installation in different computers

Similar Questions

• Win XP Pro installation on different computers

  I have some old programs that must be run on win xp pro. I just bought a brand new version of win xp pro sp3. I load it on my old computer that runs the home edition of vista. So I bought a new hard drive and I'll take the win xp pro. When this computer goes out, can I reload this same copy of win xp pro on a new computer? I have problems with activation? What is the best solution if I want to use win xp pro as long as possible?

  "When this computer goes out, can q. I reload this same copy of Win XP Pro on a new computer?"

  A. only if the Windows XP Pro version is a "detail" and not an "OEM" version

• Adobe Photoshop Lightroom Installation on different computers

  I bought Adobe Photoshop Lightroom several years, but my computer crashed recently and I was wondering if there was a way I could have the program installed on my new computer without having to buy it again.

  You can download, install and activate using the serial number, you should already have the initial purchase.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Installation and use of the different software on different computers to Master collection at the same time

  Question:

  If I buy the "Adobe Creative Suite 6 Master Collection,"

  Can I install and use different software on different computers at the same time?

  example:

  Can I use photoshop cs6 on 1 machine

  and then illustrator cs6 on machine 2

  and then indesign cs6 on machine 3

  simultaneous all?

  Thank you

  # It is not possible. You have 2 activations that are valid for all applications and that's all. Read the EULA

  Mylenium

• I had problems to install Vista SP1 on different computers 2 Scared of Vista SP1.

  I had problems installing Vista SP1 on 2 different computers and have had to reinstall OS and at the same time, after the reinstallation of Vista, Windows update has updated all the updates up to SP1 and I'm afraid to click on it.  I just finished rebuilding my laptop and all important updates and stopped at SP1.  I ran the System Readiness tool update on my desktop and am really GUN-SHY click on SP1.  Is there something else I can look for or take into account before clicking GO?  I was really upset when the laptop was working fine without it and against my instinct clicked on install when Windows update finally offered it.  I was surprised, that he had not come forward.  I have HP Pavilion, AVG and it is on both machines.   On the desktop I had updated SP1 when it first came out, and something zapped my video card and had to install a video card to see what was going on.  Finally I had to buy another HP motherboard.  It was not cheap.  I'm really scared to click on install. And I would like to put into practice what I preach to end-users, but experience twice shot dark me and path of restoration.  Thank you.

  I'm back - I'M MY technician.  I support experience dating back to the beginning of the 1990s.  I tried your advice and humiliated.  What I have to lose - I said. If this does not work, I'll reformat and start over.   here goes.

  I reformatted, reinstalled OEM in new condition.  Bypassed the Code Purple HP tattoos on their generation, where we replaced the MB that I had.
  Uninstalled Norton, installed the Norton remover.
  Installed MS Security essentials.   Yet once, I said why not.  try it.
  Installed all the updates that Microsoft had to offer.   Have to him. I said.
  It took almost two days.
  System has all updates included SP1 and SP and anything withdrew automatic update of Ms.
  Ok.
  browser, flash, drivers, software for personal use
  System is being run-
  Scanned primary and any secondary t.o.d. after reconnecting them - disconnected for the reformat.

  There are other questions which seem to me with ISP but I meet with them, or open a new question.  For now, Vista SP1 and 2 are in.

  Oh and if anyone has a HP, which gets a code purple error after entering the process of restoration - Shift and F10 while the purple error code is on the screen and rename files from HP in the form of command prompt to convey this purple code and continue with the installation.  I had to find this info on the site of HP after the first reformat.

  and another thing.  I had to take my firewall router a notch to allow download of the Norton removal tool.  Why they still use FTP for one simple download is beyond me.  -

  Nice day

• You can use the x 86 version and the x 64 version on two different computers

  I have a key/installation of Windows 7, which can be used for installing the x 86 version or the x 64 version. Could I use the x 86 version and the x 64 version on two different computers?

  Hi hgcxngv,

  No - not at the same time.  A key is an installation by the license agreement (regardless of the size of bits).   Is excluding the special manufacturer or license multiple keys which normally applies to companies and I am sure that you would know if you had a since they would cost much more to buy and were more difficult to obtain (if you remember).

