Install the new - cannot ping configured gateway or DNS servers

Hi all

My old VMWare ESXi 3.5 OS got corrupted I did a fresh install of VMWare ESXi 4. It installed ok and I was able to configure everything successfully, but when I run the network test it is impossible to ping anything whatsoever, but it's own IP address.

I have another machine on the same subnet with the same exact configuration (except for the hostname and IP static) settings and it works properly without any problem.

I already checked the cable at the back and the green light is on and the flashing. I tried to restart the machine after having placed in the configuration information and settings remained at what I put in, but I still get the same result. The network test is a failure.

Does anyone have any suggestions as to what could be the cause of this?

How do you have installed and configured network adapters?  Have you tried swapping the cables between network cards?

Also, do you have the trunks VLAN configured on the switch?  It is possible, that you must specify a trunk VLAN for the management network to do the work.  That would probably have already been configured on your host 3.5 but is not automatically detected and added.

Tags: VMware

Similar Questions

  • When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the ul bar and not even leave the firefox avecjoint

    When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the bar ul and can leave not even firefox without using ctrl-alt-del and opening a master and have it at the end of program. Help, please.

    You may have a corrupted file xulstore.json .
    https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

  • Cannot install the new version of AVG antivirus error oxcoo70643

    Original title: I'm trying to load a new free version of avg, but I get an error code oxcoo70643 which says that they cannot delete wonderful version
    I'm trying to load a new free version of AVG, but whenever I get this day it is said that the version of filtration can be removed with an error number, advocacy of ideas

    Hello
    Try to manually uninstall the previous version of the AVG software from programs and features list and then install the new version and check if this is useful.

    See the link below for more information on uninstalling a program in Windows XP.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    You can also post the question on the link provided below for assistance

    http://forums.Avg.com/ww-en/AVG-forums?sec=theme&Act=show&ID=230

  • Try to install the new copy off error vista WINDOWS CANNOT OPEN THE REQUIRED FILE 0x8007000D

    OT: Hey tried down laptop restore none tried to install the new copy off vista prem with no joy only error 0x8007000D WINDOWS can NOT OPEN THE REQUIRED of joy

    Portable Hi down tried restore none tried to install the new copy off vista prem with no joy only error 0x8007000D comes WINDOWS CANNOT OPEN THE REQUIRED FILE of joy

    Hi jamesgillwn,

    1. when exactly you get this error message?
    2. what disc do you use to reinstall?
    3. What is the exact error that appears when you try to start?
    4. at what point of the installation you get the error message?

    After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

    First check if you have scratches or dust on the disc and clean the surface and try again.

    To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

    Try the steps from the following link:

    Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

    http://support.Microsoft.com/kb/930984

    Note: When you perform the installation, you will lose the data, make sure that you need to backup your data before you perform the installation.

  • Installed the new HD - cannot set up (XPS 400)

    Hello and congratulations in advance for anyone who can help me with this!

    Recently, my Dell XPS 400 crashed and would no longer boot (it worked, but it wouldn't boot because of damage to the discs dual-core).  I decided to buy a new HD to replace the old thinking that would solve my problem... not so much.  So here's what I've done and the question:

    (1) I took out a secondary drive, replaced by my OLD main drive

    (2) I installed the NEW drive into the slot where my OLD main drive used to reside

    (3) for the reset, I reached a display using the key CTRL-I command that told me that I now had a disc in which I could use to 'mirror' of the old drive, which is now bootable.  Of course, I followed the instructions to do this in order to get my computer started.

    (4) while the process worked, it seems that my NEW drive disappeared completely and I have not reached my goal to replace my old hard drive AND my computer, it starts now, always gives me error messages and does not occur at the height.

    Can someone help with this problem who is familiar with what I'm on everything?  I would be eternally grateful!

    Theoretically, I want to do is to completely replace the hard drive with my new drive, use the old BACKUP disk as the new secondary drive and plug the OLD external drive for me to remove files that I need them.  A small crease is that I do not have the Windows XP disks for the software that came with my old computer and I am unable to get them, however, I don't have the disks copied on a separate disk, which seemed to work for the resettlement, but I'm not sure of whether or not it would work on a hard drive completely blank.

    In any case, could someone provide any help would be greatly appreciated!

    Linux has to read your old files very well.  It is not the OS, you need to worry, but instead, the applications you want to use.  For example, you were using different Microsoft Office to create data files, you would find that in order to make the use of these old files, you need something that is compatible with Microsoft Office to read or modify.  Fortunately, there are applications that can do it.  Open Office is one of them, and I'm fairly certain that they have a version that runs on Linux.  The only thing you will not be able to do it is using Microsoft Office because it will not install on Linux.  You will encounter similar problems with each type of file that you created.  In most cases, you will be able to find compatible substitutes for original programs, but there are exceptions.

    EDIT: I have to say that I forgot to mention that I'm talking about Windows XP in the paragraphs above with regard to service packs.  If you use Vista or later, the Council does not apply.

