Install the order appropriate for the new tools

Similar Questions

• A popular problem; Failed to install the new creative tool of cloud

  Sorry to bore everyone to death with it but after manhandle my way through literally piles of bits of son, etc. off google, the end result is a lot of confusion.

  My situation: running win 7 64 bit (uptodate)

  I've been running the tools creative cloud for nearly a year, but this last development day, or maybe that's not the last, but the update in June... left me unable to install the new tool CC.

  When I run the Setup, it ends with the message, stupid and unnecessary:

  "We encountered the following problems:

  Office of creative cloud could not be installed.

  So far no tool failed to start, at least not the ones I use regularly (PS, LR, bridge, etc.)

  Then, I see some messages suggesting the "cleaner" and when I read the README with it, sounds really time consuming and a royal pain to follow the instructions... all the backup etc etc etc.

  I hope someone can put into a kind of overview of how to proceed here.  I've read a few reports of people succeed in getting after the problem... but not a discription of how they did it.

  I really don't want completely disturb my work and my time through plans heavy to see it did not work and no progress has been made.

  So if there is a set of measures to take that are likely to put an end to the success please someone have them.  I have not found a complete discription of how to proceed.

  Harry please follow the following steps to reinstall the creative cloud application.

  1. Rename the OOBE directory located in C:\Program Files (x 86) \Common Files\Adobe\OOBE to OOBE_OLD
  2. Reinstall the Application Adobe Creative https://creative.adobe.com/

• How do we install the new update from Windows Update for Windows

  When I go to Windows update, with what he gets to do the updates that I need to install the new Windows Update for Windows Update. I click on install after a few minutes she returned with the same page but with a red shield on the left. Does anyone know what I can do to fix this problem. I was not able to do the updates for a few weeks now.

  Hello
  1. you receive an error message or error code when running Windows Update?
  2 have you made changes on the computer before this problem?

  Follow the methods below:
  
  Method 1:
  
  Follow the suggestion mentioned in the article:
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
   
  Method 2:
  
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Method 3:
  
  Download preparation tool system update version of operating system and control accordingly.
  http://support.Microsoft.com/kb/947821
   
  Hope the above information is helpful.

• After installing the new version of flash player firefox only charge for most of the sites basic html

  After you install the new version of Adobe Flash Player yesterday, Firefox would not charge most of the sites except in basic html, as I understand is the right term for all the lists in the text, especially on the left side of the screen. They open in Google Chrome and IE. I tried to restore to two days ago, today I uninstalled Firefox and re-installed, I have tried several possible solutions in the support forums, but nothing has worked. I prefer Firefox but it will fall if I can't get this resolved quickly. Note: I only start from the principle that the new flash player was to blame as it happened immediately after. I don't really know yet what he does, it's just one of those things that appears and says he has to be upgraded to the latest version from time to time.

  The Flash player plugin allows certain types of media to be displayed in the web pages. Otherwise, you get an empty rectangle. Usually Flash would not hinder Firefox to load style sheets, images and other elements that add to the raw text of the page.

  You can try the reset function. It duplicates some data key of your active settings in a new file, bypassing some add-ons and custom settings. Your plugins (including Flash) will still be active, but may be disabled manually if you wish.

  More information in this article: Firefox Refresh - reset the settings and Add-ons. Please note that an old parameter file appears on your desktop. You might want to keep this around for awhile in case you need to save something from him

  Does make a difference?

• Installed the new hard drive and now can't activate Widnows 7 as it says not valid for clean installation

  This computer is having problems and we tried to upgrade to Windows 7 hard drive crashed.  We installed the new hard drive.  Now, we try to activate this copy but code comes up saying invalid for a clean install.  We need to have some new code or just get ours to work.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• PS The CS6 (2012) and the tube to move it to a new Mac. I did a search on the web, but the information was not conclusive. I have to disable my current Mac before installing the new Mac? I still have the CD to install it. Thanks in advance for any help.

  I have PS CS6 (2012) and the wand to move it to a new Mac. I did a search on the web, but the information was not conclusive. I have to disable my current Mac before installing the new Mac? I still have the CD to install it. Thanks in advance for any help.

  You can install and activate up to 2 Macs for your own use. That would leave you with a spare part if something were to happen with your old Mac.

  However if you are going to get rid of, see help > deactivate, then also check the option to remove the serial number power the computer off.

  Then go to your folder CS6 use the Uninstall.app to properly remove Photoshop. Do not drag the folder to the trash.

