Install the map does not?

Similar Questions

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• Double-click on the graph in the map does not work

  Hello
  I had created an application where the user can click on the map and a marker will be created and it stores values x y and stored in the database and the user can also drag the marker and place it in the appropriate position and after the user drag and drop the marker we have a "confirm" to send the values of y from x to the database. I need to remove that confirm the button and replace only with double click where user double clicks on the marker settings must pass.
  
  To drag the marker, I use the mousedown event, but when I add the doubleclick event his does not work
  
  gr.doubleClickEnabled = true;
  gr.addEventListener (MouseEvent.DOUBLE_CLICK, registerComplaint);
  gr.addEventListener (MouseEvent.MOUSE_DOWN, mousedownGraphic);
  
  even when I comment on the mouse to the bottom of the double click event on the graphic marker does not work.
  
  Help me in this task I need to do urgently.
  
  Concerning
  Arun Mohan

  While I can't possibly guess the cause of your problem, there is an easy solution for this.

  ...
  // record the time for the last mouse down
  private var _lastMouseDownTime:uint = new Date().time;
  // how fast the second mouse down needs to be to qualify for double click
  private var _doubleClickThreshold:uint = 500;
  ...
  // traces mouse down and double click
  private function mouseDown(e:MouseEvent):void {
              trace("mousedown");
              var mouseDownTime:uint = new Date().time;
              if(mouseDownTime - _lastMouseDownTime <= _doubleClickThreshold){
                  trace("doubleclick");
              }
              _lastMouseDownTime = mouseDownTime;
  }
  

• In google maps, after seeing satellite or view, links on the map does not work, I have to charge google maps and start all over again

  When I open google maps, the links displayed on the maps can be used. However, if I change to a view street or satellite view and then return to the display of the base map, links displayed on the map is no longer working. I have to leave google maps and reload to get the links to work again.

  Hello peterronald, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Install the laptop does not not after last update 09/06/10

  I have installed a number of updates (multiple) who had downloaded as I closed on June 9, 2010.  When I turned on the laptop yesterday, it will display the DELL BIOS screen over and over.  I get no message or an error code and could not connect in safe mode.  If I don't stop, the system runs just this page, the screen goes black for a second and reload the page. Any suggestions?

  Hi lahlahbe,

  If you are not able to boot normally to the desktop, then you can follow the steps in this link to do a repair of the boot or system restore booting from the full version of Vista disc to boot up to the desktop:

  Step 1: Repair of the boot or system restore starting from version full Vista disc

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Step 2: When you are able to start normally, check the update history to discover updates recently installed and has not by following the link:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Update the maps does not work after 10.3.2.440 blackBerry 10

  My Z10 has recently been updated with ATT 10.3.2.440.  Since the update, "Maps" do not work properly.  The opening, I see the map, with my current position, but I'm unable to find anything or to plan directions.  The application displays "content is not available.  The content of my site is currently unavailable. »

  I tried to reset the device using the volume keys, but no improvement with this problem.

  Thanks for any help / advice.

  Well D

  Hello

  BB today released a new version of MAPS... I suggest get via BBWorld and then try again.

  Good luck and let us know!

• The mapping does not work

  Hello
  
  I try to make a simple mapping
  
  Source: JMT_PWD (login, pwd)
  destination: JMT_PWD (login, pwd, test) with test = pwd
  
  When I start replicat I got the below error
  

  2011-10-09 14:39:15  ERROR   OGG-00918  Oracle GoldenGate Delivery for Oracle, rep9.prm:  Key column TEST is missing from map.
  2011-10-09 14:39:15  ERROR   OGG-01668  Oracle GoldenGate Delivery for Oracle, rep9.prm:  PROCESS ABENDING.

  What's wrong?
  
