Install the raid controller during the installation of ESXi5

Similar Questions

• I just bought a Logitech Web c110 camera and every time I try to install the installer crashes. Also, I was making the blue screens with different messages on them.

  Original title: how to find missing or corrupt files on windows xp pro

  I just bought a webcam logitech c110 and whenever I try to install the installer breaks down and I was doing the blue screens with different messages on them... How to scan for missing or corrupted files?  My brother-in-law has built this computer for me and I did not all disks for windows xp pro. system that is on it

  Hello

  1. you receive an error message while trying to install the webcam? If so, then post back the exact error message.
  2 are you able to install any other software?

  Try to capture the error message on blue screen and after return the exact error message. This could help us help you better.

  Step 1: Try to install the webcam software in clean boot state and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Need to install drivers RAID S100 during the OS for PowerEdge R210 II

  I am able to download the installer.exe for the RAID, but what I really need, it's just the driver.  I need to put the driver on a USB drive for the files during the installation of my Win2008R2, not a .exe.  When I run the exe on another computer to try to get the output files, it tells me I need Win2008R2 to install the drivers.  My only other computer options are Windows 7 and 8, it is a single server.

  Where can I enter the drivers, not only the exe to install the drivers?

  You must choose the hard drive version, not the version of Package to update to Microsoft Windows ... run the EXE to extract the files before using it.

• Z820 - BIOS updated to v2.55 - cannot start or install the installation of Windows 7 (UEFI) disc

  Hello

  I have serious problems with the boot and install Windows 7 on my Z820.

  My problems started with Windows Boot Manager, throwing an error in the boot, saying that "the Windows Boot Configuration data file is missing required information". In the end, I decided to do a full clean reinstall of WIndows. However, I was unable to get Windows 7 installed. I was able to boot the disc at retail of Windows 7 64-bit UEFI mode, but he had problems with the installation. Each attempt ended with an error stating that 'Windows could not update the configuration to start the computer. Installation cannot continue. ».

  It was the BIOS v2.08. Intel 520 (240 GB) SSD as boot drive and 2 TB SATA HARD drive as data disc on the ports of controller LSI 2308 0 and 1 respectively. 2 DVD players on Intel AHCI ports.

  I decided to take a different path.

  I removed my data HDD and a DVD of the Z820 player. I put my SSD (which will become the startup disk) and a DVD player on both ports to AHCI.

  I've updated the Z820 BIOS with the latest version (v2.55, February 13, 2013), did a reset CMOS (machined cable disconnected) and reset the BIOS to factory default settings. Then, I put 'OptionROM mass storage' mode EFI and the storage on AHCI mode.

  Now, when I put in retail Windows 7 SP1 64-bit installation DVD and select the drive of DVD (UEFI) to start, I get just a flashing dash. I noticed also that some fans begin immediately turn faster.

  To summarize:

  I am unable to boot Windows 7 SP1 64 bit DVD installation detail at all and therefore impossible to install Windows 7.

  Configuration of the system (as in the last installation attempt):

  -Dual Xeon E5-2680

  -32 GB OF RAM DDR3-1600 PC3-12800

  -240 GB SSD IDE AHCI Intel oucederomsurlesecondport 520

  DVD player - Harbour AHCI

  -NVIDIA Quadro 4000

  -BIOS v2.55 (OptionROM in EFI, Secure Boot disabled mode mass storage)

  I'm getting desperate... ;-)

  Should I try reseating the RAM modules? Remove some RAM? Connect my monitor differently (currently DVI to VGA)? Replace the graphics card?

  Kind regards

  Dries

  In the safety device is the LSI controller set to device available and under device options is Donwload ROM option enabled.
  
  If they are both correct so I would say that your MB doesn't have, I got 3 failure already on my 6 systems! Not been more reliable work stations to this day.
  
  For intergatting search device & patches for WinToolKit, I can share my images because they contain information about the company & registered software.

• Error when trying to install the Installer Cleanup utility

  Get the following when you try to install the Windows Installer Cleanup utility:
  Script: C:\... \IXP000. TMP\StartMsi.vbs
  Error: Permission denied
  Code: 800A 0046

  Source: Microsoft VBScript runtime error

  Hello Stepheen Beslin,

  Try the following to see if it helps.

  To resolve this problem, you must install The Windows Installer Cleanup utility as administrator. To do this, right click on the Setup file (msicuu2.exe) and chooserun as administrator. If you are prompted for an administrator password or for confirmation, type your password, or clickcontinue.

