Adjust contrast and color on Qosmio G30 - E10

Similar Questions

• Qosmio G30 - E10: no reading DVD with "Toshiba HD DVD Player.

  Hi all

  If I try to play a normal DVD (not a HD-DVD) with the Toshiba HD-DVD player software, I get the message next to the HD-DVD player:

  "This player has no DVD Playbackfunction. Please try an appropriate for the DVD playback application.

  HD-DVD drive's current firmware. HD-DVD's on current patchlevel 4.20.16.
  DVD with InterVideo WinDVD playback works fine!

  Laptop is a Qosmio G30 - E10, with Vista Ultimate (factory standard).
  Any ideas?

  Thanks in advance.

  Sincerely
  Uwe

  Hello

  Did you ever ask yourself why Toshiba install two players on this laptop HD-DVD? Probably not.
  With short words: HD-DVD player is designed for playback of HD-DVD only movies. To watch regular DVD movies with a DVD player. For this application use WinDVD player.

  Goodbye and enjoy your great laptop Qosmio.

• Qosmio G30 - E10: display resolution changes from 1920 x 1200 to 1024 x 768

  Hello

  Display resolution of Qosmio G30 - E10 passes sometimes 1920 x 1200 (my default) to 1024 x 768 after returning from standby or Hibernation

  I run Vista Ultimate, most recent display of the download area of Toshiba driver.

  This happened at any time, but sometimes.

  Any solution to this situation of bases.

  Kind regards

  Uwe Meyer, Germany

  Hello

  It's really not easy to say why it happens. I think that it of difficult to reproduce this problem, because it happens that sometimes ;(
  You said you are using Vista Ultimate.
  Have you checked if this happens using the Vista OS since the Toshiba Recovery CD?

  It would be very interesting to know if this occurs on laptop with Toshiba to factory settings.

  I found a thread on a similar theme;
  Someone suggested to update the graphics driver.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22553&MessageID=82906

  Perhaps a graphic driver of the www.omegadrivers.net or www.laptopvideo2go.com might help.

• How to change the brightness, contrast, and color in the photo viewer in Windows 7?

  Change the brightness, contrast, and color in the photo viewer in win 7?

  How to change the brightness, contrast and color in the windows photo viewer 7 (I used the fix option in xp and vista)
  Thanks for any help.

  Hi epse30,

  In Windows Vista Windows Picture and Fax Viewer has been replaced by the Windows Photo Gallery and there was an option to set the brightness, contrast, etc by using the Fix as you said.

  Unfortunately, this option is not available with the Windows Photo Viewer in Windows 7.

  However, Windows Live Photo Gallery has a number of easy to use tools for things like red eye fixing or clearing exposure and low light situations. Windows Live Photo Gallery gives you more creative control over your photos. You can download Windows Live Photo Gallery for free from the link below;

  http://download.live.com/Photogallery

  Access the link below for more information about editing photos with Windows Live Photo Gallery

  http://Windows.Microsoft.com/en-us/Windows-Vista/editing-photos-with-Windows-Live-Photo-Gallery

  The above article is for Windows Vista, but it remains valid for Windows 7 as well.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Loss of contrast and color using watermarks

  Hi - I use Lightroom 4.3 to add a tattoo of copyright (png) image for existing tiff files for the use of the Web site. I have several different png files made using Photoshop Elements, with the text of copyright attached to different transparencies, for example 20/30/40 for 100-opacity, so that whoever I use in Lightroom I can always leave the opacity setting in the Watermark dialog box to 100% and images are resized proportionally to 35%.

  The problem is that whenever I export the files after setting the position of watermark etc, I noticed that there is a significant loss of contrast and color in the files tiff newly made, and I can't understand why this is, or any means to fix. Has anyone else had this problem and was able to remedy? Thank you.

  Lightroom 4.3, Windows 7, 64 - bit.

  Double-check all dialog export - exporting in Adobe RGB instead of ProPhoto or sRGB?

• Graphic problem and reset on Qosmio G30

  Hello

  My Qosmio G30 collapsed.

  It started with the screen do stripes of color everywhere, and it came and went over time.
  Sometimes the screeen had completely black, while the computer is still working proparly.
  I know then that in videomeeting I could still continue with the participants when the screen went black.
  The noise was still there.

  After that the graphics stoped to work anywhere and I thought I had some kind of virus. When testing for reset the computer with the reset product CD I can't finish rebooting. The computer formatted the hard drive, but no new operating system has been installed, so I'm in big trouble :(

  The GPU (what is it?  :() seems to have a link of the week in the G30 judging by other discussions in this forum.

  Anyone has an idea on how I could solve this problem?

  Best regards / Anders Molin

  Hello

  GPU means that the graphic processing unit-> it's just graphic chip card

  According to you the message chip the graphics card may be defective.
  If you are not able to restore the laptop using the Toshiba Recovery then CD I would recommend contact the ASP in your country for assistance.

  In the worst case (GPU is a shame), the motherboard should be replaced.

  Good luck

• Display and boot on Qosmio G30-117 problems

  Hello

  My Qosmio G30 (117) has problems to start. Basically the Qosmio title displays properly, but as soon as Windows XP appears, it is as a grid of white dots on the screen. He will then drain and take forever to get into windows. The grid of points remains all the time.

  My hypothesis is that sound my display driver, but get an update is a challenge. When I try to download from the page drivers it says that there is none. The search is based on the model of my PC, it should be no wizard

  I can't get into XP in safe mode.