  Thanks for your help
  
  below my params for replicat
  

  replicat rep9
  setenv (oracle_sid=T4F)
  userid ogg,password ogg_pwd
  handlecollisions
  assumetargetdefs
  discardfile /tst/data/ogg/discards/resp.dsc,purge
  reperror default discard
  map SIEBEL.*, target SIEBEL.*;
  sourcedefs ./dirdef/ext9.def
  dboptions deferrefconst
  MAP "SIEBEL.JMT_PWD", TARGET "SIEBEL.JMT_PWD", COLMAP (TEST=PWD);

  You saying that you map the tables more than 5000, as in, you modify the column names or adding adding columns? It is not really clear.

  Let's say you have two types of source tables: those which maps directly through and those who will have a few changes (not to use a column, add a column, use a different name, etc.). The straight line through tables can use assumetargetdefs and passthru, right? Why waste time with GoldenGate looks up a definition just to know a table is the same? The other tables can be in a group where you (have to) use sourcedefs because there are differences; the tables do not meet the rules to be the same.

• INSTALL the button does not illuminate?

  Windows XP, IE 8.0, Norton IS

  I am trying to install Flash Player 10.2. The download happens correctly. Then a window opens with 2 buttons: quit smoking and install it. The install button is not on. What should do?

  Hi, you had asked me :-) I'm sure that you have a window that the last time I looked was red. Quitting smoking is on the left side and the installation is done on the right side. Take a look just above or beside the Word Quit. There should be a small box "accept." Don't forget to click on the first (it is hard to see sometimes), then on the link to install will be active.

  Let me know if this isn't the problem that you are experiencing.

  Thank you

  eidnolb

• Install the SNYC does not not on new FF

  The Department'S work deleted and reinstalled FF on my work PC to my request for a number of e-mail client. When I logged onto my account FF Sync and nothing to synchronize. Let him on it during the night thinking that he could do then. When I got home there was a message on my PC at home saying that he had a problem with the sync. I clicked on the button and it went to the preferences page of sync on my PC at home. Everything looked like I had it a long time ago. All PC were broadcast that latest versions of FF
  The next day at work it was synced anything. I closed and open FF waited and still nothing. The message on my House still PC appears.
  suggestions?
  Thank you
  KLund1

  Try to delete the signedInUser.json file in the Firefox profile folder and delete the folder of weaving (Sync was formerly known as armor).
  If that is not enough then delete the prefs.js file to reset the prefs and may also remove the compatibility.ini file to reset the profile.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Preferences_not_saved

• Install the card does not

  In creative cloud > Preferences > creative cloud > Apps, everything is gray and I can't make changes. Is the same for the location of the folder in the files tab. How to make it editable again?

  I'm under cloud Creative v2.3.0.151 on OS X El Capitan (10.11).

  

  Thank you. I don't know what happened, but it seems to automatically set after a day or two.

• Error 1327.Invalid Drive: G:\ mapped to a user folder. The drive does not exist or could not be conn

  Error 1327.Invalid Drive: G:\ mapped to a user folder. The drive does not exist or could not be connected. You can disconnect the drive or reassign the drive letter. For details see http://kb2.adobe.com/cps/404/kb404946.html

  Hi jamal d w,.

  Please see the KB Doc to install error 1327. "Invalid drive" | CS4, CS5, Acrobat Reader | Windows - ive.html http://helpx.adobe.com/creative-suite/kb/install-error-1327-invalid-dr which explains how to solve your current problem.

• Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash

  Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash. I use a dell high spec, less than a year using windows 7 Home premium processor Intel (r) Pentium (r) CPU P6100 @ 2.00 GHz, 1999 Mhz, 2 Lossnay, 2 logic and McAfee Firewall and AV processors

  Thank you so much for pointing me in the right direction... Unfortunately, the link does not work but I bypassed using a part of the link, I did a search on google and found the plugin here. Adobe.com/Get/flashplayer/Current/install_flash_player.exe

  Thank you so much,.

  Johnny 777777

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  Hello

  1. what happens when you try to start the game?
  2. do you have messages or error codes?

  Follow the steps in the article mentioned below and check if this solves the problem.

  Known graphics issues in Rise of Nations
  http://support.Microsoft.com/kb/820089

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support