XBox 360 can not find the PC on the network

Similar Questions

• Windows 7 can not find the network

  Hi guys I hope that someone can help me, I walked trough the forums but none of the above helped me. I also do not really understand some of them. But that's what happened. My internet was fine yesterday, I was watching some stuff on aliexpress when my mouse froze, I tried to restart the laptop, but nothing worked so I had to remove the battery. After that the computer took forever to turn back and when he did my computer did not find my wifi more. I ran the following anti-virus, I tried the steps in the verification of all past system. I went in Sync Center, I have trid addition in manual, I tried to search for a wifi switch (I don't think I have a) I tried to restart the pc and the internet, I tried the system restore, I don't really know what else to do. Any suggestions?

  Hi Kate,.

  Thanks for posting your query in Microsoft Community.

  I understand that Windows 7 can't find the network and I appreciate the efforts made to try the patches. Let me ask you;

  • Restoring the system led?
  • What exactly happens when you try to connect to the Wi - Fi?

  This could be due to several reasons, including any third party software conflict. Try the following methods and check.

  Method 1: Start the computer in Mode safe mode with network and check if the problem persists. If the problem does not persist in SafeMode with network, put the computer in a clean boot state and check.

  Step 1: Start the computer using safe mode with networking

  Safe mode with networking is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Safe Mode with networking appears in the corners of your monitor to identify which Windows mode you are using. You can use the internet connection in this mode.

  Please refer to: , start your computer in safe mode

  Step 2: Perform a clean boot in order to avoid any conflict of third party software.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Update the network adapter

  Step 1: Update the driver through Device Manager

  a. click Start , type Device Manager and click on it

  b. expand network adapters

  c. make a right click driver, and then click Update driver software

  Step 2: Install the Windows updates pending

  To check the updates:

  1. Open Windows Update by clicking the Start button . In the search box, type Update, and then in the list of results, click Windows Update.

  2. In the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  3. If you see a message telling you that important updates are available, or you say to look at the important updates, click the message to view and select the updates to install.

  4. In the list, click the important updates for more information. Select the check boxes for the updates that you want to install and then click OK.

  5. Click install updates.

     Read and accept the terms of the license and then click Finish if the update requires it. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Step 3: Visit the computer manufacturer's support Web site and install the latest network for Windows 8 for the same model of device drivers.

  Additional information:

  Wireless and wired network problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• HP Photosmart C309a AiO Wireless on and work, can not find the network!

  My printer has stopped printing a couple of days.  It was fine, now it is not.  The blue light wireless radio is turned on, but when I run the network set in place, it works simply and can not find my network.  I ran the network diagnostic and it detects my network, but can't find my printer.  On the test page, it fails on SSID.  I could use some help to get this operational back guys!  Thank you!

  Well, I can't comment officially, but I'm sure that has been discussed in, and design changes avoid this problem.

  Regarding something is through HP, you could call the HP Technical Support and check if you have options to upgrade to a new printer. They should have a list of printers and prices offered as part of the upgrade process. There is no charge to call and check the options you have. If you are in the United States, call the 1-800-474-6836. Otherwise, click on the contact HP link at the top of this page.

• can not find the network

  I had connected to the wifi network, for a while, it worked and after the connection has been broken and i went again for start to connect to
  the message was windows cannot find any nwetwork, and I can diagoned the problem and then gave Start Wireless service
  then the message is Please contact your system administrator or internet service provider.
  I tried to set up a new connection or network, and then the error message is the guid of the component : {7071eca3-663b-4bc1-a1fa-b97f3b917c55}
  component file:[c:\windows\system32\connect.dll]
  Error: (0x8007277b)
  more information
  could not detect internet connectivity

  will have compaq presario model is cq 45 106 AU wnidows vista service pack 1

  Please help to recover from this problem

  Kind regards

  Charles r

  Hi nizar,.

  I suggest that you perform a repair installation.

  Repair facility:

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or an upgrade on the spot with the following steps: (Note: this still does not resolve all problems, especially if the corruption was caused by a 3rd party program or service, you may need to do a clean install) (if this is not successful.)

  <><><><><><><><><><><><>

  Please make sure that you back up all the important data before you continue. Please visit: methods for your backup files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><>

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  Note: Tit the following settings is reset by default:

  Its computer system

  Device drivers

  Visual effects

  Windows Mail

  Windows services

  If you notice missing files after the upgrade, look in the following folders:

  C:\Windows.old

  C:\$INPLACE.~TR

  C:\$WINDOWS.~Q

  These files can be eliminated with disk cleanup as "records destroyed by upgrade to Windows".

  Delete files using disk cleanup

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WiFi constantly fall, becomes very slow or can not find the network

  You just bought a new Sony Vaio with Windows 8 and the wifi keeps deleting, becomes extremely slow or can't find my home network. I know that it is not the router because my other two laptops work fine and have full wifi signal (1 running Windows 7, the other is Windows Vista). I tried using the troubleshooting and it cannot solve the problem (if it is said) and claims that my ethernet cable or cable router is not connected (does not solve anything because my problem is wifi, not on the cable).

