What would cause third-party software not to install if Windows Installer is running and up to date, and the PRC is launched?
Still trying to install a printer from Eastman Kodak to a computer that was just recovered. I have new versions of Windows Insataller and the third-party software for the printer. However, even when I put the installer on "automatic" and "start" the service, it won't stay like this. I run regedit, msiexec.exe / unregister and msiexec.exe/regserver. Nothing happened. I checked the system had full access to HKEY_CLASSES_ROOT. no problem. I ran chkdsk. Hard drive looks very good.
Hello
Re-install Windows Installer and see if it helps.
Note: Run method 2 from the above link.
Hope this information helps.
Tags: Windows
Similar Questions
-
What would cause variable header does not update?
I looked on all the details. Cannot understand it.
I enclose the screenshots you can see that I have defined and all good inserted.
The header meets the part a written in the correct paragraph style and it meets the second part, idem, but the third part, which is exactly the same thing and one and two is not 'take '. I applied my master to all THE PAGES
You must cut the hat of the clipbaord and then paste at the bottom of the story in the previous image until you put on this image in history, other wise of the position of the winds upward at the end.
-
It says protected (Q) and then when I click on it I get the error access denied message. I'm the only one who uses this computer.
MS Office in its Click-to-Run version creates a unit Q is not accessible to the user. Obviously, you have installed the version CTR of Office...
-
I have uninstall it by accident with Adobe Acrobat PRO DC with third party software. Now I can't install Adobe and creative cloud does not load apps. How a fix it?
Hey bellmarg,
Please uninstall Adobe CC using this cleanup tool use the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer & reinstall it using this link Adobe Acrobat Pro DC: PDF Converter, convert PDF files from anywhere.
Let me know how it goes.
Kind regards
Nicos
-
original title: reorganize the C drive
I am very short of space on drive C (system disk). I've been advised to rearrange the drive C partition, as I have a lot of space on the D drive. What is the best way to do this without losing any data on C or by altering the system? Can anyone recommend Vista management computer or maybe third-party software such as the Partition Wizard.
Hello
read this topic to regain free space on C:
see if this program helps you to determine what is take up space
http://www.Jam-software.com/treesize_personal/
by default system restore will have up to 15% of the capacity of the hard disk
you would like to reduce this amount
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.vista4beginners.com/system-restore-space-used
also use disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
also scan for malware
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
and read these information from microsoft on windows optimization
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
and using vista disk management you need to delete D: and extend C: into the unallocated space where D: is
You can't fire a piece of D: on C: using vista DM
Save all data, because it will be lost on D: and make sure that D: is not your recovery partition
http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html
-
I downloaded CoolSoft VirtualMIDISynth more Web Soundfont v1.0. I'm unable to set up virtual machines to recognize the virtual computers. Only GS Wavetable, as I understand it is not in the operating system.
This is a 1 years computer with card mother i5, available on the 200 GB drive and 16 G memory.I am the author of Web SoundFont and I'll be happy to help you if you are having problems with my Bank and CoolSoft VirtualMIDISynth.
I second the comment of S.V. Sissi, even if your problem is mainly with newer versions of Windows, which simply do not have the control panel you are looking for choose the default of MIDI output device to be used in all Windows applications.This setting was not available up to Windows XP, but with newer versions, you will need to use third party software to configure it in a friendly way. On Vista/7, you can use the combobox control, you will find under the tab "MIDI Mapper" CoolSoft VirtualMIDISynth settings window.On Windows 8, there is an alternative workaround available, although more difficult to apply than MS simply locked access to the MIDI Mapper to force using internal MS/Roland GS software Synth. Quite a bad decision for all lovers of noon with good hardware or software synths on their computer...You will find all the information you need on the site of VirtualMIDISynth (http://coolsoft.altervista.org/virtualmidisynth and http://coolsoft.altervista.org/en/blog/2013/03/what-happened-midi-mapper-windows-8). -
Uninstall third-party software
Hello. When I install software that requires simply by dragging the applications icon in the 'Applications' folder, I feel comfortable just by dragging it to the trash if I don't want. But when an application uses a Setup program I did not. The application that worries me particularly (but also other applications installed) is "Tune Up My Mac". I unintentionally installed its developers because he FRAUDULENTLY"portrayed as free. Yes, it is free to download, but it costs $40 to use it. And it runs automatically whenever I start my computer and gives me a hard time when I try to stop it. I don't have $ 40 to spend on it, even if I thought it was worth. So can someone please tell me how safely and completely get rid of it? TIA
Any software, no matter from where it comes, which aims to 'clean up' or 'speed up' a Mac automatically is a scam.
Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.
Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.
I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.
Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.
Back up all data before making any changes.
Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.
If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.
Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.
-
Are third party software to convert dynamic disk to basic Drive Safe?
Hi all
I installed Windows 8 Pro on my laptop recently. Now, my hard drive got converted to basic dynamic. I want to use third-party software like EaseUs Partition Manager or Assistant Partition AOMEI. I want to know if it is safe to do so? Are there Complications?
Hi harsh,
Note:
There is a high risk of data loss. Make sure that you back up all the your impotent data before trying these steps.
You can try the steps from here (article is for Win 7, but it also applies to win 8)
http://TechNet.Microsoft.com/en-us/library/cc755238.aspx
See the section additional Considerations of the article mentioned above.
- The disk must not have any volumes nor contain no data until you can change to a basic disk. If you want to keep your data, back it up or move it to another volume, before converting the disk a basic disk.
- Removal of volume will erase all data.
Once the disks are converted to Basic, you must reinstall the operating system or to perform a factory reset.
-
I get multiple research work emails (E/JS) and ecommerce. Some of them have a "Correct".
'St. Michael Job Assistance Ministry - JAM' FA (SMJAM-JAM).For some reason, however, some of the emails from other sources, downloading the verizon pop3, E/JS server are indicated (wrongly) as having the FA SMJAM-JAM above. This situation prevents my email filters to plug these emails to their appropriate mail folder.
Also, when the steps in order to transmit emails showing incorrect information of FA SMJAM-JAM, the e-mail is no longer present incorrect information of FA SMJAM-JAM but shows rather the correct information of FA that had been specified on the verizon pop3 server.
address ROM"(FA) in some emails, when downloading from the pop3 server, is replaced by a 'common' 'FA '. [email protected]
What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?
Hello
If I understand your problem, I think it may have to do with the addresses stored in your address book. Thunderbird can display the name of your address book instead of the name of the post office, where corresponds to the e-mail address.
Check your address books to see if you have a bad entry for mail addresses get listed wrong.
Also check under Tools-> Options-> advanced-> reading & display if you have checked the option to see show it only the names of the people in my address book. If you uncheck this option, the name and the address must be...
-
Compatible third-party software list
Hi all!
I'm trying to understand if some third party software are compatible with OS X 10.11, someone could suggest me a site/list or another document where I can always find updated compatibility matrix?
Thank you
Good bye
Request to check the compatibility of applications
If the app does ' t start automatically, you must click on the button "go to the compatibility table.
-
What would cause a SQL server to blue screen with FFFFF81001BA5198 code
What would cause a SQL server to blue screen with FFFFF81001BA5198 code
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
Hi all
We have 60 knots which is connected with the windows domain. How to monitor the activities of internet users via the windows server
without third-party software.
Thanks in advance
Alam
Hello
The business support, you can find forums on TechNet, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Need to install Thai and arbic on my xp OS.
Hi there I was wondering what would cause my add language option butoon must be disabled, whiles add East Asia was available. any help to solve this problem. I need to install Thai and arbic on my xp OS.
See you soon
Hello
You can check these links:
To install the files for East Asian on your computer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_install_languages.mspx?mfr=true how to enable support of the Arabic language in Windows XPhttp://support.microsoft.com/kb/821080how to add and enable additional languages in Windows
http://support.Microsoft.com/kb/177561 -
My iTunes does not detect my iPad. I use Windows 10, Norton 360 and the latest version of iTunes. All software are up to date, and each says it works correctly.
Turn off or get rid of Norton. I really don't see why you need it.