  You can install fresh on your new Mac from your drive, turn and look for the updates.

  As a note: do not move or copy your old installation of Photoshop to a new Mac.

• I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  Thanks, I have solved this problem, simply delete the old and manually I have brand new!

• How to stop the bridge.exe active as to install the new application for example. Flash CC?

  How to stop the bridge.exe active as to install the new application for example. Flash CC? Help, please?

  I can not install any new demand every time.

  Please see:

  http://helpx.Adobe.com/Creative-Suite/KB/error-installation-cannot-continue-bridge.html

  Kind regards

  Ashutosh

• had to install the new hard drive, windows key does not

  My hard drive died in my Inspiron 660. I ordered a new hard drive and a recovery Dell USB key. A recovery key for Windows 8 pro based on my recommended by Dell service tag. I installed the new drive and used the recovery key to install Windows 8 pro. I then used a third-party tool to get the product key from the BIOS. The product key does not work. I wonder if the product key on the BIOS isn't for Windows 8, Windows 8 pro. If so, the wrong recovery key recommended by Dell.

  What should I do to activate Windows successfully?

  Secondly, on my old drive hard, I had upgraded to Windows 10 while he was a free upgrade. How to bring back the free update?

  Windows 8, Windows 8.1 and Windows 10 TH1 and TH2 had problems installing specific edition. Your key can be a simple language edition or one with Bing edition and therefore rejected by the installation of the edition of bad media.

  Windows 10 TH2 and later all the windows 8.x and 7 OEM keys are treated as Windows 10 keys. Edition installation specific issues have been fixed with Windows 10 RS1. The file .iso Windows 10 RS1 image is covering several editions. It contains all OEM editions and will automatically collect a key Windows 8/8.1/10 UEFI BIOS OEM System Locked Preinstallation and automatically installs the correct edition of Windows 10:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

• G62 - 219CA: possibility to backup/clone recovery Partition just before installing the new SSD?

  I'm considering buying an SSD of 256 for my older G62 - 219 CA.

  I can sort of back up or clone JUST the recovery partition, so when I install the new SSD I can put back them there and have this convenience for later use?

  I can't close my b/c the entire hard drive SSD will be too small in relation to the original drive.

  Any ideas/suggestions would be greatly appreciated.

  ToddNS

  It is not really possible to save or to clone the recovery partition. Your best option is to create the support of HP recovery using the Recovery Manager or to order HP media to DVD - Windows 7 64B doublespeak (Office 2010) + Supp 1 Recovery Kit.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• How can I install the new updates___

  I have Vista 64-bit with Service Pack 2 is already installed, but am unable to install the new updates re: windows or office. One of the errors is '80070641'. I followed the instructions from Microsoft re: unable to install and read some of the forums found in the search engines which lead me to believe that my window Setup is corrupted or missing something. I went through this with HP as it was impossible to install updates also. I have a DVD of the operating system, but do not know how to use if appropriate. Give me options. If I need to recharge, can I just the installer? Should I save all my files first? Charleei

  Maybe this article will help you. Use the option "fix it for me":
  http://support.Microsoft.com/kb/971058

  t-4-2

• Problem after installing the new drive on Pavillion G6-2320

  The original hard drive on my old book of 8 Windows Pavillion G6-2320 3 months crashed and I sent to HP and got the replacement of the hard drive (laptop still under warranty). They gave me support online printing that I just need to install it in the laptop and would not need the disc to install the operating system. (I had originally bought my own replacement hard drive and had error messages so chatted with online support who took care of the hard drive replacement confirmed that indeed one supplied with the laptop has been damaged)

  After you install the new hard drive and turn on the laptop, the following message appears on the black screen:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  The F2 System Diagnostics).

  I went to F2 and test the hard drive. Everything was made. Help please!

  Thank you

  Hello:

  You will need to call HP support and ordering of a set of recovery disc for your model in order to install the operating system and the programs provided with your laptop.

  HP is not delivered replacement hard drives pre-configured with any software.

  They should also ship you the free of charge from the PC recovery discs is still under warranty.

• Install the new motherboard and now asked to reactivate.

  Pretty much my old motherboard died on me in order to get a new motherboard and ram set up, after a little got it works and things are fine, until I check the system information and he said 11 days til trial, please activate Vista. "I clicked on the link sense my product code is still there and he told me reintroduce.  I try and it still says invalid code.