  Real question is, is this my driver or is this a hardware problem?

  Thanks for your help,
  Peter

  Hi guy,

  that looks a little a hardware problem but before we get into it, you should download www.laptopvideo2go.com drivers (Please read the FAQS on this site!) and then, if the problem persists after installing new drivers, you must contact a local authorized toshiba service.

  I give you a link if you really want to contact an ASP (Authorized Service Partner):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck buddy and good weekend

• Need help with my Toshiba remote control and receiver for Qosmio G30 161

  Hi all

  I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

  I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

  Also to confirm that I'm under addition of Windows XP MCE.

  Anthony Worlock

  Hello

  This remote will work, if you use it without any special drivers and special software, only in the Media Center.

  But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

  Please try this tool and check if it works.

  By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

  Welcome them

• Who can copy and send me Qosmio G30 - 117 Recovery DVD

  I don't have a recovery DVD. My friend buy it for myself in England and bring it to me. Not found the recovery DVDs in the pack. I asked the seller, but they were not interested in my problem. I asked Toshiba service in Turkey, but they told me that they could not give or sell me a new recovery DVDs. I have the key to license windows xp mce. How can I solve this problem. Could someone send me a copy of the DVD of the G30 recovery?, could someone help me?

  Hello

  As far as I know the device must be supplied with recovery CD or DVD player and Qosmio recovery media. If you n t have these media, so you should contact Toshiba service in the country where you bought the laptop.
  Check this box:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

• Contrast and color change 10 seconds after the restart.

  Hi, I have a problem with my laptop Toshiba Satellite L300D, and every time that I reboot, and when restarting over my screen is all nice and dark and strong colors. After 10 seconds, he jumps and gets very bright.

  If it is too difficult to understand what is happening, that person has the same problem on different system model.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=191911

  I tried the FN keys do not help, it does not contrast of brightness.

  It's high-contrast / Bright and it kills my eyes. Thank you.

  Hello

  You can try the following:

  1. download and install a display driver of [European Toshiba driver Page | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] before installing, remove previous installed a
  2 update utlity vap (if you use xp, it is called common module, I guess)
  3 reinstall the operating system

• Windows Vista 64-bit and button Support - Qosmio G30?

  Windows Vista 64-bit and Support Button?

  Hello buddy

  What do you expect now after writing this fabulous issue?
  Don't you think that someone will take you seriously?

  Just a tip: If you want to ask something to let people know what model of laptop you have exactly. All laptops are not supported for 64 bit Vista operating system.

• Contrast and brightness adjustment

  I am pleased to be with you. I hope you can give me the help I'm looking for cold Chicago.

  I have an Aspire 5600U all-in-one computer running 64-bit Windows 8 and I would like to adjust contrast and brightness. I found the buttons on the side right that apparently allow me to do it, but I can't understand how to use them. There is no reference to them in the user manual. The screen is beautiful but too contrasty for photo work and I would like to temper a bit to more closely matching prints.

  Thank you. I ' lll discover your suggestions.

• Qosmio G30 - a new CD/DVD drive is not working properly

  Hiya all

  I hope someone can help me. I had to replace my TS-L802A drive by another of the same model, except that when I replaced the drive I have problems to boot the CD and the laptop (Qosmio G30) rejects saying CD error at startup.

  I managed to install the operating system from a flash drive and it works great except for the side of cd rom of things. I have the flash player so that the laptop to recognize it? If yes how can I do to do that. I think the chipset for the optical drive is set as slave or something and not master.

  Help, please!

  Hello

  The readers of CD/DVD slimline for laptops are controlled by the firmware.
  The firmware controls the master/slave/c-selc settings.

  You need a player that is compatible with Qosmio G30.
  Your drive you bought may be compatible with a laptop, but if the settings are not compatible with Qosmio G30/bios of the controller, then, you wouldn't be able to use it

  There are no jumpers or anything else that could be changed as mentioned that he controlled by software

• How to connect the external monitor for Qosmio G30 with a HDMI cable

  Hello

  I have G30 also I have Samsung 32 LCD screen LA32S8
  I have the HDMI cable. I'm trying to connect the Qosmio G30 with the LCD screen and watch nothing displayed.

  I would also like to ask;
  Can I use the LCD screen as a monitor for laptop or I plug it into the PC output?

  THX and I need this help.

  Hello

  1. attach a TV or monitor to the Qosmio G30 HDMI while both units are in a State "turned off the power.
  2. turn on the TV or monitor first and then the Qosmio G30.
  3 Qosmio G30 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV or monitor.

  Check it out

• Qosmio G30-163: HD-DVD player will not recognize the Matrix Trilogy

  It is the last issue. WinDVD HD crashes after playing the opening for Blood Diamond and The Island WB logo. I posted a message about it, but it disappeared.

  Anyone know when the last update is due? He has not been one since December 26.

  Thks

  This post initially you're talking about? :
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=95884#95884

  I have checked the European driver of Toshiba page and chose the Qosmio G30 PGQ31E series and found the update to the most recent Firmware for HD DVD-R + r DL DRIVE (SD-L902A) and for the readers of disc-DVD-HD TS - L802A.
  There are two different firmware updates.

  In addition, I would recommend looking for an update of the HD DVD player. It of necessary.

  Toshiab HD DVD player update was published on the Toshiab driver page. Update!