Installation fails on Windows Mobile 10

Similar Questions

• HP DeskJet 1512: DeskJet 1512 Installation fails with Windows 10

  I just updgaded my g7 HP Pavillion from Windows 7 to Windows 10 and I can not get my DeskJet 1512 to work.  I went to the HP site to shoot down the latest drivers from my drive for installtion of origin has no Windows 10 drivers on it.  Driver downloads, but the installation fails with the message: "the an installer for this device cannot perform the installation at this time."  I have administrator rights on my laptop, no one else is logged on, and I have no other applications running.  Any suggestions?

  Hey there John!

  Please try my suggestions and getting back to me. You can try downloading and running the print and Scan Doctor then choose "Difficulty of printing" and let it run its course. See what the end results you show here and then try again to print. Please also let me know what the results show.

  Try printing a few programs various (Notepad being one of them please) to see if the problem is with a single program, or all of them. Maybe a firewall can block the connection, try to leave this option off when you try to print from the few programs.

  Good luck! Enjoy your day

• HP 7310: HP 7310 all-in-One Driver installation fails on Windows 10

  I was thrilled to see that HP had a version of Windows 10 recommended its full printer driver, located at 7310

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-110183-3&cc=us&DLC=en&LC=en...

  As with most HP stuff and most of the things Windows, however, my pleasure was short-lived. I started the installation (after choosing "10 64-bit Windows" option) and everything seems to work as I remembered, and the installer even got to the point where he discovered my network printer. But then this black popup appeared in the corner of my screen saying "your app does not work with Windows 10". The idea behind spoke of how the application was using the old protocols or something which would be harmful to the computer. In the end, the installation failed - the 7310 HP does not appear in my series of printers installed. Total disappointment, I have come to expect.

  In the notes for installing HP says "If you only want the print (without the Photosmart Software Suite) driver, it is available as a separate download named"HP Deskjet basic driver"." In fact the pilot "baisc" would probably be all that I need. But alas it is unconnected with this driver and search both using the internal HP AND visa search engines search gives nothing.

  Anyone with ideas? HP driver has been updated 29/07/15 so this isn't old stuff. Thank you.

  So here's my solution. First of all, you get that you shouldn't be disturbed by installation failure message when you install this package on Windows 10. There are nine steps of installation and the ninth is to install a "Bing toolbar' or something like this. This is apparently an attempt to install a toolbar in Internet Explorer. The failure occurs because there is not Internet Explorer on Windows 10. This failure would have nothing to do with the failure of the connection to the printer.

  The solution is to install all the updates of Windows 10 before trying to install the HP driver software. I have two identical machines brand new with Windows on them factory installed 10. I have tried to install all the stuff before waiting for updates to Windows, and that was the one where I failed... the part 'add a device' on the first installation went well and has print a list of the activities of the network in its effort to talk to my printer, but in the end, it failed and I got the big red 'X' on the final schedule which appears (the 'X' was between the router /) portrays switch and the printer). After the updates of Windows on this computer, the installation was successful. Then with the second machine, I did the updates of Windows first, and on this machine, the HP installation was successful the first time.

  It could also be that it's specific hardware; It is possible that my Windows updates included an update from the manufacturer of my particular network interface, for example, and the network interface driver was the problem. My machines are the two model PowerSpec G415 computers to office who have a "Killer Z97X" mainboard ASRock, which I'm guessing that contains the material of common Intel chipset. In any case, good luck with that to all who follow in my footsteps. This one seems to have a happy ending for me at least.

• Repair installation fails on Windows 7 and get black screen

  I put in a repair disc and then I put in a disk to reboot and did he pulled upwards so that I had to do a reboot but got black screen saying something was not so tempted excessible to esc but used left me tried to restart again and it will not restart please help running windows7 64 bit

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Error "this version of Windows Genuine Advantage validation tool is no longer supported... "during the installation of Microsoft Windows Mobile Device Center 6.1 driver.

  New office and try to install Mobile Device Center so I can sync it with my old iPaq.

  I'm going to
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=3182
  with for? me
  http://www.Microsoft.com/en-GB/download/exe-validation.aspx?ID=3182

  I download and run the validation tool that says:
  This version of the Windows Genuine Advantage validation tool is no longer
  supported.  Please download the latest version and make sure that your system
  the clock is accurate.

  How can I get beyond that?  I can't find any other tool of validation.

  Chumpy

  Original title: how to download Microsoft Windows Mobile Device Center 6.1 Driver for Windows Vista (64 bit)?

