Repair installation fails on Windows 7 and get black screen

Similar Questions

• renamed authui.dll and get black screen

  Hi, last night I tried to make a customization of my computer, browsing the internet I found a bootlogon authui.dll from a trusted site. After taking possession of the original file and rename it to authui.dll.backup I could not make any change or copy a new to the system 32 folder. Once I restarted my pc to try to fix it by going into safe mode but the back is going in any mode the vista loading bar appears but then I get a black screen with the cursor and I don't get logons or whatever it is, keep it just like that. so is it possible to fix this or get a window command prompt in the start menu so I can rename my file in normal.i will be really grateful for your response. Sorry for my English

  Hello

  Have you tried selecting mode safe mode with command prompt from the start menu? Otherwise, you could try to load the Recovery Console by starting with your Vista disc. (If you do not, see:http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/). From there a system restore can also be a solution.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Windows 10 iMac 27 "el capitian Boot camp Installer could not move forward and the black screen appeared

  I have an iMac 27 "end 2015, el Capitian, boot camp 6.0. 10 64-bit pro Windows, everything goes fine until the last step when the Boot Camp Installer appeared, when I click Next, the screen is black... tried new facility twice, still stuck in the last step with the Boot Camp Installer then click Next, the screen become black... Please help!

  Some at Microsoft should lose their job (s) on that moment this crass brain freeze. Please remove the current installation of Windows, re-run BCA and create a new partition and you disconnect from the Internet before Windows Setup ask you where you want to install Windows.

  Please see installation problem w / 10 Windows on end 2015 27 "iMac retina as a reference.

• Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) during the validation in an IE specific forum or a newsgroup. Please do it in your next reply.

  By "The Internet began" do you mean that you encounter errors Page can not be displayed ?

  Updates have you installed just before this problem started? Have you installed an update of the third-party driver that is offered by Windows Update?

  TIP: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get an installation failed for photoshop, illustrator and caused - payload: package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}---ERREUR: third party useful Installer revealed

  I get an installation failed for photoshop, illustrator and caused - payload: package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}---ERREUR: third payload Installer vcredist_x64.exe failed with exit code: ERROR-2147024546: cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\randy\AppData\Local\Temp\{2246675D-5215-4CA7-BE30-569ED38C5D9B}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com

  Go to control panel > programs > program and features.

  under programs and features, look for the option "Microsoft Visual C++ Redistributable Package (x 64) 2012" and do a right click on it and uninstall it.

  If you are prompted, restart, and then uninstall.

  Once you had uninstalled package redistributable Microsoft Visual C++ 2012 (x 64).

  Click on the link below and the new download Package redistributable Microsoft Visual C++ 2012 (x 64) (vcredist (x 64) .exe file and install the same):

  http://download.Microsoft.com/download/1/6/B/16B06F60-3B20-4FF2-B699-5E9B7962F9AE/VSU_4/VC redist_x64.exe

  Once you had installed successfully Vcredist_x64.exe, desktop application Cloud Creative throw and try to install the CC apps.

  Let me know if you need more assistance.

• Just did my laptop, tried to do windows updates and get a message T "here has been a problem the site witt" and can not open the page I requested at this time.

  Just, I redid my laptop using my system recovery disks. I went to windows update and get this msg when I click on Express.com: the site has encountered a problem and cannot display the page you are trying to view.

  Original title: I redid all my laptop. I went to windows update and get a message that says: there was a problem witht the site and I wanted that the pag can not open the page I have requessted at this time.

  You must download and install Windows XP Service Pack 2 (if not already installed) followed in Windows XP Service Pack 3.  You will find two of them at http://www.microsoft.com/downloads - download the "Network Installation Package" for the two and ignore the part about them being only for the professionals - the parcel I recommend you download will install with or without network connection.

• I am trying to install Windows Update and get 800F080D for IE9. Why?

  I am trying to install Windows Update and get 800F080D for IE9.  Why?

  Hi KevinMiller

  
  1. don't you get the error only during the installation of internet explorer 9?
  2. when exactly you get the error message?
  3. that you get an error when installing other windows updates?

