Installation just hangs

Similar Questions

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• HP installation wizard hangs in Mavericks (OS 10.9)

  I need a version of the HP installation wizard that doesn't crash in Mavericks, so I can set up my printer with my new router wireless. This printer (HP Officejet Pro 8000 A809) works well with the Mavericks on my old wifi network. But my DSL provider just installed a new router, so I have a new wifi network which also works fine with everything else.

  Now I need a way to set up my printer on the network, because the installation wizard hangs in the Mavericks. Is there an updated version of the installation wizard that works with the Mavericks? I looked, but can't find any info.

  Thanks for any help you can provide.

  Bruce777 solved this problem for me, thanks Bruce! My printer now works perfectly on my new wifi network!

  Bruce instructions, for anyone else having the same issue:

  -delete all printers already implemented

  -Rub old hp software and updated software for the hp 2.8 drivers

  -Unplug the usb cable from the printer if you have connected

  -restore the network printer hpsetup (hold down the power button / stop and press the button x 2 network and then cancel 3 x, release power button).

  -Print the wireless network test report (hold down the button to network and update support 2 x). Check the ssid network name is hsetup

  -arrived in sys prefs > network and change the mac to hpsetup wireless network

  -go to the sys pref > print scanning

  -Add the HP 8000 printer

  -Click the supplies button and options and click on the printer to show Web page

  -Click on the Networking tab > wireless in the left pane > start networking wizard and change the network of hpsetup to your network

  -finishing (this page may freeze.  Close the browser)

  -Return to the sys prefs and change the network wireless to your networt

  -go to the printer and print the wireless network test report (updated 2 x key and press the network button).  Make sure that the SSID is your network

  -go to system prefs > print scan > select your printer > options & supplies > see the printer Web page > network info (check ssid and compare it to the wireless network test report)

  -try to print something on your printer.  It might take a bit of time first impression.

• Problem with the upgrade to version 37.0.1 - update just "hangs".

  I am currently in Firefox 36.0.4 on a Windows 7 Pro computer. I tried twice to move to Firefox 37.0.1 WITHOUT success. Once the software is downloaded and start the upgrade, the upgrade appears just "hang" - nothing happens after 15 minutes, which is much too long to do the upgrade previous updates of Firefox have NEVER took this long and I never had any problem with prerequisites updated to Firefox! My Windows 7 has the latest Microsoft patches. I don't know why this is happening. Any suggestions? For now I give up trying to pass to the 37.0.1 version.

  He just go to www.getfirefox.com, download the new version and install it. All your data will be saved, but you will be running the most recent version.

• I'm upgrading Firefox 20.0 but not automatically connect to the server, just hangs. Why? 19.0.2 States that it is "free" update channels: what is it?

  Regularly alert is displayed to update me to 20.0 but it does not connect to the server - even if I have no problem with the modem at another time. It just hangs there. I thought that Firefox will update automatically. I have topped up, as advised but still 19.0.2. On the message States, I am currently on the channel "update of output". What does that mean? Do I need an update? Why?

  "update of output" means that you are using the stable version of Mozilla Firefox.

  Have you tried to reset firefox and then runs the update to verify that it contains that you are to the latest version?
  https://support.Mozilla.org/en-us/KB/reset-Firefox-easily-fix-most-problems

• Update to Microsoft Silverlight has no 'touch' click to ask him to go ahead and let me just hanging

  My application Sky go tells me that I need to update Silverlight and yet when I try to do so, the updated Silverlight page has no 'touch' click to say to continue and just hang on, I get no other pages appear the leaves or drop-down panels asking me if I want to run or save. Any ideas?

  Hello

  (1) Windows operating system you are using?

  (2) that you get an error message or error code?

  See the link below to download and install the Microsoft Silver Light

  www.Microsoft.com/getSilverlight/

  If you still have questions, you can ask your question in the forums of Microsoft silver light

  http://forums.Silverlight.NET/

  I hope this helps.

• I can't open the app store. When I click on it it just hangs then closes its doors. What can I make it work?

  I can't open the app store. When I click on it it just hangs then closes its doors. What can I make it work?

  Hello

  Please, try the Troubleshooting Windows App tool mentioned here and see if this helps you:

  http://www.kapilarya.com/download-Microsoft-account-Windows-store-apps-troubleshooters

  Let us know if this helped you.

  Hope this helps, good luck :)

• HP m9500z is crushed, able to reboot and restore, now no start HP screen, just hangs

  HP m9500z is crushed, able to reboot and restore, now no start HP screen, just hangs. After disconnecting the power for several hours, I was able to get the system running, ran scans disk for errors, no problem.  a few minutes after vista is that it crashed again.  When you restart the fans launched full speed, no start hp at the start screen, nothing.  I tried to reset the CMOS using the jumper trick, nothing.  removed the battery, nothing.  I even tried the blind stuff, I have seen suggested, as pressing F10 for 8 seconds, etc..  during one of the last times before that it's totally off I ran the diagnostic of the system BIOS, everything was fine.  I think I have a corrupted bios.  Any ideas? Could be a motherboard fried, but I hope that its not so bad.  Product num nh836av-aba.

  From your description, I would unplug the video card and the video shipped by train.  The specifications of your mb should be these: http://support.hp.com/us-en/document/c01635688

  Please make sure you have an esd protection and immerse in your unit without first physically disconnect power to the wall outlet

• When I try to update for cc 2015 the hook of the installation and all I get is waiting... How to prevent installation of hanging 2015?

  How to prevent installation of hanging 2015?

  In another thread, someone suggested to open the Task Manager and the removal of all the processes that have to do with Adobe. It worked!

• Have Photoshop 7.0.1 - recently left economy as or save pictures after the changes. Just hangs until I have kill the process with the Task Manager. Have uninstalled and reinstalled. Any suggestions? I don't want to upgrade to CC I hate subscription servic

  Just hangs until I have kill the process with the Task Manager. Have uninstalled and reinstalled. Any suggestions? I don't want to upgrade to CC because I hate subscription services and I often internet connection services interuppted.

  What operating system do you use?

  Reset the photoshop preferences could cure the problem.

  Press and hold down the Shift + Ctrl + Alt keys right after the beginning of the launch of photoshop 7

  (Shift-command-Option on mac)

  Keep possession of the keys down until you get a dialog box asking if you want to delete the adobe photoshop settings file

  Press Yes

• Creative cloud is not updated, just hangs

  The update crashes just for hours. What should do? On a new laptop with Windows 8.

  Hello

  Please refer to the following instructions:

  Error download or update Adobe Creative Cloud applications

  Download and install Adobe Creative Cloud apps

  Solve the problems of downloading and installation of Adobe Creative Cloud

  Installation of updates: stuck at 0%

  Re: creative cloud hangs at 42%

  Let us know if that helps.

  Kind regards

  BANI

• New HP Officejet 7610. You do not have voice mail or fax, just hang on to my computer, how can I?

  I am trying to install and to set up my new HP Officejet 7610 full-size all-in-one.   I have a 21.5 "new Imac I want to hang up.   I'm not planning to use fax or voice mail, just connect to my computer.    I use the scanner and printing of formatted text and pictures and the leaves of large pages.   I use this as a personal printer in my house.   I am connected to my Imac by ADSL via an external modem to the telephone company.   I would like to know how to plug my connections and if I still need to use a DSL filter and a parallel splitter.   What I must have the fax job or can it be turned off.    I'm not as tech savvy as I have always used a very old Mac til now, and more I'm getting too old to understand this myself.   Appreciate any help.

  Welcome to the oldrelic forums

  I read your post about wanting to set up your HP Officejet 7610 Wide Format e-all-in-one printer - H912a and do not use the fax. Do not plug the fax if you do not use. To set up the printer and install it on your Mac, I'll share some links with you below to help you with that! Regarding the printer itself, follow the on-screen instructions for you through the whole upward.

  Install / uninstall software & drivers

  Best wishes

• New updates doesn't work not just hangs

  When my "firefox updated" message comes up the bar shows the download going but then blocks just showing bars blue little - if left can go on for days without anything actually happening.

  Go to www.getfirefox.com and download Firefox 18.0.2

• Why FF act as if each start is a new installation and hang on to old tabs?

  I updated Firefox to version 8.0.1 to 9.0.1 about an hour ago, and it has been wrong since. I suspect it's a matter of preference, but I'm not sure.

  Every time I have start FF (or restart), he seems to think that this is the first time, it was run / installed. It checks the compatibility of each extension, once again.

  It also opens a new page in "Welcome to Firefox hooray... "as if it were a new installation. Each time, it adds a new tab with this message. Address, it opens:

  http://www.Mozilla.org/en-us/Firefox/9.0.1/whatsnew/

  In addition, it does not follow my load on startup home page settings. It sticks with the old tab rather than that it should open.

  I've already gone through and tried to use the information on the pages of the forum helps:

  https://support.Mozilla.org/en-us/KB/Firefox%20Has%20just%20updated%20tab%20shows%20each%20time%20You%20start%20firefox?s=page+opens+on+startup & r = 8 & As = s

  and

  https://support.Mozilla.org/en-us/KB/preferences%20are%20not%20saved

  They do not seem to have helped matters. Of course, I don't know exactly which lines in the Prefs.js file should be deleted, but I took:

  user_pref ("browser.tabs.closeWindowWithLastTab", false);
  user_pref ("browser.taskbar.lastgroupid", "Mozilla.Firefox.8.0.1");

  ... and the problems persist. I don't want to go lift more information that I do not understand. Thanks for any help.

  Oh, and I made sure there is no running session restore feature, AFAIK (including TabMixPlus). My settings of homepage in the menu Options are correct.

  To summarize:

  (1) stop FF to think every start/restart is a new installation.
  (2) get my home page to load to the correct address.

  I don't know what the problem with the old profile, and in this case, it is easier to try a new profile, that spend a lot of time to devote to what is wrong. It could be a prefs.js file or a problem with the registry extensions file or a problem with the files sessionstore or something else.

• When I connect to a server that is not responding, Firefox displays an error message. It just hangs there.

  I had two incidents recently where FireFox will simply display a blank screen. In both cases when I tried the same website in Google Chrome, Chrome displays an error message which helped me to solve the problem. Firefox just sits there without understanding. I can't find a check in FireFox options box that says: "display system error messages. How can I do this? I prefer FireFox to Chrome, but if FireFox didn't tell me what the problem is, I can't use it. This problem has cost me more than a week in a recent update of the site.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls
  • http://KB.mozillazine.org/Error_loading_websites
  • https://support.Mozilla.com/kb/error+loading+Web+sites