Installation clean P580 Win 7 Ultimate 64 bit - cannot install Intel USB 3.0 driver

Similar Questions

• Installation clean P580 Win 7 Ultimate 64 bit - cannot install driver Intel WiFi correctly

  Driver installation went well after a clean install. I was not aware of any special settings or any need to install some drivers in the order. So maybe I did not just something.

  I noticed that there was no WiFi service. I have downloaded and run the file 0zwl03ww.exe, which is listed as driver WiFi Intel for Win 7 32/64. I got a message saying that something could have trouble with the installation. So I chose rerun. Asked me if I wanted to replace an existing file. I said "Yes to all". The result was a message saying "access denied." Later, there was still no WiFi and no WiFi service pilot shown in Device Manager.

  I restarted the PC, hoping it would help. Still no WiFi and no shown in Device Manager.

  I looked at the folder C:\Drivers containing the driver files and subdirectories. I removed those and tried to delete the folder. I didn't have the right to do. I checked the security settings on the folder and showed a red X with a message saying that the security settings are not available.

  When I try to reinstall the driver, I get the same results reported (files to be replaced), but no files are displayed in Windows Explorer in this folder.

  I tried to restore the original file to the Recycle Bin. Restoration happened, but now the files are gone.

  There is another pilot provided for Liteon & CyberTan; This doesn't seem to be the right driver.

  If the PC is running, LAN, internet cable OK - but I'm stuck with no WiFi. Can anyone help? Thank you!

  I found and ran a setup.exe for Win7 inside the extracted folder. I went through the typical installation of choice routine and told me "The Intel ProSet Wireless WLAN software Setup Wizard ended prematurely" with no further explanation given.

• What is the BEST Registry Cleaner for Win 7 Ultimate or Pro 64 Bit OS version?

  What is the BEST Registry Cleaner for Win 7 Ultimate or Pro 64 Bit OS version?

  When I search on the internet with the same Question, I get hundreds of links and each company says it has the BEST Software Registry Cleaner to 100% and I bet that 99% are liars!

  Microsoft really needs to TEST all registry cleaners & make a list of the Top 5 BEST software for many different uses and post this list for your clients may know what is the best to use to fix their PC problems.

  Please, I beg you!  Nice and help your customers who have purchased and use your Microsoft software...  Ok??

  Microsoft really needs to TEST all registry cleaners & make a list of the Top 5 BEST software for many different uses and post this list for your clients may know what is the best to use to fix their PC problems.

  Microsoft does not recommend to use a registry cleaner.

  Slow PC? Optimize your computer for optimal performance:

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  «Note: this article does not meet or recommend tinkering with the registry files.» These activities can harm your computer and should only be attempted by trained professionals. »

• HP Pavilion P7 missing SM Bus Controller Driver WIN 7 Ultimate 64 Bit

  I just replaced a HARD death drive in my Pavilion P7 (1246, c) and after the installation of Win 7 Ultimate 64-bit and the drivers, Device Manager indicates that the SM Bus controller has no driver installed. There is also no sound. I think that this desktop pc Chipset Intel H61. Help please!

  I found the driver chipset... Intel has moved the to a different category chipset drivers. SOLVED

• Problem reinstalling Win 7 Ultimate 64 bit

  I've recently updated to Win 7 Ultimate to win 10 Pro. I don't like like Win 10 and want to return to Win 7 Ultimate. However, the rollback feature Win 10 says that the files for Win7 is not found. I have inserted my official Win 7 Ultimate 64 bit OS dvd to reinstall manually, selected my C drive and started the reappattage. It stops and a message that "the/a driver required is not found." The installation cannot continue. »

  I tried to install it on a secondary drive but got the same message.

  I've never had this message when I have already installed and reinstalled Win 7 from this disk.

  Help, please! Thank you!

  I'm going to wipe my drive and try again. What is the url for Digital River, in case I need to download a copy? I have my MSoft product identification number for the disk.

