would solve your problem.

  Step 1: Turn sounds into the lifestyle cat helmet

  http://support.Microsoft.com/kb/935749

  Additional information: a. tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  b. no sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope this information is helpful and let me know if you need additional assistance.

• HP M477fdn printers have been impossible to install the driver for some users. We receive the error message following '0 x 00000006 '.

  have been unable to install the driver for some users. We do not receive the following error message.

  Error: 0 x 00000006

  Hi Sameer,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I would like to know some information.

  1. You are connected to a domain network?

  2. When exactly do you get this error code?

  3. Do you also have any error message?

  This problem may occur if the print spooler service is stopped.

  To start the spooler service, follow these steps:

  1. click on Startand then click Control Panel.

  2. double-click Administrative Toolsand then click Services.

  3. double-click on the Printer Spooler service and then change the startup type to Automatic. This option sets the spooler service starts automatically when you restart the computer.

  4. If you want to start the spooler service immediately, click Start in the area of The State of the Service .

  I would also refer to the Microsoft Help Article below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Printer installation error (could not install the driver, error 28)

  I just bought a new printer (Epson XP-204) and tried to install it on my laptop Dell XPS15 (running edition W7 home 64-bit).

  After you have installed the software and drivers, I connected the printer to a USB port, Windows detects it and started to install the driver. After a few seconds, I got an error message telling me that it was an error and the driver could not be installed (error 28).
  I managed to make the printer works by using its WiFi connectivity, but now, I found ALL my USB printers have disappeared and I can't use it anymore. Whenever I plug a printer into the USB port, I get the same message with error 28. What is happening on printers that worked very well until I tried to install the new Epson in the USB port.
  I tried to restore the system to the State prior to the installation, but the system restore fails to complete and return an error message.
  All my USB devices work ok (mouse, storage, debuggers, etc) the problem only occurs with the printers.
  I tried to start in safe mode and remove all USB devices, but after mounting them again once the error occurs again.
  I don't know what else to do (reinstallation of the operating system is not an option, and if I do, I swear I'll go to Linux).
  No idea?

  Hello

  Problem solved!
  After reading this page: http://www.asyndetic.com/blog/2010/02/06/debugging-usb-device-installation-on-windows/ I found it lacking the USB.inf file in my system too (I don't know why or how it has been deleted).
  I copied the file from another machine, removed the printer in Device Manager, rescan the devices and Windows found and installed all the drivers with success!
  Thanks for your time,
  Fabio Pereira

• Install the driver Officejet 6500 fatal error

  I'm trying to install the driver for my Officejet 6500 on a Windows Vista platform. Whenever I try happens to about 38% of software installation and the disc stops spinning and I get a "Fatal Error MSI.netdevicemanager01"

  I tried to restart the computer, the printer and the ethernet.

  I am trying to connect wireless. My computer can see the printer, but I can't get the driver to download to be able to send to the printer.

  Someone at - it ideas/suggestions on how should I proceed to get this installed? A wired connection is not an option, and I need to access this printer.

  I tried to install from the CD and complete and explicit page HP versions. We get the same fatal error every time all 3 sources.

  Any help would be greatly appreciated

  I was able to resolve myself.

  In the Panel, I chose printers > add printer. I selected the option without wireless/Bluetooth.

  I took care to wait for all of the printers that it detected were loaded. I found myself choosing the second listing of the printer that I want - with the IP showing.

  I clicked on install. I was asked to choose my manufacturer or say if I had a disc. I chose the installation of the drive.

  He urged them an 'install from' option to select a destination to install from. I sailed on my installation disc and the Autorun feature on the disc.

  He said 'installation' for a while. Then he gave me a print test option. I sent a print with a total success and can now access the printer from my computer.

  Has had a total of 5 minutes.

• How to install the driver dv6 6165tx UEFI?

  Hello...

  Guys it's Marie Laure could you help me with my problem.

  I have a laptop hp pavilion dv6 6165 tx... so, during statup operating system is showing that the the system fan is not working properly - F(1B) and I want to install UEFI driver for this problem to be solved.

  IAM unable to install UEFI driver using my flash drive. During the installation, it's show to make a partion on the disk.

  So, how to make this partition and install the driver from the UEFI. If anyone can help, it will be a great relief for me.

  Sorry, but try to install UEFI utility or support environment will not solve your problem. Most likely, you will need to clean or replace the fan to make the error message disappears.

  Please send BRAVO

• Photosmart C410A: Cannot install the Driver

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD APU A8-3820 with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5844
  Graphics card: AMD Radeon HD 6550D, 256 MB
  Hard disks: C: Total - Mo 940455, Free - Mo 855102; H: total - Mo 305234, Free - 170309 MB; Total I: - 7 MB, free - 0 MB;
  Motherboard: gateway, SX2370
  Antivirus: Norton Internet Security, updated and activated

  Apparently after a Windows Update, computer of my wife, which is connected to our printer via ethernet through our Linksys E3000 router connection, lost that connection. As the driver was out of date anyway, I downloaded just the updated driver and tried to install it after checking that all traces of the old version have been removed using the HP uninstaller program.

  Inummerable times today, tried to install the driver. I either get the the point where installation asks what kind of connection I have and when it shows via ethernet I get an error message about the MpsSvc (Windows 7 firewall) be stopped or the installation fails generate a message that says missing a setupfile. I tried to disable the firewall in Norton Internet Security and AV and the installation always fails. I tried to turn on the Windows Firewall, via the the Task Manager (with the NIS firewall off) nothing works.

  One of the solutions I found on this forum with an HP Expert was to use the complete package to install the driver. Even if I'm NOT all the programs that come with it (there is the possibility to choose what you wanted but not more) I tried. I still received the message to set firewall scenario and then had to uninstall all the programs I didn't want in the first place.

  There are two other computers in the House connected wireless to the printer and both work very well. I even tried the road wireless with this computer, nothing is done.

  I know I'm not the only one we encounter this problem as I saw other postings but I have yet to see a solution that works. I'm trying not to get both frustrated and angry but it must be an otherwise difficult problem to solve. Before the update Windows and update the driver of HP, this computer worked fine with this printer. There is a conflict between HP software and Windows 7. Please give me a solution that actually works.

  I finally found a relatively simple solution that worked. First of all, I unzipped the driver of a CD-based package. Then, I clicked on the Start button and open "devices and printers". Then I clcked on "add a printer".  I chose "add a network printer". As Windows did not have the selected HP C410a among the choices of the printer, I have disk driver and connected to the CD file. Windows finds the driver, installed and everything works as it should. Certainly, the icon of the printer is not the C410A but all the functionality of software works so I don't care.

  On my wife's computer, I followed the same procedure except that I chose the option "Local printer", as his office is connected to the router via an ethernet cable. For some reason, his computer also had the HP C410A among printers whose drivers available and Windows loading automatically good. Everything is fine with his computer in terms be able to print. Again, not the cool little icon C410A under "Devices and printers", but it works.

  The really good part of doing it this way is that I didn't have to install all the unwanted HP softerware which comes with the "complete package".

  I appreciate everyone's help.

• Installing the driver on the Qosmio G20

  I have a G20 machine (bought from the Japan) and I want to install my copy of XP pro.

  XP Setup works well until the end, then I start to install the driver and the software as suggested by Toshiba:

