Install/uninstall the dell printer problem.

Similar Questions

• "couldn't find any computers configured on the network" on the use of the Dell printer.

  I have a dell v305 printer which worked fine, but now I get a message 'no computer configured on the network' how can I get this fixed? I use the same laptop I always used. If I set up my laptop again how?

  Hi Regina,.

  Please contact the Microsoft Community.

  You have a problem with the Dell printer. I'll help you solve the problem.

  Please see the troubleshooting in the article steps-

  http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-V305/manuals

  You can also run this fixit as well-

  http://support.Microsoft.com/mats/printing_problems/en-us?WA=wsignin1.0

  Please consult these articles for assistance more-

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-printer-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  We know if this helps solve your problem.

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• I have a printer a Dell V305 who, in a part of the computer, said his thereand it says in "all programs" the dell printer folder is empty, WHY?

  Do you guys do anything better? WHY have I not talking to you twice about my problem?  I HAVE A DELL V305 PRINTER. IN THE CONTROL PANEL, IT SAYS THAT I HAVE A PRINTER. IN THE "ALL PROGRAMS", HE SAID THAT HE DIDN'T THERE HAS NO PRINTER. WHY?

  Hello James,.

  It seems that you see the contradictory information on the question of whether or not the printer is installed.

  A few questions:

  1. What operating system is installed?
  2. Have you tried to install the driver for this printer?

  We will make an attempt the following:

  1. remove the printer from the PC.
  2 uninstall the printer from the PC driver.
  3 reinstall the printer driver.
  4 reinstall the printer.
   
   
   
  Best regards
  Matthew_Ha

• Citizen CT-S300 ticket installed with the latest printer driver, but do not print.

  Nice day

  New Dell with Windows 7 Home Premium workstation.  Installed in 4 other printers (this workstation is used in our shipping office) without any problem, they all work.  Installed the Citizen CT-S300 with the latest driver (64-bit) of citizen.  The printer has been successfully installed, but will not print anything.  I can see all the jobs in the queue, the printer is not out of line.  I uninstalled and reinstalled the printer several times.  Convenience store of Ran, no help.

  Really confused with this one.  This printer worked fine on another win 7 Pro workstation and laptop Win 7 Home Premium.  Cannot transfer the settings from the printer to my computer because Home Premium doesn't have the printer like Win 7 Pro Management snap-in.

  Any help would be greatly appreciated - thanks in advance for your time!

  -Rose

  RT

  Your best bet is to contact the citizen as they know that their best products.

• HP ENVY 7640: HP ENVY 7640 2 sides print and find the most printing problems

  Printer installed on 2 computers. To print 2 sides. No options settings except manually don't print on both sides. Can go to printer properties and choose 2 sides printer here, but not an option under settings. Shouldn't the option for 2 show print face upward under settings?

  Also when click on 'Find the print settings more' under the settings in the menu printing, an error message warning that "a serious problem occurred the last time that Word has attempted to recover the HPE04E66 print settings (7640 HP EVNY series). If click 'connect to the printer', Word crashes. (Happens on both computers). Is it possible to fix this?

  If the help Wizard does not update your printer, I would ignore the update or uninstall the program.

• The Dell printer cannot communicate with the Dell computer.

  It seems that suddenly my Dell AIO 942 printer cannot communicate with my Dell Studio 17computer.  These devices have been the transparent connection until two days ago.  I've set up a restore point, I installed the drivers, unplugged and re plugged 110 s and USBs, used different ports and I still have the same, printer cannot communicate with the State of the computer.   Copy and scan functions are good, Windows Vista operating systems.  How can I find these devices to their previous state of communication?

  Jesse,

  Thank you very much for the detailed information. It really give us a head start trying to solve the problem.

  Please answer these questions to get more clarity-

  (1) what are the other steps in troubleshooting tried by you so far?

  (2) other changes on the computer that I should know about?

  In the meantime, I have you refer to items offered on the Dell website - troubleshooting

  http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-942/research

  You can also have a look at the Microsoft article as well-

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Get back to us with the results.

• Dell printing problem

  When I'm working on a project in landscape format and I want to print on my excellent DellCN3110 laserprinter, he still regards as a format portrait, in any case I change my printer settings. I only have this with photoshop CS5 intel on my new Mac Pro 2010. My old Powermac G5 PPC has never had this problem. The only solution I have is to turn my page 90 ° before printing... what a certain bug in photoshop or in the Dell driver? Any suggestions? Thank you

  It is a known problem (Apple Apple) If you run on 10.6.5. A fix is on the way. More discussion is this thread.

• I bought a dell inspiron 1440 without any operating system. What should I install first, the dell drivers or windows vista?

  I use the windows vista installation disc supplied with my previous pc. I tried to do a clean install, inserted the disc into the cd/dvd drive. No installation window. The screen says "windows loading files..." After a few hours, the display shows something like

  "" windows has not... error: file boot32.exe is corrupt or not found. "."

  Then the Dell XP disc is great to use. However, do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with a third-party burning software (unless you have Windows 7, that allows to record the .isos natively) - as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  6. other hardware components are faulty.

  Then you unfortunately discovered why the phone was for sale.
  MS - MVP - Elephant Boy computers - don't panic!

