Install windows 7 on your laptop BACK

Similar Questions

• Error System Recovery Options while trying to install Windows 7 on your laptop white (without os)

  I bought a Toshiba laptop satellite c55-c-174 with no OS on it. Downloaded Windows 7 from msdnaa and bootable usb drive created with PowerISO. Had a lot of trouble with the usb as a boot recognition, but then I changed the boot order to usb is just after the drive hard (i.e. second). Also in the configuration system changed boot at CSM Boot Mode. And it's system BIOS version 5.10.

  Finally, he started installation, but found no drivers. So I tried Startup Repair option. Didn't fix it, just at the point where I tried to access the repair your computer option again it says error System Recovery Options: this version of system recovery options is not compatible with the version of windows that you want to repair. Try to use a recovery disc that is compatible with this version of windows.

  Someone has the power to deal with this?

  Thanks in advance.

  ISO power not recommended to bootable media.  The prompt for drivers almost always means that the media is bad, because all modern SATA drivers are in the installation media.

  I create flash support using Rufus for UEFI/GPT, then start using only the Key of the BIOS Boot Menu.  Choose the UEFI version to the flash stick, then custom Setup, remove all partitions until the space unallocated click beside the AutoShape and start.

  If you have changed all the UEFI BIOS configuration settings, set them in the UEFI firstly, turn off Secure Boot, CSM disabled, Windows Boot Manager set first to start.  If, in case of doubt poster of photos of back and we will help you sort the parameters correctly.  It would be good also update the UEFI firmware like this can matter.

  All this is covered and much more still to ensure a perfect clean reinstall Windows 7

  For all other problems see resolve the failures of Installation Windows 7

• Cannot install windows 10 on my laptop because of Windows Family Safety Filter.

  I can't install windows 10 on my laptop because of Windows Family Safety Filter.  I tried to uninstall this app but still no luck.

  Original title: upgrade Windows 10

  Try to upgrade manually:

  If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Does anyone has installed Windows 7 on a laptop Pavilion DV2175

  If anyone has installed Windows 7 on a laptop Pavilion DV2175 and if so it is 32 or 64 bit

  Hello:

  There is an unofficial update guide to windows 7 for the series dv2000.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-7-upgrade-guide-for-DV2000-models/m-p/186936#M28141

  Given that the maximum amount of memory, that you can install on your laptop is only 2 GB, I'd go with W7 32 bit, as a 64 bit OS requires more memory and disk space to run a 32 bit OS only.

  Not double, but more.

• I want to re - install windows xp on my laptop but I don't have the resource cd. I don't have the product key. What can I do?

  Please

  I want to re - install windows xp on my laptop but I don't have the resource cd. only I have the key to product label I can do?

  also my frist question is that if I install this version (xp sp3) with my product key, it will be legal?

  The downloaded file CANNOT BE USED TO INSTALL WINDOWS.

  It is not a question of legal or non-legal.  The file you download is not complete.  The downloaded file will update an existing installation of Windows XP Service Pack 1 or Windows XP Service Pack 2 for Windows XP Service Pack 3.

  Right click on my computer, then select Properties.  The screen say for your version of Windows, including Service Pack?

  Re-installation of Windows may or may not be the right solution for your problems.  If you want to re - install Windows, read this article on the Toshiba site--> http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/outFrm.jsp?ofId=AskIris&searchString=restore+windows+xp&x=7&y=9 in particular the section titled "using the recovery partition Toshiba HDD recovery utility '

• I have re-installed Windows Vista on my laptop (Dell Inspiron 1525) and now my wireless does not work.

  Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .

  original title: Wireless problems after install.

  I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help

  Question...  You have whatever it is listed in the "Network adapters" section of "Device Manager" now?

  While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.

  You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included.  This could be a hardware problem PURE.

• I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

  I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• Clean install windows 7 on my laptop EasyNote LM85 error "starting windows."

  Original title: installation of windows 7.

  I try to clean install windows 7 on my laptop than easynote LM85 DVD or USB, but it won't go beyond the screen when he say "s windows startup".