  Please answer back with an update on your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "Download and install the installer itunes 64-bit instead!"

  Hello. try to download itunes... pop - up box "this itunes Installer is designed for 32-bit Windows version, please download and install the itunes 64-bit Installer instead"

  Please help me I don't know how to do the same thing

  Thank you

  Well you go back to the apple website and download/install the 64 bit version and not the 32-bit version (run first the DiskCleanup)

  http://support.Apple.com/kb/DL1047

• How to use or install the installer 64 bit on Windows 7?

  Try to install Microsoft Lync 2010 but when I select 'YES' to allow program to make changes to my computer, I get the following response: this Setup is not supported on your computer. Please use the 64-bit Installer to complete the installation of Microsoft Lync 2010.

  There are two installation for Lync programs, 32 and 64 bits, use the proper architecture of Windows 7, you are running. In this case, Windows 7 64 bit.

  Download and install this trial 64 bit version and use your activation key you have.

  http://www.Microsoft.com/download/en/details.aspx?ID=10400

• Upgrade Photoshop CS5 but re-installing the installation hangs

  After a restoration of the system, in an attempt to re - install my Photoshop CS5 on my Windows 7 PC, it remains at a standstill.  It reached a point where the "install now" does not move, but the "Total remaining time", continues to rise, have tried to get this installed for two days.  At one point 'Total remaining time' had reached more than 800 minutes with 5% full.  On this last attempt to install, he went up to 296 minutes with 15% full, and then kept fluctuating up to 280 minutes 14% then up to 305 minutes 15% complete.  At this time I just let it run.  Before he was at a standstill with the help of Adobe, now it's at a standstill on Adobe Air.

  I have restarted this facility several times, uninstalled and reinstalled my previous versions of Photoshop, and tried again.  Made sure all other programs/applications are closed and my internet connection was solid.  I don't know what to do or try next.  From now to 337 minutes still 15% Complete and always on Adobe Air.

  I gave it one more try and note here for others that may encounter the same problem, how I was finally able to install Adobe Photoshop CS 5.

  When you get to the screen to select what to install for Photoshop CS 5, if as in my case, you have the 64-bit, do verify THAT the 64-bit (if the 32-bit is checked to remove the check mark) and remove the check mark from Adobe Air.  This does the trick and will install properly.

  I noticed at the guarded facility is at a standstill has either using Adobe or part of Adobe Air installation.  I think that it is possible that because I already had the air latest Adobe on my computer (I have 5 other adobe products) that she, in other words, "caused an insurmountable difference of opinion between the installation and the computer".

  I do thank you very much for your time and try to help solve this problem.

• An installation package for the software aio 02 of the ps product cannot be found. How to find or install the installation package?

  Windows Vista Ultimate 32-bit

  Message appears at the beginning upward.

  Accompanied by msg: try installtion again using a valid copy of the installation package 'ps_aio_02_software.msi '.

  and: the component you are trying to use is on a network resource is unavailable.

  and: click OK to try again or enter a different path to the folder containing the installation package 'ps_aio_02_software.msi '.

  I don't know what function I am using.

  Unfortunately, I am not very computer.

  Any help would be appreciated!

  Thanks in advance

  Joe

  Hello

  It seems to be to do with the HP software.

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/PS-AIO-02-software-MSI-error-on-boot-up/TD-p/2218373

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/uninstalled-a-program-I-shouldn-t-have-Windows-Vista/TD-p/219859

  And this HP link explains different .msi errors:

  "" The component you are trying to use is on a disk that is not available"or a similar Message appears on the computer in Windows.

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01631295

  See you soon.

• Why when I install the installer says uninstall

  I just bought Photoshop elements after the free trial.  I was trying to download the program, I just paid for, when in the Setup it asks me uninstall Photoshop.  I uninstall the free trial version?

  I can't be sure since I don't not have/use items Phtotoshop, but normally when you have installed a trial version, you don't have to uninstall/reinstall anything for the purchase of follow-up.  You only need to activate the trial entirely under license by applying serial number you acquire with the purchase.

• Impossible to install the driver AMD lost correctly all the CCC and 3D options

  Hello world

  I have HP pavilion g6, win 7 64 bit. AMD Radeon HD card Intel HD graphics and 7400M.

  My problem started when my screen became black seconds much and when he comes back he said amd has stopped so I decided to update the driver.

  First, I downloaded the driver supported on the site

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98607-2&CC=emea_middle_east...

  but whenever I try to install the installation process very quickly the screen isn't even happen during the installtion and it says driver is installed successfully, although nothing has been installed and change anything absolutely.