  acoustic silencer V1.00.005A
  help V1.02.00_TINASSIST_NUER20MA
  --> NOT INSTALLED atheros wlan 802.11ag / utility V3.1.2.19I123 g
  --> Bluetooth has NOT BEEN followed V2.0 (B20041111)
  Toshiba bluetooth stack V3.3.10.01 BUILD20041209
  Texas instruments pcixx21 flashmedia driver V1.0.2.1 INSTALLER BUGFIX
  Utility Intel chipset software installation V6.1.0.1008
  common modules V6.02.04
  ConfigFree V5.00.48
  controls V3.16.2400
  display the change of aircraft V1.6.0.0 utility
  NVIDIA geforce go 6600 display V6.14.10.7118 driver
  Hotkey to display V2.8.0.0 - 00 - XP
  fix for "cumulative security update for ie ' Q834707
  fix for "question in hyperterminal could allow code execution" KB873339
  fix for 'problem in the kernel windows and lsass' KB885835
  fix for "issue in wordpad could allow code execution" KB885836
  fix for 'windows firewall only my network (or subnet)' KB886185
  --> NOT INSTALLED hardware (dep) - active computer may quit unexpectedly after recovery from sleep mode or hibernation in windows xp service pack 2 Q889673
  SM214710AD2 Toshiba software modem
  V8.0.1.1 card WIRELESS Intel(r) pro/100 ve
  PC V3.1.0 diagnostic tool
  development of picture V2.7.0.2 utility
  V7.05.04 energy saving
  Toshiba V1.00.0013 for NUR20 raid driver
  utility RAID V1.2.0.25
  SD V2.0.2.1A memory card format
  secure module SD V1.0.2
  SoundMax integrated digital audio V5.12.01.5240U
  --> NOT INSTALLED sun java 2 runtime environment V1.5.0
  Touch and the launch of V1.2.7.0
  V6.0.304.6 Alps pointing device driver
  Press the start/stop utility V2.05.00
  utilities V4.20.26
  Virtual sound v1.00.05UPDATE
  V2.0.0.5 wireless keyboard shortcut
  wireless network card mini pci Atheros ar5001x V3.1.2.45
  Intel wireless b/g V9.0.1.9 lan driver
  utility V2.0.0.20C zoom

  In addition to the above, I have install the driver of TV tuner driver DVD RAM, the utility Maximizer and does not have the cause of the Atheros 802.11 driver, it seems, the machine has a network card Intel (is true?)

  But when I arrived at the end of this procedure the system starts and works fine the first time, but when I restart the machine that the hourglass will for centuries and I need to restart in safe mode using the Manager tasks.

  I have a feeling that the problem is related to the utility Configfree or be WIFI.

  I tried to uninstall the Configfree but the problem is still there!

  There, can someone help me? !!

  Hello

  You are right. If the device has an Intel WLan card you n t need to install Atheros utility and Atheros WLan driver. But you need the Intel WLan driver.
  I don t think that the problem is the utility Configfree. In my opinion you should check into the full background due to CPU performance process using Task Manager.

  Good bye

• Problems installing the driver for the ToolsCD - Satellite P100-277

  Hello

  I got a Satellite P100-277, I have formatted and reinstalled windows xp on due to virus issues.

  Before I did it, I copied the folder "toolscd" of the HD intern on my external HD.
  Now, I reinstalled all the drivers, but with some drivers, there is no setup.exe and I do not understand how I can install these drivers then.

  For example, my audio driver, the 'Driver Sound' folder contains DLL, SYS, XML, CAT and INI files.
  But I don't know how I can install the driver.

  I hope you guys can help me out here, thx!

  > Now, I reinstalled all the drivers, but with some drivers, there is no setup.exe and I do not understand how I can install these drivers then.

  Some drivers must be installed in the Device Manager.
  Mark the device, push the button update driver and point to the files that are stored on your HARD drive

  Good bye

• Satellite A100-599 - cannot install the driver for nVidia GeForce Go 7600 graphics card

  Greetings to all!

  Try to install the driver for Nvidia GeForce Go 7600 after reinstallation of the entire system, but without success. Only safe mode is available after this pilot plant, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result always :(

  Would be happy to be aware of how this problem... Thank you very much.
  Satellite A100-599
  Current OS: Windpws Vista Home premium sp1.

  Post edited by: Airtoground

  Hey,.

  > but without success.
  Does that mean exactly? You get an error during installation or what exactly is going on?

  > Only safe mode is available after the installation of this driver
  Why only safe mode is available? What happens if you start Windows in normal mode?

  And before you start a lengthy discussion: what laptop do you have?

  You may notice no problem if you install Windows recovery disk Toshiba?