  You MUST use Internet Explorer to download the elements necessary for validation and for validation.

• Microsoft wireless mobile mouse 3500 drivers installation fails in windows 7

  I bought a mouse wireless 3500 from ebay. the package so that the web of microsoft, said this mouse is compatible with windows 7. Unfortunately does not not for me. whenever I connect the nano transceiver, installing device drivers window appears but ends with drivers not installed successfully. Windows Update is an important update to update the driver by Microsoft for MS driver peripheral detection material but end installation with the error code 80070103.

  Please guide me...

  Hello

  You have installed the software from the CD that came with the mouse?

  Windows Update 80070103 error code indicates that you might be trying to install a driver is already installed on your computer.

  See this link:
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070103

  Follow these steps:

  Step 1: Try to install the drivers in the State of clean boot and check if it helps.

  Refer to this article for help:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Step 2: Uninstall the software that came with the mouse and reinstall.

  Download the software for your mouse wireless from the link below:
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=mouse&name=GMF-00010&OS=Win7_32&lang=en

  If nothing is done, then get in touch with the hardware Microsoft support for assistance.
  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = assistance & C1 = 502

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creative cloud Installer fails on Windows 8 PC

  I have can´t install Creative cloud on my computer running Windows 8.1

  It doesn´t work if I try to install the software of creative cloud on its own or with another app Installation starts but fails after "how to make a third" without a message.

  Uninstall anything cc installed on your computer to the victory.

  Run the cleaner use by the cleaning tool CC to resolve installation problems. CC, CS3 - CS6

  then install the cc from here, download Adobe Creative Cloud apps desktop application | CC free trial Adobe

• For Officejet 5610 driver installation fails on Windows 7

  My 5610 has worked very well for rquite some time on Windows XP. I have upgraded to a Windows 7 machine and need to install the printer driver. The driver that I downloaded on the website of HP goes through the process of extracting and then displays a message that says:

  "Runtime Error".

  Program «...» Installation program.

  "This application has requested execution to terminate in an unusual way."

  "Please contact support team of the application for more information."

  So, here I am.

  I also ordered the $ 10 at HP driver CD and get the same results.

  I tried to run the installer in Windows XP mode and same results.

  Thanks for any help you can offer.

  Thank you for the reference - looks/sounds complicated.

  However, I tried to install the downloaded file, and the CD of the software on a desktop computer in my office at home without the attached printer. When I moved it near enouugh to the printer actually connect and turn on, Windows 7 has recognized the printer, searched and installed the software, and now everything works - even the scanner.

  The software of HP still load, but now I think that I don't like.

  I'll test the fax feature, but I expect to work as well.

  If you please mark it as resolved, even if your software does not always load.

  Thanks again.

• Virtual PC installation fails with "Windows Update cannot be installed because of the error 2149842967"

  I have two laptops Lenovo X 201.  An installed Virtual PC/Win XP fine mode, the other gives the following when installing Virtual PC update. ;     (I made the hardware, virtualization and the Windows XP mode prereqs)

  (1) throws a dialog box titled saying "stand-alone installation of Windows Update": "update is not applicable to your computer."

  (2) in the event viewer, you see this message:

  Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\Windows\system32\wusa.exe" "D:\Downloads\Windows6.1-KB958559-x64-RefreshPkg.msu" ")

  (3) check in the registry for the following paths is identical between the two computers and recommended values

  HKEY_USERS\. DEFAULT\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  (4) emptied the folder "C:\Users\user\AppData\Local\Temp".

  (5) I do not receive the following symptoms

  (a) the low 'Register of space' error, sets the size of "unlimited" registry: so no need to change the registry setting

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
  Key: RegistrySizeLimit

  Other thoughts?   What does error code 2149842967 mean?

  Thank you

  Hello

  Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated. Feel free to post your request here on the Forums of Windows, we would be happy to help you.

  Thank you.

• Client installation fails on Windows Server 2008

  Hello
  
  I'm trying to install client Oracle on Windows Server 2008, I downloaded the correct version of the client, but cannot go beyond the verification of prerequisites.
  
  I have loaded down the following file on the Oracle site, which corresponds to the version of our database
  
  11107_w2k8_x64_production_client.zip
  
  I get the following error
  
  Full version. The result of this review is: failure of < < < <
  Problem: Oracle Database 11 g is not certified on the current operating system.
  Recommendation: Make sure that you install the software on the correct platform.
  
  Anyone know why I get this?
  