  So I decided to download the latest driver from amd site14.4 amd. I had some problems during the installation, but it worked fine and I got all the options, including switchable graphics. But after awhile, the laptop began to hang at startup showed a blue screen saying that something was inconsistent.

  Then I tried to update the driver in Device Manager, and since then, I've lost all control catalyst also switchable graphics mode options and 3D in photoshop doesn't work anymore and whenever I close the catalyst a message come say it has stopped working. I tried several times to uninstall the driver and then install a new versin 14.9, the previous 14.4, support, but still nothing of them worked at all, also I tried to install with win 7 compatibility but it always gets stuck. Sorry for the elongation but I am so tired of this problem. I really appreciate any help.

  

  

  

  Hi @Black_violet ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question HP Pavilion g6-1045sx laptop and problems with the graphics software. Here are the drivers for your device. I uninstall both and restart the computer, and then reinstall only the AMD. It will include the Amd Graphics Driver and Catalyst Control Center of the computer restart.

  Intel will be installed automatically.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system.

  You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Please let me know how it goes.

  Thank you.

• Creative cloud Apps (Photoshop CC) 'The Installation failed' error Code 7

  Recently I've just upgraded to windows 7 10, and in the process, I uninstalled my Photoshop CS6. After the upgrade is finished, I headed to the adobe website to install Photoshop once more, soon for a new creative cloud service. I decided to try it with a trial for now, to see if I could buy later. I launched the installer of creative cloud, and once it was done, I clicked on the try button next to Photoshop, as well as other programs such as first and hearing that I used to have in the past. A few days in the new creative versions cloud was pretty cool, and I liked my fair use of it. Unfortunately a few days later I walked directly into a virus online and random programs began to install on my desktop. I panicked! I decided to do a restore of the system on my machine for a few days earlier, (unfortunately the timestamp was set before I installed all new adobe programs ) scanned for viruses and malware and cleaned my machine once more. After I did, I installed the installer of creative cloud again to see now that it was the fate by a few seconds in. I was confused, so I made online searches to quickly find this "creative cloud cleaning tool" provided by adobe. Gave him a quick run, cleaned up all the old files that remained, and installed right accelerated through good as new again. Shortly after I clicked the button 'Try' next to Photoshop, it went through the entire download process and then display in orange text, «Installation Failed - more». Only, this became more frustrated at the minute... I decided to try the same installation process on the first, and it's the same thing; «Failed to install - more». I decided to click on learn more to soon find text read, ' errors occurred during installation ' (7) I studied this Error Code 7and he said to try to install your applications through safe mode with network. STILL NO LUCK. I gave up at this point, and I can help the community! Thank you

  Images

  

  Plug

  Processor	Intel Core i5 - 3570 K CPU @ 3.40 GHz
  Video card	AMD Radeon 200 R9 series
  Memory	8. 0 GB
  Operating system	Microsoft Windows 10 (build 10586), 64 - bit

  UPDATE

  After a fast delivery on my windows (keeping all my files of course), photoshop and other programs from adobe installed without a scratch! Thanks John!

• How to install the spectral measures and Modulation for several versions of Labview Toolkits

  
  

  Hello dear,
  This is a known issue. You can read in the readme of the modulation toolkit:

  Two Versions of LabVIEW installed
  The installer supports the installation of the Modulation Toolkit into one
  version of LabVIEW; installation of the tool in several separate
  facilities (e.g. LabVIEW 7.0 and 7.1 installed LabVIEW LabVIEW
  on the same PC or in separate directories) is not supported or recommended.
  A way not supported to do but involves manually copying files from
  one LabVIEW installation to another. To do this, you can install the
  Modulation Toolkit to the base of a LabVIEW installation directory, and
  then manually copy the files installed in the other installation of LabVIEW.
  The following list includes files and relevant directories. Copy all the files
  These directories, including subdirectories, using the equivalent
  paths related to the House LabVIEW directory for the target.

  \vi.lib\AddOns\Modulation\*.*
  \vi.lib\AddOns\NISML\*.*
  \examples\Modulation\*.*
  \resource\objmgr\NIMTAttribs.RC
  \resource\objmgr\NIMTAttribs.RCH
  \help\lvmod.txt
  \help\lvmod.chm
  \help\lvdmt.txt
  \help\lvdmt.chm

  Note that this list does not include installed files. Also, copy
  the files in this way is not equivalent to a complete installation in the
  another version of LabVIEW. Especially own error text to the
  Modulation Toolkit will not be updated and the example Finder ads will be
  the examples of Modulation Toolkit.