• 7520e-all-in-one Photosmart market saturation of the color printing problems

  Photsmart 7520e-All-in-One Printer - have had several printing problems with tints very concentrated prints all pink or all blue or all green or gray.  Place in a new point of sale because I read that it might be a power issue.  This seemed to solve the problem.  The next morning to see the same problem... rising arrrrgh.  Spent by the doctor to print-scanning HP and do you feel test shows I have counterfeit cartridge-[test print shows all alphabet caps and tiny alphabet; color block and alignment are perfect] and please note I have all the authentic color HP cartridges.  Printed quality report and it came out perfect 3 times. Printer a fourth and he came out with lines horizontal ghost on all color blocks.  Again to print and it was perfect.  Print report situation printer and not rated for conflicts.  Is it a power problem, Windows 7 problem - please help.

  Welcome to the community, @ausiluver

  Thanks for a great post to start with!

  Personally, I would say that the problem you describe sounds like a printhead problem and perhaps a cartridge problem, which should dissipate if you try another cartridge. My best advice would be to check the steps in the guide below, make sure that you have tried all the. Some steps may look familiar to you already did some work on this issue.

  If the problem arises again, however, after these steps, troubleshooting, I would recommend contacting HP directly, to see if they have a replacement option for you or for a trade in option.

  The problems of print quality for the e-all-in-one printer series HP Photosmart 7520

  Details of HP:
  If you call in North America, the number is 1-800-474-6836 and if you call outside the United States / Canada: click here.

  Best wishes

• Charged computer hard drive Gateway laptop with Windows 7 and installed in the Dell computer. Now it says Windows is a counterfeit

  my gateway labtop has been damaged so I removed the hard drive and installed in my dell requires a hard drive.  It worked great for about a month and now it tells me that I have a copy of windows conterifet.  When I bought the two all have windows 7 on them what make?  I can't afford to buy and I have not to?

  When you buy a computer with a copy preinstalled Windows 7, it's the OEM version is good ONLY for the system with the original motherboard.  If you remove the hard drive and move to another computer, Windows 7 license is not good and cannot be enabled.  Please don't shoot the Messenger!  :-)

  Good luck.

• uninstall the wireless printer. Try to install using connection USB installed on a network.

  Try to install HP Officejet 6500 wireless by using the USB connection. Installed on a network.  How do I uninstall and let Windows identify as new material on a USB connection?

  Turn off the broadcast of your wireless router signal. Shut down the PC. Menu using the printer configuration to remove or change the SSID. Then turn the printer off and connect it to a USB port (this implies that all the necessary software has been installed). Now turn on the computer and turn on the printer. Once the printer has been detected the turn on your router.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• "Printer cannot be installed because the Windows Print Spooler Service is not running"

  For my new Dell V313w printer installation CD will not run.  I have a laptop Dell Inspiron E1705 with XP SP 3.  I have disabled the firewall temporarialy.  I use AVG 9 free antivirus.  By the fast installation in place, I have not attached the printer to my laptop or plugged.

  Lexmark printer drivers change structure dependence, so if you uninstall one, you have to fix things.

  Read this page and take particular note of the paragraph that begins,'If you have a Lexmark printer, these additional steps may be necessary... ". "

  I suspect that after you do all the steps, including the dependence of the spooler setting, you should be able to go to the control panel > add or remove programs and uninstall all remaining Lexmark software.

  Once you do all this, restart the computer before you try to install your new printer.

• Impossible to uninstall the previous printer program, receive "Fatal error during installation". How to uninstall?

  To change printers but can't get rid of the old program listed in programs & features. Any thoughts?

  Hello

  ·        You did changes to the computer before the show?

  ·        What is the number and model of the printer you want to remove?

  ·        You receive an error with the error code?

  I suggest you follow the link and check if it solves the problem:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Reference: you receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package

  http://support.Microsoft.com/kb/834484

• Windows family vfista premium is broken, but not the dell printer. products do not work for three months windows

  I have installed windows securitity, now three months of windows products don't work, it's time I'm asking for help, I lost the mail, internet, do not download, made-it is not working it's time I am asking for help, I lost the mail, internet, do not download, made-it doesn't work nor does she Live Gallery windows, it will not udate. the entire system is ruined, had to use incredimale and foxfire, re-installed Pack2, now it of really a mess, had too use sysytem restore dell, now say that dell drive hard has problems, spending 6 weeks with lasy tech, lost everything, so now what?

  proven system repair, nothing, tried to reinstall, he left 90 percent of the old stuff still there, I can't get downloads, patches, nothing that is microsoft works.

  I have to clean the machine and get 7, will operate 7 or have the same problems? I was usig stinger, ad-aware and spybot just to clean the machince, and I always get more trogens then Troy! husband uses a gateway on the same router, never spent a McAffee and a has no problem, every day it's something new, when it downloads, it said: it is the missing pieces and will not work.

  This is the third time I have tried to save my stuff to say-connected usb, hard drives, seven is better, the disk of vista that I messed up? It worked fine until I used the basics of microsoft.

  Thanks, I'll check some of your links, I was up all night with Dell, they did all the tests imaginable and agreed it was the vista software and not a virus or malware, they also checked with their people for the compatibility problems with windos 7, since this is the third time I would be re - install it and I went to buy windows 7 , he already has accompanied me throughout the entire upward and the account if I need help or advice, he will be free.

  So tonight I'm going only to remove my sweet that I bought or have the disc, then personal stuff like photos etc and I will do a clean install. I also had a new manual of windows 7 from microsoft for reference, thanks for the time, effort and helps you offered, some of these links might help me as I install it.

  Once again thnak you.

  Which