  Thank you...

  GR 11, 1 client material only is not supported on Win 2008 R2 - pl use client software of 11 GR 2

  See these Docs MOS

  1199616.1 - 11.1.0.7 client cannot be installed on Windows 2008 R2 or Windows 7
  867040.1 - management representation statement: Oracle Database 11g Release 2 - Microsoft Windows 7 and Windows Server 2008 R2

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e16774/TOC.htm

  HTH
  Srini

• OfficeJet Pro L7555 installation fails on Windows 7 (64-bit). "Fatal error".

  Printing/scanning doctor does not resolve.  Wired network.  This device works on my network for almost 2 years.  Has stopped working and will not reinstall.  Basic printing works, but cannot scan.  «LaunchNetworkInstall gets back unexpected value 1246.»

  In short, if you ar following the instructions to the letter - that is not possible.

  I downloaded the software from the link I provided and that you have provided. I chose the full features software and installed the printer on my Win7 machine. Both these pages appear in all versions of the software, and the page with the check box that requires you to accept the conditions required by law. There is no way for these pages to be omitted on your computer.

  I'll transfer my instructions to uninstall/reinstall of the printer.

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-79356-2&cc=us&DLC=en&LC=en&OS=4063&product=3643617&sw_lang=

  Install and let me know the result!

• Windows Mobile Device Center 6.1 will synchronize is more on mobile

  Hello

  I'm having a problem, try to synchronize the different features of WIndows Mobile with my PC.  I have WMDC 6.1 installed on a WIndows 7 64-bit machine.  When I place a device in its cradle, WMDC returns an error "FAILED.  Windows Mobile device - this device cannot start code 10 ".
  On the device, I see a message "Connect to USB - authenticated user" but cannot connect to my PC.

  I tried this on a clean install of PC (Windows 7) with no updates of windows and it works fine.  Everyone comes through this?  Any idea what windows update breaks my sync?

  Thank you
  FrancoCSP

  Hello

  1. is specific to this particular device question?

  2 have you made any changes to the computer, before the show?

   
  Method 1:
   
  Run the fixit available at the following link.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us?EntryPoint=lightbox
   
  Method 2:
   
  Uninstall and reinstall the USB controllers.
   
  a. click Start, in the search box, type in devmgmt.msc and press ENTER.
  b. Locate the USB controllers, right click on each one of it and select Uninstall.
  c. once has an option remove drivers
  d. restart the computer.
   
  After the computer restarts, Windows will automatically install the drivers.
   
  Method 3:
   
  Since you are able to connect the device when no windows update is installed, I suggest you to check the update causes this problem.
   
  Step 1: Perform a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.
   
  Step 2: Install an update at a time and check the status after each installation.
   
  See also,
   
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

• SQL Server 2005 unattended install using the script fails on Windows 2003 Cluster

  We strive to perform the installation without SQL Server 2005 via the script assistance, but the installation fails on Windows 2003 Cluster, we use Windows 2008 with HyperV running a DC with two nodes (all Win 2003). Script is...

  Start/wait setup.exe/qb VS = INSTALLVS SQLTEST = SQL_Engine INSTANCENAME = SQL123 ADDLOCAL = SQL_Engine ADDNODE = sqlnode-1, sqlnode-2 GROUP = SQL1 IP = 192.168.1.85, SQLNetwork ADMINPASSWORD = Windows8! SAPWD = Windows8! INSTALLSQLDIR=%ProgramFiles%\Microsoft SQL Server\ INSTALLSQLDATADIR = G:\SQLDATADIR\ SQLACCOUNT = SQLPASSWORD lab\sql_svc = Windows8! AGTACCOUNT = lab\sql_svc = Windows8 AGTPASSWORD! SQLBROWSERACCOUNT = SQLBROWSERPASSWORD = Windows8 lab\sql_svc! SQLCLUSTERGROUP = "lab\sql_grp" AGTCLUSTERGROUP = "lab\sql_grp" FTSCLUSTERGROUP = "lab\sql_grp" ERRORREPORTING = 1 SQMREPORTING = 1 SQLCOLLATION = SQL_Latin1_General_CP1_CI_AS

  Errors on the nodes:

  SQLSetup0008_SQLNODE1_Core (Local)

   Running: InstallSqlAction to the: 4/14/2012 22:56:39

  Installation: sql on target: SQLNODE1

  Waiting for remote setup (s) to prepare

  Remote Setup (s) is ready

  Problem of determining the State of the virtual server for the package: '1' because of the exception of data store:

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 63

  ----------------------------------------------------------

  Could not find the property 'VsDataPath' {'PackageIdStateScope', ' ', '1'} in the cache.