  Jerome

  "CherieC" wrote in message news:
  [email protected]...
  > I installed NOR-RFSG, NOR-DAMA, the Spectral Measurements Toolkit, as well as the
  > Modulation Toolkit.  I have two LabVIEW 7.1 and 8.0 installed on my
  > system.  I developed an application in BT 8.0 and now I need to come back
  > to LV 7.1.  The problem I have is that the add-on toolkits appear to
  > only have been installed for LV 8.0 because there are several missing screws
  > and control when I try to open the LV 7.1 version.  I tried
  > re - install tool boxes, but this is not solved the problem.  How
  > can I get the installation program to install the toolboxes for two versions of
  > LabVIEW?
  >
  > Thanks for your help,.
  > Honey

• The installation program constantly suspended InstallDB

  Hey,.

  I tried to install Oracle 11g release 2 on my solaris 10 DB 64-bit sparcv9 kernel modules machine. But for some reason every time i try to install the installation processes starts hanging. It hangs after " INFO: restoration of class file:/home/oracle/database/install/... oracle.install.driver.oui.ShiphomeMetadata/internship/shiphomeproperties. XML". I cant for the life of me figure this out. Any help? This happens at the same location over and over again.


  Here's whats in the temp log file:

  INFO: - Job Distribution -

  INFO: Installation of Oracle database: 0,941

  INFO: Run Scripts to root for the installation of the Oracle database: 0.059

  INFO: ---------------------------------------

  INFO: From configure InstallDB

  INFO: Installation InstallDB initialization

  INFO: Information about the Session:

  ----------------------------------------------------------------------------------------------------

  VALUE OF THE PROPERTY

  ----------------------------------------------------------------------------------------------------

  [CLUSTER_NODES]

  Fake COLLECTOR_IGNORE_CONFIGURATION

  Fake COLLECTOR_IGNORE_FAILURES

  COLLECTOR_RESPONSE_FILE

  COMPONENT_LANGUAGES [en]

  True DECLINE_SECURITY_UPDATES

  FROM_LOCATION/home/oracle/database/install /... /stage/Products.Xml

  INSTALL_TYPE EA

  INVENTORY_LOCATION/ora01/app/oraInventory

  MYORACLESUPPORT_PASSWORD * protégés of value, is not to be connected *.

  MYORACLESUPPORT_USERNAME

  ORACLE_BASE/ora01/app/oracle

  ORACLE_HOME /ora01/app/oracle/product/11.2.0/db_1

  ORACLE_HOSTNAME "hostname".

  PROXY_HOST

  PROXY_PORT

  PROXY_PWD * protégés of value, is not to be connected *.

  PROXY_USER

  Fake SECURITY_UPDATES_VIA_MYORACLESUPPORT

  SELECTED_LANGUAGES [en]

  TOPLEVEL_COMPONENT [oracle.server, 11.2.0.1.0]

  UNIX_GROUP_NAME oinstall

  true b_rdbmsInstall

  fake oracle.install.db.isCCRAuthenticationUsed

  fake oracle_install_LaunchNetCA

  true oracle_install_NoMigration

  oracle_install_OCR_PartitionLocation

  oracle_install_OSDBA s/n

  Oper oracle_install_OSOPER

  fake oracle_install_RACInstall

  true oracle_install_RDBMSInstalling

  asmca oracle_install_crs_asmcaCmd

  oracle_install_crs_cluvfyCmd bin/cluvfy

  oracle_install_crs_crsDeinstCmd

  oracle_install_crs_crsInstCmd

  oracle_install_crs_crsUpgrdCmd

  oracle_install_crs_emcaCmd bin/emca

  oracle_install_crs_ipmiCACmd bin/ndfnceca

  oracle_install_crs_oifcfgCmd bin/oifcfg

  oracle_install_crs_rootBatCmd

  oracle_install_db_ASMSNMPUserPassword * protégés of value, is not to be connected *.

  oracle_install_db_AllocatedMemory 1024

  true oracle_install_db_AutoMemoryOption

  oracle_install_db_CharSetOption 3

  oracle_install_db_CharacterSet AL32UTF8

  oracle_install_db_ConfigTabSelected 0

  oracle_install_db_ConfigurationType software only

  oracle_install_db_CustomComponents {"oracle.server:11.2.0.1.0","oracle.sysman.ccr:10.2" "}

  . 7.0.0 ","oracle.xdk:11.2.0.1.0","oracle.rdbms.oci:1

  1.2.0.1.0 ","Oracle.Network:11.2.0.1.0","Oracle.netw

  ORK. Listener:11.2.0.1.0 "," Oracle.RDBMS:11.2.0.1.0","

  "oracle.options:11.2.0.1.0","oracle.rdbms.partition".