  You can install by using 32 bit on a computer and then uninstall it from this computer and install the 64-bit on the other or vice versa (although you'll probably need to use the help of phone to activate the second time since the automated process will most likely perceive it as an attempt to both facilities and reject and you will need manual for past this problem).

  The foregoing does not apply to OEM licenses that cannot be installed on computers with they came, live and die with this computer (even if the key would have worked on each version, perhaps in order to simplify things for the manufacturer).

  I hope this helps.

  Good luck!

  Kosh

• I want to know if I can use creative cloud with the same account on different computers

  I want to know if I can use creative cloud with the same account on different computers, because my children want to she and I have known if I buy when I can use it on several computers at the same time

  If it is the individual subscription, you can activate on 2 computers only.

  However, there is no limit for installation, but you can connect and activate on 2 computers only.

  If you had already signed and activated CC apps on 2 computers, and there still if you want to activate on a 3' rd computer, you can simply disconnect one of the 2 comps, so that you can keep counties of activation.

  For more information, see the link below:

  https://www.Adobe.com/content/dotcom/IE/products/creativecloud/FAQ.html

• If you have CC on two different computers and you forget to sign out how do you use CC on the second computer?

  If you have CC installed on two different computers and you forget to sign out how do you use CC on the second computer?

  Please see this link for more information on the installation of creative cloud on multiple computers:

  FAQ: Can I install Creative Cloud on several computers?

• I have Thunderbird on 3 different computers, all connection on the same e-mail account, but they do not always appear to be in harmony

  Access my account of personal e-mail with Thunderbird 3 different computers/smart devices. They do not seem to be in harmony. For example, I have deleted hundreds of emails from one of my computers, but they still came into my account from one of the other computers. Maybe I don't understand how parameters work?

  IMAP only multiple devices to synchronize because it is based on the server. POP only downloads the messages from the Inbox to the server and stores them on the local disk. There is no communication to the server on the deletion of messages.
  You should learn the differences between POP and IMAP to decide what works best for you.

• Can I synchronize the counters on two different computers in the C API?

  I installed the M-series cards (6254) in several computers. I would like to synchronize the counters for each card.  The best way that I came with to do this was to have the counter on each counter entries read a common external clock signal running at 10 KHz I have would then feed a second signal to each card and trigger the task that runs each counter starts when the second line goes high.

  Following the examples provided with the C API, it was easy to get each card KHz signal and then to match the beginning of the counter that I tried to read

  DAQmxCfgDigEdgeStartTrig (taskHandle, inputLineStr, DAQmx_Val_Rising);

  However, this did not work and gave me the following error:

  DAQmx error: the specified property is not supported by the device or is not applicable to the task.
  
  Property: DAQmx_StartTrig_Type
  
  Task name: task
  State code:-200452
  
  End of the program, press the Enter key to exit
  
  

  I know it's very simple sync the cards within a computer using the RTSI interface, but it is not possible that my cards have to reside in different computers.

  It is even possible to synchronize the counters on computers, and if yes how can I do it with the C API?

  ------------------

  Here's what I've written so far:

  
  
  
  
  #define DAQmxErrChk (functionCall) if (DAQmxFailed (error = (functionCall))) goto error; on the other
  int main (void)
  
  {
  
          int         error = 0;
  
          TaskHandle  taskHandle = 0;
  
          uInt32      data = 0;
  
          tank        errBuff [2048] = {'\0'};
  DAQmxErrChk (DAQmxCreateTask ("task", & taskHandle));
  
          DAQmxErrChk (DAQmxCreateCICountEdgesChan(taskHandle,"/Dev1/ctr0","",DAQmx_Val_Rising,0,DAQmx_Val_CountUp));
  
          DAQmxErrChk (DAQmxConnectTerms ("/ 10MhzRefClock/Dev1", "/ PFI8/Dev1", DAQmx_Val_DoNotInvertPolarity));
  
          DAQmxErrChk (DAQmxCfgDigEdgeStartTrig(taskHandle,"/Dev1/PFI14",DAQmx_Val_Rising));
  DAQmxErrChk (DAQmxStartTask (taskHandle));
  printf ("without interruption of the poll. Press Ctrl + C to interrupt\n");
  
          While {} (1)
  