  Perform a search on Google, it seems that it is a major problem with Windows 8.  Anyone have any ideas on how to solve this problem, before returning the laptop? (the question of the internet makes the laptop almost unusable because most of my things are on the cloud)

  Hi samir,.

  Thanks for the reply.

  You can try to download the drivers from the link below.

  Drivers, Firmware & Software

  http://eSupport.Sony.com/us/p/select-System.pl?Director=driver

  It will be useful.

• Can not find the network controller driver please help

  Hi, I just did a full erase and reinstall and I can't find my network controller driver, I installed about 50 of them, read many messages, I've tried everything that someone please help...

  Windows 7 Ultimate x 64
  G6-1c40ca
  PCI\VEN_14E4 & DEV_4747 & SUBSYS_1795103C & REV_01
  PCI\VEN_14E4 & DEV_4747 & SUBSYS_1795103C
  PCI\VEN_14E4 & DEV_4747 & CC_028000
  PCI\VEN_14E4 & DEV_4747 & CC_0280

  This should be the driver Broadcom wireless lan to your laptop.

  Best regards

  ERICO

• Can not find the network drivers: DEV_4727 SUBSYS_1795103C REV_01 VEN_14E4

  I just put a new install of Windows 7 on my laptop and I can't identify the wireless network drivers I need to install.

  Is the hardware ID: PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01

  Try the Broadcom for Windows 7 wireless LAN driver: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&dlc=en&lc=en

• Can not find the network controller PCI device

  PCI hardware ID are:

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1858103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1858103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  Material for the network controller IDS are:

  CPI\VEN_168C & DEV_0032 & SUBSY_1785103C & REV_01

  CPI\VEN_168C & DEV_0032 & SUBSY_1785103C

  CPI\VEN_168C & DEV_0032 & SCC_028000

  CPI\VEN_168C & DEV_0032 & SCC_0280

  Hello:

  The 168 is this one...

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

  The other is...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104710-1&cc=us&DLC=en&LC=en&OS=4062&product=5277691&sw_lang

  Paul

• I have a windows vista Home premium and want to connect to a network that is set up on a workstation after running windows 7 can not find the network why?

  Why my computer running windows, find a different network than the vista of cant

  If collective housing is installed on the Windows 7 computer, only Windows 7 computers can join a home group.

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Networking of computers running different versions of Windows

  This article describes how to configure files and printers, sharing on a home network with computers running different versions of windows.

  See you soon.

  Mick Murphy - Microsoft partner

• Can not find the network work dc7700 SFF driver

  I recently reinstalled Windows XP Pro on a dc7700 SFF machine and while the XP installation went without a hitch I can't install an ethernet driver.

  I tried to use all the 5 drivers from this page without success.

  I did some quick research and it doesn't seem to be a wide spread question.

  Windows detects hardware in the device as "ethernet controller" Manager without a driver installed.

  Running the Intel and Broadcom driver installs guest messages "no card detected Intel/Broadcom.

  Any other ideas? The machine is out of warranty since 2010.

  Hello:

  In my view, it has the Intel card and for some reason any HP driver Intel doesn't work.

  Use it to Intel, and you should be good to go. First download listed is for XP 32 bit.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&lang=eng&OSVersion=Windows%20XP%20 * & DownloadType = drivers

  Paul

• I'm trying to convert a PDF file to a Word Doc.  I click on convert and then connect and it says can not find the network.

  I get a network error when I try to connect to the sidebar of a PDF file that I am trying to convert.  How can I fix it?

  Hi christinemsd,

  Looks like you can try to access the service through Adobe Reader. What happens if you connect directly to https://cloud.acrobat.com ?

  Best,

  Sara

• Can not find the downloaded file

  I regularly download files, and they will 'always' in the same directory. Now, I downloaded fedora-live-workstation-i686-22-3.iso
  of https://getfedora.org/en/workstation/download/and (a) I didn't get the usual "save/open" Download dialog and (b) I can not find the downloaded file. The < downloads - tools > FF screen displays the file as downloaded, but not (AFAICT) where he was placed.

  Any clarification would be appreciated. Thank you.

  (OP) Well, I downloaded the same file again and this time everything went as it should. For example, some of my 'facts' above must be wrong, but I don't know who. I suspect some personal deficiencies.

• Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?

  Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?

  Well you can press Ctrl + Enter or you could re - turn on the menu and the toolbar https://support.mozilla.org/en-US/kb/display-thunderbird-menus-and-toolbar .

• can not find the wireless network

  Hello

  I hope someone can help. Today, I got a new installed wireless router. Until now my main and most recent computer can connect to the internet fine (so I know this isn't a network problem), but my old computer does not find the network when scherching of available networks, it may pick up other networks and communicate with them simply not my own. It is the first time that I am trying to connect to this wireless computer.

  The computer is a HP pavilion t770.uk Windows xp sp3.

  You need to replace the network adapter. The current NIC is older than the specification of N, so it can not communicate with this Protocol.

  You can try to configure your router and the new pc to use b, if they allow.

• can not find the sleep settings screen on ubuntu 11.10

  can not find the sleep settings screen in ubuntu 11.10

  http://UbuntuForums.org/