  I have also several external drives connected to my PC via the USB port. Would possibly be the cause of the problem?

  Disconnect non-essential devices can improve the success of the installation program.

  Use of Digital River to be an option available for download of real reinstall media. It no longer exists, you must use the Microsoft software download page.

• Several crashes on Win 7 Ultimate 64 bit

  I have a problem... win 7 ultimate 64-bit hangs unexpectedly and at random. at the start, normal operations, start repair, safemode etc... None of the codes of error, bsod, event logs (except the one that says windows has not been closed properly).

  Win 7 Ultimate 64 bit

  2 hard drives internal 1 TB

  8 GB RAM (DDR3-1600)

  Norton 360

  MSI card mother E765

  Chipset ATI

  AMD Phenom II Quad core 965

  On board sound driver

  Impossible to run Norton Utilities to clean up, can't run Malwarebytes to scan system crashes to half or less per process. I have re-sitting all the fleas memory, cleaned and replaced CPU and CPU fan, cleaned and replaced video card.  system file check-no problems. When malware and utility could not be run, no problem found. It makes me crazy. can not run the debugger - the system crashes. is there a way to slick the HARD drive and start over? It is shouting software or could virus/malwware...haven't or format HARD drive any help appreciated

  Hello

  You may need to try to boot an alternative operating system to perform a complete audit of malware:

  Configuration/settings (BIOS/CMOS) often F2 as you start to look at the screen - the boot
  for CD/DVD first and start with these to run audits of malware and the removals. Be
  Be sure to set the order started back when finished.
  

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  System Rescue CD
  http://SysRescCd.org/Main_Page

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ========================================================

  Windows Defender in offline mode

  What is Windows Defender in offline mode?
  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  Windows Defender Offline: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ

  System requirements Windows Defender in offline mode
  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-system-requirements

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My c700 that will may change win 7 ultimate 32 bit to 64-bit

  My c700 that will may change win 7 ultimate 32 bit to 64-bit

  Hi @gujju1,

  Thank you for joining the HP Forums!

  I understand you're wondering if your HP c700 computer can be changed to Windows 7 Ultimate 64 - bit. I am pleased to see that for you!

  Yes, this computer can support 64-bit. You have to just reinstall the 64-bit version. Be sure first to backup your files .

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  Hope that answers your question and have a nice day!

• 15 - ay050nm: two drivers for WIN 7 Ultimate, 64-bit

  Hi, I need two drivers for HP 15 - ay050nm, WIN 7 Ultimate, 64-bit:

  (1) PCI encryption/decryption controller

  PCI\VEN_8086 & DEV_2298 & SUBSYS_81F1103C & REV_35

  PCI\VEN_8086 & DEV_2298 & SUBSYS_81F1103C

  PCI\VEN_8086 & DEV_2298 & CC_108000

  PCI\VEN_8086 & DEV_2298 & CC_1080

  (2) unknown device

  ACPI\MSFT0101

  * MSFT0101

  Thanks in advance,

  Ivan

  Hello

  Please make sure that you create a system on the laptop restore point and backup all data.

  http://support.HP.com/us-en/document/c03327545

  Please download the below link drivers

  http://support.HP.com/SI-en/drivers/selfservice/HP-15-notebook-PC-series/10862300/model/12319391

  Kind regards

• Creative Sound Blaster Audigy 2 not recognized ZS running Win 7 Ultimate - 64-bit

  Friends,

  I have a situation where I ask for a help. It's as follows:

  1. the old desktop that PC is equipped with a device for Creative Sound Blaster USB based - Audigy 2 ZS attached, it was purchased in August 2008 and since then, initially worked with Win XP (32-bit) - August 2008 to Oct 2012, then Oct. 2012 (when I upgraded the operating system to Win 7 Ultimate 64 bit) until last week when I upgraded the PC hardware.