                  DAQmxErrChk (DAQmxReadCounterScalarU32(taskHandle,10.0,&data,));
  
                  printf ("\rCount: %u", data);
  
                  fflush (stdout);
  
         	}
  
  Error:
  
          puts("");
  
          If (DAQmxFailed (error))
  
                  DAQmxGetExtendedErrorInfo (errBuff, 2048);
  
          If (taskHandle! = 0) {}
  
                  /*********************************************/
  
                  Stop DAQmx code
  
                  /*********************************************/
  
                  DAQmxStopTask (taskHandle);
  
                  DAQmxClearTask (taskHandle);
  
          }
  
          If (DAQmxFailed (error))
  
                  printf ("error DAQmx: %s\n",errBuff); ")
  
          printf ("end of the program, press the Enter key to quit\n");
  
          GetChar ();
  
          return 0;
  
  }
  
  

  Hi neurostu,

  Arms start triggers are disabled by default, so they do not have a default PFI line.

  You will need to set some properties DAQmx to configure a trigger for start of arms. Try adding between DAQmxCreateCICountEdgesChan() and DAQmxStartTask():

  DAQmxSetArmStartTrigType (taskHandle, DAQmx_Val_DigEdge);

  DAQmxSetDigEdgeArmStartTrigSrc (taskHandle, "/ Dev1/PFI14" ');

  DAQmxSetDigEdgeArmStartTrigEdge (taskHandle, DAQmx_Val_Rising);

  You have the file "help NOR-DAQmx C reference"? It should contain descriptions of the trigger > more > arm Start properties.

  Brad

• LabVIEW move things on different computers block diagram

  We have a site here license to my work, and I use several computers to develop and deploy our test code. However, I discovered that between computers, often things move on the block diagram simply by opening them on different computers. Mainly text fields. We have some text fields next to rows of a table of block diagram that are alliged with the lines of table on a single computer, while the same without code change when opened on another PC, all text fields are compressed vertically so that they no longer align with the rows of the table. This could be the cause, and is it possible to fix it?

  Thanks for the replies. It is the size of the police which was the issue. However, although I have tried to change the default Application font size (by the "default font" settings of "modification of the characteristics of text") to match the computers that had "correctly" it was not solved the problem. I finally realized that I had to change the police system from the Options > environment > fonts > menu fonts application of the front screen of "Open/create", then completely restart LabVIEW. Problem solved.

• Transfer email from Outlook Express to Outlook 2007 on different computers

  I have a desktop computer with Windows XP Home Edition and Outlook Express as my email product.  I recently bought a new laptop which has Windows Vista and Outlook 2007.  The hope of transferring e-mail messages from my old computer to the new.  I have not been able to get these machines to communicate over a network so hoped there was a way to export the Outlook Express e-mail (perhaps to one. PST file?) and then import that file into Outlook 2007.  Any information that anyone has would be greatly appreciated.   Thank you very much!

  I have a desktop computer with Windows XP Home Edition and Outlook Express as my email product.  I recently bought a new laptop which has Windows Vista and Outlook 2007.  The hope of transferring e-mail messages from my old computer to the new.  I have not been able to get these machines to communicate over a network so hoped there was a way to export the Outlook Express e-mail (perhaps to one. PST file?) and then import that file into Outlook 2007.  Any information that anyone has would be greatly appreciated.   Thank you very much!

  Here is the link to help you. Scroll down and choose "When Outlook and Outlook Express are installed on different computers"
  http://Office.Microsoft.com/en-us/Outlook/HA010943871033.aspx

  t-4-2

• Cannot close a session on 2 different computers

  Hi all, I took a CD of a choir of school, my daughter is in her school. The teacher recorded them & gave the children a CD. However parents couldn't play (30 CD & 3 hours of burning!). When I checked the CD on my computer the session had not closed the songs were there in a directory & I could only play on my computer by going into the sub directory. He didn't finalize or close on the menu that I could click. I was lent the master copy which looked OK & was playable as a normal CD & songs on top of the CD, cda files do? I burned the album to the library then ripped the CD - R disc. The disc is ejected after the meeting, but I had the same problem with CD player & the session did not close on my CD that I burned either. I clicked on properties of the CD player & the box has been checked to log off. I tried another CD of my library burned & I could play on the CD player... strange. I tried the choir & the same thing. I could not read it on a CD player. If I remember the memory I usually get asked if I want to finalize the CD when recording is finished. Again not to finalize or close a menu, I could see.