-
Everything on my XP request too what program to run and the absolotly nothing works
Everything on my windows XP application too what program to run and the absolotly nothing works has a virus and removed and that's how he left me nothing works virus disappeared, but all that happens when I try to open anything is what program I select the program, it must be running and then it asks which program to run again with this thing I just want to reset or repair but I can not even Get factory reset to work cause the recovery disks don't download help me please?
more old XP and tried to use just the hidden reset the score at the factory, but apparently its not still installed, it's a nightmare, nothing works at all the
Example: I try to open itunes shortcut fail... what program you want to run this with... Browse, go to itunes, click on the main iTunes or any other program folder so she asks what program you want to run this with and so on and so fourth and it does with absolutely all programs on my computer
Example 2:i tries to go to the control panel to use anything, and almost all alone there is an error no internet Explorer doesint work go if I'm going in, it just stops, but I can't go to google... and all that fun stuff
no idea on how to solve this problem would be insanely useful thanks
Windows XP file Association problems
http://www.dougknox.com/XP/file_assoc.htm
EXE file Association problem (association of default restore for EXE files)
LNK (shortcut) file Association Fix (restores default shortcut behavior)
HTM/HTML Associations (Restore the default associations for htm/html files) and/or
URL file Association problem (restores default associations for URL - Internet shortcuts)
COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
Difficulty of file Association (restore the default associations for BAT files)
CAB File Association problem (restore the default associations for CAB files)
CPL file Association problem (restore the default associations for CPL files)
COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
Directory Extension difficulty (restores default HKCR\Directory)
EML file Association problem (default restorations for the EML files)
EXE file Association problem (association of default restore for EXE files)
File Association problem (restore the default associations for file folders)
HLP file Association problem (default restore for HLP files associations)
HTM/HTML Associations (Restore the default associations for htm/html files)
ICO file Association problem (restore the default association for ico files)
INF file Association problem (restore the default binding for the INF files)
Internet Explorer Desktop Icon problems (restore the default behavior for the desktop IE icon)
Difficulty of Association JPE/JPG/JPEG (restore the default associations for jpe/jpg/jpeg files)
LNK (shortcut) file Association Fix (restores default shortcut behavior)
MPG/MPEG File Association problem (restores default associations for MPG/MPEG files)
MSC file Association problem (default restore for MSC files associations)
MSI File Association problem (default restore for MSI files associations)
MSP File Association problem (default restore for MSP files associations)
REG file Association problem (default restore for REG files associations)
SCF file Association difficulty (default restore for SCF files associations)
RCS File Association problem (default restore for SCR files associations)
TXT file Association problem (default restore for files TXT associations)
TIF/TIFF File Association problem (restores default associations for TIF/TIFF files)
URL file Association problem (restores default associations for URL - Internet shortcuts)
VBS file Association problem (restores default associations for VBS files)
ZIP file Association problem (restores default associations for ZIP - file REG folders)
Maybe you are looking for
-
I just want to change the color of the button but it there as many files of code so much, and I can't find a page that will tell me it please help
-
HP Envy J049TX: Beats Audio Control Panel is not start/work
My Beats Audio Control Panel does not work. When I Open Beats Audio, a dialog box appears indicating that "IDT Audio from PC has stopped working" I have recently upgraded to Windows 8.1 and the only problem I found was that the Beats Audio Control Pa
-
Could not stop windows 7 hibernation
my machine windows 7 will not stop in hibernation. whenever I come back in the morning. I went to the power management and hibernation, and sleep is set to NEVER.
-
Hello I have a Toshiba satellite c55d-a - 14g laptop, bought a year and a half. It just stopped reading original DVD. It is used to do a year ago. Now, the DVD is not even turn inside. The driver works with the DVD I burned myself. I am attaching a p
-
Installation of DBD::Oracle error
I installed following the customers oracleOracle - instantclient11.2 - basic - 11.2.0.1.0 - 1.x86_64.rpmOracle - instantclient11.2 - devel - 11.2.0.1.0 - 1.x86_64.rpmOracle - instantclient11.2 - sqlplus - 11.2.0.1.0 - 1.x86_64.rpmAND I put below vari