  2. However, after the upgrade, the PC does not recognize this device shows at all - a yellow exclamation mark with a label "unknown device" in Device Manager, when I connect the device to the USB port.

  3. the last time (in 2012) when I upgraded the OS on the old XP PC to Win 7 hardware, the operating system recognizes the device even without installing the drivers (i.e. for Audigy 2 ZS of Creative) and he has been active (usable), as soon as I plugged the same. However, later I applied Win 7 64 bit drivers from the Creative support site. Now, even though I applied the drivers for Win 7 64 bit for the device, it is not recognized under Windows.

  At the config of my old PC: Intel Core 2 Duo CPU E6540, card mother Intel graphics card Nvidia GT 220, some hard drives SATA 2 x 250 GB, 8 GB of RAM.

  At the config of my new PC: Intel Core i3 (3rd generation), card mother Gigabyte, graphics card Nvidia GTX 650, SATA 1 x 1 TB hard drives & 1 x 250 GB, 8 GB of RAM.

  I understand that this question, referring to the Creative device, should not fall directly under the responsibility of Microsoft, however, I looking for entries from anyone who may have any suggestions or is faced with identical situations / similar. Thanks for the patience to read this long query.

  -Milind

  BossDweebe,

  Thanks for the suggestions. The origin of difficulties - the PC also has graphics card Nvidia GTX 650 and as part of the package of drivers for this graphics card, HD Audio driver (Nvidia) also was installing. This HD audio driver not allow Creative Audigy 2 ZS on USB to be recognized as an audio device. So I had to remove the HD from Nvidia audio driver and then install (an update) Creative driver for the device. It worked.

  Thanks for your suggestions.

  -Milind

• Error message: "the version of this file is not compatible with the version of Windows that you are using", when you try to run an old ms - based back program in Win-7 Ultimate 64 bit.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.

  "The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)

  Hi Bcopeland,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  You can check the compatibility of the program with Windows 7, in the Compatibility Center.

  Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  a. click right on the program.

  b. click Properties.

  c. click on the tab compatibility.

  d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.

  Here is an article that gives you more information on this:

  Make older programs in this version of Windows

  If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

• Not to install the drivers for HP PSC 1410 on computer running Win 7 Ultimate (64 bit)

  Hi all!

  I have been with my HP PSC 1410 with my old computer for a while now, without any problems. However, since the time I upgraded my computer and the operating system (Win 7 Ultimate (64 bit) recently, I find that, although the printer prints my documents and scan them in a certain measure, there is always an exclamation point icon that appears on the device, indicating that it does not work as it is supposed to. I tried to download driver from the HP site files, but the problem won't go away. Any suggestions, anyone?

  Have you installed the printer according to the instructions from HP, which is to install using the cd of HP, or the full software from HP support features and only connect the printer when prompted, or just connect?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=UK&DLC=en&sw_lang=&product=441115#n195

• BitLocker does not not in win 7 ultimate 32 bit

  I used bitlocker to lock my disks on win 7 ultimate 32 bit, it worked very well. However lately, I reinstalled win7 ultimate 32 bit and locked by bitlocker drives do not react

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

  Hope this information helps.

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• (Win 7 Ultimate) 32-bit to 64-bit without

  Hey guys, I'm pretty new to computers, I just have a question. Can I switch from 32-bit Win 7 Ultimate to a 64-bit version, I do not have the CD right? Thank you very much.

  You can upgrade, but it will be a "Custom" / Clean install because there is no direct path from a 32-bit OS to a 64-bit version of Windows. "" See detailed information on getting a 64 Bit DVD and installation procedures below the dotted line.

  What this means is that you will need to re-install all of your applications and make a backup of your data (Photos, music, Documents, Etc.) files before start you.  I also suggest that you create an image backup of your existing installation of 32-bit as safety net.

