Install Windows 7 on a mod of Pavilion. a1620y CTO

Similar Questions

• Can I install Windows 7 64 bit on HP Pavilion Media Center m7540.dk PC operating system?

  Can I install Windows 7 64 bit on HP Pavilion Media Center m7540.dk PC operating system?

  This model:

  http://h10025.www1.HP.com/ewfrf/wc/product?CC=DK&LC=da&DLC=da&product=3225626

  TIA.

  Best regards

  Henrik

  Hi, Henrik:

  Specifications of your PC seem to meet all of the hardware requirements to be able to fully run W7.

  P D 915 processor is capable of 64-bit.

  ( (4M-Cache-2_80-GHz-800-MHz-FSB http://ark.intel.com/products/27515/Intel-Pentium-D-Processor-915-)

  I recommend you max on your memory to 4 GB as a 64-bit operating system requires more memory to run a 32 bit OS.

  A 32 bit OS will perform better on a PC that is running less than 4 GB of memory, unless you need a 64-bit system to run 64-bit programs.

  I would also start the W7 Upgrade Advisor to confirm what I posted.

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Best regards

  Paul

• Install Windows Pro 64 bit on HP Pavilion 8.1 X 2 10-j033au

  Hello

  I need to know if this able to charge Tablet install Windows 8.1 Pro 64 bit?

  Currently, it is pre-installed with Windows 8.1with Bing 32bits.

  I wasn't able to boot from USB for it. The USB key, I had can start on any PC or laptop. With the exception of this particular Tablet.

  I hope that this tablet is not related to this OS only.

  Any help will be appreciated.

  Thank you.

  I checked the support drivers for this product and seems that only Windows 8.1 and recovery disc 32-bit drivers are available. 64-bit is not supported on this unit.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-10-K000-X2-detachable-PC/7439381/model/7468031#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Pavilion model 11-n001sa: installing Windows HP pro on the HP Pavilion model No. 11 - n001sa

  I replaced the original hard disk, it was windows 10 installed.

  This small laptop is idea for my Renault Clip software, so we need to install Windows XP pro.

  I tried different setting in the bios, XP is listed, theres so no reason for it not install it!

  Using windows XP pro sp 2 & 3 installation disc, but keep the blue screen dreaded towards the end of the installation.

  Come on HP, I need your advice please.

  Hello:

  There is a very good reason that XP does not install.

  Intel did not provide any sata ahci drivers for the chipset that has your laptop.

  That's why you got the BSOD.  XP cannot find the hard drive.

  The latest processors from Intel-based notebook chipsets which had support for XP have laptops with the 7 Series chipsets.

  Not to mention the fact that you wouldn't find any graphic or wireless drivers for XP even if you can get it (that you can't) install.

• install windows 8 on computer hp laptop pavilion 14 ts

  Hello

  When I want to install windows 8 on my computer, the windows process goes up to the section to choose the disk to install windows on. the message says: , we have found all the disks. For a storage driver, click on load a driver.

  What should I do? Please help me...

  When you request support, please provide the full model name and product number (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• If I install Windows 7 64 bit on the Pavilion DV6-1334us, who had 32-bit?

  I need to recover my Windows 7 32bits Pavilion DV6-1334us.  The recovery partition is not an option, so I need to get the HP Web site recovery disks.  HP support site does not recovery disc for Wiondows 7 32-bit OS on this laptop.  They offer the recovery discs for the 64-bit Windows 7.  I understand that these books came in 32 and 64 bit OS, so I need to know if I can use the OS 64-bit on this material?

  edouble71 wrote:

  ..... HP support site does not recovery disc for Wiondows 7 32-bit OS on this laptop.  They offer the recovery discs for the 64-bit Windows 7.  I understand that these books came in 32 and 64 bit OS, so I need to know if I can use the OS 64-bit on this material?

  Hello

  Support page shows both, that means very safe to run Windows 7 64-bit on your computer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4072704

  Kind regards.

• When I install Windows xp in a pc laptop hp pavilion 2018tx g4, see the error 0X0000007B? How to fix?

  Hello Sir,

  When I install Windows xp in laptop laptop hp pavilion g4-2018tx, an error show me 0X0000007B.then I am looking for the solution of the internet, someone tell me to try next step-go to the BIOS and disk configuration sata hard then go but unfortunately in my computer, there is no disk sata hard option.i want to install window xp.plz me not to say the procedure how to install Windows xp in laptop.

  Hello

  0x0000007b error code, could mean an inaccessible boot device or a host of other reasons why this error. In the interest of all the possibilities, see the link below for troubleshooting tips.

  http://support.Microsoft.com/kb/324103

  Good luck.

