Installation and running of ESXi on a dual processor system

Similar Questions

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried it several times redownloading. What sh

  Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried to re - download several times. What should I do? Here is a picture of what happens:

  See if the following can help:

  White screen

  https://forums.Adobe.com/thread/1249756

• Cannot install flash player. After you download the Adobe FLash Player installer and running, a gray pop-up window opens but nothing does not appear in it. There is no progress bar or whatever it is.

  Cannot install flash player. After you download the Adobe FLash Player installer and running, a gray pop-up window opens but nothing does not appear in it. There is no progress bar or whatever it is, and even after keeping it running for a long time, there is no progress. Please help with this question.

  Hi Rlap,

  We are aware of this problem and are working on a fix.  In the meantime, please use the offline installation program, displayed at the bottom of the help page corresponding to your operating system and browser:

  • Installation problems | Flash Player | Windows
  • Installation problems | Flash Player | Mac

  Installers are at the bottom of the page, in the section "problems".

  --

  Maria

• Help: English Version Acrobat XI installs and runs in Swedish.

  I am a customer of USA using English for usa. I downloaded the Acro Pro XI installation package three times from Adobe, time after the purchase (which seems to be a separate download process) and as a trial download using the Adobe download install program... Different sites, different methods. Manually installed twicw, allowed the download of Adobe install twice and installed on two different computers. Eash time, the opening sequence and various other pages/windows are in Swedish, not English. During the installation, English is chosen each time... These Swedish screens include various web links in Swedish and "local" screens I have ten screenshots of Swedish screens. I spent 2 hours with a technical support, try a variety of bugs, including repair.modify, uninstall re - install and uninstall and re - download, install: all to nothing does not. WTF?

  Any ideas?

  Windows XP Pro SP3

  500 GB of free HARD disk

  3.4 GB of ram.

  Your help will be most appreciated.

  Please try this:

  1) go to Control Panel - Add Remove programs

  (2) select Acrobat XI. Click on 'change '.

  3) click "next". Select 'change '. Click "next".

  4) click on the plus sign for the icon 'languages '.

  (5) remove all languages other than English and click on 'Next' and then click on "Update".

  Please let me know if it works or not.

  Thank you

  Amish.

• CC of Photoshop installs and runs but usually replace CS4 as default program

  Recently, I downloaded and installed cloud through it and creative Photoshop CC. The program opens and works very well.

  The problem is my old software was CS4 if it has been set as the default program to open the images with. If I right-click on an image and select 'Open with' only CS4 appears. If I then click on "choose program by default" go to "C:\Program Files\Adobe\Adobe Photoshop CC (64-bit)" or otherwise go in "C:\Program Files (x 86) \Adobe\Adobe Photoshop CC ' and then select Photoshop.exe, in the window of the select program, CS4 appears and not the new Version CC.

  I have not uninstalled CS4 from the computer as long as it's not my call to make (it's on a computer of the company) and when I looked at the uninstall it tells me that I must remove the license and I'm not sure if this means "remove from this computer to place on another' or once removed from his party and the company would have to buy licenses again.

  I have tried everything I can think that Photoshop CC therein instead of CS4.

  What is even more annoying is that I don't have this problem with other software like Illustrator, InDesign or Dreamweaver as they appear in the section 'open with '. And on another computer in the office, we downloaded Photoshop CC and this problem never happened.

  I could just open photoshop CC and then open the pictures from there but I think I should resolve this issue

  http://superuser.com/questions/33651/why-cant-change-the-default-program-to-open-an-extens ion-in-windows-7

• I7 2600 k P8H67-i Deluxe MB and vCenter Server ESXi 5 appliance

  I7 2600 k P8H67-i Deluxe MB and vCenter Server, 16 GB, and ESXi 5 device

  One has been able to run vCenter Server Appliance on this material?

  vCenter Server Appliance does not start

  I run ESXi 4.1 on a server and more office built a user-friendly machine for ESXi 5

  ESXi 5 start ok, installs and runs a test VM ok.

  But after downloading appliance vCenter server and deployed the ovf, the virtual machine will not start.

  I'm reasonably confident that the deployment was OK, as I've done it before on ESXi 4.1 (but on a server with Xeon processor).

  The message of the console is

  
  Message of the Virtual Machine
  This virtual machine is configured for 64-bit operating systems. However, 64-bit
  operation is not possible.
  Longmode is disabled for this virtual machine
  For more information, see http://vmware.com/info?id=52
  Continue without 64 bit support

  Yes

  NO.

  If I select 'No', I get 'not enough video RAM.

  If I check the box 'Yes' I get

  This kernel requires an x 86-64 processor but only detected an i686 CPU.
  Could not start - please use a kernel suitable for your CPU.

  I've been through settings and advice re longmode, but just can't get the right settings.

  Thanks in advance for any response

  In order to run the 64-bit clients, you need to enable 'VT - x' in the system BIOS. In addition to this I also recommend you activate "Execute Disable Bit" and - if necessary - disable "VT - d" as well as "Trusted Execution". Once done, save the BIOS settings and the power of the system (power power off) cycle. If this does not resolve the problem, thanks for posting the latest vmware.log of the virtual machine.

  André

• Photo Story 3 install and run on Windows 7?