    I have heard many good things about the different themes of Linux, but like anything else, I'm sure he has his own set of problems.  Most people seem to not run into them very often, and many just love it because it helps to avoid many problems presented by Windows.

    If you really want to go back to Windows, and people of Dell cannot accommodate you at a price you will find reasonable, you could try e - Bay or similar online store.  It is my understanding that a lot of people sell their old floppy disks to install OEM Dell through this kind of output.  You need an installation CD of Windows from Dell that incorporates at least Service Pack 2, and Service Pack 3 would be nice.  The old installation diskettes don't work well on many computers produced since 2005 because of the change of PCI - e for the video.  Older drives simply do not have the drivers for the PCI-e bus.  If your computer is old enough to use AGP or earlier, it is not so much a problem.

    The computer is always looking for your old disks because the BIOS setting told him to do.  When you delete a record permanently, you should return to the controller settings in the system setup (F2 during the automatic test after a start screen) and stop the ports having no disc attached.  This allows the BIOS to know to ignore these ports.

    EDIT: I have to say that I forgot to mention that I wrote about Windows XP in the present paper dealing with service packs.  Floppy disks to install Windows occurs more early than those with Service Pack 2 have no drivers for video PCI-e which is used on most computers since 2005.  You don't need to worry about this problem for Vista or later version.

  • Satellite L650 - 1 M 0 - cannot install the new display driver

    Hello!

    I have the Toshiba Satellite L650 - 1 M 0, and I can't install the new drivers for my graphics card: Mobility Radeon HD 5650 from the AMD website. Why can't I do it? I want to install the latest display drivers, because I have problems with the display mode. My laptop is set to 16:9, but some programs display in 4:3.

    Please give the latest drivers on the Toshiba site or tell me what can I do to download the drivers from the website of AMD. I have Windows 7 64 x;).

    > Why can't I do it?
    I m wondering really you ask something like that. It is well known that the support for mobile devices (laptops) is offered by laptop manufacturer and not by the hardware manufacturer.

    Because of the design of specific laptops with limited cooling performance graphics card can not be upgraded as on maps graphics designed for desktop computers. New driver means more performance. More performance means more heat and result can be damage of graphics card or switch-offs due to temperature-critical material.

  • Satellite A300-RJ1 - cannot install the new graphics driver from Intel page

    Hello.

    Another problem.
    When I use the "integrated" Vista, I can not install the new graphics driver (intel inside).
    Whenever the error message: the driver is not validated by your system, please contact your producer.

    So if I install a clean windows, so I can install the new graphics driver: S and I want to install because it is much more recently than the preinstalled :(

    Hi mate

    You can install this driver, but you need to use different installation procedure.
    You must install it in the Device Manager.

    Here, you can choose Advanced Setup, then choose don't search. I will choose the driver, then point to the driver files that you have stored on the HARD disk and complete the installation.

    But note; I read here that the use of non-Toshiba drivers is always at your own risk

  • Satellite L630-10R - cannot install the new display driver

    I wanted to update my display driver, so I removed the 'old', but now I can not install new, when I start the Ati catalyst Wizard there is no display driver must be installed, I can only install the new installation manager. In addition, my graphics card has been recognized as HD 5145 by windows and is now recognized as HD 4500 Series.

    How I can install the new drivers?

    Hey,.

    Why you wanted to update the display driver? Have you had any problems?

    Well, I also put t know why you are not able to install the display driver, but where did you downloaded the current version? Toshiba page or the ATI site?
    I recommend you to download the drivers of Toshiba page only because pilots are pre-tested by Toshiba.

    What operating system is installed?
    Usually, you can also install the drivers manually through the Device Manager. This is why open Device Manager, select the graphics card and choose update drivers. Then use advanced installation where you can choose the driver directory yourself.

  • Cannot install the new version of the browser of ACC...

    Anyone able to do install? Guard sent me errors

    There is a related post:

    http://forums.Adobe.com/message/3653241

    Basically if you have an older version of the browser (before May 2011) and try to upgrade to a newer version you must uninstall the old version and install the new version from scratch. The problem is related to a change in the required certificate to sign the application AIR (from Adobe) that has two incompatible versions.

    If you do not have the installed browser and/or have a version reasonably new post please the navigator version and possibly a screenshot of your error. "Gives Me the error" isn't really very useful

  • How to install the new BBM blackBerry smartphones

    I tried to find a way to install the new BBM 5.0, but can't seem to understand. I am new to the blackberry world (3 days) and I got an old 8703e that is now configured on my line of personal relationships.

    So I've updated the software (desktop and blackberry), but it said that my BBM is updated to 4.2.1

    I'm on the outskirts of Bell to the Canada and can't do no matter how hard I try. If I go on blackberry Appworld, it cannot be downloaded any other way except by browser, which I don't have, I have only the email and BBM on my Blackberry. Am I stuck without internet for browse and locate this program?

    To use install and use BlackBerry Messenger v.5:

    • A data plan from your wireless service provider
    • A smart phone BlackBerry with 64 MB of memory
    • 2.4 MB of memory available smartphone
    • BlackBerry® Device Software v4.5 or later version
  • Can not install the new update

    Hi, I use windows 8.1.