  Source the name of the file: datastore\packageidstatescopecollector.cpp

  Compiler timestamp: Wed Aug 24 13:40:04 2005

  Function name: PackageIdStateScopeCollector::collectProperty

  The source line number: 115

  ----------------------------------------------------------

  dataPathValue is empty

  Cluster functionality detected: SQL_Engine

  Loaded DLL:C:\Program SQL Server\90\Setup Bootstrap\sqlsval.dll Version: 2005.90.1399.0

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 130

  ----------------------------------------------------------

  Unable to find property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"} in the cache

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: VirtualServerInfo.IPResources

  The source line number: 113

  ----------------------------------------------------------

  Could not collect the property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"}

  Transact package threw an exception.

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  Package first notify: 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  SQLSetup0008_SQLNODE2_Core (Local)

   

  Local configuration can complement

  Running: InstallSqlAction at: 4/2012/14 23:23:57

  Installation: sql on target: SQLNODE2

  Informs the package is ready to start: 0

  Waiting for notification start installation

  Local configuration can begin installation

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: remotepackageengine\remotepackageinstallersynch.cpp

  Compiler timestamp: Wed Aug 24 13:40:17 2005

  Function name: sqls::RemotePackageInstallerSynch:preInstall

  The source line number: 128

  ---- Context -----------------------------------------------

  SQLs::InstallPackageAction: perform

  SQLs::RemotePackageInstallerSynch:preInstall

  Abandonment of the package: "sql", due to an error from the configuration of the host: 13

  Notify all ready to commit: 13

  Notify all ready to put end to: 13

  Waiting for notification complete installation

  Local configuration can complement

  Packaging return code: 13

  Complete: InstallSqlAction at: 4/2012/14 23:23:59, returned false

  Error: The 'InstallSqlAction' Action failed during execution.  Error during execution information:

  Target collection includes the local machine.

  -----------------------------------------------

  Error: The 'UninstallForRS2000Action' Action failed during execution.  Error during execution information:

  Action: "UninstallForRS2000Action" will be marked as failed due to the following condition:

  The condition 'rs has been correctly upgraded level.' returned false.

  Package installation: 'patchRS2000' failed due to a precondition.

  Running: ReportChainingResults at: 4/2012/14 23:24:1

  Error: Action "ReportChainingResults" threw an exception during execution.

  One or more packages could not be installed. See logs for details of the error. : 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\sqlchainingactions.cpp

  Compiler timestamp: 1 Thu Sep 22:23:05 2005

  Name of the function: sqls::ReportChainingResults: perform

  The source line number: 3097

  Please notify.

  Assani

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  Hope this information helps.

• How to install XP SP3 when installation fails repeatedly?

  Have tried to install SP3 and failed repeatedly. The installation is not complete. Does not seem to matter in the way everything went, so I don't care. However, to have just spent 2 days trying to install McAfee Antivirus Pluss 2011, of which 4 chat sessions and session 1 phone with McAfee representatives, only to discover that my machine must be updated tp SP3. Help.

  Start here:

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  FYI

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• BT Stack installation fails during the installation of device driver - Satellite R830 Windows 7

  I have a Toshiba Satellite Pro R830 x 64 with Windows 7.

  Recently, I downloaded new Bluetooth drivers from the Toshiba website support for this laptop and tried to install.
  The Bluetooth software is installed but the driver (RFBUS) installation fails with the message "Bluetooth RFBUS driver was not installed successfully".

  I don't understand how the Toshiba Setup program cannot recognize Toshiba hardware.
  As a user deaf that I used successfully the function of Bluetooth with my hearing aids to make Skype calls, now whole Bluetooth function is completely non-functional because of failure battery BT driver install.

  I tried to uninstall and reinstall several times but still get the same message

  Help, what do I do to fix this?

  File downloaded to install the site Web of Toshiba's v80012_T20110809_x64 as dated 18/08/2011 11.53

  Hello

  A question: could you please post you completely portable model number?
  I'm not quite sure of this model laptop but most of the portable m press a combo of WLan/BT card. This means that a single module shares WiFi and BT connectivity.

  In this case its need to install an additional driver like BT filter driver package, but this depends on the module that is installed in the unit.

  However, I m wondering why try you to install/upgrade to update this BT stack if it worked correctly in the past