• After installing windows XP Pro my computer does not start correctly

  After you have installed Windows XP Pro on my HP Pavilion (updated to XP home), my computer will not end the restart process.  I have repeatedly in a loop once the blue screen with the HP logo.  When this has happened before after installing a pack of updates for XP Home, we just started in safe mode and then had it will restart at an earlier time, thus eliminating the updates.  However, now when I try to start in safe mode, I get an error message that says: "Windows Setup cannot start in safe mode" and I leave safe mode.  We hoped that by installing Windows XP Pro, this problem should go away.  Can anyone help?  I have read several other entries in the forum for similar problems, but they all have to do with updates.  This is the first time I was not able to use safe mode, so now I'm stuck.  I hope that I can avoid having to perform a full system recovery, since it is a long involved process and having once before, I always felt the same restart problems after installing updates.

  PA bear,

  Thank you for help... After reading several posts in the forum, one of them reminded people to check with the manufacturer of the computer so that possible solutions... and this is the solution here, I wish I thought of him earlier... I did a system recovery to remove the Windows HP Pro and return to the original version of the default value.  Then I went to the HP site and downloaded the patch according to their directions.  Problems fixed! :-)

  Any PERSON HAVING HARD REBOOT YOUR HP PAVILION (with an AMD processor) after you install Windows XP service pack 2 or 3 updates:

  HP has a patch that solved all my problems.  Clearly, service packs contain information for Intel processors that is in conflict with AMD processors in many HP Pavilion desktop computers.  You can go to their customer service solutions website and download the patch.  Since I did it, I had no other problems. I wish just that I had discovered the solution until I had to do a full system recovery.

  If your computer hangs on reboot 'loop', see if this info. HP will help you:

  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  If you have had problems with XP updates, including service pack 2 or 3, try this page:

  Before you install Windows XP service pack 3

  Please pass on to other similar issues.

• Portege M400 - cannot install Windows XP on the new HARD drive

  Hello here is my problem,

  I bought an older Portegre M400 E, without a HARD drive. So I buy a new Samsung 400 GB. I looked in the Bios (ACPI BIOS Version 3.40) and it is ok. He shows me the HARD drive with built in Assign LD - 0 status ONLINE, 400 GB size so it seems to be nice. Changed the matrix Raid, described in the manual, in condition to create 1Raid-0
  So, I want to boot from the Windows XP CD, not recovering my own.

  Windows open to the top and after a short period, the installation ends with the message that it is not any HARD drive. This I try sometimes :-( Hope someone can help me.
  Do not forget that I didn't have any HARD disk with the dates of the laptop.

  Thank you Carsten
  (Sorry my English is not so good Im from the Germany)

  Wilkommen!

  > Changed the matrix Raid, described in the manual, in condition to create 1Raid-0

  I don't know much about your model, but I think that something wrong with the raid in the Bios settings. What other options are available in the Bios for the State of the hard drive? I found the RAID driver on the Toshiba driver page. It is possible, that you can integrate in with a program called nlite Windows installation disc or install Windows as in compatibility mode, and install the Raid driver. then

• Program Compatibility Assistant popping up on each connection after installing windows 8

  install windows 8 on my laptop (HP Pavilion Notebook PC g6) but keep getting a popup saying I need to install the ATI Catalyst Control Center, I do a search and it says to contact ATI, but solutions at home? any suggestions?

  Hello

  Contacting ATI (AMD) would not help because you need a stamp certified HP to be able to run on your computer. My suggestion: check out the complete model (G6 is not a model) of your machine and go to the (x) HP to check. Many drivers have been downloaded in support of the sites for these days.

  I hope this helps.

• ACHI need driver to install windows XP on 8560p

  Hello

  Can someone please me with the right drivers to install windows XP in AHCI Mode?

  I've been busy for 2 days to try al the drivers that I can find, but none of them worked. They always end up in a blue screen.

  HP Elitebook 8560p

  Productnr: LG732ET #ABH

  According to cpu - z, the chipset is Intel's QM67.

  Thanks in advance

  Hello:

  The book tells you to install the Intel(r) ICH9M-E/M SATA AHCI Controller.

  Normally, the best thing to do before installing XP, is for looking at your AHCI controller in Windows 7 to see what name it is. Then you can easily get the good ACHI driver for it.

  So, if you still have your OS installed W7, or can pick it up and do the above, you can download the latest intel ACHI driver and choose the one you need.

  Download the latest drivers from Intel's CCIS on the site below:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19599&ProdId=3172&lang=eng&OSVersion=Windows%20XP * & DownloadType = drivers

  Another method of installing XP, would be to go into the BIOS of your laptop and, normally, in the device settings menu, change your SATA Native Mode or in disabled SATA or IDE emulation Mode. I can't find any info on the menus of setting BIOS 8560 except some information very general.

  Then you should be able to load XP and install the SATA ACHI drivers afterwards.

  You can read how to install later by reading this guide. Use the Intel download above, however.

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c02551975/c02551975.PDF

  Paul

• HP Pavilion DV6 3122TX recovery deleted partition, need to install windows

  Hello
   
  I have a Pavilion DV6 3122TX laptop. System would block extensively when I ever access any file, was not a virus or whatever it is, I discovered it was the HD due to the error at startup screen "error of hard disk, hard drive 1 (3F1)", I ran all the auto controls and diagnostics but nothing improved. So I formatted the disc completely deleted all partitions even recoveries and other (my bad).