    My Skype cannot be used at present. Pop message 'the old Skype 7.8 version can not be delete' while I install the new version by the message on Skype application.

    I got through all the files and make sure you all relate file has been remove. But I can not install the new version. How can I update the window to desktop?

    Thank you

    Run the following program to remove traces of Skype from your system, which should allow you to reinstall the program:

    http://www.pcdust.com/downloads/SRT/SRT.exe

  • Problem after installing the new drive on Pavillion G6-2320

    The original hard drive on my old book of 8 Windows Pavillion G6-2320 3 months crashed and I sent to HP and got the replacement of the hard drive (laptop still under warranty). They gave me support online printing that I just need to install it in the laptop and would not need the disc to install the operating system. (I had originally bought my own replacement hard drive and had error messages so chatted with online support who took care of the hard drive replacement confirmed that indeed one supplied with the laptop has been damaged)

    After you install the new hard drive and turn on the laptop, the following message appears on the black screen:

    Not found boot device

    Please install an operating system on your hard drive

    Hard drive (3FO)

    The F2 System Diagnostics).

    I went to F2 and test the hard drive. Everything was made. Help please!

    Thank you

    Hello:

    You will need to call HP support and ordering of a set of recovery disc for your model in order to install the operating system and the programs provided with your laptop.

    HP is not delivered replacement hard drives pre-configured with any software.

    They should also ship you the free of charge from the PC recovery discs is still under warranty.

  • problem to install the new language of the interface

    When I try to install the new language pack of interface on my win xp SP3 this message, it is displayed:

    "The windows XP MUI version seems to have been installed on this system. Persian interface pack for Windows cannot be installed on this computer.

    What should I do to install?

    Hi amirtourehei,

    Basic language and edition required to install the Persian windows interface pack is English

    1. to install and use the Interface Persian Language Pack (LIP), you must add the Persian language support to the operating system, and then install the fonts. The following section describes the steps necessary to accomplish these tasks:

    a. open regional and Language Options of the Control Panel, then go to the languages tab.

    Note: If you are using the category view, click on Date, time, language and Regional Options, and then click regional and Language Options and then go to the language tab.

    b. Select the option install files for complex scripts and languages from right to left (which includes the Thai), then press the OK button.

    Note: Please have your Windows CD ready, because you may have to copy some files in your system

    2. always make sure that the underside of update is installed on your computer:http://www.microsoft.com/downloads/en/details.aspx?FamilyId=D3F8F6AB-84F1-4095-8709-DF509B1BEE22&displaylang=en

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How do we install the new update from Windows Update for Windows

    When I go to Windows update, with what he gets to do the updates that I need to install the new Windows Update for Windows Update. I click on install after a few minutes she returned with the same page but with a red shield on the left. Does anyone know what I can do to fix this problem. I was not able to do the updates for a few weeks now.

    Hello
    1. you receive an error message or error code when running Windows Update?
    2 have you made changes on the computer before this problem?

    Follow the methods below:

    Method 1:

    Follow the suggestion mentioned in the article:
     
    You cannot install some programs or updates
    http://support.Microsoft.com/kb/822798
     
    Method 2:

    Run an analysis of auditor of system files on your computer and check for the issue.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Method 3:

    Download preparation tool system update version of operating system and control accordingly.
    http://support.Microsoft.com/kb/947821
     
    Hope the above information is helpful.
  • I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and has already done.

    I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

    You cannot uninstall a running operating system.  The best you can do is wipe the hard drive and start over, but which will also remove all programs and documents.

    "malayboy" wrote in the new message: * e-mail address is removed from the privacy... *

    I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

Maybe you are looking for

  • removal of app Launchpad?

    Is it possible to get rid of apps in launchpad? There are two that I don't know how they got there that I don't want. I tried to move it to the trash, but it does not work.  El Capitan, 10.11.4 9.1 Safari OSX

  • Re: Impossible to reinstall driver bluetooth windows 7

    I have a new laptop Portege T210. Bluetooth was working and then stopped, saying: it is not activated while he was. I use the bluetooth in bed. I did a system restore and now when I turn on bluetooth, windows 7 Home Edition premium invites me to inst

  • Adjust contrast and color on Qosmio G30 - E10

    Hello is it possible to adjust the color and contrast of the screen TFT on my G30 - E10? Kind regards Uwe Meyer

  • my pc crashed and I had to get back to Service pack 1 of windows XP, how upgrading to SP2?

    the pc is a compaq presario, 2 ghz, 512 MB, I don't know the State of the art, but essential software applications! I think it was SP3 crashed my pc, because it updated early December 2011 and has never worked since I recovered using tool system reco

  • EA3500 Limited and unavailable 192.168.1.1

    We moved a week ago, and I'm trying to set up my system exactly as it was before. I have my router connected to a cable modem that we have, so the only thing that has changed is the address IP Comcast providing service to the House. I tried to use th