  ING:11.2.0.1.0 oracle.oraolap:11.2.0.1.0 ',' ',' oracle

  . RDBMS.DM:11.2.0.1.0 "," oracle.rdbms.dv:11.2.0.1.0","

  «orcle.rdbms.lbac:11.2.0.1.0 "," oracle.rdbms.rat:11. "»

  2.0.1.0"}

  fake oracle_install_db_CustomInstall

  oracle_install_db_DiskGroupName

  oracle_install_db_DiskGroupNameForASM

  oracle_install_db_EMCentralAgentSelected

  oracle_install_db_EMEmailAddress

  oracle_install_db_EMSMTPServer

  fake oracle_install_db_EnableAutoBackup

  oracle_install_db_GlobalDBName ORA11G.something.com

  oracle_install_db_InstallEdition EE

  oracle_install_db_InstallOption INSTALL_DB_SWONLY

  oracle_install_db_InstallOptionSelected 2

  oracle_install_db_InstallType EE

  fake oracle_install_db_LaunchDBCA

  fake oracle_install_db_LaunchODMA

  fake oracle_install_db_LoadExampleSchemas

  oracle_install_db_MountPointLocation/ora01/app/oracle/oradata

  fake oracle_install_db_QuickInstallOption

  fake oracle_install_db_ReceiveEmailNotification

  oracle_install_db_RecoveryBackUpLocation/ora01/app/oracle/flash_recovery_area

  oracle_install_db_RecoveryBackUpPassword

  * Protected value, is not to be connected *.

  oracle_install_db_RecoveryBackUpUsername

  oracle_install_db_SID	ORA11G
  oracle_install_db_SecureConfigDisabled	fake
  oracle_install_db_SetOracleBase	fake
  oracle_install_db_StarterDatabaseType	GENERAL_PURPOSE
  oracle_install_db_StorageType	1
  oracle_install_db_SuperAdminPasswords	* Protected value, is not to be connected *.

  oracle_install_db_SuperAdminSamePasswdForAll * protégés of value, is not to be connected *.

  oracle_install_db_SystemClass	DESKTOP_CLASS
  oracle_install_db_Type	1
  oracle_install_db_UseDBControl	true
  oracle_install_db_UseFileSystemForRecovery	true
  oracle_install_db_UseSamePassword	true
  oracle_install_db_dbcaCmd	bin/dbca
  oracle_install_db_dbuaCmd	bin/dbua
  oracle_install_db_isHAOrCRSConfigured	fake
  oracle_install_installerCmd	runInstaller
  oracle_install_netcaCmd	bin/netca
  oracle_install_netcaDeinstCmd	bin/netca_deinst.sh

  ----------------------------------------------------------------------------------------------------

  INFO: setting ORACLE_HOME_NAME is OraDb11g_home1. A default value was calculated according to the oraparam.ini

  NEWS: Reading metadata from shiphome of/home/oracle/database/install /... / training/shiphomeproperties. XML

  INFO: Loading file:/home/oracle/database/install/... beanstore/internship/shiphomeproperties. XML

  INFO: Translating the external format in raw format

  NEWS: Restoration of class file:/home/oracle/database/install/... oracle.install.driver.oui.ShiphomeMetadata shiphomepropertie/stage /.

  s.Xml

  Please check the requirements of pre - req documents "Setup Guide fast 11g Release 2 (11.2) of Oracle Solaris on x 86-64 (64-bit).

  http://docs.Oracle.com/CD/E11882_01/install.112/e24351/TOC.htm#CIHFICFD

  Thank you

  Amit

• Can not install the new version of FlashBuilder

  Install all the programs of the CS 6 on my mac successfully. I used to have the CS before 5. I deleted the CS 5 apps and Flash Builder 4.5 also.

  But he says he's still conflicts with another or a version installed the installer refuses to install FlashBuilder. But I deleted this version. So what is wrong?

  If you've deleted applications that is not the right way to remove them.  You must uninstall, not delete.  Uninstall what you have and then use the cleaning tool.  Then focus on the reinstallation of the software.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html