  After that appears a few seconds later, my computer restarts automatically and start again, I cannot access the menu facility

  help please I have had this problem for weeks the only OS it install me is winxp pro

  Hi Aurélien,.

  Thanks for the reply.

  Did you run the assistance of upgrade of Windows 8 on your computer?

  Upgrade Wizard: FAQ

  http://Windows.Microsoft.com/en-us/Windows-8/Upgrade-Assistant-download-online-FAQ

  Let us know the result of the upgrade wizard.

• I installed windows 7 on my laptop, I lost my product key, I want to see my product key in the system although kindly help me on this.

  I installed windows 7 on my laptop, I lost my product key, I want to see my product key in the system although kindly help me on this.

  because of your offensive and derogatory terms in another post I'll do indicate to search for a program of keyfinder. F bombs are not allowed here.

• I tried to install windows vista on my laptop but I m unable to start because of a message error loading operating system.

  I tried to install windows vista on my laptop but I m unable to start because of a message error loading operating system. good quick response.

  Hello

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Here's how to do a clean install of Vista:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  See you soon.

• need to install windows 7 but the laptop has initially windows 10

  Hello

  I need to install windows 7 but the laptop has initially windows 10.

  I'm not very satisfied with windows 10 because we need to separately purchase MS office.

  can someone guide me pls the process...

  Option 1:

  How Downgrade Windows preinstalled 10 for Windows 7/8.1

  Option 2: (recommended)

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  Buy Microsoft Office

  Office of 2016 for the House, students and professionals - Microsoft Store

• How many times can I install Windows 7 on your PC even after I continue to update the hard drive SSD for a bigger?

  How many times can I install windows 7 on your PC even after I continue to update the hard drive SSD for a bigger? Unlimited?

  Mike

  There is no limit.

• Cannot install Windows 10 on Asus laptop

  I tried to download on my laptop 10 window and it doesn't work. The work of upgrading and I get a message that my laptop is good for the window. I have Asus laptop! I need help please!

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• After I installed Windows 7 on HP laptop, get the message "not plugged in charge."

  Same laptop, charger even worked well in Visa. After a clean install of Windows 7, I get the message "not plugged in charge."

  On my system:
  HP / Compaq Mobile Workstation 8510w
  The charger is intended to be used for an additional cost / secondary battery - which worked fine under Vista when connected to the laptop. Still, ordinary charger works fine in Windows 7.

  So my question: must be unwanted software in Windows 7. Somehow, she acknowledges that it is not the normal charger and refuses to use it - but since it worked fine under Vista I would like to continue using it.
  How can I do this in Windows 7?

  Concerning
  Wolfgang

  I had the same problem with my Compaq after upgrade of a cell of 12 after battery box white market. What I did first, was I uninstalled and reinstalled ' Microsoft ACPI - control method battery compatible "and who did not work, so I followed the following steps:

  1. a laptop battery and remove (while on).

  2. open the lid and remove the AC adapter / CC (for again, turn off the system)

  3. close the lid and plug in the battery

  4. open the cover, plug the AC adapter and turn on.

  After I did the above, my system began to charge the battery. Some people say that after step 2, shut down the system before you unplug it from the AC. I don't have because most of the solutions I found does NOT shut down the system first. If you've been careful with your system, this time above should not do harm to your laptop

  Matt102

• Install Windows 7 on a laptop computer Windows XP

  My wife has an old laptop running Windows XP. I have a whole new version of Windows 7, never used on any PC and want to install on his laptop computer. I saved all the necessary files and folders for it. I can just do an install of Windows 7 on her lappy and if are all the drivers and utilities on the version of Windows 7 that I have? I have a 32 bit and 64, disc but no drivers and disc utilities. I will be able to complete the installation? The answers would be useful, thanks in advance.

  Mike

  Moved from the installation of XP, set at level and activate Forum.

  Hello

  Until you try to install Windows 7, follow these steps:

  Go to your laptop manufacturer's website and check if Windows 7 drivers are available for your make and model laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.