  Before installing the new motherboard, it was a HP computer premade, I contacted them and was told that I had to talk to Microsoft.  Sense, I've been jumping through the same process for about an hour, I decided to check the forms come out and ask here for any help.  The softwar is OEM Microsoft Vista Prem Home with SP 2.

  Help, please?

  Real, that I decided to break it down and get 7 Finally in any case, thanks for all the help

• Installed the new HD - cannot set up (XPS 400)

  Hello and congratulations in advance for anyone who can help me with this!

  Recently, my Dell XPS 400 crashed and would no longer boot (it worked, but it wouldn't boot because of damage to the discs dual-core).  I decided to buy a new HD to replace the old thinking that would solve my problem... not so much.  So here's what I've done and the question:

  (1) I took out a secondary drive, replaced by my OLD main drive

  (2) I installed the NEW drive into the slot where my OLD main drive used to reside

  (3) for the reset, I reached a display using the key CTRL-I command that told me that I now had a disc in which I could use to 'mirror' of the old drive, which is now bootable.  Of course, I followed the instructions to do this in order to get my computer started.

  (4) while the process worked, it seems that my NEW drive disappeared completely and I have not reached my goal to replace my old hard drive AND my computer, it starts now, always gives me error messages and does not occur at the height.

  Can someone help with this problem who is familiar with what I'm on everything?  I would be eternally grateful!

  Theoretically, I want to do is to completely replace the hard drive with my new drive, use the old BACKUP disk as the new secondary drive and plug the OLD external drive for me to remove files that I need them.  A small crease is that I do not have the Windows XP disks for the software that came with my old computer and I am unable to get them, however, I don't have the disks copied on a separate disk, which seemed to work for the resettlement, but I'm not sure of whether or not it would work on a hard drive completely blank.

  In any case, could someone provide any help would be greatly appreciated!

  Linux has to read your old files very well.  It is not the OS, you need to worry, but instead, the applications you want to use.  For example, you were using different Microsoft Office to create data files, you would find that in order to make the use of these old files, you need something that is compatible with Microsoft Office to read or modify.  Fortunately, there are applications that can do it.  Open Office is one of them, and I'm fairly certain that they have a version that runs on Linux.  The only thing you will not be able to do it is using Microsoft Office because it will not install on Linux.  You will encounter similar problems with each type of file that you created.  In most cases, you will be able to find compatible substitutes for original programs, but there are exceptions.

  EDIT: I have to say that I forgot to mention that I'm talking about Windows XP in the paragraphs above with regard to service packs.  If you use Vista or later, the Council does not apply.

  I have heard many good things about the different themes of Linux, but like anything else, I'm sure he has his own set of problems.  Most people seem to not run into them very often, and many just love it because it helps to avoid many problems presented by Windows.

  If you really want to go back to Windows, and people of Dell cannot accommodate you at a price you will find reasonable, you could try e - Bay or similar online store.  It is my understanding that a lot of people sell their old floppy disks to install OEM Dell through this kind of output.  You need an installation CD of Windows from Dell that incorporates at least Service Pack 2, and Service Pack 3 would be nice.  The old installation diskettes don't work well on many computers produced since 2005 because of the change of PCI - e for the video.  Older drives simply do not have the drivers for the PCI-e bus.  If your computer is old enough to use AGP or earlier, it is not so much a problem.

  The computer is always looking for your old disks because the BIOS setting told him to do.  When you delete a record permanently, you should return to the controller settings in the system setup (F2 during the automatic test after a start screen) and stop the ports having no disc attached.  This allows the BIOS to know to ignore these ports.

  EDIT: I have to say that I forgot to mention that I wrote about Windows XP in the present paper dealing with service packs.  Floppy disks to install Windows occurs more early than those with Service Pack 2 have no drivers for video PCI-e which is used on most computers since 2005.  You don't need to worry about this problem for Vista or later version.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• my laptop was preloaded and hard drive crashed. Do I have to buy a new drive to install the new hard drive?

  My laptop that I bought in January this year has been preloaded with windows 7 starter. I don't have the installation disc. What I have to buy one in order to install the new hard disk

  Have you given up on trying to resolve why the computer won't start? You will need to provide more information about what happens when you try to start the computer. There are several reasons for which a computer does not start and a damaged operating system is only one. Please describe in detail what happens when you press the button.

  Remember that a computer bought in January 2011 is very likely still covered by the warranty.

  In the event of failure of the BSOD (Blue Screen of Death) system, if that's what you see, for most users there is sufficient time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  You can get the computer to boot by following the advice in the following link:
  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration