Win XP Pro installation on different computers

Similar Questions

• ADOBE ACROBAT 8 Pro Upgrdade / WIN 7 Pro INSTALLATION

  I replace my computer from Windows XP pro to Windows 7 pro. To install Acrobat 8 Pro (that thing a license upgrade) I should install step by step the following software: Adobe Acrobat 6 Std > Adobe 7 Pro > Adobe Pro 8. This does not work with Win 7 Pro?

  Concerning

  Hi B M I,

  Adobe Acrobat 8 Pro is not compatible with Windows 7. I've seen cases where the installation goes very well. And with workaround solutions, you can get Adobe installed PDF printer as well. But Adobe always discouraged to use Acrobat 8 on Windows 7. Why Acrobat 8 is not compatible because the code of Acrobat 8 has not been tested on Windows 7 and it is not fully optimized for Windows 7.

• installation in different computers

  Please, I want to buy the creative cloud but I need to know if buy the package, I have programs installed on two different computers. IDs how clouds allowed Creative I use? Thank you

  You can install on an unlimited number of computers, but you can turn on up to two computers at the same time.

  Just install the desktop application cc on the computers that you want, CC help | Creative cloud desktop

• How can I install Premiere Pro on 2 different computers with on get a trial version on one?

  I installed creative cloud on my two computers and I have the CC version on my desk and wants to get on my laptop, I installed it on my laptop but it says trial version?

  Hi davidw41677605,

  First of all, make sure that you are connected with the same Adobe ID on both machines.

  This problem may also occur due to problem of license on your computer. In this case, please refer to this document and follow the steps under reset license information

  Thank you

  Regalo

• Satellite A110-906 - Win XP Pro Installation does not work properly

  Dear all, good day!

  I bought a new laptop model Toshiba Satilite A110-906. I want to install windows XP Professional with my CD under license, but I get error after installing copyiny files.
  The error is blue appear with hardware problem.
  PCI.sys error
  When I install Vista, it works fine.
  Any help will be much appreciated!
  Thanks in advance

  Raja

  Don't forget that your original CD of Microsoft Windows contains all the hotfixes and service packs 1 and 2.
  You can use a "nLite" application to create this CD with all updates

• Adobe Photoshop Lightroom Installation on different computers

  I bought Adobe Photoshop Lightroom several years, but my computer crashed recently and I was wondering if there was a way I could have the program installed on my new computer without having to buy it again.

  You can download, install and activate using the serial number, you should already have the initial purchase.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Upgrade. Win 7 Pro to win 10 hangs at 62...

  Please Heeelp!

  I am upgrading to Windows 7 Pro to win 10, but my machine (like many others it seems), is stuck at 62% (transfer of files, settings, and programs).

  First of all, I can safely return to my Win 7 Pro installation?

  Secondly, how can I get beyond the point of blocking of 62% and successfully upgrade to win. 10?

  Thank you all,

  Geoff

  Installation fails or becomes inadmissible at some point during the installation of 18%, 62%, Migration, pilot with the settings.

  Turn off the computer. Wait 10 minutes. Start the computer. The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows. Launch the prompt with administrator privileges. Click Start, type: cmd Right-click on CMD, and then click Run as administrator Type the following command: Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN Press enter on your keyboard Exit command prompt Restart Try to update again. Method 1: Run Windows Update to convenience store and check if it helps: Click Start Type: Troubleshooting . Under System and securityclick on will correct the problems Windows updates.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Wise Blackjack who worked on Win 95, Win XP Pro. Win 7 says its installer is not compatible and will not open it.

  I installed this on many machines from Win 95. I now running on several machines of Win XP Pro SP3.
  INSTALLATION of Sage BJ. EXE has a creation Date of the Sep 1998 05, size 24 KB. I tried every compatibility mode selection, WinXP SP3 via Win 95 - Win 7 don't like him for any of them. So I can't even at first base to install it now.
  Research online, I can't find clues for newer versions.
  It would seem that, if it was "mission critical", I will follow a path to upgrade to Windows 7 Pro, so that I can install it "Win XP Mode". Maybe need arises for some other software, but not for running a game.

  The program was designed there is an earlier version of win years, cannot as such that it is supposed to operate an o/s, win7, what is fundimentally different from earlier versions of victory, even in compatibility modes.

  Maybe that is a 16-bit program, and you are using a version of win7 64-bit?

  Even the installation of Virtualwinxp is no guarantee it will install

• Installation of Acrobat Std CD (Newegg) DC [Win 7 Pro OS w / 8 GB ram], received a pop-up "this application cannot be installed on this operating system.  The installation program will end now... "Do I have a faulty disk?

  INSTALLATION IS COMPLETE; claiming the wrong OS.  My computers a Win 7 Pro, w / 8 GB ram and searched 1 TB HD.

  What Miss me?

  Solution...

  Copied all files in a folder on my machine & run 'install' from there.

  Wish that the experts knew it!

• Qosmio F20-141 - cannot start the installation of Win XP PRO SP2.

  Failed to start installation of Win XP PRO SP2.

  After click on "Start of the CD" I can see for a short time only from message ~ "Install from XP Wisdows" (small white letters at the top of the black screen)

  After this computer hungs in black screen.

  QOSMIO F20-141 for the Federation of Russia
  M/N: PQF20E-02801YRU

  Hello

  Have you used the Toshiba Recovery CD or did you install the operating system from the original CD of Win XP?
  As far as I know the recovery procedure is very easy to use and it should work without any problems.

  Good bye

• Installation of Boot Camp utility stopped working after that Win 10 Pro was made.  Installer got stuck on step 'realtek' audio  I restarted Windows, but Boot Camp does not resume or restart the Windows installation process-side utilities?

  How can I get the Boot Camp utility to install entirely in Win 10 Pro?  After winning 10 Pro was finished installing, the installation of Boot Camp process began but eventually got stuck at halfway through (for 20 minutes) on stage 'Realtek Audio.   A restart of Windows has not triggered a recovery or re-starting installation of the Boot Camp utility.  Windows, it works, but I have no utilities 'Boot Camp' and can not find any Boot Camp file stored on the side of Windows again.

  Please see Bootcamp 6.0 driver install interrupted for resolution.

• Cannot run my installation of Win Xp Pro Cd

  Cannot run Setup from the cd that ORIGINALLY installed win xp pro on my machine because it says that the version on my computer is newer than the Conference on disarmament, well well the only reason I can think of, is that the updates have made the more recent than the original pc version can someone help,

  QUESTION; How to run the Setup program when I get this message please.

  In order to run the Setup program to reinstall windows, put the disc into your computer and start to it, which will give the classical configuration of BACK blue screen and after you format your drive, and windows installs the first part, you will need to return to the mode of windows.

• Update Windows not finding updates/East remained after fresh installation of win 7 pro on the laptop of dell d610 32bits.

  Hello

  I have recently re - installed win 7 pro on a 32-bit computer laptop dell d610 and after installing some updates it now just says: "check for updates...". "on the windows update screen and the green light just continues to go everywhere for centuries if I leave.

  I have also no wireless connection just a wireframe.

  I've added a certain drivers from the dell website including an update of the BIOS.

  When Windows 7 was installed it has 4 drivers problems / missing in the Device Manager and since the update of dell, there are now 2 problems with

  Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family and the controller of the network if I thought I had added the driver for this.

  I tried to use them, but they make no difference:

  WindowsUpdateAgent-7, 6 - x 86 (I also tried to install an equivalent standalone update for it and he says just looking for updates on this computer and also keeps going and going)

  WindowsUpdateDiagnostic

  MicrosoftEasyFix50202

  MicrosoftEasyFix20179.mini

  tweaking .com - reset the registry permissions

  Its a genuine product key as it turned on and I think that sp1 is built in otherwise it wouldn't activate.

  I tried to solve this for a week now without success any help would be really appreciated.

  Thank you very much

  Craig

  Windows Update problem (new)

  The following procedure applies in the case of installation (reinstall) Windows 7.  It does not apply to a usual, normal day.

  I'm afraid that you will do the reinstall again.  Not a terrible penalty to pay.  Usually takes less than an hour.  Then immediately proceed to the next procedure.   It's strange, but it really does work and many people have proved it.

  NEVER install anything other than Windows updates until your system is up-to-date.  Once you have the list update, install all together.  Installation of updates in batches is not expedite the process or do better.

  1. Before you begin to re - install, download (32 or 64 bit) KB3083710 and KB3102810 in advance and store on a USB
  2. Start and end the re - install Windows 7 SP1
  3. Before that the newly installed system can go online for the first time, Disconnect the computer from the Internet.  This chronology is essential.
  4. Install KB3083710 and reboot manually.
  5. Install KB3102810 and reboot manually.
  6. Restore the Internet connection, and run Windows Update as usual.
  7. After a few minutes, you should have a lot of updates to download and install.

  Thanks to Ken Morely

• During the installation of Win - xp pro vmware error 10 as mentioned below

  During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

  I think you'd have better luck if you go to the website of VMware support.

  http://www.VMware.com/support.html

• Installation of Win 7 pro on win 7 ultimate

  OK, the first facts:

  My friend has a computer that came with Vista installed.

  Some time before, she had a problem with the computer and brought it to a repairman.

  When she got the computer back everything was in order, but the repairman installed a copy of Win 7 Ultimate instead of Vista.

  Everything went well for a while, but yesterday after an update, Windows 7 has been declared as not authentic.

  She immediately called the guy who told him that it is not surprising that it had installed a pirated copy.

  She now wants to buy a legitimate release of Win 7.

  Now for the questions:

  She does not have the ultimate version of Win 7, Win 7 Pro would be better suited for her. Is it possible to downgrade Win 7 Ultimate to Windows 7 Pro without losing all data on the hard drive?

  In addition, she still the Vista COA at hand. Then it would be possible to just switch to Win 7 Pro without having to reinstall Vista first?

  Hello

  Thank you for contacting Microsoft Community.
  Unfortunately, it is not possible to downgrade directly from Windows 7 Ultimate Windows 7 Professional, without modifying the files. You can not downgrade any Windows like the upgrade. THUS, back up all personal files and other files, and then perform a new installation (will erase the partition and install Windows 7 professional fees). You can then restore the files. Note that installed applications/programs should not be backed up because they can be installed after the installation of Windows.
  This process requires no installation of Windows Vista. But if you plan to upgrade, rather than clean install of Windows 7 Professional, you must install Windows Vista (new installation) first and then proceed to the upgrade.
  Note this upgrade can be made between architectures, i.e., x 86 (32 bit) x 64 (64-bit) or vice versa, even if it's Windows Vista to Windows 7.