  I then decided to see if I could rip the CD to a playlist that i Tunes so see if it works & that finalized & closed OK & could read the CD in a CD player. What seems to be the case on 2 different computers? I don't know what version of Windows Media, the school's computer runs but mine is the 64-bit version of VIsta with the latest version of Media Player.
  Look forward to any thoughts on this... See you soon... David

  Thank you for that.

  I just got home & loged on my computer. I checked my library & files was torn off as files wma & titles numbered 1 to 23 artist unknown, because it is a choir from the local school. I have insterted the disc that I threw in the trash as it partially written for her. I opened Windows Media Player & move the files on the CD, but he asked me for a blank disc & not go.

  I then opened windows Explorer & could drag & burn that way on the disc. Is that mean that the original CD was recorded as a cd data & not playable as DC music? As in the Explorer Windows Media not? Or in the form of wma files that can be read in computers & cars with wma players?

  I now ejected the CD & the computer "says please wait so it can be used & complete on other computers. He did not originally when I was burning the disc.
  I tried on the my Sony Music center. It read the disc but only displayed 3 tracks, but would not play. They are wma files. I can read it on my car CD player that can play WMA discs. I think the fact is that the original disc has been saved as wma files & maybe I Tunes ripped it converted to MP4 & engraved on the disk in the form of music files that can be played on a conventional CD player. When it was initially torn, or when I did it I should have selected a format to burn different although I only see wma in the burning options.
  What do you think?

  =============================================
  Good grief... it's complicated.

  If the directory of the CD shows media with extensions like... WMA,
  MP3, etc... It's a data CD.  And Yes... 'some' but certainly not all CD
  Players will recognize these formats. The manual of the CD player will list
  all compatible formats.

  The directory of the CD shows the CDA files... If, in fact, encoded as a
  Audio CD and should be recognized in all CD players with the exception
  of the few who simply will not play any type home made CDs.

  If you start with a new, Virgin CD - R and burn an Audio CD using
  . WMA files... the result (assuming your burner working properly) will be
  play in addition to all the readers of CD and it is one that you could use to
  make the copies with ImgBurn

  The real advantage to create an ISO is that each subsequent copy
  doesn't have to be re-encoded and drives only burn faster
  but will be more consistent.

  I feel like I'm just going around in circles rehash old news so that
  is about all I can offer.

  Good luck with your project.

• I recently bought a new computer and sold my old to my friend, I remember hearing that a product key worked on three different computers, so I don't bother with buying a new on

  I recently bought a new computer and sold my old to my friend, I remember hearing that a product key worked on three different computers so I don't bother with the purchase of a new, but now I can not even use my old and now my functions have stopped working.

  Please advise me what to do, a new product costs about £79.00 which is a joke, I already have an and I seriously remember reading that you can use the key on one to three different computers.
  Thank you.

  Premium family Edition and it is not OEM.

  If this is the license of Windows 7 Home Premium box you bought, then its a license only.

  If this is the license of Windows 7 Home Premium orange box you bought, then its three licenses.

• have two different computers and have problems recoving from hybernation. Locking the system

  Original title: recovery of hybernation

  I have two different computers MS 7 and have all two issues recoving from hybernation. They lock just straight up (do not accept an entry mouse or keyboard) and requir3e hard re boot. Goes 8 to 10 times a week.

  Hello

  (1) did you of recent changes to the computer before the show?

  (2) is the specific question at the opening of specific applications or programs?

  (3) you get an error message?

  You can perform the following methods and check if it helps.

  Method 1: Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286

  2 the resolution of the problems of method Performance

  Run the troubleshooter of performance, then check if it helps.

  Check out the link: http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter

  Method3:How to troubleshoot performance problems with sleep, hibernation and resume:

  http://support.Microsoft.com/kb/950686

  Note: The article remains valid for Windows 7 also if it is for Vista.

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 4: update video drivers card

  Check if the video card drivers are up to date. Install the latest video card drivers for Windows 7 on the manufacturer's Web site.

  Tips for solving common driver problems:

   http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  It will be useful.