  You will also need to download 64 bit versions of the brand device drivers your computer and model number. Install the drivers once the upgrade has been completed, starting with the chipset driver and then install the drivers, SATA, USB, Audio, LAN, or the Internet, wireless.

  = Image backup utilities =.

  EaseUS Todo Backup Home V6.5 http://www.TODO-backup.com/
  Free version: http://www.todo-backup.com/products/home/free-backup-software-features.htm
  Includes: Clone of disk/partition, incremental backup
  User Guide: http://www.todo-backup.com/download/docs/User_Guide.pdf
  (Note: Todo install then create a diskette "emergency" before you start creating your first image backup)
  Version 6.5 supports XP, Vista, Windows 7, 8 and 8.1

  Acronis True Image 2014 - has a 30 day trial version available, trial key sent by email.
  Note: Initialization of cloning and the road (creating a MBR) are not supported in the trial version.
  For the trial version, only pick up is available when booting from a Bootable Acronis media.
  Install Acronis and then create a bootable media restoration/rescue CD before you start creating your first backup image
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/support/documentation/
  2014 supports XP, Vista, Windows 7 and Windows 8

  = Download and create an installation DVD.

  Download Windows 7 proper. ISO file that includes Service Pack 1
  (Note: must match for your product key version)

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  SHA1 hash: 6071B4553FCF0EA53D589A846B5AE76743DD68FC
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso
  SHA1 hash: 6C9058389C1E2E5122B7C933275F963EDF1C07B9

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  SHA1 hash: D89937DF3A9BC2EC1A1486195FD308CD3DADE928
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso
  SHA1 hash: 0BCFC54019EA175B1EE51F6D2B207A3D14DD2B58

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  SHA1 hash: 65FCE0F445D9BF7E78E43F17E441E08C63722657
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso
  SHA1 hash: 36AE90DEFBAD9D9539E649B193AE573B77A71C83

  (1) after downloading the correct .iso file install HashCalc and validate the SHA1 hash value
  is correct. If the download is not corrupted, the value HashCalc returns will be the value of SHA1 I posted.
  HashCalc: http://www.slavasoft.com/hashcalc/index.htm

  (2) then use ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to perform a 'Keyless Install"of Windows: (do not use your product key immediately)

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows.

  During the grace period, you can install your device drivers,
  run Windows updates and solve other problems or issues.
  Once you are satisfied everything is working properly, and then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = Run Windows Update =.

  Install the 'Important' updates that are available.

  Make a small group (10 updates both maax) of updates at the same time
  reboot if prompted and install another small group of updates and so on.
  registration of .NET Framework updates for the end.

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Workstation installation - MSI failed - Win 7 Pro 64-bit

  Hi all

  I just got a new system and I am trying to install Workstation 7.1.2 (trial) on this subject. System is running Win 7 Professional 64 bit on a processor intel I5 (couldn't find anywhere if the processor is actually supported, but I think it is).

  I get the error that says "the C:\*.* MSI failed.

  I did some research and in vain the following solutions:

  -run the file directly from c:\ (as administrator)

  -changed the name of the installer to something simple (setup.exe, buggy.exe).

  -extract the /e *.exe file and tried to start the installer directly

  -changed the location of the temporary file in c:\temp

  -Run the *.exe/z "action"="install".

  -disable UAC

  -re-downloaded and tried new

  -Downloaded the file smaller and tried everything again

  I'm quite at my limit of frustration right now, so I thought maybe something had this figured out problem. Most of the posts here point to what I tried.

  I have attached the log file in case someone noticed. I noticed a lot of messages "access denied to the LUA environment...". ». Other lines said that he could not find "eclipse.exe '...

  I appreciate any idea on getting through this.

  Thanks in advance,

  rkaram

  Have you had an older version before by chance? I think I saw a cleaning too listed in the downloads. Make sure that your antivirus and security software is disabled also. Which might be interfearing with the installation. It might be interesting to try the cleaning tool before attempting to install another.

  Joe