  I suggest you to check if you have all the prerequisites installed for internet explorer 9.

  http://support.Microsoft.com/kb/2399238

  
  Refer also to the links below and check if you did all requirements before installing internet explorer 9.
  http://support.Microsoft.com/kb/2409098

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

   

  I hope this helps.

• Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

  Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

  Now just got a new error code: 6 to 8.

  The updates, I can't update (!) are:

  1. SQL Server 2005 Express Edition Service Pack 4
  2. Update of security for MSOffice 2007 System
  3. Update for MS 2007 Office system
  4. Update for MSOffice Outlook 2007 Junk email filter

  Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

  Thanks in advance

  Sharon

  original title: error codes: 6-8 and 80070641

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Trying to connect Samsung Galaxy SII to Windows 7 and get an error.

  Try to connect to Windows 7 and get an error.

  Original title: Samsung Galaxy SII

  Try to connect to Windows 7 and get an error.

  below the software must be installed to connect your phone to samsung for windows
  http://www.Samsung.com/UK/support/usefulsoftware/Kies/JSP

  If you have already installed this software, it is recommended to contact Samsung support
  http://www.Samsung.com/us/support/

  If you have problems with the usb, visit
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not.

  Black screen in Windows Media Center during the TV

  When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not. Any fix for it?

  TV works on the other program I have and has been workign on MC last week, but now I don't?

  Some success with this issue (its OK, but BLACK) video for live/recorded TV

  ' 1) ' disabled ' tuner card (Ati HD 650 PCIe) TV [via right click] in the Device Manager
  (2) restart Win7 64-bit
  (3) Win7 located & reinstalled the drivers
  (4) VOILA!   Real video and audio live & recorded TV

  BTW - before above fix in Device Manager:
  Notice anything in his video & Game Controllers
  'Properties' reported 'this device is functioning.
  "Update drivers" reported "... software driver...»
  ... and no updates of WMC anywhere in sight

  Go figure!

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Why my computer off and get blue screens

  Why my computer off and get blue screens once from time to time. My hard drive sounds like he works hard. I can hear it ticking sweet sounds when I start the computer, and it takes a while to calm down.

  Ron

  Hi Ron,

  I suggest you to follow the steps mentioned below and give us the blue screen error message.

  1. click on Start and then click on Panel.

  2. click system and Maintenance , and then click System.

  3. click on Advanced system settings.

  If you are prompted for an administrator password or a confirmation, type the password or click on allow.

  4. click on the tab Advanced and then click settings under Startup and recovery.

  5. to the failure of the system, click on to erase automatically restart checkbox.

  6. click OK and then click ok.

  7. try to reproduce the error.

  Reference:

  How to fix error Bluescreen (STOP) that causes Windows Vista to shut down or restart unexpectedly.

  http://support.Microsoft.com/kb/958233

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• HP t510 and t5565z black screen

  Hello

  I have several HP t510 and t5565z thin using HP Smart Client OS we use for VMware View customers. Thin clients for very well most of the time. However occasionally they will get black screens and no longer respond. I would say that this probably occurs during long periods of inactivity may be several hours or more. Has anyone already experienced this? It can occur during a session connected or simply sitting lit all night.

  These thin clients also seem to have a kind of construction in both screen saver. Because they will go in this black screen after 15 minutes of inactivity. They return generally, but I can't find anywhere in the settings options or BIOS to kill this screensaver.

  To anyone reading this, I found a solution. I found myself by opening a ticket with HP about the sleep function screen integrated with Smart Zero Client generation. I was information this feature was not available without the component of profile manager of the HP Server deployment, you can use this thin client.

  I finished the switch back on the ThinPro build because you can control the screen saver and display the power options in the generation of HP. I had a feature request to HP to allow the screen saver and power display options to be greeted with the Smart customer zero built in the future because they added an Admin mode in the last generation, they pulled out for us who do not have enough of them to justify the use of the server component.

• Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Bring her back. It's new, it's at the shop for sorting or replace it, not you to try to fix it.