  My recovery disc can not be read by the laptop DVDRom Red flashes for a few seconds and then nothing happens, "said no system disk. Replace the disk and then pres any key blah blah blah... "The drive is fine I checked. I changed the boot options to boot from a CD/DVD internal.

  I need as soon as possible a working windows as a temporary solution. I can't install Windows 7, it seems because of some lock (turns on it was unable to detect the HARD drive). Windows XP cannot see the player because of the requirement of AHCI driver (cannot switch back to IDE) due to the lock of the BIOS. Then I tried the method of slipstream AHCI driver, now, here's my problem I just can't find the AHCI drivers for my laptop since I can not connect to Win to check with CPUz. Can someone direct me to text-mode drivers for this laptop at the wake in winxp x 86 using NliteOS. I'll take the laptop to be fixed at a service center next month, but now I need a solution. Even if you can fix my recovery solution, it would be great.

  I can access the hard disk using Linux. So the HARD drive is ok, please do not refer me to change the HARD drive that is not an option right now. (HARD drive was the problem)

  Sorry for this long post
  Thanks in advance...

  Hello

  Hard drive error, hard drive 1 (3F1) is the disk failure hard try loading in the Bios pass Diagnostics, perform the test, if it fails, you will need to replace the drive. In case your hard drive is not detected in the Bios, you must reinstall the part of the rear panel.

• Pavilion dv6645us after you have installed Windows 7 ultimate x 64 no drivers for base system device

  After you have installed windows 7 ultimate on my pavilion dv6645us laptop, I can't find drivers for base system device, location: 2 PCI Bus, device 5, function 2. Also for another device of the Base system, location: 2 PCI Bus, device 5, function 3, I can't find the drivers. And I have a unknown device, location: on the system as 'good' to ACPI Microsoft. (I don't know the English translation).

  The only thing that does not work on my laptop, I noticed is that I can't write data to my external hard drive (WD essential 1 TB NTFS), I can access the drive and get the data off of it, but when I try to put my computer on the outside driving my laptop goes down (it reacts with difficulty (, all usb devices are disconnected and I have to manually restart the computer by holding down the button for 5 seconds).

  Is this a known problem and the most important is there a solution for this?

  Thanks in advance.

  Hello

  Base system device is for sure your player card.

  Use your Vista drivers for this problem:

  Ricoh 5-in-1 card reader here

  If there are problems with the excavation using compability mode. How al information here.

  How to solve other problems as unknown device?

  Go to control panel-> Device Manager control

  Click with the right button of your mouse on each yellow Panel and choose Properties. Then click on background details and paste hardware ID here. This way we will know what it is.

  Below, an example of how you do it:

  

  

  

• his quick launch button does not work when I installed windows 8 in my computer hp laptop pavilion dv3z

  1. number and product name
  laptop HP pavilion dv3z

  2 operating system installed (if applicable)
  Windows 8

  3. All changes to your system until the problem occurred
  installed windows 8

  When I installed windows 8 in my pc laptop hp pavilion dv3z, the quick launch of the volume button is always red and the sound is mute... the driver for quick launch buttons and pilot for the sound is also up-to-date... can you help me please?

  When installing the audio driver, it installed following the instructions or mode of compatibility as shown here?

  Based on the software and drivers page for this device, the device was not tested and certified for Windows 8.  This means that some features may not be the same as the device was not designed for Windows 8.  See this site for more information and to find out if it has been tested for Windows 8.

  If the audio driver has not been installed in compatibility mode, I recommend using the 64-bit Windows 7 found here driver and using the related steps above to install in compatibility mode.

  Let me know what happens.

• Recently installed Windows 7 on Pavilion dv6748us - internal microphone does not work

  I searched on the web, without success, to find how to solve this problem.

  I recently installed Windows 7, 32 bit, on laptop HP Pavilion dv6748us to my wife. Now its internal microphone does not work.

  Have got some advice "roadside" use a Windows Vista driver; Have no idea what is the driver or how to get it.

  Have found information about uninstalling driver realtek audio and reinstall an earlier version; Have no idea about it no more.

  Would appreciate an answer with a positive result.

  Thanks for any help.

  Hello:

  Looking at your system information, you may have one of two possible audio cards:

  Conexant HD audio or the RealTek HD Audio

  The fact that you could not install the RealTek HD audio driver tells me that you don't have a sound card RealTek. Check your device manager and look at your sound card and check what sound card you have.

  Here are the Vista 32 bit driver for the Conexant sound card:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3632100&prodNameId=3648286&swEnvOID=2093&swLang=13&mode=2&taskId=135&swItem=ob-63949-1

  Here are the Vista 32 bit driver for the Realtek sound card:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3632100&prodNameId=3648286&swEnvOID=2093&swLang=13&mode=2&taskId=135&swItem=ob-59516-1

  If you have the Realtek audio card, I would download and install the driver of more recent, HD directly from RealTek site:

  Accept the agreement, download and install one on the list. Maybe it has been updated to solve the problem you are experiencing.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Paul