  Welcome to Windows 7 my party on Thursday will be be moistened with a little to have to say goodbye to Photo Story 3.

  I activated my Windows 7 laptop last night and tried again the download/installation of the PS3. This time it let me download, but with the same end result, a message saying "Photo Story 3 for Windows cannot be installed on this version of Windows... ».

  PS3 continued to work properly on the laptop after it has been updated since a Vista on a Windows 7 system... last night, after activation Win7 I did another check to download/install. After uninstalling the PS3, I was able to download it, but run the msi installer file ends with an error message saying PS3 does not work on Windows 7.

  He ran very well on all the beta versions and continued to run well on my Vista system upgraded. What is the official end of the line for Windows Photo Story?

  Photo Story 3.1 installs and runs fine on Windows 7 with no need to do anything to ensure compatibility. This is the version included in the following Microsoft Digital Image 2006. Installation is done via a setup.exe, not a .msi file.

  PapaJohn www.papajohn.org

• Get ESXI, up and running, but I have changed the NETWORK card settings, how do I fix? Help please!

  ESXi perfect on my server but stupid ass me were running so I

  play with the card NETWORK card and I changed to 1000 end, and it was

  100 MB and I forgot I was on a 10/100 switch,.

  in any case now I

  cannot ping or you connect the box to esxi...

  What should I do?

  The

  Server is a dual nic, should I connect the other cable network and

  Configure the which? will it work?

  I changed it using vSphere client...

  Connect a monitor, keyboard and mouse to the host (as when you installed and initially configured ESXi)... Connect to the host interface and select the option "configure management network". Clear the existing NETWORK card, and then select the second network card. You will have to regularize, save the configuration when prompted and let it restart the management network. You should be able to manage the host by connecting the client vSphere again. Then, you change the network configuration to match the new settings, or difficulty of the NETWORK card that you have initially activated to use.

  Is the host within a data center/server room? Why is the selector located only 100 MB? If the switch is able to go in the UK, ask that the host port ESXi will use either door to Go, full-duplex. Otherwise, you create a bottleneck, where it can be easily avoided.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Installation and first run of the FF, I get a box that obviously requires a response, but it contains no words, and does not occur when you click it.

  Installation and first run of the FF, I get a collection box that is displayed for about 5 seconds after the program loads and displays the first screen. It obviously requires a response, but it contains no words. The box doesn't cause any Word show either. the screen takes over and no other button cannot be clicked: I have a hardware failure on FF.

  Empty the gray bar, box, box white, question mark?

  This irritating box was related to an add-on for AOL. In order to remove the extension of the problem, you will probably need to start Firefox in Safe Mode so that it does not work.

  You need to close Firefox anyway, you can, for example:

  • ALT + F4
  • Right click of its mosaic on the taskbar > close all windows
  • (Ctrl + Shift + Esc) Task Manager

  To start Firefox in Safe Mode, hold down the SHIFT key while double-clicking the shortcut.

  A small dialog box should appear. Click on 'Start mode safe' (not update).

  Then you can go to the Add-ons page using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the right, locate AOL.

  A little luck?

• What would cause third-party software not to install if Windows Installer is running and up to date, and the PRC is launched?

  Still trying to install a printer from Eastman Kodak to a computer that was just recovered. I have new versions of Windows Insataller and the third-party software for the printer. However, even when I put the installer on "automatic" and "start" the service, it won't stay like this. I run regedit, msiexec.exe / unregister and msiexec.exe/regserver. Nothing happened. I checked the system had full access to HKEY_CLASSES_ROOT. no problem. I ran chkdsk. Hard drive looks very good.

  I need a response that I'm getting a little irritated that something as simple as install a printer should take this amunt of work. Oh, BTW, running Windows XP Home Edition, 2004 computer version. I don't know if this helps or not. The only thing I'm NOT willing to do is another system of recovery. That's how I got here in the first place. So, if anyone out there has suggestions, ideas (no matter how strange), ar solves this problem, I would greatly appreciate a response.
  Thank you
  songtothesirens

  Hello

  Re-install Windows Installer and see if it helps.

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003

  Note: Run method 2 from the above link.

  Hope this information helps.

• SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

  How can I fix this error? Thank you.
  SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

  Hi DMarie125,

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

  Hope the helps of information.

• Installation Wizard downloads and runs the HP printer

  Learn how to download and run the wizard to install printer HP (PIW). Printer Installation Wizard allows to solve many common installation problems, such as finding the correct driver for your printer, using your HP printer the same way that you used with your old operating system. Printer Installation Wizard is not available for all products, only works in Windows 7 and Windows 8, and you connect your printer to your computer with a USB cable to run the wizard. For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support. This video was produced by HP.

  I hope you find this information useful.

• Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to the installation of Windows updates?

  3. do you have security software installed on your system?

  Method:

  Follow the indicated link and perform the steps and check if it helps fix the problem.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  Let us know if it helps.

• How to run Qemu and KVM on ESXi?

  Team,

  Can someone please guide me: how to run Qemu and KVM on ESXi?

  Thank you

  John

  Follow please: http://www.virtuallyghetto.com/2014/09/how-to-run-qemu-kvm-on-esxi.html

  Thank you

  Venance